RESUMEN
Dianionic hyponitrite (N2 O22- ) is often proposed, based on model complexes, as the key intermediate in reductive coupling of nitric oxide to nitrous oxide at the bimetallic active sites of heme-copper oxidases and nitric oxide reductases. In this work, we examine the gas-solid reaction of nitric oxide with the metal-organic framework CuI -ZrTpmC* with a suite of in situ spectroscopies and density functional theory simulations, and identify an unusual chelating N2 O2.- intermediate. These results highlight the advantage provided by site-isolation in metal-organic frameworks (MOFs) for studying important reaction intermediates, and provide a mechanistic scenario compatible with the proposed one-electron couple in these enzymes.
RESUMEN
Mononuclear and dinuclear copper species were synthesized at the nodes of an NU-1000 metal-organic framework (MOF) via cation exchange and subsequent oxidation at 200 °C in oxygen. Copper-exchanged MOFs are active for selectively converting methane to methanol at 150-200 °C. At 150 °C and 1 bar methane, approximately a third of the copper centers are involved in converting methane to methanol. Methanol productivity increased by 3-4-fold and selectivity increased from 70% to 90% by increasing the methane pressure from 1 to 40 bar. Density functional theory showed that reaction pathways on various copper sites are able to convert methane to methanol, the copper oxyl sites with much lower free energies of activation. Combining studies of the stoichiometric activity with characterization by in situ X-ray absorption spectroscopy and density functional theory, we conclude that dehydrated dinuclear copper oxyl sites formed after activation at 200 °C are responsible for the activity.
RESUMEN
Truxene derivatives, due to their molecular structure and properties, are good candidates for the passivation of defects when deposited onto hybrid lead halide perovskite thin films. Moreover, their semiconductor characteristics can be tailored through the modification of their chemical structure, which allows-upon light irradiation- the interfacial charge transfer between the perovskite film and the truxene molecules. In this work, we analysed the use of the molecules as surface passivation agents and their use in complete functional solar cells. We observed that these molecules reduce the non-radiative carrier recombination dynamics in the perovskite thin film through the supramolecular complex formation between the Truxene molecule and the Pb2+ defects at the perovskite surface. Interestingly, this supramolecular complexation neither affect the carrier recombination kinetics nor the carriers collection but induced noticeable hysteresis on the photocurrent vs voltage curves of the solar cells under 1 sun illumination.
RESUMEN
Some metal-organic frameworks (MOFs) incorporate nodes that are metal oxide clusters such as Zr6O8. Vacancies on the node surfaces, accidental or by design, act as catalytic sites. Here, we report elucidation of the chemistry of Zr6O8 nodes in the MOFs UiO-66 and UiO-67 having used infrared and nuclear magnetic resonance spectroscopies to determine the ligands on the node surfaces originating from the solvents and modifiers used in the syntheses and having elucidated the catalytic properties of the nodes for ethanol dehydration, which takes place selectively to make diethyl ether but not ethylene at 473-523 K. Density functional theory calculations show that the key to the selective catalysis is the breaking of node-linker bonds (or the accidental adjacency of open/defect sites) that allows catalytically fruitful bonding of the reactant ethanol to neighboring sites on the nodes, facilitating the bimolecular ether formation through an SN2 mechanism.
RESUMEN
Copper is ubiquitous and its one-electron redox chemistry is central to many catalytic processes. Modeling such chemistry requires electronic structure methods capable of the accurate prediction of ionization energies (IEs) for compounds including copper in different oxidation states and supported by various ligands. Herein, we estimate IEs for 12 mononuclear Cu species previously reported in the literature by using 21 modern density functionals and the DLPNO-CCSD(T) wave function theory model; we consider extrapolated values of the latter to provide reference values of acceptable accuracy. Our results reveal a considerable diversity in functional performance. Although there is nearly always at least one functional that performs well for any given species, there are none that do so for every member of the test set, and certain cases are particularly pathological. Over the entire test set, the SOGGA11-X functional performs best with a mean unsigned error (MUE) of 0.22â eV. PBE0, ωB97X-D, CAM-B3LYP, M11-L, B3LYP, and M11 exhibit MUEs ranging between 0.23 and 0.34â eV. When including relativistic effects with the zero-order regular approximation, ωB97X-D, CAM-B3LYP, and PBE0 are found to provide the best accuracy.
RESUMEN
The spontaneous rearrangement of allylic azides is thought to be a sigmatropic reaction. Presented herein is a detailed investigation into the rearrangement of several allylic azides. A combination of experiments including equilibrium studies, kinetic analysis, density functional theory calculations, and selective 15N-isotopic labeling are included. We conclude that the Winstein rearrangement occurs by the assumed sigmatropic pathway under most conditions. However, racemization was observed for some cyclic allylic azides. A kinetic analysis of this process is provided, which supports a previously undescribed ionic pathway.
Asunto(s)
Compuestos Alílicos/química , Azidas/química , Catálisis , EstereoisomerismoRESUMEN
Density functional theory (DFT) is employed to characterize in detail the mechanism for the ring-opening polymerization (ROP) of ε-caprolactone catalyzed by iron alkoxide complexes bearing redox-active bis(imino)pyridine ligands. The combination of iron with the non-innocent bis(imino)pyridine ligand permits comparison of catalytic activity as a function of oxidation state (and overall spin state). The reactivities of aryl oxide versus alkoxide initiators for the ROP of ε-caprolactone are also examined. An experimental test of a computational prediction reveals an Fe(III) bis(imino)pyridine bis-neopentoxide complex to be competent for ROP of ε-caprolactone.
RESUMEN
Amino-functionalized zirconium-based metal-organic frameworks (MOFs) have shown unprecedented catalytic activity compared to non-functionalized analogues for hydrolysis of organophosphonate-based toxic chemicals. Importantly, the effect of the amino group on the catalytic activity is significantly higher in the case of UiO-66-NH2 , where the amino groups reside near the node, compared to UiO-67-m-NH2 , where they are directed away from the node. Herein, we show that the proximity of the amino group is crucial for fast catalytic activity towards hydrolysis of organophosphonate-based nerve agents. The generality of the observed amine-proximity-dictated catalytic activity has been tested on two different MOF systems which have different topology. DFT calculations reveal that amino groups on all the MOFs studied are not acting as Brønsted bases; instead they control the microsolvation environment at the Zr6 -node active site and therefore increase the overall catalytic rates.
Asunto(s)
Aminas/química , Agentes Nerviosos/química , Catálisis , Hidrólisis , Estructuras Metalorgánicas/química , Circonio/químicaRESUMEN
Copper oxide clusters synthesized via atomic layer deposition on the nodes of the metal-organic framework (MOF) NU-1000 are active for oxidation of methane to methanol under mild reaction conditions. Analysis of chemical reactivity, in situ X-ray absorption spectroscopy, and density functional theory calculations are used to determine structure/activity relations in the Cu-NU-1000 catalytic system. The Cu-loaded MOF contained Cu-oxo clusters of a few Cu atoms. The Cu was present under ambient conditions as a mixture of â¼15% Cu+ and â¼85% Cu2+. The oxidation of methane on Cu-NU-1000 was accompanied by the reduction of 9% of the Cu in the catalyst from Cu2+ to Cu+. The products, methanol, dimethyl ether, and CO2, were desorbed with the passage of 10% water/He at 135 °C, giving a carbon selectivity for methane to methanol of 45-60%. Cu oxo clusters stabilized in NU-1000 provide an active, first generation MOF-based, selective methane oxidation catalyst.
RESUMEN
Zr-based metal-organic frameworks (MOFs) are promising supports for copper-based catalysts able to activate methane. Homo- and heterobimetal-functionalized NU-1000 MOF nodes were selected to computationally screen the effect of ancillary metals for C-H bond activation, allowing us to correlate activation free energies with chemical descriptors.
RESUMEN
Noninnocent (redox-active) ligands are increasingly exploited in the design of coordination compounds of earth-abundant transition metals having interesting reactive and catalytic activities. Particular examples of such ligands include those in the pyridine(diimine) (also referred to as bis(imino)pyridine) family. The electronic structures of these compounds are characterized by significant complexity, such that routine single-reference methodologies, for example, Kohn-Sham density functional theory, may be challenged to describe them physically, that is, with quantitatively accurate descriptions of geometries, charge distributions, and spin-state energy separations. We report here RASSCF/RASPT2 calculations on iron pyridine(diimine) complexes over three formal oxidation states that illustrate the highly multiconfigurational characters of these compounds in general and that also offer insights into their electronic ground states and charge distributions.
RESUMEN
Molybdenum(VI) oxide was deposited on the Zr6 node of the mesoporous metal-organic framework NU-1000 via condensed-phase deposition where the MOF is simply submerged in the precursor solution, a process named solvothermal deposition in MOFs (SIM). Exposure to oxygen leads to a monodisperse, porous heterogeneous catalyst, named Mo-SIM, and its structure on the node was elucidated both computationally and spectroscopically. The catalytic activity of Mo-SIM was tested for the epoxidation of cyclohexene. Near-quantitative yields of cyclohexene oxide and the ring-opened 1,2-cyclohexanediol were observed, indicating activity significantly higher than that of molybdenum(VI) oxide powder and comparable to that of a zirconia-supported analogue (Mo-ZrO2) prepared in a similar fashion. Despite the well-known leaching problem of supported molybdenum catalysts (i.e., loss of Mo species thus causes deactivation), Mo-SIM demonstrated no loss in the metal loading before and after catalysis, and no molybdenum was detected in the reaction mixture. In contrast, Mo-ZrO2 led to significant leaching and close to 80 wt % loss of the active species. The stability of Mo-SIM was further confirmed computationally, with density functional theory calculations indicating that the dissociation of the molybdenum(VI) species from the node of NU-1000 is endergonic, corroborating the experimental data for the Mo-SIM material.
RESUMEN
The synthesis and structural characterization of allenyl titanocene(IV) [TiClCp2 (CH=C=CH2 )] 3 and propargyl titanocene(IV) [TiClCp2 (CH2 -C≡C-(CH2 )4 CH3 )] 9 have been described for the first time. Advanced NMR methods including diffusion NMR methods (diffusion pulsed field gradient stimulated spin echo (PFG-STE) and DOSY) have been applied and established that these organometallics are monomers in THF solution with hydrodynamic radii (from the Stokes-Einstein equation) of 3.5 and 4.1â Å for 3 and 9, respectively. Full (1) H, (13) C, Δ(1) H, and Δ(13) Câ NMR data are given, and through the analysis of the Ramsey equation, the first electronic insights into these derivatives are provided. In solution, they are involved in their respective metallotropic allenyl-propargyl equilibria that, after quenching experiments with aromatic and aliphatic aldehydes, ketones, and protonating agents, always give the propargyl products P (when carbonyls are employed), or allenyl products A (when a proton source is added) as the major isomers. In all the cases assayed, the ratio of products suggests that the metallotropic equilibrium should be faster than the reactions of 3 and 9 with electrophiles. Indeed, DFT calculations predict lower Gibbs energy barriers for the metallotropic equilibrium, thus confirming dynamic kinetic resolution.
RESUMEN
A smooth catalytic method to use phenols as the nucleophilic partner in the Nicholas reaction has been developed. The method uses either Ag(I) or Au(I) catalysts with AgClO4 or AgBF4 as the most efficient catalysts tested. Neither additional additives nor cocatalysts were required and the formation of the corresponding phenol adducts occurred in excellent yields. The process has the single limitation of the inability of less nucleophilic phenols (4-nitrophenol) to generate the corresponding adducts. Additionally, the reaction is highly diastereoselective. DFT calculations allow a catalytic cycle to be proposed that involves trimetallic intermediates; the rate-determining step of the reaction is hydroxy-group elimination in a cobalt-silver trimetallic intermediate.
RESUMEN
All elementary steps in the mechanism of Pd-catalyzed decarbonylation of hydrocinnamic acid through formation of a mixed anhydride species have been characterized through electronic structure calculations. Oxidative addition of the mixed anhydride to a singly or doubly ligated Pd is followed by decarbonylation, alkene formation, and catalyst regeneration. Metal-assisted deprotonation of the alkyl-Pd species by a coordinated carboxylate is predicted to be the rate-determining step; theory suggests that bulkier phosphine ligands (e.g., P(o-Tol)3) reduce the free energy of activation substantially, while variation of the auxiliary anhydride has little influence on efficiency.
Asunto(s)
Anhídridos/química , Paladio/química , Fenilpropionatos/química , Estireno/síntesis química , Catálisis , Transferencia de Energía , Cinética , Ligandos , Modelos Químicos , Oxidación-Reducción , Fosfinas/química , Teoría CuánticaRESUMEN
The oxidative coupling of primary amines with internal alkynes catalyzed by Ru complexes is presented as a general atom-economy methodology with a broad scope of applications in the synthesis of N-heterocycles. Reactions proceed through regioselective C-H bond activation in 15 minutes under microwave irradiation or in 24 hours with conventional heating. The synthesis of 2,3,5-substituted pyridines, benzo[h]isoquinolines, benzo[g]isoquinolines, 8,9-dihydro-benzo[de]quinoline, 5,6,7,8-tetrahydroisoquinolines, pyrido[3,4g]isoquinolines, and pyrido[4,3g]isoquinolines is achievable depending on the starting primary amine used. DFT calculations on a benzylamine substrate support a reaction mechanism that consists of acetate-assisted C-H bond activation, migratory-insertion, and C-N bond formation steps that involve 28-30 kcal mol(-1) . The computational study is extended to additional substrates, namely, 1-naphthylmethyl-, 2-methylallyl-, and 2-thiophenemethylamines.
RESUMEN
The mechanism of OsH6(PiPr3)2-mediated fragmentation of a 4-(2 pyridyl)-2-azetidinone has been investigated by DFT calculations. The addition of the C4-H bond of the substrate to OsH2(PiPr3)2 allows the active participation of an osmium lone pair in the B-type ß-lactam fragmentation process. This new mechanism makes the N1-C4/C2-C3 fragmentation of the lactamic core thermally accessible through a stepwise process.
RESUMEN
The reactivity toward H2 of coordinatively unsaturated Pt(II) complexes, stabilized by N-heterocyclic carbene (NHC) ligands, is herein analyzed. The cationic platinum complexes [Pt(NHC')(NHC)](+) (where NHC' stands for a cyclometalated NHC ligand) react very fast with H2 at room temperature, leading to hydrogenolysis of the Pt-CH2 bond and concomitant formation of hydride derivatives [PtH(NHC)2](+) or hydrido-dihydrogen complexes [PtH(H2)(NHC)2](+). The latter species release H2 when these compounds are subjected to vacuum. The X-ray structure of complex [PtH(IPr)2][SbF6] revealed its unsaturated nature, exhibiting a true T-shaped structure without stabilization by agostic interactions. Density functional theory calculations indicate that the binding and reaction of H2 in complexes [PtH(H2)(NHC)2](+) is more favored for derivatives bearing aryl-substituted NHCs (IPr, 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene and IMes = 1,3-dimesityl-1,3-dihydro-2H-imidazol-2-ylidene) than for those containing tert-butyl groups (I(t)Bu). This outcome is related to the higher close-range steric effects of the I(t)Bu ligands. Accordingly, H/D exchange reactions between hydrides [PtH(NHC)2](+) and D2 take place considerably faster for IPr and IMes* derivatives than for I(t)Bu ones. The reaction mechanisms for both H2 addition and H/D exchange processes depend on the nature of the NHC ligand, operating through oxidative addition transition states in the case of IPr and IMes* or by a σ-complex assisted-metathesis mechanism in the case of I(t)Bu.
RESUMEN
Hydrogen atoms in the coordination sphere of a transition metal are highly mobile ligands. Here, a new type of dynamic process involving hydrides has been characterized by computational means. This dynamic event consists of an orbital-like motion of hydride ligands around low-coordinate metal centers containing N-heterocyclic carbenes. The hydride movement around the carbene-metal-carbene axis is the lowest energy mode connecting energy equivalent isomers. This understanding provides crucial information for the interpretation of NMR spectra.
RESUMEN
Zr-based metal-organic frameworks (MOFs) are excellent heterogeneous porous catalysts due to their thermal stability. Their tunability via node and linker modifications makes them amenable for theoretical studies on catalyst design. However, detailed benchmarks on MOF-based reaction mechanisms combined with kinetics analysis are still scarce. Thus, we here evaluate different computational models and density functional theory (DFT) methods followed by kinetic Monte Carlo studies for a case reaction relevant in biomass upgrading, i.e., the conversion of methyl levulinate to γ-valerolactone catalyzed by UiO-66. We show the impact of cluster versus periodic models, the importance of the DF of choice, and the direct comparison to experimental data via simulated kinetics data. Overall, we found that Perdew-Burke-Ernzerhof (PBE), a widely employed method in plane-wave periodic calculations, greatly overestimates reaction rates, while M06 with cluster models better fits the available experimental data and is recommended whenever possible.