Bicycle handlebar hernia with multiple enterotomies: a case report.

BACKGROUND: Bicycle handlebar hernias are uncommon form of traumatic abdominal wall hernias (TAWH) resulting from a direct blunt trauma to the anterior abdominal wall. CASE PRESENTATION: This report describes a 14 year-old boy with no history of previous abdominal hernia, presented in the emergency department with an isolated, tender lump in his right iliac fossa after falling off his bicycle. Contrast Enhanced Computer Tomography (CE-CT) showed intestinal loops protruding through the abdominal wall defect with free air in peritoneum suggesting hollow viscus perforation. He underwent emergency laparotomy through transverse skin incision, which showed mid jejunum mesentery tear and multiple enterotomies. A wedge small bowel resection of enterotomies with primary closure, repair of mesenteric tear followed by a primary repair of the abdominal wall hernia was performed. The patient made an uneventful post-operative recovery. CONCLUSION: Bicycle handlebar Hernia (BHH) is a type of traumatic abdominal wall hernia caused by a low impact energy direct blunt injury. We describe a case of BHH associated with small bowel injury which was treated with exploratory laparotomy through skin crease traverse incision. This surgical approach allowed an appropriate exploration of all the intrabdominal structures and primary repair of the hernial defect.

Photothermal effects of laser tissue soldering.

Low-strength anastomoses and thermal damage of tissue are major concerns in laser tissue welding techniques where laser energy is used to induce thermal changes in the molecular structure of the tissues being joined, hence allowing them to bond together. Laser tissue soldering, on the other hand, is a bonding technique in which a protein solder is applied to the tissue surfaces to be joined, and laser energy is used to bond the solder to the tissue surfaces. The addition of protein solders to augment tissue repair procedures significantly reduces the problems of low strength and thermal damage associated with laser tissue welding techniques. Investigations were conducted to determine optimal solder and laser parameters for tissue repair in terms of tensile strength, temperature rise and damage and the microscopic nature of the bonds formed. An in vitro study was performed using an 808 nm diode laser in conjunction with indocyanine green (ICG)-doped albumin protein solders to repair bovine aorta specimens. Liquid and solid protein solders prepared from 25% and 60% bovine serum albumin (BSA), respectively, were compared. The efficacy of temperature feedback control in enhancing the soldering process was also investigated. Increasing the BSA concentration from 25% to 60% greatly increased the tensile strength of the repairs. A reduction in dye concentration from 2.5 mg ml(-1) to 0.25 mg ml(-1) was also found to result in an increase in tensile strength. Increasing the laser irradiance and thus surface temperature resulted in an increased severity of histological injury. Thermal denaturation of tissue collagen and necrosis of the intimal layer smooth muscle cells increased laterally and in depth with higher temperatures. The strongest repairs were produced with an irradiance of 6.4 W cm(-2) using a solid protein solder composed of 60% BSA and 0.25 mg ml(-1) ICG. Using this combination of laser and solder parameters, surface temperatures were observed to reach 85+/-5 degrees C with a maximum temperature difference through the 150 microm thick solder strips of about 15 degrees C. Histological examination of the repairs formed using these parameters showed negligible evidence of collateral thermal damage to the underlying tissue. Scanning electron microscopy suggested albumin intertwining within the tissue collagen matrix and subsequent fusion with the collagen as the mechanism for laser tissue soldering. The laser tissue soldering technique is shown to be an effective method for producing repairs with improved tensile strength and minimal collateral thermal damage over conventional laser tissue welding techniques.

Experimental limb transplantation, part I: identification of an effective tapered triple combination immunosuppressive regime.

Limb transplantation was performed across the Brown Norway to Fischer 344 histocompatibility barrier in rats to evaluate the effects of triple combination immunosuppressive therapeutic regimens. Sixty rats were divided into five groups: group I (F344 to F344) isograft controls group II (BN to F344) allograft controls received no immunosuppressive treatment. Groups III and V (BN to F344) received various exposures to tacrolimus (TRL), mycophenolate mofetil (MMF) and prednisolone (Pred) for two weeks: namely, group III: TRL 0.5 mg/kg/d; MMF 10 mg/kg/d; Pred 0.5 mg/kg/d; group IV: TRL 2 mg/kg/d, MMF 15 mg/kg/d, Pred 0.5 mg/kg/d; and group V: TRL 3 mg/kg/d; MMF 20 mg/kg/d; Pred 0.5 mg/kg/d. After 2 weeks, group III and V animals underwent a simultaneous 20% taper of Pred and MMF each further week such that by week 7 the animals were only on TRL. At this time TRL was tapered at the same rate (20% every week) to a maintenance dose of 0.6 mg/kg/d. Evidence of rejection was sought by daily visual observation for swelling, redness, erythema, edema, or skin necrosis. Salvage treatment was used only if rejection occurred after the first 7 weeks, namely, reversing to 100% of the initial TRL dose in that group for 2 weeks with a subsequent taper. Skin and muscle biopsies were obtained from grafted limbs on day 3, 13, 24, 35, and at the endpoint (9 months or uncontrollable rejection). There was no rejection in group I, while all animals showed acute rejection as expected in group II. All group III rats displayed a similar though delayed acute rejection, showing that the regimen was not therapeutic. Rats in group IV displayed the best results, namely, 10 of 12 (83%) with no rejection or side effects at 9 months. Rats in group V displayed numerous, unacceptable side effects due to overtreatment with a 1-month mortality rate of 50%. This study shows that low-dose TRL in combination with MMF and Pred may achieve excellent long-term results of composite tissue transplants. TRL can be used alone as maintenance therapy following an initial loading dose and a tapering period. Rejection is easily reversed by only temporarily increasing the TRL dose.

Experimental limb transplantation, part II: excellent return of function and indefinite survival after withdrawal of immunosuppression.

In this study the three components of an immunosuppressive combination therapy were gradually withdrawn in a rat limb transplantation model to evaluate the effects on long-term survival of the grafted limbs, rejection rate, and functional recovery. The procedure was performed in 16 rats across a strong Brown Norway to Fischer 344 histocompatibility barrier. Eight animals served as a control group that was not given any antirejection therapy and rejected their limb within a few days. The remaining eight animals were administered a 2-week course of immunosuppressive therapy including tacrolimus (TRL; 2 mg/kg/d), mycophenolate mofetil (MMF; 15 mg/kg/d), and prednisolone (Pred; 0.5 mg/kg/d). At 2 weeks, Pred and MMF were simultaneously tapered by 20% of the dosage every week; by week 7 the animals were on TRL only. TRL was then tapered at the same rate (20% every week) to a maintenance dose of 0.6 mg/kg/d at week 12. After 6 months the immunosuppression was stopped. Four of 8 animals did not reject throughout the study up, to the 1-year endpoint. At this stage they show excellent functional outcomes, evaluated by clinical tests and walking tract analysis. The remaining four rats developed a rejection at an average of 267 days postoperatively (range 224 to 302 days), corresponding to an average of 87 days (range 44 to 122 days) without any immunosuppression. They were sacrificed as soon as rejection was confirmed for histological examination of the various tissues. This study showed that a triple combination therapy provides excellent long-term functional outcomes of the transplanted limbs, with no rejection episodes, no side effects, or complications, even 6 months after withdrawal of all immunosuppressive components, suggesting the possible emergence of tolerance.

Human hand transplantation: what have we learned?

Hand transplantation may become an important procedure for upper limb functional restoration. To date, 18 patients have been undergone 24 hand operations in the world. Initial results are extremely promising; the functional results are apparently superior to those obtained with prostheses. We report on the combined French and Italian experience of six patients (eight hands), which is based on a jointly devised protocol and represents the largest available clinical series. Six male patients aged 43, 33, 35, 32, 33, and 22 years received either a single right hand-dominant transplantation (four cases) or a simultaneous double hand transplantation (two cases). The time since the amputation ranged from 3 to 22 years. The level of transplantation was at the wrist in five cases (six hands) and at the distal forearm in two cases (two hands). Cold ischemia averaged 11.5 hours. Three patients simultaneously received additional full-thickness skin taken from the donor and transplanted onto their left hip area. This skin served as a source for biopsies and as an additional area to monitor rejection (distant sentinel skin graft). The immunosuppressive protocol included polyclonal antibodies (three patients) or monoclonal anti-CD 25 antibody (three patients), tacrolimus, mycophenolate mofetil, and prednisolone. No surgical complications occurred. Skin rejection occurred at least once in all patients at a mean of 40 days postoperatively. Three patients recovered protective and some discriminative sensation in their palm and fingers. Two patients are recovering sensation, but are still in the early phases of the regenerative process, due to the short time since the transplantation. One patient was not compliant with the immunosuppressive therapy, and underwent uncontrolled rejection and reamputation.

Sutureless microvascular anastomoses by a biodegradable laser-activated solid protein solder.

A new sutureless technique to successfully anastomose the abdominal aorta of rats (1.3 mm in diameter) by using a fully biodegradable, laser-activated protein solder is presented. A total of 90 rats were divided into two groups randomly. In group one, the anastomoses were performed by using conventional microsuturing technique, whereas in group two, the anastomoses were performed by using a new laser welding technique. In addition, each of the two groups were divided into five subgroups and evaluated at different follow-up periods (10 minutes, 1 hour, 1 day, 1 week, and 6 weeks). At these intervals, the anastomoses were evaluated for patency and tensile strength. Three anastomoses in each subgroup were processed for light and electron microscopy. All anastomoses were found to be patent. The mean clamp time of the anastomoses performed with conventional suturing was 20.6 minutes compared with 7.2 minutes for the laser-activated welded anastomoses (p < 0.001). The strain measurements showed a stronger mechanical bond of the sutured anastomoses in the initial phase. However, at 6 weeks the tensile strength of the laser-welded anastomoses was higher compared with the conventional suture technique. Histologic evaluations revealed a near complete resorption of the solder after 6 weeks. The junction site of the vessel ends cannot be determined on the luminal side of the artery. In conclusion, a resorbable protein used as a solder, activated by a diode laser, can provide a reliable, safe, and rapid arterial anastomosis, which could be performed by any microsurgeon faster than conventional suturing after a short learning curve.

Delayed presentation of intestinal atresia and intussusception--a case report and literature review.

Neonatal intussusception is a rare phenomenon. We report a case where intestinal obstruction became evident after eight days in an infant of 32 weeks gestational age and 0.94 kg birth weight. Laparotomy revealed a type 2 ileal atresia, present as a result of ischaemic injury secondary to intra-uterine intussusception. Resection of the intussuscepted segment was carried out with primary anastomotic repair leading to a good outcome. A period of eight days passed before clinically evident abdominal distension was noted. We address reasons why this may have occurred.

Obesity surgery in the United Kingdom: survey of 970 general surgeons.

The results of a questionnaire survey on obesity surgery sent to 970 consultant general surgeons working in the United Kingdom National Health Service are presented. The response rate was 37%. There were 38 surgeons actively practising this surgery. The majority were performing a gastric procedure, mostly gastroplasty, but some did gastric bypass or banding. Three were doing the biliopancreatic bypass. Most surgeons were doing less than 10 operations a year. A total of 109 expressed an interest in attending a UK symposium and 59 would participate in a UK Bariatric Register. This practice, though only a small part of UK surgery, is larger than expected.

In vitro laser nerve repair: protein solder strip irradiation or irradiation alone?

BACKGROUND: This study investigated the potential of sutureless nerve repair using two promising laser fusion methods: direct 2 microns irradiation of the epineurium, and protein solder assisted epineurial fusion using a 800 nm laser. MATERIALS AND METHODS: Laser anastomosis of the rat sciatic nerve was performed in vitro without stay sutures in two groups of six animals. In the first group, direct laser fusion used a pulsed Cr, Tm: YAG laser. In the second group an albumin-based fluid solder containing the dye indocyanine green was applied to the epineurium, then irradiated with a diode laser. These two techniques were compared with regards to coaptation success and axonal damage. RESULTS: Direct laser welding produced weak bonds despite microscopic investigation of the irradiated nerves showing fusion of the epineurium. The unsatisfactory bonding can be attributed to poor tissue overlap and insufficient protein in the thin epineurium denaturation of underlying axons was also observed. In contrast, the laser solder method produced successful welds with greatly reduced axonal damage, and significantly improved the tensile strength. CONCLUSIONS: This study confirmed the technical possibilities of sutureless nerve anastomosis. Laser activated solders enable stronger bonds, by the addition of protein to the anastomosis site, and less thermal damage to underlying tissue through selective absorption of laser energy by dye in the solder. Further in vivo studies are required before drawing final conclusions.