RESUMEN
High nitrogen compounds find wide use in the development of new propellants and explosives as well as pharmaceutical chemistry as bioisosteres, bacterial stains, and antifungal agents. A class of underexplored high-nitrogen materials includes azidoximes and their 1-hydroxytetrazole isomers. Azidoximes possess an energetic azide group and are quite sensitive to impact, spark, and friction. Therefore, these materials are generated in situ and cyclized under mild acidic conditions to their 1-hydroxytetrazole isomers. Recently, we synthesized a novel 1,2,4-triazine-derived azidoxime; however, upon subjecting this material to established cyclization conditions, no reaction was observed, even after prolonged reaction times with heating. Additional 1,2,4-triazine-derived azidoximes also displayed a similar lack of reactivities. This observation led us to probe the reactivity of these materials with both a DFT investigation and crystallographically based electrostatic potential mapping. In all, the lack of reactivity toward cyclization was found to be due to an inability of 1,2,4-triazine-based azidoximes to isomerize into the reactive (E)-conformation, requiring an activation energy of 26.4 kcal mol-1.
RESUMEN
Two metal-free explosives, tetrazolo[1,5-b]pyridazine-containing molecules [6-azido-8-nitrotetrazolo[1,5-b]pyridazine-7-amine (3at) and 8-nitrotetrazolo[1,5-b]pyridazine-6,7-diamine (6)], were obtained via straightforward two-step synthetic routes from commercially available reagents. Compound 3at displays an excellent detonation performance (Dv = 8746 m s-1 and P = 31.5 GPa) that is superior to commercial primary explosives such as lead azide and diazodinitrophenol (DDNP). Compound 6 has superior thermal stability, remarkable insensitivity, and good detonation performance, strongly suggesting it as an acceptable secondary explosive. The initiating ability of compound 3at has been tested by detonating 500 mg of RDX with a surprisingly low minimum primary charge of 40 mg. The extraordinary initiating power surpasses conventional primary explosives, such as commercial DDNP (70 mg) and reported 6-nitro-7-azido-pyrazol[3,4-d][1,2,3]triazine-2-oxide (ICM-103) (60 mg). The outstanding detonation power of 3at contributes to its future prospects as a promising green primary explosive. In addition, the environmentally benign methodology for the synthesis of 3at effectively shortens the time from laboratory-scale research to practical applications.
RESUMEN
Exploring new energetic derivatives of 1,1-diamino-2,2-dinitroethylene (FOX-7) is still a key aspect in the field of energetic materials. However, so far most of the attention has been focused on modification of FOX-7 via different reaction strategies. Now we report the design of three new FOX-7-like compounds (3-5) where one nitro group in FOX-7 is replaced by a nitrogen-rich heterocyclic ring. Each of them is characterized by single-crystal X-ray crystallography. Electronic structures are studied through computational methods in comparison with FOX-7. In addition, the chemical reactivity of 3 was also investigated. Its hydroxylammonium (7), hydrazinium (8), and ammonium (9) salts were prepared, and the nitrate product (10) was also isolated. Compound 10 has a C-N bond length of 1.577 Å that is one of the longest values found for the C-NO2 bond. It was found that the incorporation of a tetrazole or triazole ring into the backbone of a conjugated nitroenamine does lead to a planar structure, which not only enhances the thermal stability but also improves the sensitivity of the product.
RESUMEN
Understanding the factors that affect explosive sensitivity is paramount to the safe handling and development of new explosives molecules. Erythritol tetranitrate (ETN) is an explosive that recently has attracted significant attention in the explosives community because of its ease of synthesis and physical properties. Herein, we report the synthesis of ETN derivatives using azide, nitramine, and nitrate ester functional groups. Impact, spark, and friction sensitivity measurements, computationally calculated explosive properties, and the crystal structure analysis of the ETN derivatives are reported. Mixing explosive functional groups led to changes in the explosive sensitivity, explosive performance as well as physical properties including melting point and physical state at room temperature. Overall, we have demonstrated that combining functional groups can enable the tuning of explosive and physical properties of a molecule. This tunability can potentially aid in the development of new explosives in which characteristics are varied to meet certain specifications.
RESUMEN
Metal nitrides are strong refractory ceramic materials known for applications in the coatings, catalysis, and semiconductor industries. Lanthanide nitrides are difficult to prepare in high purity and often require high temperatures and sophisticated equipment. In this work, we present an approach to the synthesis of high-purity f-element nitrides through the use of simple lanthanide salts and the nitrogen-rich ligand 5,5'-bis(1H-tetrazolyl)amine (H2BTA) to form lanthanide complexes of 5,5'-bis(tetrazolato)amine (BTA2-). We have demonstrated that, when dehydrated, these types of complexes undergo a self-sustained combustion reaction under an inert atmosphere to yield nanostructured f-element nitride foams for lanthanum and cerium. The synthesis, characterization, and single-crystal X-ray crystallography of the BTA2- complexes of lanthanum, cerium, praseodymium, neodymium, and europium are also discussed.
RESUMEN
Ammonium perchlorate (AP) is most often used as a practical solid rocket propellant because of its excellent performance. However, AP has many shortcomings, including instability, high negative enthalpy of formation, and claimed health and environmental issues resulting from its combustion products. The pursuit of highly dense, high-performance, and environmentally friendly oxidizers as solid propellants has long attracted scientists around the world. In this work, bis(3-nitro-1-(trinitromethyl)-1H-1,2,4-triazol-5-yl)methanone (3) was obtained from bis(3-nitro-1H-1,2,4-triazol-5-yl)methane (1) with chloroacetone followed by nitration. The structure of 3 was confirmed by elemental analysis and single-crystal X-ray diffraction. By introducing the carbonyl moiety, the density of 3 was increased to 1.945 g/cm3 and the decomposition temperature increased to 164 °C. Compound 3 is a green energetic oxidizer that has a positive oxygen balance (+8.7%), a high specific impulse (218 s), and an acceptable sensitivity (9 J, 240 N), making it a practical replacement for AP in solid rocket propellant formulations.
RESUMEN
A series of monosubstituted 1,2,4,5-tetrazine-based energetic materials was effectively synthesized and fully characterized with IR, multinuclear nuclear magnetic resonance (NMR), and elemental analyses. Heats of formation and detonation performances were determined using Gaussian 03 and EXPLO5 v6.01 programs, which show that 5 and 9 as secondary explosives have detonation velocities superior to the current secondary-explosive benchmark, triaminotrinitrobenzene (TATB). Importantly, compounds 2, 5, and 9 were first characterized with single-crystal X-ray diffraction and Hirshfeld surface calculations, and some intermolecular weak hydrogen bonds (Het-H-N/O) among these compounds illustrate the relationship between these weak interactions and excellent sensitivity of energetic materials. This design method for next-generation energetic materials by incorporating intermolecular weak hydrogen bonds may be of future importance.
RESUMEN
Nitroamino-functionalized 1,2,4-triazolo[4,3- b][1,2,4,5]tetrazine (1), when combined with intermolecular hydrogen bonds (HBs) and strong noncovalent interactions between layers, results, for example, in an interlayer distance of 2.9 Å for dihydroxylammonium 3,6-dinitramino-1,2,4-triazolo[4,3- b][1,2,4,5]tetrazine (2c) with a packing coefficient of 0.805. For dihydroxylammonium 6,6'-dinitramino-3,3'-azo-1,2,4-triazolo[4,3- b][1,2,4,5]tetrazine (3b), two fused rings are linked by an azo group, which expands the conjugated system resulting in an even shorter interlayer distance of 2.7 Å and a higher packing coefficient of 0.807. These values appear to be the shortest interlayer distances and the highest packing coefficients reported for tetrazine energetic materials. With high packing coefficients, both possess high densities of 1.92 g cm-3 and 1.99 g cm-3 at 293 K, respectively. Compared with its precursor, the hydroxylammonium moiety serves as a buffer chain (H-N-O-H), connecting the anion and cation through hydrogen bonds, giving rise to more favorable stacking, and resulting in higher density and lower sensitivity. The sensitivities of all the hydroxylammonium salts are lower than that of their neutral precursors, such as compound 2 (3 J, >5 N) and compound 2c (25 J, 360 N). The detonation properties of 2c (detonation velocity vD = 9712 m s-1 and detonation pressure P = 43 GPa) and 3b (vD = 10233 m s-1; P = 49 GPa) exceed those of present high explosive benchmarks, such as octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexanitrohexaazaisowurzitane (CL-20). The molecular structures of several of these new energetic materials are confirmed by single-crystal X-ray diffraction measurements. Using calculated and experimental results, the fused ring with a planar large π-conjugated system results in a compromise between desirable stabilities and high detonation properties, thus enhancing future utilization in the design of energetic materials.
RESUMEN
The exploitation of C-C activation to facilitate chemical reactions is well-known in organic chemistry. Traditional strategies in homogeneous media rely upon catalyst-activated or metal-mediated C-C bonds leading to the design of new processes for applications in organic chemistry. However, activation of a C-C bond, compared with C-H bond activation, is a more challenging process and an underdeveloped area because thermodynamics does not favor insertion into a C-C bond in solution. Carbon-carbon bond cleavage through loss of an oxime moiety has not been reported. In this paper, a new observation of self-coupling via C-C bond cleavage with concomitant loss of oxime in the absence of metals (either metal-complex mediation or catalysis) results in dihydroxylammonium 5,5-bistetrazole-1,10-diolate (TKX-50) as well as N, N'-([3,3'-bi(1,2,4-oxadiazole)]-5,5'-diyl)dinitramine, a potential candidate for a new generation of energetic materials.
RESUMEN
A family of 3,3'-bipyrazole-based energetic compounds having C-NO2 /N-NO2 functionalities was synthesized by using various nitrating conditions. These nitro derivatives of bipyrazole are significantly more dense and energetic compared to the corresponding nitropyrazole analogues while maintaining the desired thermal stability and sensitivity. Depending on the number and nature of energetic nitro groups (C-NO2 /N-NO2 ), different classes of energetic materials, such as green primary explosives, high-performance secondary explosives and heat-resistant explosives, were obtained. All the compounds were thoroughly characterized by IR, NMR [1 H, 13 C{1 H}, 15 N], elemental analysis, and differential scanning calorimetry (DSC). Four were also structurally characterized with single-crystal X-ray diffraction studies. Heats of formation and detonation performance were calculated using Gaussianâ 03 and EXPLO5 v6.01 programs, respectively.
RESUMEN
Biohazards and chemical hazards as well as radioactive hazards have always been a threat to human health. The search for solutions to these problems is an ongoing worldwide effort. In order to control biohazards by chemical methods, a synthetically useful fused tricyclic iodine-rich compound, 2,6-diiodo-3,5-dinitro-4,9-dihydrodipyrazolo [1,5- a:5',1'- d][1,3,5]triazine (5), with good detonation performance was synthesized, characterized, and its properties determined. This compound which acts as an agent defeat weapon has been shown to destroy certain microorganisms effectively by releasing iodine after undergoing decomposition or combustion. The small iodine residues remaining will not be deleterious to human life after 1 month.
Asunto(s)
Desinfectantes/farmacología , Sustancias Explosivas/farmacología , Yodo/química , Triazinas/farmacología , Desinfectantes/síntesis química , Desinfectantes/química , Escherichia coli/efectos de los fármacos , Sustancias Explosivas/síntesis química , Sustancias Explosivas/química , Calefacción , Staphylococcus aureus/efectos de los fármacos , Triazinas/síntesis química , Triazinas/químicaRESUMEN
Gem-trinitromethyl groups were introduced into a 1,3,4-oxadiazole ring to give the first example of a bifunctionalized single five-membered ring with six nitro groups. 2,5-Bis(trinitromethyl)-1,3,4-oxadiazole (12) has a high calculated crystal density of 2.007 g cm-3 at 150 K (1.941 g cm-3 at 293 K) and a very high positive oxygen balance (39.12%), which makes it a strong candidate as a high energy dense oxidizer. The dihydroxylammonium and dihydrazinium salts of bis(trinitromethyl)-1,3,4-oxadiazole (5 and 6) exhibit excellent calculated detonation properties (5, vD = 9266 m s-1, P = 38.9 GPa; 6, vD = 8900 m s-1, P = 36.3 GPa) and acceptable impact sensitivities (5 20 J, 6 19 J), which are superior to those of RDX (7.4 J) and HMX (7.4 J). Such attractive features support the application potential of the gem-polynitromethyl group in the design of advanced energetic materials. Surprisingly, 2,5-bis(trinitromethyl)-1,3,4-oxadiazole (12) is more thermally stable and less sensitive than its bis(dinitromethyl) analogue, 8.
RESUMEN
Properties of energetic compounds obtained by linking energetic pyrazoles to tetrazoles by means of N-methylene-C bridges can be fine-tuned. Reactions of pyrazole derivatives with chloroacetonitrile followed by conversion of the cyano group to tetrazole using click reactions in the presence of zinc chloride result in asymmetric N-methylene-C bridged azole-based energetic compounds. All the compounds were thoroughly characterized by IR and NMR [1 H, 13 Câ {1 H}, 15 N] spectroscopy, elemental analysis, and differential scanning calorimetry (DSC), and for two compounds, further supported by single-crystal X-ray diffraction studies. Heats of formation and detonation performances were calculated using Gaussianâ 03 and EXPLO5 v6.01 programs, respectively. Initial studies show that this new approach is promising for synthesizing less sensitive energetic compounds with fine-tuned properties.
RESUMEN
N-Cyanoimidate (1) with hydroxylamine hydrochloride in the presence of triethylamine gives different products (2 a or 2 b) as a function of the sequence of reactant addition. Further oxidation/nitration/decarboxylation/acidification reactions of 2 a/2 b generate dinitromethyl-3(5)-1,2,4-oxadiazole derivatives, including a surprising energetic compound with high oxygen balance, 3-(dinitromethyl)-1,2,4-oxadiazol-5-one (5) as well as 5,5'-dinitromethyl-3,3'-azo-1,2,4-oxadiazole (9). Some salts of 5 and 9 as precursors were also prepared. All were fully characterized using multinuclear NMR and IR spectroscopy, and elemental analyses as well as low-temperature single-crystal X-ray diffraction for 4, 5, 7 and 8. In addition, their properties (thermal stability, detonation performance and sensitivity to impact and friction) were investigated. Among them, 5 and 8 show promising detonation performance as energetic materials.
RESUMEN
Achieving an energetic compound, which exhibits high performance and insensitivity, is important in the field of energetic materials and remains a major challenge. Herein, we found that oxidation of 4,7-diaminopyridazino[4,5-c]furoxanâ (5) with a mixture of 50 % hydrogen peroxide and trifluoroacetic anhydride gave 6-amino-7-nitro-[1,2,5]oxadiazolo[3,4-c]pyridazineâ (7) and its N-oxide derivativeâ (8). The oxidation of 5 with hypofluorous acid (HOF) was also studied. Compoundâ 8 displayed an energetic performance compared to triaminotrinitrobenzene (TATB) and insensitive properties (impact sensitivity (IS) 36â J and friction sensitivity (FS)>360â N). Such excellent properties make 8 attractive for high-performance applications, in which insensitivity is important.
RESUMEN
Since highly nitrated nitrogen-rich heterocycles are important motifs in high energy density materials, extensive studies for the development of such novel molecules have been underway. A highly energetic moiety, 3-dinitromethyl-5-nitramino-1,2,4-triazole, which consists of a triazole ring, and nitramino and dinitromethyl groups, has been designed and synthesized. By pairing with nitrogen-rich cations, several ionic derivatives were obtained. Theoretical and experimental studies show that the hydroxylammonium salt (7) is highly dense, and has excellent detonation performance with acceptable thermal stablity and sensitivities, which are superior to those of RDX.
RESUMEN
Trianionic energetic salts based on one nitromethylene and two dinitromethyl anions were designed and synthesized. Interestingly, the unstable dinitromethylene group of diethyl 2,2'-((dinitromethylene)bis(1,3,4-oxadiazole-5,2-diyl))bis(2,2-dinitroacetate) (2) was changed to a mononitromethylene group by an aminolysis reaction to form triammonium ((nitromethanidylene)bis(1,3,4-oxadiazole-5,2-diyl))bis(dinitromethanide) (3), whereas in (dinitrobis(5-(trinitromethyl)-1,3,4-oxadiazol-2-yl)methan) 8 it was hydrolyzed to a carbonyl group resulting in (bis(5-(trinitromethyl)-1,3,4-oxadiazol-2-yl)methanone) 9. All the new compounds were fully characterized by infrared, multinuclear NMR spectra, and elemental analysis. The structures of triammonium ((nitromethanidylene)bis(1,3,4-oxadiazole-5,2-diyl))bis(dinitromethanide) dihydrate (3â 2 H2 O) and bis(2-dinitromethyl-1,3,4-oxadiazole-5-yl)methanone (9) were further confirmed by single-crystal X-ray diffraction analysis. Based on their different physical and detonation properties, some of the energetic salts were found to exhibit good energetic performance and low sensitivity.
RESUMEN
A fused-ring conjugated energetic molecule, 4-amino-3,7-dinitro-[1,2,4]triazolo[5,1-c] [1,2,4]triazine (TTX), has been synthesized in good yield in a two-step process starting from the known 5-amino-3-nitro-1H-1,2,4-triazole (ANTA). Characterization of TTX shows that it possesses energetic properties approaching those of 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), but with a higher thermal stability and lower sensitivity towards impact and friction.
RESUMEN
The reaction of 3,4-dinitropyrazole, 5-nitrotetrazole, or 4-nitro-1,2,3-triazole with 1,2,4,5-tetrazines substituted with 3,5-dimethylpyrazolyl (dmp) groups results in energetic cocrystals after 1 minute of reflux and cooling to room temperature in yields of 89-92 %. Hydrogen-bonding between the dmp group to the N-H of the energetic heterocycles are the predominant interaction that stabilizes the new cocrystals. Each cocrystal packs in a different lattice structure and the cocrystals with sheet-like and herring-bone crystal packing orientations are less sensitive than the cocrystal with the interlocked structure. Electrostatic potential mapping helps rationalize why dmp-substituted tetrazines readily form cocrystals, whereas more electron-deficient pyrazolyl tetrazines do not. The calculated energetic performance of the new cocrystals approaches that of 2,4,6-trinitrotoluene (TNT) and importantly, these materials will aid in the rational design of new cocrystalline energetic materials.
RESUMEN
Sodium salts of iodine-rich pyrazole and imidazole with 1-(2-bromoethyl)-5-aminotetrazole are useful precursors for energetic N,N'-ethylene-bridged polyiodoazoles. Compounds 1-3 were characterized with IR, and 1 H and 13 Câ NMR spectroscopy as well as elemental analyses. The molecular structures of 1 and 2 were confirmed by using single crystal X-ray diffraction. Heats of formation were calculated using Gaussianâ 03 and detonation properties and biocidal efficiency were calculated with CHEETAHâ 7. The decomposition products of 1-3 destroy microbes more effectively than some previously reported biocides since the thermal decomposition occurs at below 400 °C without addition of oxidizer or combustion adjuvant.