RESUMEN
An unconventional approach using the time-of-flight secondary ion mass spectrometry (TOF-SIMS) technique to determine the height topography at the microscale is detailed in this work with an application to cotton paper banknotes. The study was conducted by determining the effect of all related factors and parameters on the height measurement by taking the simplest model made from two Post-it sheets. For each sample, the difference in the TOF of the same secondary ion coming from two different heights was successfully attributed to the step height of the studied areas' topography, which was measured using classic methods. The measurement was independent of the orientation of the topography with regard to the primary ion beam and the electron beam azimuth. Moreover, the adjustment of the extraction gap with different layers has no effect on such measurements. However, a range of the analyzer acceptance energy values could be considered to achieve the expected outcomes only if the different analyzers' component energies are also changing accordingly. Heights between 20 and 180 µm were successfully measured using this new method. An added benefit to this method over other height measurement methods is the ability to discern areas with different chemical compositions, which eventually may help aid understanding of the sample in question.
RESUMEN
In order to evaluate the potential of accelerator based analytical techniques ((particle induced X-ray emission (PIXE), particle induced gamma-ray emission (PIGE), and particle desorption mass spectrometry (PD-MS)) for the analysis of commercial pharmaceutical products in their solid dosage form, the fluphenazine drug has been taken as a representative example. It is demonstrated that PIXE and PIGE are by far the best choice for quantification of the active ingredient (AI) (certification with 7% precision) from the reactions induced on its specific heteroatoms fluorine and sulfur using pellets made from original tablets. Since heteroatoms cannot be present in all types of drugs, the PD-MS technique, which makes easily the distinction between AI(s) and excipients, has been evaluated for the same material. It is shown that the quantification of AI is obtained via the detection of its protonated molecule. However, calibration curves have to be made from the secondary ion yield variations since matrix effects of various nature are characteristics of such mixtures of heterogeneous materials (including deposits from soluble components). From the analysis of solid tablets, (either transformed into pellets and even as received), it is strongly suggested that the physical state of the grains in the mixture is a crucial parameter in the ion emission and accordingly for the calibration curves. As a result of our specific (but not optimized) conditions the resulting precision is <17% with an almost linear range extending from 0.04 to 7.87 mg of AI in a tablet made under the manufacturer conditions (the commercial drug product is labeled at 5 mg).
Asunto(s)
Antipsicóticos/análisis , Flufenazina/análisis , Espectrometría de Masas/métodos , Antipsicóticos/normas , Formas de Dosificación , Flúor/química , Flufenazina/normas , Rayos gamma , Espectrometría de Masas/instrumentación , Espectrometría de Masas/normas , Control de Calidad , Azufre/química , Rayos XRESUMEN
This study is a multi-technique investigation of the Paris carbonaceous chondrite directly applied on two selected 500 × 500 µm² areas of a millimetric fragment, without any chemical extraction. By mapping the partial hydration of the amorphous silicate phase dominating the meteorite sample matrix, infrared spectroscopy gave an interesting glimpse into the way the fluid may have circulated into the sample and partially altered it. The TOF-SIMS in-situ analysis allowed the studying and mapping of the wide diversity of chemical moieties composing the meteorite organic content. The results of the combined techniques show that at the micron scale, the organic matter was always spatially associated with the fine-grained and partially-hydrated amorphous silicates and to the presence of iron in different chemical states. These systematic associations, illustrated in previous studies of other carbonaceous chondrites, were further supported by the identification by TOF-SIMS of cyanide and/or cyanate salts that could be direct remnants of precursor ices that accreted with dust during the parent body formation, and by the detection of different metal-containing large organic ions. Finally, the results obtained emphasized the importance of studying the specific interactions taking place between organic and mineral phases in the chondrite matrix, in order to investigate their role in the evolution story of primitive organic matter in meteorite parent bodies.
RESUMEN
Poly(ethylene terephthalate) (PET) substrates were modified by means of surface-initiated supplemental activator and reducing agent atom transfer radical polymerization (SI-SARA-ATRP) of 4-vinylpyridine (4VP). Substrates were pretreated in order to graft chloromethylbenzene (CMB) units capable of initiating the radical polymerization reaction of 4VP units. Surface characterization techniques, including Water Contact Angle (WCA), Attenuated Total Reflection (ATR), X-ray photoelectron spectroscopy (XPS), Atomic Force Microscopy (AFM) and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) showed a successful grafting of a stable, smooth and homogenous layer of p4VP. This process offers the advantages of a rapid, simplified and low cost strategy to chemically modify polymer substrates with covalently bonded layer of the pH responsive p4VP for different applications. Moreover, by using TOF-SIMS profiling, we were able to track a density gradient along the z-axis generated by the interpenetrating phases of the different layers of the final modified surface. Fact that we correlated to the various positions of initiation sites within the polyethylenimine (PEI) used for PET aminolysis prior to CMB grafting. Our strategy will be used in future work to graft other polymers for different applications where industrial scale viable options are needed.
RESUMEN
The aim of the present study was to quantify some nutritional and safety quality parameter changes that take place in nuts (roasting) and sesame seeds (dehulling, roasting, milling, and sterilization) during processing. Such evaluation was based on chemical analysis of various indicators of lipid alteration in raw and processed pistachios, almonds, peanuts, and tahina. Lipid oxidation was assessed by the evolution of lipid oxidation products including hydroperoxides, p-anisidine, and thiobarbituric acid reactive substances, as well as carboxymethyllysine (CML) and trans fatty acids (tFAs). All these parameters were significantly affected by the different processing stages, especially by roasting and sterilization (tahina). Nut roasting and sesame heat treatment increased the primary (hydroperoxides) and secondary (aldehydic compounds) lipid oxidation products, with the p-anisidine value reaching 6-11.5 and thiobarbituric acid reactive substances 3-5 mg/kg (equiv of malondialdehyde) in the different end products. In addition, roasting led to the formation of CML (between 12.7 and 17.7 ng/mg) and tFAs (between 0.6 and 0.9 g/100 g) in nuts and tahina, which were absent in the raw material. Roasting parameters appear as the critical factor to control to limit the CML and tFA formation in the final product.