Degradation Feature Extraction Method for Prognostics of an Extruder Screw Using Multi-Source Monitoring Data.

Laboratory-scale data on a component level are frequently used for prognostics because acquiring them is time and cost efficient. However, they do not reflect actual field conditions. As prognostics is for an in-service system, the developed prognostic methods must be validated using real operational data obtained from an actual system. Because obtaining real operational data is much more expensive than obtaining test-level data, studies employing field data are scarce. In this study, a prognostic method for screws was presented by employing multi-source real operational data obtained from a micro-extrusion system. The analysis of real operational data is more challenging than that of test-level data because the mutual effect of each component in the system is chaotically reflected in the former. This paper presents a degradation feature extraction method for interpreting complex signals for a real extrusion system based on the physical and mechanical properties of the system as well as operational data. The data were analyzed based on general physical properties and the inferred interpretation was verified using the data. The extracted feature exhibits valid degradation behavior and is used to predict the remaining useful life of the screw in a real extrusion system.

Fault Diagnosis Method for Human Coexistence Robots Based on Convolutional Neural Networks Using Time-Series Data Generation and Image Encoding.

This paper proposes fault diagnosis methods aimed at proactively preventing potential safety issues in robot systems, particularly human coexistence robots (HCRs) used in industrial environments. The data were collected from durability tests of the driving module for HCRs, gathering time-series vibration data until the module failed. In this study, to apply classification methods in the absence of post-failure data, the initial 50% of the collected data were designated as the normal section, and the data from the 10 h immediately preceding the failure were selected as the fault section. To generate additional data for the limited fault dataset, the Wasserstein generative adversarial networks with gradient penalty (WGAN-GP) model was utilized and residual connections were added to the generator to maintain the basic structure while preventing the loss of key features of the data. Considering that the performance of image encoding techniques varies depending on the dataset type, this study applied and compared five image encoding methods and four CNN models to facilitate the selection of the most suitable algorithm. The time-series data were converted into image data using image encoding techniques including recurrence plot, Gramian angular field, Markov transition field, spectrogram, and scalogram. These images were then applied to CNN models, including VGGNet, GoogleNet, ResNet, and DenseNet, to calculate the accuracy of fault diagnosis and compare the performance of each model. The experimental results demonstrated significant improvements in diagnostic accuracy when employing the WGAN-GP model to generate fault data, and among the image encoding techniques and convolutional neural network models, spectrogram and DenseNet exhibited superior performance, respectively.

Rheological properties and preclinical data of novel hyaluronic acid filler containing epidermal growth factor.

Recently, a novel hyaluronic acid (HA) filler containing the epidermal growth factor (EGF) was developed. The objective of this study was to evaluate the rheological properties, preclinical efficacy and biocompatibility of the EGF-containing HA filler (HA-EGF filler) using a photoaged mouse model. The rheological properties of the new HA-EGF filler were assessed. Twenty-four female hairless mice (SKH1) underwent photoaging induction with 8 weeks of ultraviolet-B irradiation. The mice were randomly divided into four groups and intradermally injected 100 µl of phosphate-buffered saline, HA-EGF filler, HA filler or polynucleotide (PN) into the dorsal region. We examined the effect of fillers on photoaged skin by dermoscopic examination. Furthermore, histological evaluation with immunohistochemical staining was performed to determine the biocompatibility and collagen formation at the 10th week. A real-time quantitative polymerase chain reaction analysis and western blot test assessed the expression of collagen I/III, matrix metalloproteinases (MMPs) and transforming growth factor. The viscosity and elasticity of the HA-EGF filler were lower than those of the HA filler. Histological evaluation revealed no significant differences in the collagen synthesis between the HA-EGF, HA and PN filler groups. No inflammation was observed during the experimental period. The HA-EGF filler induced type I/III collagen production and downregulated the expression of MMP-1, 3 and 9. Our results suggest that the novel HA-EGF filler may be an additional therapeutic option for photoaged skin, which works by inducing collagen synthesis. Based on these preclinical results, further well-controlled clinical studies are required.

Performance evaluation of biodegradable polymer sirolimus and ascorbic acid eluting stent systems.

The purpose of this study was to evaluate the performance of biodegradable polymer sirolimus and ascorbic acid eluting stent systems with four commercially available drug-eluting stents (DES). We investigated the characterization of mechanical properties by dimension, foreshortening, recoil, radial force, crossing profile, folding shape, trackability, and dislodgement force. Additionally, we identify the safety and efficacy evaluation through registry experiments. Each foreshortening and recoil of D + Storm® DES is 1.3 and 3.70%, which has better performance than other products. A post-marketing clinical study to evaluate the performance and safety of D + Storm® DES is ongoing in real-world clinical settings. Two hundred one patients were enrolled in this study and have now completed follow-up for up to 1 month. No major adverse cardiovascular event (MACE) occurred in any subjects, confirming the safety of D + Storm® DES in the clinical setting. An additional approximately 100 subjects will be enrolled in the study and the final safety profile will be assessed in 300 patients. In conclusion, this study reported the objective evaluation of DES performance and compared the mechanical responses of four types of DES available in the market. There is little difference between the four cardiovascular stents in terms of mechanical features, and it can help choose the most suitable stent in a specific clinical situation if those features are understood. Graphical abstract.

Three-Dimensional Foot Position Estimation Based on Footprint Shadow Image Processing and Deep Learning for Smart Trampoline Fitness System.

In the wake of COVID-19, the digital fitness market combining health equipment and ICT technologies is experiencing unexpected high growth. A smart trampoline fitness system is a new representative home exercise equipment for muscle strengthening and rehabilitation exercises. Recognizing the motions of the user and evaluating user activity is critical for implementing its self-guided exercising system. This study aimed to estimate the three-dimensional positions of the user's foot using deep learning-based image processing algorithms for footprint shadow images acquired from the system. The proposed system comprises a jumping fitness trampoline; an upward-looking camera with a wide-angle and fish-eye lens; and an embedded board to process deep learning algorithms. Compared with our previous approach, which suffered from a geometric calibration process, a camera calibration method for highly distorted images, and algorithmic sensitivity to environmental changes such as illumination conditions, the proposed deep learning algorithm utilizes end-to-end learning without calibration. The network is configured with a modified Fast-RCNN based on ResNet-50, where the region proposal network is modified to process location regression different from box regression. To verify the effectiveness and accuracy of the proposed algorithm, a series of experiments are performed using a prototype system with a robotic manipulator to handle a foot mockup. The three root mean square errors corresponding to X, Y, and Z directions were revealed to be 8.32, 15.14, and 4.05 mm, respectively. Thus, the system can be utilized for motion recognition and performance evaluation of jumping exercises.

Heminiphilus faecis gen. nov., sp. nov., a member of the family Muribaculaceae, isolated from mouse faeces and emended description of the genus Muribaculum.

The novel strain AM35T was isolated from the faeces of C57BL/6 mice. These cells are strictly anaerobic, gram negative, oxidase negative, catalase positive, rod-shaped and non-motile. The strain produced creamy yellowish colonies on brain heart infusion (BHI) agar with hemin. Growth was investigated at 30-41 °C in the presence of 0.5-1.5% (w/v) NaCl at pH 6.5-8.5. Taxonomic analysis based on 16S rRNA gene sequencing revealed that strain AM35T is affiliated with the family Muribaculaceae and closely related to the genus Muribaculum. The genomic DNA G + C content of strain AM35T was 47.8 mol%. We detected the whole-cell sugars ribose and galactose; meso-2,6-diaminopimelic acid was absent. The major fatty acids (> 10%) were anteiso-C15:0 and iso-C15:0; the major polar lipid was phosphatidylethanolamine. The major respiratory quinones were MK-10 and MK-11. Based on our phylogenetic, phenotypic and chemotaxonomic analyses, strain AM35T represents a novel genus within the family Muribaculaceae, for which we propose the name Heminiphilus faecis gen. nov., sp. nov. The type strain of Heminiphilus faecis gen. nov., sp. nov. is AM35T (= KCTC 15907 T = DSM 110151 T).

Preclinical Evaluation of a Novel Polymer-free Everolimus-eluting Stent in a Mid-term Porcine Coronary Restenosis Model.

BACKGROUND: Titanium dioxide films exhibit good biocompatibility and may be effective as drug-binding matrices for drug-eluting stents. We conducted a mid-term evaluation of a novel polymer-free everolimus-eluting stent using nitrogen-doped titanium dioxide film deposition (TIGEREVOLUTION®) in comparison with a commercial durable polymer everolimus-eluting stent (XIENCE Alpine®) in a porcine coronary restenosis model. METHODS: Twenty-eight coronary arteries from 14 mini-pigs were randomly allocated to TIGEREVOLUTION® stent and XIENCE Alpine® stent groups. The stents were implanted in the coronary artery at a 1.1-1.2:1 stent-to-artery ratio. Eleven stented coronary arteries in each group were finally analyzed using coronary angiography, optical coherence tomography, and histopathologic evaluation 6 months after stenting. RESULTS: Quantitative coronary analysis showed no significant differences in the pre-procedural, post-procedural, and 6-month lumen diameters between the groups. In the volumetric analysis of optical coherence tomography at 6 months, no significant differences were observed in stent volume, lumen volume, and percent area stenosis between the groups. There were no significant differences in injury score, inflammation score, or fibrin score between the groups, although the fibrin score was zero in the TIGEREVOLUTION® stent group (0 vs. 0.07 ± 0.11, P = 0.180). CONCLUSION: Preclinical evaluation, including optical coherence tomographic findings 6 months after stenting, demonstrated that the TIGEREVOLUTION® stent exhibited efficacy and safety comparable with the XIENCE Alpine® stent, supporting the need for further clinical studies on the TIGEREVOLUTION® stent.

Adaptive Hit-Quality Index for Raman Spectrum Identification.

The recognition capability of the identification system using Raman spectroscopy is increasing with the demands in the field. Among the various approaches that determine the identity of a target, signal correlation using a moving window is one of the most effective and intuitive methods. In this paper, we report a new correlation method that is robust to spectral intensity variations. Using the peak distribution of a given spectrum, this method adaptively determines meaningful spectral regions for the identification target. Three commercial Raman spectrometer and a 14 033 library were included in the study, which was used for a library-based chemical discrimination test and mixed material analysis experiments. According to the identification experimental results, the proposed method correctly identified all of the spectra and maintained a mean correlation score above 0.95 while maintaining the correlation score of nontarget materials as low as possible.

High-Throughput Stamping of Hybrid Functional Surfaces.

Hydrophobic-hydrophilic hybrid surfaces, sometimes termed biphilic surfaces, have shown potential to enhance condensation and boiling heat transfer, anti-icing, and fog harvesting performance. However, state of art techniques to develop these surfaces have limited substrate selection, poor scalability, and lengthy and costly fabrication methods. Here, we develop a simple, scalable, and rapid stamping technique for hybrid surfaces with spatially controlled wettability. To enable stamping, rationally designed and prefabricated polydimethylsiloxane (PDMS) stamps, which are reusable and independent of the substrate and functional coating, were used. To demonstrate the stamping technique, we used silicon wafer, copper, and aluminum substrates functionalized with a variety of hydrophobic chemistries including heptadecafluorodecyltrimethoxy-silane, octafluorocyclobutane, and slippery omniphobic covalently attached liquids. Condensation experiments and microgoniometric characterization demonstrated that the stamped surfaces have global hydrophobicity or superhydrophobicity with localized hydrophilicity (spots) enabled by local removal of the functional coating during stamping. Stamped surfaces with superhydrophobic backgrounds and hydrophilic spots demonstrated stable coalescence induced droplet jumping. Compared to conventional techniques, our stamping method has comparable prototyping cost with reduced manufacturing time scale and cost. Our work not only presents design guidelines for the development of scalable hybrid surfaces for the study of phase change phenomena, it develops a scalable and rapid stamping protocol for the cost-effective manufacture of next-generation hybrid wettability surfaces.

Merging 3D printing with electrospun biodegradable small-caliber vascular grafts immobilized with VEGF.

The major challenge of commercially available vascular substitutes comes from their limitations in terms of hydrophobic surface, which is hostile to cell growth. To date, tissue-engineered and synthetic grafts have not translated well to clinical trials when looking at small diameters. We conceptualized a cell-free structurally reinforced biodegradable vascular graft recapitulating the anisotropic feature of a native blood vessel. The nanofibrous scaffold is designed in such a way that it will gradually degrade systematically to yield a neo-vessel, facilitated by an immobilized bioactive molecule-vascular endothelial growth factor (VEGF). The nano-topographic cue of the device is capable of direct host cell infiltration. We evaluated the burst pressure, histology, hemocompatibility, compression test, and mechanical analysis of the new graft. The graft implanted into the carotid artery of a porcine model demonstrated a good patency rate as early as two week post-implantation. This graft reinforced design approach when employed in vascular tissue engineering might strongly influencing regenerative medicine.

Influence of Local Myocardial Infarction on Endothelial Function, Neointimal Progression, and Inflammation in Target and Non-Target Vascular Territories in a Porcine Model of Acute Myocardial Infarction.

BACKGROUND: Patients with acute myocardial infarction (AMI) have worse clinical outcomes than those with stable coronary artery disease despite revascularization. Non-culprit lesions of AMI also involve more adverse cardiovascular events. This study aimed to investigate the influence of AMI on endothelial function, neointimal progression, and inflammation in target and non-target vessels. METHODS: In castrated male pigs, AMI was induced by balloon occlusion and reperfusion into the left anterior descending artery (LAD). Everolimus-eluting stents (EES) were implanted in the LAD and left circumflex (LCX) artery 2 days after AMI induction. In the control group, EES were implanted in the LAD and LCX in a similar fashion without AMI induction. Endothelial function was assessed using acetylcholine infusion before enrollment, after the AMI or sham operation, and at 1 month follow-up. A histological examination was conducted 1 month after stenting. RESULTS: A total of 10 pigs implanted with 20 EES in the LAD and LCX were included. Significant paradoxical vasoconstriction was assessed after acetylcholine challenge in the AMI group compared with the control group. In the histologic analysis, the AMI group showed a larger neointimal area and larger area of stenosis than the control group after EES implantation. Peri-strut inflammation and fibrin formation were significant in the AMI group without differences in injury score. The non-target vessel of the AMI also showed similar findings to the target vessel compared with the control group. CONCLUSION: In the pig model, AMI events induced endothelial dysfunction, inflammation, and neointimal progression in the target and non-target vessels.

Kochia scoparia seed extract suppresses VEGF-induced angiogenesis via modulating VEGF receptor 2 and PI3K/AKT/mTOR pathways.

Context: Kochia scoparia (L.) Schrad (Amaranthaceae), known as a traditional medicine in China, Japan and Korea, is reported to have various biological activities. However, K. scoparia seed extract (KSE) functional roles on angiogenesis and prostate cancer inhibition have not been elucidated. Objective: This study elucidates the effects of KSE on vascular endothelial growth factor (VEGF)-induced angiogenesis in human umbilical vein endothelial cells (HUVECs) and inhibition of proliferation in prostate cancer cells. Materials and methods: HUVECs were treated with 10-20 µg/mL of KSE and 20-50 ng/mL of VEGF for 12-72 h. Anti-angiogenesis properties of KSE were determined by wound healing, trans-well, tube formation, rat aortic ring assay and western blotting. Prostate cancer and normal cells were incubated with 10-250 µg/mL of KSE for 24 h, and cell viability was measured by SRB assay. Phenolic compounds in KSE were analyzed using a HPLC-PDA system. Results: IC50 for cell viability of HUVECs, LNCaP, PC-3, RC-58T and RWPE-1 by KSE were 30.64, 89.25, 123.41, 141.62 and >250 µg/mL, respectively. Treatment with KSE (20 µg/mL) significantly suppressed VEGF-induced migration, invasion and capillary-like structure formation of HUVECs and microvessel sprouting from rat aortic rings. In addition, KSE down-regulated PI3K/AKT/mTOR levels and phosphorylation of VEGF receptor 2 in HUVECs. 3-OH-tyrosol (1.63 mg/g) and morin hydrate (0.17 mg/g) were identified in KSE. Conclusions: KSE inhibits angiogenesis in HUVECs as well as proliferation in human prostate cancer cells, suggesting KSE may be useful herbal medicine for preventing progression of prostate cancer and angiogenesis.

Magnetically Responsive Elastomer-Silicon Hybrid Surfaces for Fluid and Light Manipulation.

Stimuli-responsive surfaces with tunable fluidic and optical properties utilizing switchable surface topography are of significant interest for both scientific and engineering research. This work presents a surface involving silicon scales on a magnetically responsive elastomer micropillar array, which enables fluid and light manipulation. To integrate microfabricated silicon scales with ferromagnetic elastomer micropillars, transfer printing-based deterministic assembly is adopted. The functional properties of the surface are completely dictated by the scales with optimized lithographic patterns while the micropillar array is magnetically actuated with large-range, instantaneous, and reversible deformation. Multiple functions, such as tunable wetting, droplet manipulation, tunable optical transmission, and structural coloration, are designed, characterized, and analyzed by incorporating a wide range of scales (e.g., bare silicon, black silicon, photonic crystal scales) in both in-plane and out-of-plane configurations.

Anti-Inflammatory Effect of Gallic Acid-Eluting Stent in a Porcine Coronary Restenosis Model.

BACKGROUND: Gallic acid (3,4,5-trihydroxybenzoic acid) is a natural polyphenol and strong natural antioxidant found abundantly in red wine and green tea. The aim of this study was to examine the anti-inflammatory effect of a novel gallic acid-eluting stent in a porcine coronary restenosis model. METHODS: Fifteen pigs were randomized into three groups; in which a total of 30 coronary arteries (10 in each group) were implanted with gallic acid-eluting stents (GESs, n = 10), gallic acid and sirolimus-eluting stents (GSESs, n = 10), or sirolimus-eluting stents (SESs, n = 10). Histopathologic analysis was performed 28 days after stenting. RESULTS: There were no significant differences in injury score and fibrin score among the groups, however there were significant differences in the internal elastic lamina (4.0 ± 0.83 mm2 in GES vs. 3.0 ± 0.53 mm2 in GSES vs. 4.6 ± 1.43 mm2 in SES, p < 0.0001), lumen area (2.3 ± 0.49 mm2 in GES vs. 1.9 ± 0.67 mm2 in GSES vs. 2.9 ± 0.56 mm2 in SES, p < 0.0001), neointimal area (1.7 ± 0.63 mm2 in GES vs. 1.1 ± 0.28 mm2 in GSES vs. 1.7 ± 1.17 mm2 in SES, p < 0.05), and percent area of stenosis (42.4% ± 9.22% in GES vs. 38.2% ± 12.77% in GSES vs. 33.9% ± 15.64% in SES, p < 0.05). The inflammation score was significantly lower in the GES and GSES groups compared to that in the SES group [1.0 (range: 1.0 to 2.0) in GES vs. 1.0 (range: 1.0 to 1.0) in GSES vs. 1.5 (range: 1.0 to 3.0) in SES, p < 0.05]. CONCLUSIONS: The GES group had a greater percent area of stenosis than the SES group. Although gallic acid in the GES and GSES groups did not show a synergistic effect in suppressing neointimal hyperplasia, it resulted in greater inhibition of the inflammatory reaction in the porcine coronary restenosis model than in the SES group.

Raman spectrum identification based on the correlation score using the weighted segmental hit quality index.

In this paper, we consider a novel method for identification of Raman spectra recorded on different instruments with different wavelengths. Since the conventional hit quality index (HQI) is vulnerable to intensity variation, it needs intensity calibration or standardization for each spectrometer, which causes additional time consuming work. To simplify this process and enhance the identification performance, we propose a new scoring method which is defined as the weighted sum of the HQIs from segmented spectra by windowing. To show the effectiveness of the proposed method, the experiments were carried out with 10 kinds of chemicals with their spectra recorded on 3 different instruments with different laser wavelengths. According to the identification results with 14 033 chemicals, the proposed method identified all test chemicals without error, which indicates that the proposed method could be used as a promising alternative to the existing methods.

Optimization of Electropolishing on NiTi Alloy Stents and Its Influence on Corrosion Behavior.

Nitinol or NiTi alloys are well-known as an attractive biomedical material due to their unique properties such as the shape memory effect, super-elasticity and biocompatibility. These characteristics enable them to be best candidates for implant materials such as stent. One of the major factors that strongly affect the performance of nitinol stent is its unique surface properties. In this study, the influence of electropolishing on nitinol stents and its corrosion behavior were observed. Electropolishing is an effective method for surface treatment, which not only controls the surface state but also helps to produce uniform surface layers. Therefore, to improve the surface quality of nitinol stents, we conducted an electropolishing under various conditions from 30­40 V and 10­30 s as a post heat treatment for nitinol stent manufacturing process. In order to find the optimal surface state of NiTi stents, various electropolished samples were explored using various characterization techniques. Furthermore, the potentiodynamic polarization tests were also performed to determine the corrosion resistance. The electropolished nitinol stents under the condition of 40 V for 10 s exhibited the best corrosion performance as well as surface quality.

Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model.

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-L-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78% in BMS vs. 51.5 ± 12.20% in AES vs. 34.7 ± 7.23% in SES vs. 28.7 ± 7.30% in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0-1.0) in BMS vs. 1.0 (range 1.0-1.0) in AES vs. 2.0 (range 2.0-2.0) in SES vs. 2.0 (range 2.0-2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88% in BMS vs. 50.4 ± 14.87% in AES vs. 34.5 ± 7.22% in SES vs. 28.9 ± 7.22% in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.

A Wireless Pressure Sensor Integrated with a Biodegradable Polymer Stent for Biomedical Applications.

This paper describes the fabrication and characterization of a wireless pressure sensor for smart stent applications. The micromachined pressure sensor has an area of 3.13 × 3.16 mm² and is fabricated with a photosensitive SU-8 polymer. The wireless pressure sensor comprises a resonant circuit and can be used without the use of an internal power source. The capacitance variations caused by changes in the intravascular pressure shift the resonance frequency of the sensor. This change can be detected using an external antenna, thus enabling the measurement of the pressure changes inside a tube with a simple external circuit. The wireless pressure sensor is capable of measuring pressure from 0 mmHg to 230 mmHg, with a sensitivity of 0.043 MHz/mmHg. The biocompatibility of the pressure sensor was evaluated using cardiac cells isolated from neonatal rat ventricular myocytes. After inserting a metal stent integrated with the pressure sensor into a cardiovascular vessel of an animal, medical systems such as X-ray were employed to consistently monitor the condition of the blood vessel. No abnormality was found in the animal blood vessel for approximately one month. Furthermore, a biodegradable polymer (polycaprolactone) stent was fabricated with a 3D printer. The polymer stent exhibits better sensitivity degradation of the pressure sensor compared to the metal stent.

Effect of a novel peptide, WKYMVm- and sirolimus-coated stent on re-endothelialization and anti-restenosis.

The drug-eluting stent still has limitations such as thrombosis and inflammation. These limitations often occur in the absence of endothelialization. This study investigated the effects of WKYMVm- and sirolimus-coated stents on re-endothelialization and anti-restenosis. The WKYMVm peptide, specially synthesized for homing endothelial colony-forming cells, was coated onto a bare-metal stent with hyaluronic acid through a simple dip-coating method (designated HA-Pep). Thereafter, sirolimus was consecutively coated to onto the HA-Pep (designated Pep/SRL). The cellular response to stents by human umbilical-vein endothelial cells and vascular smooth-muscle cells was examined by XTT assay. Stents were implanted into rabbit iliac arteries, isolated 6 weeks post-implantation, and then subjected to histological analysis. The peptide was well attached to the surface of the stents and the sirolimus coating made the surface smooth. The release pattern for sirolimus was similar to that of commercial sirolimus-coated stents (57.2% within 7 days, with further release for up to 28 days). Endothelial-cell proliferation was enhanced in the HA-Pep group after 7 days of culture (38.2 ± 7.62%, compared with controls). On the other hand, the proliferation of smooth-muscle cells was inhibited in the Pep/SRL group after 7 days of culture (40.7 ± 6.71%, compared with controls). In an animal study, the restenosis rates for the Pep/SRL group (13.5 ± 4.50%) and commercial drug-eluting stents (Xience Prime™; 9.2 ± 7.20%) were lower than those for bare-metal stents (25.2 ± 4.52%) and HA-Pep stents (26.9 ± 3.88%). CD31 staining was incomplete for the bare-metal and Xience Prime™ groups. On the other hand, CD31 staining showed a consecutive linear pattern in the HA-Pep and Pep/SRL groups, suggesting that WKYMVm promotes endothelialization. These results indicate that the WKYMVm coating could promote endothelial healing, and consecutive coatings of WKYMVm and sirolimus onto bare-metal stents have a potential role in re-endothelialization and neointimal suppression.

Reliable femoral chronic total occlusion model using a thin biodegradable polymer coated copper stent in a porcine model.

Chronic total occlusions (CTOs) are common in patients with peripheral arterial disease (PAD). This study aimed to examine the feasibility and reliability of a CTO induced by a thin biodegradable polymer (polyglycolic acid) coated copper stent in a porcine femoral artery. Novel thin biodegradable polymer coated copper stents (9 mm long) were crimped on an angioplasty balloon (4.5 mm diameter × 12 mm length) and inserted into the femoral artery. Histopathologic analysis was performed 35 days after stenting. In five of six stented femoral arteries, severe in-stent restenosis and total occlusion with collateral circulation were observed without adverse effects such as acute stent thrombosis, leg necrosis, or death at 5 weeks. Fibrous tissue deposition, small vascular channels, calcification, and inflammatory cells were observed in hematoxylin-eosin, Carstair's, and von Kossa tissue stains; these characteristics were similar to pathological findings associated with CTOs in humans. The neointima volume measured by micro-computed tomography was 93.9 ± 4.04 % in the stented femoral arteries. CTOs were reliably induced by novel thin biodegradable polymer coated copper stents in porcine femoral arteries. Successful induction of CTOs may provide a practical understanding of their formation and application of an interventional device for CTO treatment.