DNA damage in workers exposed to mineral oils.

Mineral oils, untreated or mildly treated, have been classified in group 1 as a potential source of cancer by the International Agency for Research on Cancer (IARC). Although numerous studies have implicated metalworking fluids (MWFs) as human carcinogens, toxicology data regarding the mechanism of carcinogenicity are limited. This study is intended to examine the systemic effects of machining workers' exposure to MWFs. The potential toxicity of mineral oils was investigated in 65 lathe workers compared to controls (66 men). The occupational exposure was measured by the National Institute for Occupational Safety and Health (NIOSH) 5026. The DNA damage has been examined by the comet assay method. According to the field assessments, the time-weighted average (TWA) exposure to mineral oil mist was 7.67 ± 3.21 mg/m3. A comet assay of peripheral blood cells showed that tail length (TL) and olive moment (OM) were significantly higher in the exposed group (p < 0.05). A multiple logistic regression analysis revealed that, within subjects with over 10 years of exposure, the odds ratio of worker with high TL, percent of DNA in tail, OM, and tail moment (TM) were 1.68, 1.41, 1.71, and 2.71, respectively. DNA strand break in exposed workers was associated with higher exposure time in years. Mineral oil toxicity could be altered in the presence of by-products and impurities. For a better understanding of genotoxicity, further studies are required.

Human epithelial lung cell toxicity assessment of collected graphite particles from an iron casting industry (in vitro study).

Workers in the iron casting industries are exposed to various chemicals, especially graphite in furnace process. This study aims to investigate the toxic effects of graphite particles on human lung cells. Particle characteristics were confirmed by electron microscope and light scattering. Cell viability and oxidative stress markers were measured. The expression of oxidative repair genes, namely OGG1, MTH1, and ITPA, was evaluated. The average particle size was determined to be 172.1 ± 11.96 nm. The median inhibition concentration (IC50) of graphite particles was 46.75 µg/mL. Notably, 25 and 50 µg/mL concentrations resulted in significant GSH depletion and MDA production. The high concentration of graphite particles (200 µg/mL) led to OGG1 suppression and increased MTH1 expression. Based on these findings, graphite exposure may induce toxicity in human lung cells by increasing oxidative stress. Further research is necessary to fully understand the mechanisms underlying graphite toxicity.

Application of a novel exposure limit approach for co-exposure of chemicals: a field study by in-vitro design.

This study has suggested an occupational exposure limit (OEL) based on the co-exposure approach in an iron-foundry industry. Respirable dust was collected in an iron casting industry using the NIOSH 0600 method. The DNA damage was obtained by comet assay. The lower confidence interval of the benchmark dose (BMDL) was employed for exposure limit evaluation. The estimated BMDL of the cell line was extrapolated to human subjects. Based on the Hill model, a BMDL 1.65 µg for chemical mixture has been estimated for the A549 cell line. According to uncertainty factors, permitted daily exposure (PDE) was predicted in humans. However, PDE of 3.9 µg/m3 was specified as the time-weighted average limit for toxic respirable dust in the casting industry. In this study, OEL for active respirable dust in the casting industry has been proposed. The industry-based standard for active respirable dust has been proposed for better management of co-exposure.

Lung cell toxicity of co-exposure to airborne particulate matter and extremely low-frequency magnetic field.

Although the toxic effects of urban airborne particulate matter (PM) have been known on lung cells, there is less attention to co-exposure to PM and extremely low frequency magnetic (ELF-MF) in occupational settings. The present study investigated the influences of PM and ELF-MF co-exposure on toxicity in human lung cells (A549).In this case, total PM (TPM) was evaluated according to NIOSH-0500. The TPM SiO2 and metal contents were determined based on NIOSH-7602 and 7302, respectively. Besides, 900 mG ELF-MF exposure was simulated based on field measurements. The toxicity mechanisms were assessed by examining malondialdehyde, glutathione ratio, gene expression, and DNA strand breaks. Also, the toxicity indicators of the TPM samples were MDA generation, glutathione depletion, and DNA damage, and their impacts were analysed at doses below the LD50 (4 µg).In addition, gene expression of OGG1 and MTH1 was upregulated after TPM exposure at the lowest dose (2 µg). But ITPA was upregulated in the presence of ELF-MF. The co-exposure to TPM and ELF-MF decreased oxidative stress and DNA damage levels compared to a single exposure to TPM.Although the ELF-MF reduced toxicity in response to TPM, this reduction was not lower than the unexposed cells.

Occupational exposure to metal-rich particulate matter modifies the expression of repair genes in foundry workers.

Foundry workers are exposed to numerous occupational health hazards, which may result in increased risk of cancer, respiratory disease, and other diseases. Oxidative stress is known to be involved in the pathogenesis of such diseases. The present study aimed to investigate the association between multiple occupational exposures in foundry workers and expression of deoxyribonucleic acid (DNA) repair genes as a biomarker of oxidative DNA damage. The study sample comprised 17 foundry workers and 27 matched control subjects. Expression of 8-oxoguanine DNA glycosylase-1 (OGG1), inosine triphosphate pyrophosphate (ITPA), and MutT homolog 1 (MTH1) in peripheral blood was examined using the real-time polymerase chain reaction method. Air sampling to determine exposure to metal-rich particulate matter and measurement of extremely low-frequency electromagnetic fields (ELF-EMFs) were conducted according to the National Institute for Occupational Safety and Health standard methods. Personal air sampling revealed that occupational exposure to particulate matter exceeded the threshold limit values (TLVs) in 76% of the workstations, whereas ELF-EMF exposure appeared to be lower than the TLV. ITPA was significantly upregulated in foundry workers compared with control subjects, whereas no significant difference was observed for OGG1 and MTH1. Moreover, ITPA was strongly and positively correlated with the concentration of metal-rich particulate matter in foundry workers. No significant correlation was found between ELF-EMF exposure and expression of DNA repair genes. DNA repair gene expression may be a sensitive biomarker for occupational exposures, which suggests an involvement of oxidative stress in metal-induced toxicity. Further studies are needed to determine the role of DNA repair gene expression in response to occupational/environmental hazards.

DNA effects of low level occupational exposure to extremely low frequency electromagnetic fields (50/60 Hz).

AIMS: Exposure to extremely low frequency magnetic fields (ELF-MF) occurs from natural and artificial sources. Although ELF-MF has been classified as a suspected humans carcinogen agent by the International Agency for Research on Cancer, little is known of the effects of ELF-MF at lower exposure levels of the recommended range. In the present study, DNA damage in the peripheral blood cells of power line workers was investigated. MATERIALS AND METHODS: Occupational exposure to ELF-MF in a power plant was measured using the National Institute for Occupational Safety and Health (NIOSH) manual. Single-strand breaks (SSBs) in DNA were evaluated in 29 male utility workers as the exposed population and 28 male support personnel as the control subjects using the comet assay. Effects of ELF-MF on subjects were evaluated using DNA percent in tails, tail length, olive length, and tail moment. RESULTS: Occupational exposure levels to ELF-MF in the utility workers were less than the threshold limit values (TLV) recommended by the American Conference of Government Industrial Hygienist (ACGIH). The median value of the magnetic field at the working sites was 0.85 µT. Induction of DNA damage was observed for the exposed workers compared with the controls. Olive length, tail moment, and tail DNA percent increased significantly (p < 0.05) in the utility workers. CONCLUSIONS: Exposure to ELF-MF at levels less than the ACGIH exposure limit can produce DNA strand breaks.

Risk assessment of chemical mixtures by benchmark dose-principle component analysis approach in occupational exposure.

Mixtures of organic solvents are widely used in industrial processes. Risk assessment for chemical co-exposure has always been a challenge in past years. The present study aims to employ principle component analysis (PCA) to produce an entry for benchmark dose approximation in shoemakers based on the color vision effect. A total of 134 subjects consisting of 67 shoemakers and 67 staff workers were employed for Benchmark Dose (BMD) evaluation. Occupational exposure to benzene, toluene, xylene, and n-hexane was evaluated using NIOSH 1501 and OSHA ID-07 methods. The color vision effect was quantified using Lanthony D-15 desaturated test (D-15d). PCA was run for cumulative exposure dose (CED) of the solvents by MATLAB 2018. Finally, the lowest 95% confidence limit of the benchmark dose (BMDL) was determined using US EPA benchmark dose software (BMDS) version 3.2.1. The color confusion index (CCI) level in shoemakers increased from 1 to 1.15 by a median of 1.07. There was a significant difference in the CCI level (p value<0.0001) between exposed and control subjects. The first score of PCA was used as intake dose level (IDL) in solvents co-exposure. Using BMD analysis, the log-logistics model was fitted with a p-value> 0.1 and the lowest BMDL level. BMDL level was evaluated at 1.63, 10.25, 2.21, and 3.35 ppm for benzene, toluene, xylene, and n-hexane, respectively. The results showed a risk of color vision effect with co-exposure to solvents at different levels in the occupational exposure standards. In conclusion BMDL-PCA approach has been suggested for the risk assessment of chemical co-exposure.

Effect of tea consumption on oxidative stress and expression of DNA repair genes among metal press workers exposed to occupational noise.

Several studies have shown that tea consumption is associated with beneficial effects on human health, which is mainly explained by the antioxidant properties of tea. However, evidence on the effect of nutrition interventions on oxidative stress in an occupational setting is limited. Therefore, the present study aimed to investigate the effect of tea consumption on oxidative stress in noise-exposed metal press workers. The study sample comprised 24 metal press workers and 24 age-matched control subjects. Metal press workers were assigned to the intervention group consisting of a glass of jujube tea and a portion of raisins per day for 4 weeks. Full-shift noise dosimetry was performed to measure noise exposure with average noise levels of 89.91 ± 2.92 dB for metal press workers and 61.54 ± 1.03 dB for control subjects. Elevated levels of baseline oxidative stress were observed in metal press workers compared with control subjects as indicated by significantly decreased levels of total antioxidant capacity (TAC) (P = 0.026) and total thiol groups (TTG) (P = 0.0001), whereas no significant difference was observed in case of malondialdehyde (MDA). Intervention with jujube tea and raisins in metal press workers led to a decrease of oxidative stress as displayed by increased levels of TAC and TTG (P = 0.0001) as well as decreased levels of MDA (P = 0.012). Moreover, the intervention significantly altered expression of repair genes in metal press workers as demonstrated by decreased levels of OGG1 (P = 0.0002) and ITPA (P = 0.009), whereas no significant difference was observed in case of MTH1. These data suggest that regular tea consumption may protect occupational noise-exposed subjects from oxidative damages.

A Simple and Fast Method Based on New Magnetic Ion Imprinted Polymer as a Highly Selective Sorbent for Preconcentration and Determination of Cadmium in Environmental Samples.

BACKGROUND: The analysis of heavy metals at trace level is one of the main toxicologists concern, due to their vital rules in human`s life. Cadmium is one of these toxic heavy metals, which released to the environment from various industries. METHODS: In order to determine Cd (II) ions in various matrices magnetic ion-imprinted polymer (IIP) method has been developed and applied. This nano-sorbent has been synthesized by coating an IIP compound on Fe3O4 nanoparticles core to achieve highest surface area. This polymer has been used to evaluate Cd (II) levels in food, river, and wastewater in Tehran, Iran. RESULTS: Fe3O4@Cd-IIP was stable up to 300 °C. The various factors such as sample pH (optimized as 7), elution/sorption time (5 min), eluent amount (4 mL HCL), and its concentration (2 mol L-1) were optimized. Analysis instrument in all steps was Flame Atomic Abortion Spectrophotometer (FAAS). In this study, the detection limit was determined down to 0.6 µg L-1. CONCLUSION: This method was applied successfully for the preconcentration and determination of Cd (II) ions in environmental samples obtained from rivers, various foods and wastewater. In addition, the accuracy of the method was confirmed by analyzing a certified reference material (Seronorm LOT NO2525) and spiked real samples.