Inverse Hypercorroles.

Ground-state and time-dependent density functional theory (TDDFT) calculations with the long-range-corrected, Coulomb-attenuating CAMY-B3LYP exchange-correlation functional and large, all-electron STO-TZ2P basis sets have been used to examine the potential "inverse hypercorrole" character of meso-p-nitrophenyl-appended dicyanidocobalt(III) corrole dianions. The effect is most dramatic for 5,15-bis(p-nitrophenyl) derivatives, where it manifests itself in intense NIR absorptions. The 10-aryl groups in these complexes play a modulatory role, as evinced by experimental UV-visible spectroscopic and electrochemical data for a series of 5,15-bis(p-nitrophenyl) dicyanidocobalt(III) corroles. TDDFT (CAMY-B3LYP) calculations ascribe these features clearly to a transition from the corrole's a2u-like HOMO (retaining the D4h irrep used for metalloporphyrins) to a nitrophenyl-based LUMO. The outward nature of this transition contrasts with the usual phenyl-to-macrocycle direction of charge transfer transitions in many hyperporphyrins and hypercorroles; thus, the complexes studied are aptly described as inverse hypercorroles.

Synthesis, Spectral, Redox, and Sensing Studies of ß-Dicyanovinyl-Appended Corroles and Their Metal Complexes.

A new family of ß-dicyanovinyl (DCV)-appended corroles represented as MTPC(MN) (where M = 3H, Cu, Ag, and Co(PPh3) and MN = malononitrile and TPC = 5,10,15-triphenylcorrole) were synthesized starting from the free base mono ß-formyl corrole, H3TPC(CHO), and characterized along with their respective MTPC(CHO) and MTPC complexes as to their spectroscopic and electrochemical properties in nonaqueous media. Comparisons between the two series of corroles demonstrate a pronounced substituent effect of the ß-DCV group on the physicochemical properties making the MTPC(MN) derivatives substantially easier to reduce and more difficult to oxidize than the formyl or unsubstituted corroles. In addition, the colorimetric and spectral detection of 11 different anions (X) in the form of tetrabutylammonium salts (TBAX, X = PF6-, OAc-, H2PO4-, CN-, HSO4-, NO3-, ClO4-, F-, Cl-, Br-, and I-) were also investigated in nonaqueous media. Of the investigated anions, only CN- was found to induce changes in the UV-vis and 1H NMR spectra of the ß-DCV metallocorroles. This data revealed that CuTPC(MN) and AgTPC(MN) act as chemodosimeters for selective cyanide ion detection via a nucleophilic attack at the vinylic carbon of the DCV substituent, while (PPh3)CoTPC(MN) acts as a chemosensor for cyanide ion sensing via axial coordination to the cobalt metal center. A low-limit detection of cyanide ions was observed at 1.69 ppm for CuTPC(MN) and 1.17 ppm for AgTPC(MN) in toluene.

Altering the Site of Electron Abstraction in Cobalt Corroles via meso-Trifluoromethyl Substituents.

A mono-DMSO cobalt meso-CF3 corrole, formulated as (CF3)3CorCo(DMSO), where (CF3)3Cor is the trianion of 5,10,15-tris(trifluoromethyl)corrole, was synthesized and characterized as to its spectral and electrochemical properties in nonaqueous media with a focus on its coordination chemistry and electronic structure. Cyclic voltammetric measurements showed more facile reductions and difficult oxidations compared to the cobalt triarylcorrole possessing p-CF3Ph units at the meso-positions, a result consistent with the enhanced inductive effect of the electron-withdrawing trifluoromethyl substituents linked directly at the meso-carbon atoms of the macrocycle. The effects of DMSO, pyridine, and cyanide anions (CN-) on the electrochemistry and spectral properties of the compound were investigated, and it was found that only two molar equivalents are needed to form the bis-CN adduct, which exhibited two 1-electron oxidations at 0.27 and 0.95 V vs saturated calomel electrode (SCE) in CH2Cl2/0.1 M TBAP. The sites of electron transfer in the first oxidation and reduction were investigated by spectroelectrochemistry and confirmed that the first electron addition affords a Cor3-CoII complex under all solution conditions independent of the initial coordination and/or electronic configuration (i.e., innocent Cor3-CoIII or noninnocent Cor•2-CoII). In contrast, data for the first oxidation suggests that the site of electron abstraction (ligand or metal) depended upon coordination of the neutral and in situ generated complexes under the various solution conditions, leading to a Co(IV)-corrole3- product for both the bis-pyridine and bis-cyanide adducts.

Hypercorroles Formed via the Tail that Wagged the Dog: Charge Transfer Interactions from Innocent Corroles to Meso-Nitrophenyl Substituents.

A series of cobalt nitrophenylcorroles were spectrally characterized in CH2Cl2, and under certain solution conditions, several compounds were shown to exhibit hypercorrole spectra resulting from charge transfer interactions from the corrole π-system to the redox-active meso-NO2Ph substituents. The resulting spectral pattern has not previously been reported for metallocorroles and in the case of the cobalt derivatives was shown to depend upon the number and position of the meso-nitrophenyl groups on the macrocycle, the position of the NO2 substituent on the meso-phenyl ring(s) (para or meta), and the electronic structure of the corrole, which can exist in its innocent or noninnocent form depending in large part upon the type and number of axial ligands. Cobalt corroles bearing p-nitrophenyl groups at the 5,15- or 5,10,15-positions of the macrocycle exhibited the most marked hypercorrole spectra under solution conditions where the complex was innocent (i.e., Cor3-CoIII), and a systematic analysis of the spectral data suggests the root of this perturbation to be a corrole-to-aryl interaction (i.e., ligand-to-ligand charge transfer or LLCT). The largest interaction between the π-system and the NO2Ph substituents was seen upon coordination of anionic cyanide (CN-) axial ligands to the Co(III) center of the bis-(CN-)-5,15-dinitrophenyl derivative, resulting in a cobalt hypercorrole spectrum where the broad Q-band was red-shifted even further into the NIR region and located at 795 nm in CH2Cl2 and 827 nm in pyridine. Cyclic voltammetry of the bis-CN- adducts showed that the first electrons are added to the LUMOs of the p-NO2Ph substituents rather than the corrole, while the same orbitals for the mono-CN- adducts are nearly degenerate. This redox behavior contrasts with what is seen for the noninnocent nitrophenyl corroles having "normal" unperturbed UV-vis spectra where the first reduction involves the π-system of the macrocycle, followed by reduction of the p-NO2Ph groups at more negative potentials.

Synthesis, Characterization, and Electrochemistry of Copper Dibenzoporphyrin(2.1.2.1) Complexes.

Three copper dibenzoporphyrin(2.1.2.1) complexes having two dipyrromethene units connected through o-phenylen bridges and 4-MePh, Ph, or F5Ph substituents at the meso positions of the dipyrrins were synthesized and characterized according to their spectral, electrochemical, and structural properties. As indicated by the single-crystal X-ray structures, all three derivatives have highly bent molecular structures, with angles between each planar dipyrrin unit ranging from 89° to 85°, indicative of a nonaromatic molecule. The insertion of copper(II) into dibenzoporphyrins(2.1.2.1) induced a change in the macrocyclic cavity shape from rectangular in the case of the free-base precursors to approximately square for the metalated copper derivatives. Solution electron paramagnetic resonance (EPR) spectra at 100 K showed hyperfine coupling of the Cu(II) central metal ion and the N nucleus in the highly bent molecular structures. Electrochemical measurements in CH2Cl2 or N,N-dimethylformamide (DMF) containing 0.1 M tetrabutylammonium perchlorate (TBAP) were consistent with ring-centered electron transfers and, in the case of reduction, were assigned to electron additions involving two equivalent π centers on the bent nonaromatic molecule. The potential separation between the two reversible one-electron reductions ranged from 230 to 400 mV in DMF, indicating a moderate-to-strong interaction between the equivalent redox-active dipyrrin units of the dibenzoporphyrins(2.1.2.1). The experimentally measured highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps ranged from 2.14 to 2.04 eV and were smaller than those seen for the planar copper tetraarylporphyrins(1.1.1.1), (Ar)4PCu.

The Difficult Marriage of Triarylcorroles with Zinc and Nickel Ions.

The coordination chemistry of corrole has witnessed a great improvement in the past few years and its Periodic Table has been widened to be so large that it is compared with that of porphyrins. However, Ni and Zn ions, commonly used with porphyrins for both synthetic and theoretical purposes, are sparsely reported in the case of corroles. Here, we report synthetic protocols for preparing Ni and Zn triarylcorrole complexes. In the case of Zn, the preliminary oxidation of the free base corrole in DMSO to the neutral corrole radical is a necessary step to obtain the coordination of the metal ion, because the direct reaction led to the formation of an open-chain tetrapyrrole. The Ni complex could be directly obtained by heating the free base corrole and Ni(II) salt to 100 °C in a DMSO solution containing FeCl3. The non-innocent nature of the corrole ligand for both complexes has been elucidated by EPR, and in the case of the Zn derivative the first spectroelectrochemical characterization is presented.

Application of Lever's EL Parameter Scale toward Fe(II)/Fe(III) versus Pc(2-)/Pc(1-) Oxidation Process Crossover Point in Axially Coordinated Iron(II) Phthalocyanine Complexes.

The electronic structures and, particularly, the nature of the HOMO in a series of PcFeL2, PcFeL'L″, and [PcFeX2]2- complexes (Pc = phthalocyaninato(2-) ligand; L = NH3, n-BuNH2, imidazole (Im), pyridine (Py), PMe3, PBu3, t-BuNC, P(OBu)3, and DMSO; L' = CO; L″ = NH3 or n-BuNH2; X = NCO-, NCS-, CN-, imidazolate (Im-), or 1,2,4-triazolate(Tz-)) were probed by electrochemical, spectroelectrochemical, and chemical oxidation as well as theoretical (density functional theory, DFT) studies. In general, energies of the metal-centered occupied orbitals in various six-coordinate iron phthalocyanine complexes correlate well with Lever Electrochemical Parameter EL and intercross the phthalocyanine-centered a1u orbital in several compounds with moderate-to-strong π-accepting axial ligands. In these cases, an oxidation of the phthalocyanine macrocycle (Pc(2-)/Pc(1-)) rather than the central metal ion (Fe(II)/Fe(III)) was theoretically predicted and experimentally confirmed.

Facile Heterogeneous and Homogeneous Anion Induced Electrosynthesis: An Efficient Method for Obtaining π-Extended Porphyrins.

Two closely related electrosynthetic approaches are applied for the preparation of novel π-extended tetraphenylporphyrins from malononitrile-appended meso-ß di-fused porphyrins, represented as MTPP(MN)2, where TPP = the dianion of tetraphenylporphyrin and MN = malononitrile. The first method involves application of a controlled reducing potential at a platinum electrode in CH2Cl2, while the second proceeds via cyanide anion induced electron transfer. Both methods produced the same decyanated, π-extended di-fused porphyrins represented as MTPP(VCN)2 where VCN = vinyl cyanide and M = H2, NiII, CuII, or ZnII in almost quantitative yields. The final isolated and purified porphyrin products are characterized by a split Soret band ranging from 411-497 nm and two broad intense Q bands. The new π-extended porphyrins are easier to reduce than the parent MTPP or MTPP(MN)2 compounds by 760-800 mV and 180-190 mV, respectively, and possess an electrochemical HOMO-LUMO gap ranging from 1.48 to 1.66 V. They are also characterized by two reversible one-electron ring-centered reductions in CH2Cl2 and three reversible one-electron ring-centered reductions in THF. A fourth irreversible reduction is seen in THF at more negative potentials and is assigned to one or two of the fused cyanobenzene rings of the macrocycle.

Synthesis, Structural and Physicochemical Properties of Water-Soluble Mixed-Ligand Diruthenium Complexes Containing Anilinopyridinate Bridging Ligands.

A series of water-soluble Ru25+ complexes of the type Ru2(O2CCH3)3(L)Cl where L = 2,3,4,5,6-F5ap, 2,4,6-F3ap, 2-Fap, ap, 2-Meap, 2,6-Me2ap, or 2,4,6-Me3ap, where ap is the anilinopyridinate anion, have been characterized as to their structural and physicochemical properties in H2O and DMSO. Five of the newly synthesized complexes were structurally characterized, and the Ru-Cl bond lengths range from 2.477 to 2.544 Å while the Ru-Ru bond lengths range from 2.2838 to 2.2935 Å. The UV-vis spectra of each compound are characterized by three absorption bands in both H2O and DMSO, the intensity and position of which vary with both the type of bridging ligand and the solvent. The seven examined Ru25+ complexes exist as 1:1 electrolytes in water, and each undergoes a reversible one-electron reduction assigned to Ru25+/Ru24+ in both investigated solvents. A second irreversible reduction attributed to Ru24+/Ru23+ is also observed for each compound at more negative potentials in DMSO. A linear free energy relationship exists between the sum of the Hammett substituent constants (Σσ) on the ap-type bridging ligand and the wavenumber of an absorption band for the Ru25+ complexes. A linear relationship is also seen between Σσ and measured E1/2 values for the Ru25+/Ru24+ process in water containing 0.1 M KCl, but little to no effect is seen between the specific bridging ligand and the structural features of the investigated compounds.

Solvent and Anion Effects on the Electrochemistry of Manganese Dipyrrin-Bisphenols.

A series of "N2O2-type" manganese dipyrrin-bisphenols (DPP), formulated as (Ar)DPPMn, where Ar = pentafluorophenyl (F5Ph), phenyl (Ph), or mesityl (Mes), were electrochemically and spectroscopically characterized in nonaqueous media with and without added anions in the form of tetrabutylammonium salts (TBAX where X = ClO4-, PF6-, BF4-, F-, Cl-, OH-, or CN-). Two major one-electron reductions are observed under most solution conditions, the first of which is assigned as a MnIII/II process and the second as electron addition to the π-ring system as confirmed by spectroelectrochemistry. Each MnIII complex also exhibits one or two one-electron oxidations, the exact number depending upon the positive potential limit of the electrochemical solvent. The two oxidations are separated by 580-590 mV in CH3CN containing 0.1 M TBAPF6 and are assigned as π-ring-centered electron transfers to stepwise form a (Ar)DPPMnIII π-cation radical and dication under these solution conditions. Comparisons are made between redox properties of (Ar)DPPMn and manganese(III) porphyrins, corroles, and corrolazines each of which contains an innocent trianionic complexing ligand. The redox behavior and spectroscopic properties of [(Ar)DPPMn]n where n = 0, -1, or +1 are also compared to that of other structurally related [(Ar)DPPM]n complexes under similar solution conditions where M = CoII, CuII, BIII, or AuIII.

Structural, Photophysical, and Electrochemical Properties of Doubly Fused Porphyrins and Related Fused Chlorins.

The electrochemical and physicochemical properties of tetraphenylporphyrins and tetraphenylchlorins with two fused indanedione (IND) or malononitrile (MN) groups and two antipodal Br, Ph, or H ß-substituents are investigated in nonaqueous media. These compounds were synthesized by oxidative fusion of free-base trans-chlorins, followed by metalation. The corresponding free-base di-fused chlorins were also isolated as intermediates and characterized for comparisons. The examined di-fused porphyrins (DFP) and di-fused chlorins (DFC) are represented as MDFP(Y)2(R)2 and H2DFC(Y)2(R)2, where M = 2H, CuII, NiII, ZnII, and CoII, Y is a fused indanedione (IND) or malononitrile group (MN), and R = H, Br, or Ph. The IND- and MN-appended compounds in both series exhibit the expected two one-electron oxidations but quite different redox behavior is observed upon reduction, where the free-base IND-appended chlorins show four reversible one-electron reductions, compared to only two for the related free-base MN-appended chlorins. Although porphyrin trianions and tetraanions have been recently described for derivatives with highly electron-withdrawing and/or π-extending substituents, this seems not to be the case for the doubly fused IND-chlorins, where the first two one-electron additions are proposed to be located at the conjugated macrocycle and the last two at the fused IND groups, each of which is reduced at a different potential, consistent with the behavior expected for two equivalent and interacting redox centers. Unlike the examined chlorins, which are all stable in their electroreduced forms, the electrogenerated anionic forms of the di-fused porphyrins are all highly reactive and characterized by cyclic voltammograms having reduction peaks not only for the synthesized compounds added to solution but also for one or more new redox active species formed at the electrode surface in homogeneous chemical reactions following electron transfer. Comparisons are made between electrochemical behavior of the structurally related porphyrins and chlorins and the sites of electron transfer assigned on the basis of known electrochemical diagnostic criteria. One of the compounds, ZnDFP(MN)2, was also structurally characterized as having a ruffled and twisted macrocyclic conformation.

Old Dog, New Tricks: Innocent, Five-coordinate Cyanocobalt Corroles.

Three mono-CN ligated anionic cobalt A3-triarylcorroles were synthesized and investigated as to their spectroscopic and electrochemical properties in CH2Cl2, pyridine (Py), and dimethyl sulfoxide (DMSO). The newly synthesized corroles provide the first examples of air-stable cobalt corroles with an anionic axial ligand and are represented as [(Ar)3CorCoIII(CN)]-TBA+, where Cor is the trivalent corrole macrocycle, Ar is p-(CN)Ph, p-(CF3)Ph, or p-(OMe)Ph, and TBA+ is the tetra-n-butylammonium (TBA) cation. Multiple redox reactions are observed for each mono-CN derivative with a key feature being a more facile first oxidation and a more difficult first reduction in all three solvents as compared to all previously examined corroles with similar meso- and ß-pyrrole substituents. Formation constants (log K) for conversion of the five-coordinate mono-CN complex to its six-coordinate bis-CN form ranged from 102.8 for Ar = p-(OMe)Ph to 104.7 for Ar = p-(CN)Ph in DMSO as determined by spectroscopic methodologies. The in situ generated bis-CN complexes, represented as [(Ar)3CorCoIII(CN)2]2-(TBA+)2, and the mixed ligand complexes, represented as [(Ar)3CorCoIII(CN)(Py)]-TBA+, were also investigated as to their electrochemical and spectroscopic properties. UV-visible spectra and electrode reactions of the synthesized mono-CN derivatives are compared with the neutral mono-DMSO cobalt corrole complexes and the in situ generated bis-CN and bis-Py complexes, and the noninnocent (or innocent) nature of each cobalt corrole system is addressed. The data demonstrate the ability of the CN- axial ligand(s) to stabilize the high-valent forms of the metallocorrole, leading to systems with innocent macrocyclic ligands. Although a number of six-coordinate cobalt(III) corroles with N-donor ligands were characterized in the solid state, a dissociation of one axial ligand readily occurs in nonaqueous solvents, and this behavior contrasts with the high stability of the currently studied bis-CN adducts in CH2Cl2, pyridine, or DMSO. Linear free energy relationships were elucidated between the meso-phenyl Hammett substituent constants (Σσ) and the measured binding constants, the redox potentials, and the energy of the band positions in the mono-CN and bis-CN complexes in their neutral or singly oxidized forms, revealing highly predictable trends in the physicochemical properties of the anionic corroles.

Synthesis and the Effect of Anions on the Spectroscopy and Electrochemistry of Mono(dimethyl sulfoxide)-Ligated Cobalt Corroles.

A new series of cobalt A3-triarylcorroles were synthesized and the compounds examined as to their electrochemical and spectroscopic properties in CH2Cl2 or dimethyl sulfoxide (DMSO) containing 10 different anions added to the solution in the form of tetrabutylammonium salts. The investigated anions were PF6-, BF4-, HSO4-, ClO4-, Br-, I-, Cl-, OAc-, F-, OTs-, and CN-, all but three of which were found to facilitate reduction of the cobalt corrole in dilute CH2Cl2 solutions, as determined by a combination of UV-vis spectroscopy and spectroelectrochemistry. The synthesized corroles are represented as (Ar)3CorCo(DMSO), where Ar is a meso-phenyl group containing one of 10 different electron-donating or -withdrawing substituents. The axial DMSO ligand was found to dissociate in dilute (10-5 M) CH2Cl2 solutions, but this was not the case at the higher electrochemical concentration of 10-3 M, where the investigated corroles exhibit a rich redox reactivity, undergoing up to five reversible one-electron-transfer reactions under the different solution conditions. The reversible half-wave potentials for generation of the singly oxidized corroles varied by over 1.0 V with a change in the electron-donating or -withdrawing meso-phenyl substituents and type of anion added to the solution, ranging from E1/2 = 0.83 V in one extreme to -0.42 V in the other. Much smaller shifts in the potentials (on the order of ∼210 mV) were observed for the reversible first reduction as a function of changes of the anion and/or corrole substituents, with the only exception being in the case of CN-, where the E1/2 values in CH2Cl2 ranged from +0.08 V in solutions containing 0.1 M TBAClO4 to >-1.8 V upon the addition of CN-.

Electrochemistry of Bis(pyridine)cobalt (Nitrophenyl)corroles in Nonaqueous Media.

A series of bis(pyridine)cobalt corroles with one or three nitrophenyl groups on the meso positions of the corrole macrocycle were synthesized and characterized as to their electrochemical and spectroscopic properties in dichloromethane, benzonitrile, and pyridine. The potentials for each electrode reaction were measured by cyclic voltammetry and the electron-transfer mechanisms evaluated by analysis of the electrochemical data combined with UV-visible spectra of the neutral, electroreduced, and electroxidized forms of the corroles. The proposed electronic configurations of the initial compounds and the prevailing redox reactions involving the electroactive central cobalt ion, the electroactive conjugated macrocycle, and the electroactive meso-nitrophenyl groups are all discussed in terms of solvent binding and the number of the nitrophenyl groups and other substituents on the meso-nitrophenyl rings of the compounds.

An emissive charge-transfer excited-state at the well-defined hetero-nanostructure interface of an organic conjugated molecule and two-dimensional inorganic nanosheet.

Precise engineering of excited-state interactions between an organic conjugated molecule and a two-dimensional semiconducting inorganic nanosheet, specifically the manipulation of charge-transfer excited (CTE) states, still remains a challenge for state-of-the-art photochemistry. Herein, we report a long-lived, highly emissive CTE state at structurally well-defined hetero-nanostructure interfaces of photoactive pyrene and two-dimensional MoS2 nanosheets via an N-benzylsuccinimide bridge (Py-Bn-MoS2). Spectroscopic measurements reveal that no charge-transfer state is formed in the ground state, but the locally-excited (LE) state of pyrene in Py-Bn-MoS2 efficiently generates an unusual emissive CTE state. Theoretical studies elucidate the interaction of MoS2 vacant orbitals with the pyrene LE state to form a CTE state that shows a distinct solvent dependence of the emission energy. This is the first example of organic-inorganic 2D hetero-nanostructures displaying mixed luminescence properties by an accurate design of the bridge structure, and therefore represents an important step in their applications for energy conversion and optoelectronic devices and sensors.

Cobalt tris(4-vinylphenyl)corrole: out of the frying pan into the polymer.

A novel cobalt corrole bearing 4-vinylphenyl groups at the 5,10,15-meso-positions of the macrocycle has been synthesized from tris(4-bromophenyl)corrole using a Suzuki coupling reaction. The spectral and electrochemical properties are reported in CH2Cl2 along with its ability to form a highly stable six-coordinate complex and cross-linked corrole-based polymer in a 59% yield.

Nickel(II) monobenzoporphyrins and chlorins: synthesis, electrochemistry and anion sensing properties.

A series of nickel(II) monobenzochlorins (MBCs) and monobenzoporphyrins (MBPs) containing ß-appended or meso,ß-fused indanedione (IND) or malononitrile (MN) groups were synthesized and characterized for their physicochemical, electrochemical and anion sensing properties. Each investigated compound contained four meso-phenyl rings and a single ß,ß'-fused 4,5-di(methoxycarbonyl)benzene ring, with the chlorins represented as NiMBC(Y)2(R)4 and the porphyrins as NiMBP(YF)2, where Y is an indanedione (IND) or malononitrile (MN) group, R = H or Br and YF is a meso,ß-fused IND or MN substituent. One of the investigated compounds, NiMBP(IND)2, was structurally characterized and shown to possess a ruffled macrocyclic conformation. The monobenzochlorins, NiMBC(IND)2, NiMBC(IND)2Br4 and NiMBC(MN)2, reversibly respond to basic anions such as CN-, F-, OAc- and H2PO4- through a visible color change assigned to the deprotonation of the vicinal proton on the appended IND or MN substituents. The malononitrile-fused NiII monobenzoporphyrin, NiMBP(MN)2, exhibited a selective but irreversible visual detection of cyanide ions (LOD = 2.23 ppm). This reaction afforded a tri-fused π-extended monobenzoporphyrin product represented as NiMBP(VCN)2 (where VCN = meso,ß-fused vinyl cyanide) in non-aqueous media and proceeded via anion induced electron transfer (AIET). The in situ generated π-extended porphyrin was also isolated and characterized as to its physicochemical and electrochemical properties and found to possess a narrow electrochemical HOMO-LUMO gap of 1.46 V along with a near-IR (NIR) absorption band located at 861 nm.