Sub-lethal toxicity of five disinfection by-products on microalgae determined by flow cytometry - Lines of evidence for adverse outcome pathways.

Standardised tests are often used to determine the ecotoxicity of chemicals and focus mainly on one or a few generic endpoints (e.g. mortality, growth), but information on the sub-cellular processes leading to these effects remain usually partial or missing. Flow cytometry (FCM) can be a practical tool to study the physiological responses of individual cells (such as microalgae) exposed to a stress via the use of fluorochromes and their morphology and natural autofluorescence. This work aimed to assess the effects of five chlorine-based disinfection by-products (DBPs) taken individually on growth and sub-cellular endpoints of the green microalgae Raphidocelis subcapitata. These five DBPs, characteristic of a chlorinated effluent, are the following monochloroacetic acid (MCAA), dichloroacetic acid (DCAA), trichloroacetic acid (TCAA), bromochloroacetic acid (BCAA) and 1,1-dichloropropan-2-one (1,1-DCP). Results showed that 1,1-DCP had the strongest effect on growth inhibition (EC50 = 1.8 mg.L-1), followed by MCAA, TCAA, BCAA and DCAA (EC50 of 10.1, 15.7, 27.3 and 64.5 mg.L-1 respectively). Neutral lipid content, reactive oxygen species (ROS) formation, red autofluorescence, green autofluorescence, size and intracellular complexity were significantly affected by the exposure to the five DBPs. Only mitochondrial membrane potential did not show any variation. Important cellular damages (>10%) were observed for only two of the chemicals (BCAA and 1,1-DCP) and were probably due to ROS formation. The most sensitive and informative sub-lethal parameter studied was metabolic activity (esterase activity), for which three types of response were observed. Combining all this information, an adverse outcome pathways framework was proposed to explain the effect of the targeted chemicals on R. subcapitata. Based on these results, both FCM sub-cellular analysis and conventional endpoint of algal toxicity were found to be complementary approaches.

Evaluation of the OECD QSAR toolbox automatic workflow for the prediction of the acute toxicity of organic chemicals to fathead minnow.

Regulatory frameworks require information on acute fish toxicity to ensure environmental protection. The experimental assessment of this property relies on a substantial number of fish to be tested and it is in conflict with the current drive to replace in vivo testing. For this reason, alternatives to in vivo testing have been proposed during the past years. Among these alternatives, there are Quantitative Structure-Activity Relationships (QSAR) that require the sole knowledge of chemical structure to yield predictions of toxicities. In this context, the OECD QSAR Toolbox is one of the leading QSAR tools for regulatory purposes that enables the prediction of fish toxicities. The aim of this work is to provide evidence about the predictive reliability of the automated workflow for predicting acute toxicity in fish which is embedded within this toolbox. The results herein presented show that the logic underpinning this automated workflow can predict with a reliability that, in the majority of cases, is comparable to inter-laboratory variability and, in a significant number of cases, is also comparable with intra-laboratory variability. Moreover, considerations on the toxic mode of action provided by the OECD tool proved to be helpful in refining predictions and reducing the number of prediction outliers.

Nanopharmaceuticals (Au-NPs) after use: Experiences with a complex higher tier test design simulating environmental fate and effect.

The current environmental hazard assessment is based on the testing of the pristine substance. However, it cannot be excluded that (nano)pharmaceuticals are excreted into sewage during the use phase followed by entry into wastewater treatment plants (WWTPs). Sorption to sewage sludge or release via effluent can result in modified ecotoxicological effects which possibly can only be detected with a modified test approach. The objective of our study was to investigate a realistic exposure scenario for metallic nanoparticles (NPs) in pharmaceutical products, excreted into effluent, and released into the environment after treatment in WWTPs. The test approach was illustrated by using gold (Au) NPs. Effluent from model WWTPs were investigated in aquatic tests (Daphnia magna, fish cell lines). Sewage sludge was used as a sole food source (Eisenia fetida) or mixed with soil and used as test medium (soil microorganisms, Folsomia candida, Enchytraeus crypticus). To cover the aspect of regulation, the test systems described in OECD-test guidelines (OECD TG 201, 211, 220, 232, 249, 317) were applied. Modifications and additional test approaches were included to meet the needs arising out of the testing of nanomaterials and of the exposure scenarios. The results were assessed regarding the suitability of the test design and the toxicity of Au-NPs. Except for activated sludge as a sole food source for E.fetida, the selected test approach is suitable for the testing of nanomaterials. Additional information can be gained when compared to the common testing of the pristine nanomaterials in the standardized test systems. Effects of Au-NPs were observed in concentrations exceeding the modeled environmental.

Adapting OECD Aquatic Toxicity Tests for Use with Manufactured Nanomaterials: Key Issues and Consensus Recommendations.

The unique or enhanced properties of manufactured nanomaterials (MNs) suggest that their use in nanoenabled products will continue to increase. This will result in increased potential for human and environmental exposure to MNs during manufacturing, use, and disposal of nanoenabled products. Scientifically based risk assessment for MNs necessitates the development of reproducible, standardized hazard testing methods such as those provided by the Organisation of Economic Cooperation and Development (OECD). Currently, there is no comprehensive guidance on how best to address testing issues specific to MN particulate, fibrous, or colloidal properties. This paper summarizes the findings from an expert workshop convened to develop a guidance document that addresses the difficulties encountered when testing MNs using OECD aquatic and sediment test guidelines. Critical components were identified by workshop participants that require specific guidance for MN testing: preparation of dispersions, dose metrics, the importance and challenges associated with maintaining and monitoring exposure levels, and the need for reliable methods to quantify MNs in complex media. To facilitate a scientific advance in the consistency of nanoecotoxicology test results, we identify and discuss critical considerations where expert consensus recommendations were and were not achieved and provide specific research recommendations to resolve issues for which consensus was not reached. This process will enable the development of prescriptive testing guidance for MNs. Critically, we highlight the need to quantify and properly interpret and express exposure during the bioassays used to determine hazard values.

Ecotoxicological assessment of organic wastes spread on land: Towards a proposal of a suitable test battery.

The land spreading of organic wastes in agriculture is a common practice in Europe, under the regulation of the Directive 86/278/EEC. One of the objectives of this Directive is to prevent harmful effects of organic wastes on soil, plants and animals. Despite this regulatory framework, there is still a lack of harmonized ecotoxicological test strategy to assess the environmental hazard of such wastes. The aim of this study was to provide a first step towards the a priori ecotoxicological assessment of organic wastes before their land use. For that purpose, nine different organic wastes were assessed using direct (i.e. terrestrial tests) and indirect (i.e. tests on water eluates) approaches, for a total of thirteen endpoints. Then, multivariate analyzes were used to discriminate the most relevant test strategy, among the application rates and bioassays used. From our results, a draft of test strategy was proposed, using terrestrial bioassays (i.e. earthworms and plants) and a concentration range between one and ten times the recommended application rates of organic wastes.

The use of soil mites in ecotoxicology: a review.

Mites, and especially soil-inhabiting ones, have been less studied than the other invertebrates used in bio-assays for the assessment of soil quality and the hazards of chemicals, although these organisms are included in the regulatory assessment scheme of pesticides. The recent advances in the development of test methods for soil mites groups have provided more information on their sensitivities towards chemicals, which needs to be presented for a more robust assessment of the current trends in soil mite ecotoxicology. Moreover, interestingly mite is the only taxa for which test methods were developed and standardized on predatory organisms. This review summarizes the different protocols for the assessment of chemicals using soil-inhabiting mites, including laboratory, semi-field and field studies. Among the data found in the literature, most of the chemicals assessed with mites were pesticides, while a few environmental samples were assessed with these organisms. Their sensitivities towards chemicals were then compared and discussed regarding other soil invertebrates. Finally, we conclude on the usefulness of soil mites in ecotoxicology, and provide future research trail in this area.

Inter-laboratory validation of an ISO test method for measuring enzyme activities in soil samples using colorimetric substrates.

The evaluation of soil quality requires the use of robust methods to assess biologically based indicators. Among them, enzyme activities are used for several decades, but there is a clear need to update their measurement methods for routine use, in combining feasibility, accuracy, and reliability. To this end, the platform Biochem-Env optimized a miniaturized method to measure enzyme activities in soils using colorimetric substrates in micro-well plates. The standardization of the method was carried out within the framework of ISO/TC 190/SC 4/WG 4 "Soil quality - Biological methods" workgroup, recommending an inter-laboratory evaluation for the publication of a full ISO standard. That evaluation, managed by the platform, was based on the measurement, in six soils of contrasted physicochemical properties, of the ten soil enzyme activities described in the standard. Eight laboratories were involved in the validation study. Only 2.7% of outliers were identified from the analyses of the whole dataset. The repeatability and reproducibility of the method were determined by computing, respectively, the intra-laboratory (CVr,) and inter-laboratory (CVR) coefficients of variation for each soil and enzyme. The mean CVr ranged from 4.5% (unbuffered phosphatase) to 9.9% (α-glucosidase), illustrating a reduced variability of enzyme activities within laboratories. The mean CVR ranged from 13.8% (alkaline phosphatase) to 30.9% (unbuffered phosphatase). Despite this large CVR noticed for unbuffered phosphatase, the method was repeatable, reproducible, and sensitive. It also proved to be applicable for measuring enzyme activities in different types of soils. These results have been found successful by ISO/TC 190/SC4 and resulted in the publication of ISO 20130:2018 standard.

Enhancing the Antioxidant Activity of Technical Lignins by Combining Solvent Fractionation and Ionic-Liquid Treatment.

A grass soda technical lignin (PB1000) underwent a process combining solvent fractionation and treatment with an ionic liquid (IL), and a comprehensive investigation of the structural modifications was performed by using high-performance size-exclusion chromatography, 31 P NMR spectroscopy, thioacidolysis, and GC-MS. Three fractions with distinct reactivity were recovered from successive ethyl acetate (EA), butanone, and methanol extractions. In parallel, a fraction deprived of EA extractives was obtained. The samples were treated with methyl imidazolium bromide ([HMIM]Br) by using either conventional heating or microwave irradiation. The treatment allowed us to solubilize 28 % of the EA-insoluble fraction and yielded additional free phenols in all the fractions, as a consequence of depolymerization and demethylation. The gain of the combined process in terms of antioxidant properties was demonstrated through 2,2-diphenyl-1-picrylhydrazyl (DPPH. ) radical-scavenging tests. Integrating further IL safety-related data and environmental considerations, this study paves the way for the sustainable production of phenolic oligomers competing with commercial antioxidants.

Cigarette butts: A small but hazardous waste, according to European regulation.

The emergence of companies collecting cigarette butts (CB) leads to a new waste stream, exclusively made of butts, whereas they were previously mixed with household and municipal waste. In order to conclude on the classification of this new stream, according to the Waste Framework Directive, three cigarette butts samples were analyzed and submitted to ecotoxicological tests. Hazard properties HP 4 (irritant - skin irritation and eye damage), HP 5 (specific target organ toxicity/aspiration toxicity), HP 6 (acute toxicity), HP 7 (carcinogenic), HP 8 (corrosive), HP 10 (toxic for reproduction), HP 11 (mutagenic) and HP 13 (sensitising) have been assessed by calculation, thanks to the analytical results. HP 14 (ecotoxic) has been evaluated both through calculation method and ecotoxicity tests. Even if the obtained mass balance was not complete, it was still sufficient to classify by calculation CB as hazardous waste, by HP 6 (toxicity), mainly due to their nicotine content. A classification by HP 14 (ecotoxicity) was also determined but only by ecotoxicological tests results, whatever the applied framework (French or "harmonized" test battery). These results highlight the limitation of the classification methodology adopted by European Council which necessitates to identify all compounds to perform a full detailed assessment.

A bacterium-based contact assay for evaluating the quality of solid samples-Results from an international ring-test.

The contact assay measuring the inhibition of Arthrobacter globiformis dehydrogenase activity as an endpoint to evaluate the toxicity of solid samples was tested in an international ring-test to validate its performance for ISO standardization (ISO/CD 18187). This work reports the results of the ring-test involving 9 laboratories from six countries. At least 8 valid data sets were obtained for each sample and more than three quarters of the participants attained the validity criteria defined in the standard. The coefficient of variation within (CVr) and between (CVR) laboratories was generally on average <15% and <30% for negative and positive controls, respectively. Regarding solid samples, the laboratories provided a similar ranking of the samples based on their toxicity, despite some variation in the LOEC values. The logarithmic within-lab standard deviation <0.50 for soils and <0.25 for wastes evidenced a good repeatability. The between-lab variability assessed by a CVR <30%, minimum-maximum factor <4 and a reproducibility standard deviation (SDR) <0.13 for a great part of the solid samples, confirmed the test reproducibility. Overall, this assay proved to be robust, sensitive and feasible for routine use towards the quality assessment of soils and wastes.

Comprehensive Insights into the Thermal Stability, Biodegradability, and Combustion Chemistry of Pyrrolidinium-Based Ionic Liquids.

The use of ionic liquids (ILs) as advanced electrolyte components in electrochemical energy-storage devices is one of the most appealing and emerging options. However, although ILs are hailed as safer and eco-friendly electrolytes, to overcome the limitations imposed by the highly volatile/combustible carbonate-based electrolytes, full-scale and precise appraisal of their overall safety levels under abuse conditions still needs to be fully addressed. With the aim of providing this level of information on the thermal and chemical stabilities, as well as actual fire hazards, herein, a detailed investigation of the short- and long-term thermal stabilities, biodegradability, and combustion behavior of various pyrrolidinium-based ILs, with different alkyl chain lengths, counteranions, and cations, as well as the effect of doping with lithium salts, is described.

Results from a round robin test for the ecotoxicological evaluation of construction products using two leaching tests and an aquatic test battery.

A European round robin test according to ISO 5725-2 was conceptually prepared, realised, and evaluated. The aim was to determine the inter-laboratory variability of the overall process for the ecotoxicological characterization of construction products in eluates and bioassays. To this end, two construction products BAM-G1 (granulate) and HSR-2 (roof sealing sheet), both made of EPDM polymers (rubber), were selected. The granular construction product was eluted in a one stage batch test, the planar product in the Dynamic Surface Leaching test (DSLT). A total of 17 laboratories from 5 countries participated in the round robin test: Germany (12), Austria (2), Belgium (1), Czech Republic (1) and France (1). A test battery of four standardised ecotoxicity tests with algae, daphnia, luminescent bacteria and zebrafish eggs was used. As toxicity measures, EC50 and LID values were calculated. All tests, except the fish egg test, were basically able to demonstrate toxic effects and the level of toxicity. The reproducibility of test results depended on the test specimens and the test organisms. Generally, the variability of the EC50 or LID values increased with the overall level of toxicity. For the very toxic BAM-G1 eluate a relative high variability of CV = 73%-110% was observed for EC50 in all biotests, while for the less toxic HSR-2 eluate the reproducibility of EC50 varied with sensitivity: it was very good (CV = 9.3%) for the daphnia test with the lowest sensitivity, followed by the algae test (CV = 36.4%). The luminescent bacteria test, being the most sensitive bioassay for HSR-2 Eluate, showed the highest variability (CV = 74.8%). When considering the complex overall process the reproducibility of bioassays with eluates from construction products was acceptable.

Validation of a two-generational reproduction test in Daphnia magna: An interlaboratory exercise.

Effects observed within one generation disregard potential detrimental effects that may appear across generations. Previously we have developed a two generation Daphnia magna reproduction test using the OECD TG 211 protocol with a few amendments, including initiating the second generation with third brood neonates produced from first generation individuals. Here we showed the results of an inter-laboratory calibration exercise among 12 partners that aimed to test the robustness and consistency of a two generation Daphnia magna reproduction test. Pyperonyl butoxide (PBO) was used as a test compound. Following experiments, PBO residues were determined by TQD-LC/MS/MS. Chemical analysis denoted minor deviations of measured PBO concentrations in freshly prepared and old test solutions and between real and nominal concentrations in all labs. Other test conditions (water, food, D. magna clone, type of test vessel) varied across partners as allowed in the OECD test guidelines. Cumulative fecundity and intrinsic population growth rates (r) were used to estimate "No observed effect concentrations "NOEC using the solvent control as the control treatment. EC10 and EC-50 values were obtained regression analyses. Eleven of the twelve labs succeeded in meeting the OECD criteria of producing >60 offspring per female in control treatments during 21days in each of the two consecutive generations. Analysis of variance partitioning of cumulative fecundity indicated a relatively good performance of most labs with most of the variance accounted for by PBO (56.4%) and PBO by interlaboratory interactions (20.2%), with multigenerational effects within and across PBO concentrations explaining about 6% of the variance. EC50 values for reproduction and population growth rates were on average 16.6 and 20.8% lower among second generation individuals, respectively. In summary these results suggest that the proposed assay is reproducible but cumulative toxicity in the second generation cannot reliably be detected with this assay.

Selecting a battery of bioassays for ecotoxicological characterization of wastes.

This study was conducted in France within the context of waste classification (Hazardous Waste Council Directive 91/689/EEC), and focused on "ecotoxic" property (H14). In 1998, an experimental test strategy was developed to assess ecotoxicological properties of wastes using a battery of six standardized bioassays. This combined direct and indirect approaches integrating two solid-phase tests: emergence and growth inhibition of Lactuca sativa (14 days), mortality of Eisenia fetida (14 days) and four standardized tests performed on water extracts from wastes: growth inhibition of Pseudokirchneriella subcapitata (3 days), inhibition of mobility of Daphnia magna (48 h), inhibition of reproduction of Ceriodaphnia dubia (7 days), inhibition of light emission of Vibrio fischeri (30 min). This study aimed to set up preliminary conclusions on relevancy of this experimental test strategy, based on data obtained since 1998. Results were analyzed from the combined use of Hierarchical Cluster Analysis, Principal Component Analysis and Nonlinear Mapping. These multivariate analyses clearly showed that it was possible to reduce this number of tests without changing the typology of the wastes. A battery of bioassays including one solid phase test and two tests performed on water extracts (L. sativa, V. fischeri and C. dubia) was found as an optimal solution for characterizing the toxicity of the studied wastes. This optimal battery represents a good basis for determining the H14 property.

How terrestrial snails can be used in risk assessment of soils.

Among soil invertebrates, terrestrial snails are herbivorous and detritivorous organisms exposed to polluted soils by both digestive and cutaneous routes. Using laboratory-reared snails (Helix aspersa aspersa), we describe how the effects of contaminants on survival and growth of snails can be evaluated in laboratory bioassays. A national ring test was performed to assess the effect of Cd added to the soil or to the food. The ecotoxicity of sewage sludge also was evaluated. The present results demonstrate that toxicity depends on both the pollutants and the exposure route. Cadmium was sixfold more toxic for snails exposed via food contamination (median effective concentration [EC50], 68-139 microg/g) than via soil contamination (EC50, 534-877 microg/g), whereas the opposite occurred with the sewage sludge (EC50, 55% of sludge in the food and 10% of waste in the soil). A logistic relationship linked growth inhibition and internal Cd concentrations, which can reach 2,000 microg/g in the viscera of snails exposed to 626 microg/g in the food. No clear trend was found between Cu, Zn, Pb, Cr, and Ni concentrations in the sludge and in snail tissues. These data enabled the development of an international standard, which should enhance the use of terrestrial gastropods for both fundamental research and routine risk assessment in the terrestrial environment.

Bioassay battery interlaboratory investigation of emerging contaminants in spiked water extracts - Towards the implementation of bioanalytical monitoring tools in water quality assessment and monitoring.

Bioassays are particularly useful tools to link the chemical and ecological assessments in water quality monitoring. Different methods cover a broad range of toxicity mechanisms in diverse organisms, and account for risks posed by non-target compounds and mixtures. Many tests are already applied in chemical and waste assessments, and stakeholders from the science-police interface have recommended their integration in regulatory water quality monitoring. Still, there is a need to address bioassay suitability to evaluate water samples containing emerging pollutants, which are a current priority in water quality monitoring. The presented interlaboratory study (ILS) verified whether a battery of miniaturized bioassays, conducted in 11 different laboratories following their own protocols, would produce comparable results when applied to evaluate blinded samples consisting of a pristine water extract spiked with four emerging pollutants as single chemicals or mixtures, i.e. triclosan, acridine, 17α-ethinylestradiol (EE2) and 3-nitrobenzanthrone (3-NBA). Assays evaluated effects on aquatic organisms from three different trophic levels (algae, daphnids, zebrafish embryos) and mechanism-specific effects using in vitro estrogenicity (ER-Luc, YES) and mutagenicity (Ames fluctuation) assays. The test battery presented complementary sensitivity and specificity to evaluate the different blinded water extract spikes. Aquatic organisms differed in terms of sensitivity to triclosan (algae > daphnids > fish) and acridine (fish > daphnids > algae) spikes, confirming the complementary role of the three taxa for water quality assessment. Estrogenicity and mutagenicity assays identified with high precision the respective mechanism-specific effects of spikes even when non-specific toxicity occurred in mixture. For estrogenicity, although differences were observed between assays and models, EE2 spike relative induction EC50 values were comparable to the literature, and E2/EE2 equivalency factors reliably reflected the sample content. In the Ames, strong revertant induction occurred following 3-NBA spike incubation with the TA98 strain, which was of lower magnitude after metabolic transformation and when compared to TA100. Differences in experimental protocols, model organisms, and data analysis can be sources of variation, indicating that respective harmonized standard procedures should be followed when implementing bioassays in water monitoring. Together with other ongoing activities for the validation of a basic bioassay battery, the present study is an important step towards the implementation of bioanalytical monitoring tools in water quality assessment and monitoring.

Exploration of Daphnia behavioral effect profiles induced by a broad range of toxicants with different modes of action.

Behavior is increasingly reported as a sensitive and early indicator of toxicant stress in aquatic organisms. However, the systematic understanding of behavioral effects and comparisons between effect profiles is hampered because the available studies are limited to few chemicals and differ in the exposure conditions and effect parameters examined. The aims of the present study were 1) to explore behavioral responses of Daphnia magna exposed to different toxicants, 2) to compare behavioral effect profiles with regard to chemical modes of action, and 3) to determine the sensitivity and response time of behavioral parameters in a new multi-cell exposure system named Multi-DaphTrack compared with currently utilized tests. Twelve compounds covering different modes of toxic action were selected to sample a wide range of potential effect profiles. Acute standard immobilization tests and 48 h of behavioral tracking were performed in the customized Multi-DaphTrack system and a single-cell commercialized biological early warning system. Contrasting behavioral profiles were observed for average speed (i.e., intensity, time of effect onset, effect duration), but no distinct behavioral profiles could be drawn from the chemical mode of action. Most compounds tested in the Multi-DaphTrack system induced an early and significant average speed increase at concentrations near or below the 10% effective concentration (48 h) of the acute immobilization test, demonstrating that the Multi-DaphTrack system is fast and sensitive. To conclude, behavior endpoints could be used as an alternative or complement to the current acute standard test or chemical analysis for the predictive evaluation of ecotoxic effects of effluents or water bodies.

Coupling of OECD standardized test and immunomarkers to select the most environmentally benign ionic liquids option--towards an innovative "safety by design" approach.

This paper proposed a potential industrial accompaniment to reduce ionic liquid harmfulness by a novel combination of OECD Daphnia magna standardized test and fish immunomarkers. The combination of these two tests allowed multicriteria examination of ILs impacts in different organisms and trophic levels. The work provided new data for legislation and opened a door towards an integrative environmental evaluation due to direct implications of immune system in fish and ecosystem health. Whatever the species, each IL tested induced deleterious effects suggesting that toxic impact was especially due to IL lipophilicity properties. Nevertheless, cation moieties of ILs seemed to draw overall toxicity of ILs to significant extent as supported by lower cell mortality shown with imidazolium-based ILs compared to phosphonium-based ILs. However, the anions moieties have some additional effect, as revealed by quite dissimilar toxicity within same IL family. Concerning the more integrative biomarkers, the cationic-based ILs tested possessed also dissimilar effect on immune system of fish, especially on leucocyte distribution, lysosomal membrane integrity and phagocytosis activity. These results confirm that ILs toxicity could be influenced by design and that chemical engineering processes can integrate ecological footprint reduction strategies for successful IL utilization in the future.

Soil genotoxicity assessment--results of an interlaboratory study on the Vicia micronucleus assay in the context of ISO standardization.

The Vicia micronucleus assay was standardized in an international protocol, ISO 29200, "Assessment of genotoxic effects on higher plants-Vicia faba micronucleus test," for soil or soil materials (e.g., compost, sludge, sediment, waste, and fertilizing materials). The aim of this interlaboratory study on the Vicia micronucleus assay was to investigate the robustness of this in vivo assay in terms of its applicability in different countries where each participant were asked to use their own seeds and reference soil, in agreement with the ISO 29200 standard. The ISO 29200 standard protocol was adopted for this study, and seven laboratories from three countries (France, Italy, and Brazil) participated in the study. Negative and positive controls were correctly evaluated by 100 % of the participants. In the solid-phase test, the micronucleus frequency (number of micronuclei/1,000 cells) varied from 0.0 to 1.8 for the negative control (i.e., Hoagland's solution) and from 5.8 to 85.7 for the positive control (i.e., maleic hydrazide), while these values varied from 0.0 to 1.7 for the negative control and from 14.3 to 97.7 for the positive control in the case of liquid-phase test. The variability in the data obtained does not adversely affect the robustness of the protocol assessed, on the condition that the methodology described in the standard ISO 29200 is strictly respected. Thus, the Vicia micronucleus test (ISO 29200) is appropriate for complementing prokaryotic or in vitro tests cited in legislation related to risk assessment of genotoxicity potential.

Inter-laboratory trial of a standardized sediment contact test with the aquatic plant Myriophyllum aquaticum (ISO 16191).

A whole-sediment toxicity test with Myriophyllum aquaticum has been developed by the German Federal Institute of Hydrology and standardized within the International Organization for Standardization (ISO; ISO 16191). An international ring-test was performed to evaluate the precision of the test method. Four sediments (artificial, natural) were tested. Test duration was 10 d, and test endpoint was inhibition of growth rate (r) based on fresh weight data. Eighteen of 21 laboratories met the validity criterion of r ≥ 0.09 d(-1) in the control. Results from 4 tests that did not conform to test-performance criteria were excluded from statistical evaluation. The inter-laboratory variability of growth rates (20.6%-25.0%) and inhibition (26.6%-39.9%) was comparable with the variability of other standardized bioassays. The mean test-internal variability of the controls was low (7% [control], 9.7% [solvent control]), yielding a high discriminatory power of the given test design (median minimum detectable differences [MDD] 13% to 15%). To ensure these MDDs, an additional validity criterion of CV ≤ 15% of the growth rate in the controls was recommended. As a positive control, 90 mg 3,5-dichlorophenol/kg sediment dry mass was tested. The range of the expected growth inhibition was proposed to be 35 ± 15%. The ring test results demonstrated the reliability of the ISO 16191 toxicity test and its suitability as a tool to assess the toxicity of sediment and dredged material.