Chemical and Thermal Characteristics of PEF-Pretreated Strawberries Dried by Various Methods.

By increasing the permeability of the cell membrane of the treated material, pulsed electric fields (PEF) enhance the internal transport of various chemical substances. Changing the distribution of these components can modify the chemical and thermal properties of the given material. This study aimed to analyze the impact of PEF (1 kV/cm; 1 and 4 kJ/kg) applied to strawberries prior to drying by various methods (convective, infrared-convective, microwave-convective, and vacuum) on the chemical and thermal properties of the obtained dried materials (sugars content, total phenolic content, and antioxidant capacity (ABTS and DPPH assays); thermal properties (TGA and DSC); and molecular composition (FTIR)). PEF could have induced and/or enhanced sucrose inversion because, compared to untreated samples, PEF-pretreated samples were characterized by a lower share of sucrose in the total sugar content but a higher share of glucose and fructose. Reduced exposure to oxygen and decreased drying temperature during vacuum drying led to obtaining dried strawberries with the highest content of antioxidant compounds, which are sensitive to these factors. All PEF-pretreated dried strawberries exhibited a lower glass transition temperature (Tg) than the untreated samples, which confirms the increased mobility of the system after the application of an electric field.

The Impact of Drying Methods on the Quality of Blanched Yellow Mealworm (Tenebrio molitor L.) Larvae.

The growing world population necessitates the implementation of appropriate processing technologies for edible insects. The objective of this study was to examine the impact of distinct drying techniques, including convective drying at 70 °C (70CD) and 90 °C (90CD) and freeze-drying (FD), on the drying kinetics, physical characteristics (water activity, color), chemical characteristics (chemical composition, amino acid profile, oil properties, total polyphenol content and antioxidant activity, mineral composition, FTIR), and presence of hazards (allergens, microorganisms) of blanched yellow mealworm larvae. The freeze-drying process results in greater lightness and reduced moisture content and water activity. The study demonstrated that the freeze-dried insects exhibited lower contents of protein and essential amino acids as compared to the convective-dried insects. The lowest content of total polyphenols was found in the freeze-dried yellow mealworm larvae; however, the highest antioxidant activity was determined for those insects. Although the oil isolated from the freeze-dried insects exhibited the lowest acid and peroxide values, it proved to have the lowest PUFA content and oxidative stability. All the samples met the microbiological criteria for dried insects. The results of the study demonstrate that a high temperature during the CD method does not result in the anticipated undesirable changes. It appears that freeze-drying is not the optimal method for preserving the nutritional value of insects, particularly with regard to the quality of protein and oil.

Influence of High-Pressure Homogenization on the Physicochemical Properties and Betalain Pigments of Red Beetroot (Beta vulgaris L.) Juice.

High-pressure homogenization (HPH) is considered an innovative and modern method of processing and preserving liquid and semi-liquid foods. The aim of this research was to examine the impact of HPH processing on the content of betalain pigments and physicochemical properties of beetroot juice. Combinations of the following HPH parameters were tested: the pressure used (50, 100, 140 MPa), the number of cycles (1 and 3) and the applied cooling or no cooling. The physicochemical analysis of the obtained beetroot juices was based on the determination of the extract, acidity, turbidity, viscosity and color values. Use of higher pressures and a greater number of cycles reduces the turbidity (NTU) of the juice. Moreover, in order to maintain the highest possible extract content and a slight color change of the beetroot juice, it was crucial to perform sample cooling after the HPH process. The quantitative and qualitative profiles of betalains have been also determined in the juices. In terms of the content of betacyanins and betaxanthins, the highest values were found in untreated juice at 75.3 mg and 24.8 mg per 100 mL, respectively. The high-pressure homogenization process resulted in a decrease in the content of betacyanins in the range of 8.5-20.2% and of betaxanthins in the range of 6.5-15.0%, depending on the parameters used. Studies have shown that that the number of cycles was irrelevant, but an increase in pressure from 50 MPa to 100 or 140 MPa had a negative effect on pigment content. Additionally, juice cooling significantly limits the degradation of betalains in beetroot juice.

The Influence of Pulsed Electric Field and Air Temperature on the Course of Hot-Air Drying and the Bioactive Compounds of Apple Tissue.

Drying is one of the oldest methods of obtaining a product with a long shelf-life. Recently, this process has been modified and accelerated by the application of pulsed electric field (PEF); however, PEF pretreatment has an effect on different properties-physical as well as chemical. Thus, the aim of this study was to investigate the effect of pulsed electric field pretreatment and air temperature on the course of hot air drying and selected chemical properties of the apple tissue of Gloster variety apples. The dried apple tissue samples were obtained using a combination of PEF pretreatment with electric field intensity levels of 1, 3.5, and 6 kJ/kg and subsequent hot air drying at 60, 70, and 80 °C. It was found that a higher pulsed electric field intensity facilitated the removal of water from the apple tissue while reducing the drying time. The study results showed that PEF pretreatment influenced the degradation of bioactive compounds such as polyphenols, flavonoids, and ascorbic acid. The degradation of vitamin C was higher with an increase in PEF pretreatment intensity level. PEF pretreatment did not influence the total sugar and sorbitol contents of the dried apple tissue as well as the FTIR spectra. According to the optimization process and statistical profiles of approximated values, the optimal parameters to achieve high-quality dried apple tissue in a short drying time are PEF pretreatment application with an intensity of 3.5 kJ/kg and hot air drying at a temperature of 70 °C.

Effect of Pulsed Electric Field Technology on the Composition and Bioactive Compounds of Black Soldier Fly Larvae Dried with Convective and Infrared-Convective Methods.

In recent years, an increasing interest has been shown in alternative food sources. Many studies are focused on the use of insects. The aim of this study was to investigate the changes in the chemical and thermal properties of black soldier fly larvae influenced by the pulsed electric field (PEF) and convective (CD) or infrared-convective (IR-CD) drying techniques. Examinations of the basic chemical composition, properties of extracted fat (fatty acid composition, acid and peroxide values, and oxidative stability), total polyphenol content, antioxidant activity, allergen content, and thermogravimetric analysis (TGA) were performed. Generally, the results showed that dried black soldier fly larvae are a good source of protein and fat, up to 33% and 44%, respectively. The fat extracted from the dried insects consisted mainly of saturated fatty acids (above 75%), in particular lauric acid (C12:0). A good oxidative stability of the fat was also observed, especially from samples dried with the IR-CD method. The convective drying technique allowed for better preservation of protein content compared to samples dried with the IR-CD method. Nevertheless, samples treated with PEF were characterized by significantly lower protein content. The samples after PEF pretreatment, with an intensity of 20 and 40 kJ/kg and dried with the IR-CD method, were represented by a significantly higher total polyphenol content and antioxidant activity. Furthermore, in most cases, the convectively dried samples were characterized by a higher allergen content, both crustaceans and mollusks. Taking into account all of the investigated properties, it can be stated that the samples without treatment and those that were PEF-treated with an intensity of 40 kJ/kg and dried with the infrared-convective method (IR-CD) were the most rewarding from the nutritional point of view.

Developments in Plant Proteins Production for Meat and Fish Analogues.

In recent years, there have been significant developments in plant proteins production for meat and fish analogues. Some of the key developments include the use of new plant protein sources such as soy, legumes, grains, potatoes, and seaweed, as well as insect proteins, leaf proteins, mushrooms, and microbial proteins. Furthermore, to improve the technological and functional properties of plant proteins, they can be subjected to traditional and unconventional treatments such as chemical (glycosylation, deamidation, phosphorylation, and acylation), physical (pulsed electric fields, ultrasound, high hydrostatic pressure, dynamic high-pressure treatment, and cold plasma), and biological (fermentation and enzymatic modification). To obtain the high quality and the desired texture of the food product, other ingredients besides proteins, such as water, fat, flavors, binders, dyes, vitamins, minerals, and antioxidants, also have to be used. The final product can be significantly influenced by the matrix composition, variety of ingredients, and water content, with the type of ingredients playing a role in either enhancing or constraining the desired texture of the food. There are several types of technologies used for meat and fish analogues production, including extrusion, shear cell technology, spinning, 3D printing, and others. Overall, the technologies used for meat and fish analogues production are constantly evolving as new innovations are developed and existing methods are improved. These developments have led to the creation of plant-based products that have a similar texture, taste, and nutritional profile to meat and fish, making them more appealing to consumers seeking alternatives to animal-based products.

Effect of Thermal and Non-Thermal Technologies on Kinetics and the Main Quality Parameters of Red Bell Pepper Dried with Convective and Microwave-Convective Methods.

The drying process preserves the surplus of perishable food. However, to obtain a good-quality final product, different pretreatments are conducted before drying. Thus, the aim of the study was the evaluation of the effect of thermal (blanching treatments with hot water) and non-thermal technologies (pulsed electric field (PEF) and ultrasound (US)) on the kinetics of the drying process of red bell pepper. The convective and microwave-convective drying were compared based on quality parameters, such as physical (water activity, porosity, rehydration rate, and color) and chemical properties (total phenolic content, total carotenoids content, antioxidant activity, and total sugars content). The results showed that all of the investigated methods reduced drying time. However, the most effective was blanching, followed by PEF and US treatment, regardless of the drying technique. Non-thermal methods allowed for better preservation of bioactive compounds, such as vitamin C in the range of 8.2% to 22.5% or total carotenoid content in the range of 0.4% to 48%, in comparison to untreated dried material. Moreover, PEF-treated red bell peppers exhibited superior antioxidant activity (higher of about 15.2-30.8%) when compared to untreated dried samples, whereas sonication decreased the free radical scavenging potential by ca. 10%. In most cases, the pretreatment influenced the physical properties, such as porosity, color, or rehydration properties. Samples subjected to PEF and US treatment and dried by using a microwave-assisted method exhibited a significantly higher porosity of 2-4 folds in comparison to untreated material; this result was also confirmed by visual inspection of microtomography scans. Among tested methods, blanched samples had the most similar optical properties to untreated materials; however non-thermally treated bell peppers exhibited the highest saturation of the color.

The Influence of Polyols on the Process Kinetics and Bioactive Substance Content in Osmotic Dehydrated Organic Strawberries.

In recent years, an increasing interest in reducing sugar consumption has been observed and many studies are conducted on the use of polyols in the osmotic dehydration process to obtain candied or dried fruits. The studies in the literature have focused on the kinetics of the process as well as the basic physical properties. In the scientific literature, there is a lack of investigation of the influence of such polyol solutions such as sorbitol and mannitol used as osmotic substances during the osmotic dehydration process on the contents of bioactive components, including natural colourants. Thus, the aim of the study was to evaluate the impact of polyols (mannitol and sorbitol) in different concentrations on the process kinetics and on chosen physical (colour and structural changes) as well as chemical (sugars and polyol content, total anthocyanin content, total polyphenol content, vitamin C, antioxidant activity) properties of osmotic-dehydrated organic strawberries. Generally, the results showed that the best solution for osmotic dehydration is 30% or 40% sorbitol solutions, while mannitol solution is not recommended due to difficulties with preparing a high-concentration solution and its crystallization in the tissue. In the case of sorbitol, the changes of bioactive compounds, as well as colour change, were similar to the sucrose solution. However, the profile of the sugar changed significantly, in which sucrose, glucose, and fructose were reduced in organic strawberries and were partially replaced by polyols.

The Quality of Infrared Rotary Dried Terebinth (Pistacia atlantica L.)-Optimization and Prediction Approach Using Response Surface Methodology.

Most agricultural products are harvested with a moisture content that is not suitable for storage. Therefore, the products are subjected to a drying process to prevent spoilage. This study evaluates an infrared rotary dryer (IRRD) with three levels of infrared power (250, 500, and 750 W) and three levels of rotation speed (5, 10, and 15 rpm) to dry terebinth. Response surface methodology (RSM) was used to illustrate and optimize the interaction between the independent variables (infrared power and rotation speed) and the response variables (drying time, moisture diffusivity, shrinkage, color change, rehydration rate, total phenolic content, and antioxidant activity). As infrared power and rotation speed increased, drying time, rehydration rate, antioxidant activity, and total phenolic content decreased, while the other parameters were increased. According to the results, the optimum drying conditions of terebinth were determined in the IRRD at an infrared power of 250 W and drum rotation speed of 5 rpm. The optimum values of the response variables were 49.5 min for drying time, 8.27 × 10-9 m2/s for effective moisture diffusivity, 2.26 for lightness, 21.60 for total color changes, 34.75% for shrinkage, 2.4 for rehydration rate, 124.76 mg GAE/g d.m. for total phenolic content and 81% for antioxidant activity.

Effect of nonthermal treatments on selected natural food pigments and color changes in plant material.

In recent years, traditional high-temperature food processing is continuously being replaced by nonthermal processes. Nonthermal processes have a positive effect on food quality, including color and maintaining natural food pigments. Thus, this article describes the influence of nonthermal, new, and traditional treatments on natural food pigments and color changes in plant materials. Characteristics of natural pigments, such as anthocyanins, betalains, carotenoids, chlorophylls, and so forth available in the plant tissue, are shortly presented. Also, the characteristics and mechanism of nonthermal processes such as pulsed electric field, ultrasound, high hydrostatic pressure, pulsed light, cold plasma, supercritical fluid extraction, and lactic acid fermentation are described. Furthermore, the disadvantages of these processes are mentioned. Each treatment is evaluated in terms of its effects on all types of natural food pigments, and the possible applications are discussed. Analysis of the latest literature showed that the use of nonthermal technologies resulted in better preservation of pigments contained in the plant tissue and improved yield of extraction. However, it is important to select the appropriate processing parameters and to optimize this process in relation to a specific type of raw material.

The Effect of Traditional and Non-Thermal Treatments on the Bioactive Compounds and Sugars Content of Red Bell Pepper.

The aim of the study was an investigation of the effect of traditional and non-thermal treatment on the bioactive compounds of red bell pepper. As a thermal process, blanching in water and in steam was studied, while for non-thermal the sonication, pulsed electric field treatment and their combination were used in this experiment. The red bell peppers were evaluated based on quality attributes such as: total carotenoids content; polyphenols; vitamin C; antioxidant activity and sugars content. Vitamin C and sugar content were analyzed using liquid chromatography and other measurements were determined based on the spectrophotometric method. Results showed that the blanching in water or in steam reduced bioactive compounds concentration; whereas non-thermal treatments as pulsed electric field (PEF) applied separately or in combination with ultrasound (US + PEF) let to obtain similar or slightly lower content of bioactive compounds in comparison to untreated peppers. When sonication (US) and combined treatment as PEF + US were applied; in most cases reduction of bioactive compounds concentration occurred. This effect was probably related to the effect of relatively long (30 min) ultrasound treatment. The application of appropriate parameters of non-thermal processing is crucial for the high quality of processed material.

Design of Healthy Snack Based on Kiwifruit.

Kiwifruit is an excellent source of vitamin C and other bioactive compounds, which contribute to its high antioxidant activity. However, the fruits with small size and low weight are considered waste and are unprofitable; therefore, the production of healthy kiwifruit-based dried snacks, which contain a lot of health-beneficial ingredients, could be a viable alternative for their use. The aim of this study was to develop formulations and methods to produce attractive and nutritionally valuable dried snacks based on yellow kiwifruit. Three different puree formulations (kiwifruit; fennel; and strawberry, lemon, or spinach) with or without addition of sugar were subjected to two drying methods: freeze-drying (fruit bars) and conventional hot air drying (fruit leathers). The obtained products were analysed for their content of total polyphenols (TPs), flavonoids, and vitamin C, as well as their antioxidant activity. The results showed that snacks prepared by freeze-drying (fruit bars) presented higher TP, vitamin C, and flavonoids content than those prepared by convective drying; however, the antioxidant activity did not always follow this trend. The amount of bioactive compounds depended on the formulation used for the preparation of snacks. The effect of the sugar addition seems to be strictly related to the mix used and specific bioactive compound investigated.

Postharvest Monitoring of Tomato Ripening Using the Dynamic Laser Speckle.

The dynamic laser speckle (biospeckle) method was tested as a potential tool for the assessment and monitoring of the maturity stage of tomatoes. Two tomato cultivars—Admiro and Starbuck—were tested. The process of climacteric maturation of tomatoes was monitored during a shelf life storage experiment. The biospeckle phenomena were captured using 640 nm and 830 nm laser light wavelength, and analysed using two activity descriptors based on biospeckle pattern decorrelation—C4 and ε. The well-established optical parameters of tomatoes skin were used as a reference method (luminosity, a*/b*, chroma). Both methods were tested with respect to their prediction capabilities of the maturity and destructive indicators of tomatoes—firmness, chlorophyll and carotenoids content. The statistical significance of the tested relationships were investigated by means of linear regression models. The climacteric maturation of tomato fruit was associated with an increase in biospckle activity. Compared to the 830 nm laser wavelength the biospeckle activity measured at 640 nm enabled more accurate predictions of firmness, chlorophyll and carotenoids content. At 640 nm laser wavelength both activity descriptors (C4 and ε) provided similar results, while at 830 nm the ε showed slightly better performance. The linear regression models showed that biospeckle activity descriptors had a higher correlation with chlorophyll and carotenoids content than the a*/b* ratio and luminosity. The results for chroma were comparable with the results for both biospeckle activity indicators. The biospeckle method showed very good results in terms of maturation monitoring and the prediction of the maturity indices of tomatoes, proving the possibility of practical implementation of this method for the determination of the maturity stage of tomatoes.

Investigation of the Structure-Forming Potential of Protein Components in the Reformulation of the Composition of Edible Films.

To optimize the functional properties of edible films or coatings, mixtures of several ingredients are used, including food processing by-products. In this way, pectin from fruit pomace, whey proteins from whey as a by-product of rennet cheese production, and gelatin from by-products of the processing of slaughtered animals can be obtained. The aim and scope of the investigation were to verify the hypothesis of the research, which assumes that the addition of beef broth to edible gelatin films will affect the gelation processes of the tested film-forming solutions and will allow for the modification of the edible properties of the films obtained based on these solutions. Measurements were carried out to determine the visual parameters, mechanical strengths, surface and cross-sectional structures, FTIR spectra, thermal degradation rates, and hydrophilicities of the prepared gelatin films. The water content, water vapor permeability, and course of water vapor sorption isotherms of the films were also examined, as well as the course of the gelation process for film-forming solutions. The addition of broth to film-forming solutions was found to increase their opacity and color saturation, especially for the ones that were yellow. The films with the addition of broth were more uneven on the surface and more resistant to stretching, and in the case of the selected types of gelatins, they also formed a more stable gel. The broth increased the hydrophilicity and permeability of the water vapor and reduced the water content of the films. The addition of broth enables the practical use of edible films, but it is necessary to modify some features.

Development and Characteristics of Protein Edible Film Derived from Pork Gelatin and Beef Broth.

The aim of this work was to develop edible films derived from gelatin and beef broth and to analyze the physical properties of the output products. The presented research is important from the point of view of searching for food packaging solutions that may replace traditionally used plastic packaging. This study's conceptual framework is in line with the trend of sustainable development and zero waste. This study was conducted to develop a recipe for edible films derived from beef gelatin with gelatin concentrations at 4%, 8%, and 12% enriched with additions of beef broth in amounts of 25, 50, 75, and 100%. Selected physical properties of the output edible films were examined in terms of thickness, swelling in water, opacity, water content, water solubility, structure, and mechanical properties. The conducted research made it plausible to conclude that the addition of broth has a positive effect on the extensibility of the edible films and the other physical properties under consideration, especially on decreasing the film thickness, which was found to vary between 50.2 and 191.6 µm. When gelatin and broth were added at low concentrations, the tensile strength of the films increased, and subsequently decreased; however, an opposite effect was observed for elongation at break. The increased broth concentration caused the film opacity to increase from 0.39 to 4.54 A/mm and from 0.18 to 1.04 A/mm with gelatin concentrations of 4% and 12%, respectively. The water solubility of the gelatin films decreased as a result of the broth addition. However, it was noticed that increasing the content of broth caused the water solubility to increase in the tested films. The mere presence of broth in the gelatin films changed the microstructure of the films and also made them thinner.

Combined effect of ultrasound and vacuum impregnation for the modification of apple tissue enriched with aloe vera juice.

The aim of the work was to investigate how ultrasonic (US) treatment impacts on the physical and chemical properties of vacuum-impregnated apples. Apple slices were subjected to vacuum impregnation (VI) in an Aloe vera juice solution without additional treatments, serving as the reference material. Alternatively, ultrasound (US) treatments, at frequencies of 25 or 45 kHz, and durations of 10, 20, or 30 min, were employed as a pre-treatments before the VI process. The use of US processing enabled a significant increase in the efficiency of VI, without influencing in a significant way the color of the VI samples. The VI process led to a reduction in the content of bioactive compounds, in particular vitamin C and TPC decreased by 34 and 32 %, respectively. The use of US as a pre-treatment, in particular at 45 kHz for 20 or 30 min, led to a better preservation of these compounds (unchanged values for vitamin C and decrease by 23-26 % for TPC in comparison to the fresh samples). Through cluster analysis encompassing all assessed properties, it was evident that US treatment was beneficial for the processing, however the application of appropriate parameters of US treatment (frequency and time) had an impact on achieving similar quality to VI samples. The ultrasound treatment before vacuum impregnation may be suitable, however, the specific processing parameters should be defined for the obtained high quality of the final product.

Impact of Ultrasound Pre-Treatment on the Drying Kinetics and Quality of Chicken Breast-A Comparative Study of Convective and Freeze-Drying Methods.

Fresh meat has a limited shelf life and is prone to spoilage. Drying serves as a common method for food preservation. Non-thermal techniques such as ultrasound treatment (US) can positively affect the drying processes and alter the final product. The study aimed to evaluate the impact of US pre-treatment on the hot air (HA) and freeze-drying (FD) of chicken breast meat and the quality of the dried products. US pre-treatment had a varied impact depending on the drying method used. The contact US method extended the HA drying time (about 50%) but improved water removal during FD (about 30%) compared to the untreated samples. Both methods resulted in low water content (<8.3%) and low water activity (<0.44). While rehydration properties (RR) and hygroscopicity (H) were not significantly affected by US pre-treatment in HA drying (about 1.35% and about 1.1, respectively), FD noticed differences due to shrinkage and porosity variations (RR: 2.4-3.2%, H: 1.19-1.25). The HA-dried samples exhibited notably greater tissue shrinkage and a darker surface color than the FD meat. Ultrasonic processing holds substantial potential in creating dried meat products with tailored characteristics. Hence, meticulous consideration of processing methods and parameters is of utmost importance.

The Potential of Edible Films, Sheets, and Coatings Based on Fruits and Vegetables in the Context of Sustainable Food Packaging Development.

Several consumable substances, including fruit and vegetable purees, extracts, juices, and plant residue, were analyzed for their matrix-forming potential. These matrices serve as the basis for the production of edible films, sheets, and coatings that can be eaten as nutritional treats or applied to food products, thereby contributing to their overall good quality. Furthermore, this innovative approach also contributes to optimizing the performance of synthetic packaging, ultimately reducing reliance on synthetic polymers in various applications. This article explores the viability of incorporating fruits and vegetables as basic ingredients within edible films, sheets, and coatings. The utilization of fruits and vegetables in this manner becomes achievable due to the existence of polysaccharides and proteins that facilitate the formation of matrices in their makeup. Moreover, including bioactive substances like vitamins and polyphenols can impart attributes akin to active materials, such as antioxidants or antimicrobial agents. Advancing the creation of edible films, sheets, and coatings derived from fruits and vegetables holds great potential for merging the barrier and mechanical attributes of biopolymers with the nutritional and sensory qualities inherent in these natural components. These edible films made from fruits and vegetables could potentially serve as alternatives to seaweed in sushi production or even replace conventional bread, pancakes, tortillas, and lavash in the diet of people suffering from celiac disease or gluten allergy, while fruit and vegetable coatings may be used in fresh and processed food products, especially fruits and vegetables but also sweets.

Effect of the Pulsed Electric Field Treatment on Physical, Chemical and Structural Changes of Vacuum Impregnated Apple Tissue in Aloe Vera Juices.

Vacuum impregnation (VI) stands as a diffusion-driven food processing method that has found recent application within the food industry, particularly for the cold formulation of fortified food products. Pulsed electric field (PEF) treatment can affect the food structure, influencing therefore the mass transfer phenomena during the further processing. Thus, the study aimed at investigating the effect of PEF treatment on selected physicochemical properties of vacuum-impregnated apples. Apple slices were vacuum impregnated with aloe vera juice solution with or PEF treatment at different intensities (125, 212.5 or 300 V/cm). The PEF was applied as a pretreatment-applied before the VI process as well as posttreatment-applied after the VI process. The VI process with aloe vera juice resulted in a sample weight increase of over 24% as well as structural changes, partial cell viability loss and color alteration. In addition, the decrease of bioactive compounds was observed, while antioxidant activity remained at a similar level as in raw material. PEF treatment adversely affected vacuum impregnation efficiency, causing microstructural changes and cell viability loss. Additionally, chemical composition modifications were evident through thermogravimetric analysis (TGA) and Fourier Infrared Spectroscopy (FTIR) analyses. Tissue hardness decreased significantly due to structural damage and caused high leakage from plant tissue, which resulted in hindering saturation with aloe vera juice during the VI process. Additionally, reduced bioactive substance content after PEF treatment was observed and the VI process did not restore apple samples of the bioactive compounds from aloe vera juice.

Starch modification through its combination with other molecules: Gums, mucilages, polyphenols and salts.

Apart from its non-toxicity, biocompatibility and biodegradability, starch has demonstrated eminent functional characteristics, e.g., forming well-defined gels/films, stabilizing emulsions/foams, and thickening/texturizing foods, which make it a promising hydrocolloid for various food purposes. Nonetheless, because of the ever-increasing range of its applications, modification of starch via chemical and physical methods for expanding its capabilities is unavoidable. The probable detrimental impacts of chemical modification on human health have encouraged scientists to develop potent physical approaches for starch modification. In this category, in recent years, starch combination with other molecules (i.e., gums, mucilages, salts, polyphenols) has been an interesting platform for developing modified starches with unique attributes where the characteristics of the fabricated starch could be finely tuned via adjusting the reaction parameters, type of molecules reacting with starch and the concentration of the reactants. The modification of starch characteristics upon its complexation with gums, mucilages, salts, and polyphenols as common ingredients in food formulations is comprehensively overviewed in this study. Besides their potent impact on physicochemical, and techno-functional attributes, starch modification via complexation could also remarkably customize the digestibility of starch and provide new products with less digestibility.