Novel Strategy for Non-Aqueous Bioconjugation of Substituted Phenyl-1,2,4-triazole-3,5-dione Analogues.

A novel 4-[4-(pentafluoro-λ6-sulfanyl)phenyl]-1,2,4-triazole-3,5-dione (5a) was synthesised as a potential [18F]radio-prosthetic group for radiolabelling peptides and proteins via selective bioconjugation with the phenolic side chains of tyrosine residues. Preliminary conjugation tests revealed the rapid hydrolysis of 5a under semi-aqueous conditions; these results led to further investigation into the electronic substituent effects of PTAD derivatives and corresponding hydrolytic stabilities. Five derivatives of 5a with para substituents of varying electron donating and withdrawing effects were synthesised for the investigation. The bioconjugation of these derivatives with model tyrosine was monitored in both aqueous and organic media in the presence of a variety of catalysts. From these investigations, we have found HFIP to be an effective catalyst when used in tandem with DCM as a solvent to give PTAD-tyrosine conjugate products (6a-f) in satisfactory to good yields (54-79%), whereas analogous reactions performed in acetonitrile were unsuccessful. The discovery of this system has allowed for the successful conjugation of electron-deficient PTAD derivatives to tyrosine, which would otherwise be unachievable under aqueous reaction conditions. The inclusion of these electron-deficient, fluorinated PTAD derivatives for use in the PTAD-tyrosine conjugation will hopefully broaden their applicability within fields such as 19F-MRI and PET imaging.

Fluorine-18 Radiolabelling and Photophysical Characteristics of Multimodal PET-Fluorescence Molecular Probes.

Positron emission tomography (PET)-fluorescence imaging is an emerging field of multimodality imaging seeking to attain synergy between the two techniques. The probes employed in PET-fluorescence imaging incorporate both a fluorophore and radioisotope which enable complementary information to be obtained from both imaging techniques via the administration of a single agent. Fluorine-18 is the most commonly used radioisotope in PET imaging and consequently many novel attempts to radiofluorinate various fluorophores have transpired over the past decade. In this Minireview, the most relevant fluorine-18 labelled PET-fluorescence probes have been classified into four groups as per the implemented fluorophore: 1) boron-dipyrromethene (BODIPY) dyes, 2) cyanine dyes, 3) alternative organic fluorophores and 4) organometallics, such as quantum dots (QDs) and rhenium complexes. The biological, radiochemical and photophysical properties of each probe have been systematically compared to aid future endeavours in PET-fluorescence chemistry.

Open-field PET: Simultaneous brain functional imaging and behavioural response measurements in freely moving small animals.

A comprehensive understanding of how the brain responds to a changing environment requires techniques capable of recording functional outputs at the whole-brain level in response to external stimuli. Positron emission tomography (PET) is an exquisitely sensitive technique for imaging brain function but the need for anaesthesia to avoid motion artefacts precludes concurrent behavioural response studies. Here, we report a technique that combines motion-compensated PET with a robotically-controlled animal enclosure to enable simultaneous brain imaging and behavioural recordings in unrestrained small animals. The technique was used to measure in vivo displacement of [11C]raclopride from dopamine D2 receptors (D2R) concurrently with changes in the behaviour of awake, freely moving rats following administration of unlabelled raclopride or amphetamine. The timing and magnitude of [11C]raclopride displacement from D2R were reliably estimated and, in the case of amphetamine, these changes coincided with a marked increase in stereotyped behaviours and hyper-locomotion. The technique, therefore, allows simultaneous measurement of changes in brain function and behavioural responses to external stimuli in conscious unrestrained animals, giving rise to important applications in behavioural neuroscience.

[18 F]Ethenesulfonyl Fluoride as a Practical Radiofluoride Relay Reagent.

Fluorine-18 is the most utilized radioisotope in positron emission tomography (PET), but the wide application of fluorine-18 radiopharmaceuticals is hindered by its challenging labelling conditions. As such, many potentially important radiotracers remain underutilized. Herein, we describe the use of [18 F]ethenesulfonyl fluoride (ESF) as a novel radiofluoride relay reagent that allows radiofluorination reactions to be performed in minimally equipped satellite nuclear medicine centres. [18 F]ESF has a simple and reliable production route and can be stored on inert cartridges. The cartridges can then be shipped remotely and the trapped [18 F]ESF can be liberated by simple solvent elution. We have tested 18 radiolabelling precursors, inclusive of model and clinically used structures, and most precursors have demonstrated comparable radiofluorination efficiencies to those obtained using a conventionally dried [18 F]fluoride source.

Perspectives on the Use of Liquid Extraction for Radioisotope Purification.

The reliable and efficient production of radioisotopes for diagnosis and therapy is becoming an increasingly important capability, due to their demonstrated utility in Nuclear Medicine applications. Starting from the first processes involving the separation of 99mTc from irradiated materials, several methods and concepts have been developed to selectively extract the radioisotopes of interest. Even though the initial methods were based on liquid-liquid extraction (LLE) approaches, the perceived difficulty in automating such processes has slowly moved the focus towards resin separation methods, whose basic chemical principles are often similar to the LLE ones in terms of chelators and phases. However, the emerging field of flow chemistry allows LLE to be easily automated and operated in a continuous manner, resulting in an even improved efficiency and reliability. In this contribution, we will outline the fundamentals of LLE processes and their translation into flow-based apparatuses; in addition, we will provide examples of radioisotope separations that have been achieved using LLE methods. This article is intended to offer insights about the future potential of LLE to purify medically relevant radioisotopes.

Synthesis, bioconjugation and stability studies of [18 F]ethenesulfonyl fluoride.

Fluorine-18 labelled prosthetic groups (PGs) are often necessary for radiolabelling sensitive biological molecules such as peptides and proteins. Several shortcomings, however, often diminish the final yield of radiotracer. In an attempt to provide higher yielding and operationally efficient tools for radiolabelling biological molecules, we describe herein the first radiochemical synthesis of [18 F]ethenesulfonyl fluoride ([18 F]ESF) and its Michael conjugation with amino acids and proteins. The synthesis of [18 F]ESF was optimised using a microfluidic reactor under both carrier-added (c.a.) and no-carrier-added (n.c.a.) conditions, affording, in a straightforward procedure, 30-50% radiochemical yield (RCY) for c.a. [18 F]ESF and 60-70% RCY for n.c.a. [18 F]ESF. The conjugation reactions were performed at room temperature using 10 mg/mL precursor in aqueous/organic solvent mixtures for 15 min. The radiochemical stability of the final conjugates was evaluated in injectable formulation and rat serum, and resulted strongly substrate dependent and generally poor in rat serum. Therefore, in this work we have optimised a straightforward synthesis of [18 F]ESF and its Michael conjugation with model compounds, without requiring chromatographic purification. However, given the general low stability of the final products, further studies will be required for improving conjugate stability, before assessing the use of this PG for PET imaging.

A Fluorine-18 Radiolabeling Method Enabled by Rhenium(I) Complexation Circumvents the Requirement of Anhydrous Conditions.

Azeotropic distillation is typically required to achieve fluorine-18 radiolabeling during the production of positron emission tomography (PET) imaging agents. However, this time-consuming process also limits fluorine-18 incorporation, due to radioactive decay of the isotope and its adsorption to the drying vessel. In addressing these limitations, the fluorine-18 radiolabeling of one model rhenium(I) complex is reported here, which is significantly improved under conditions that do not require azeotropic drying. This work could open a route towards the investigation of a simplified metal-mediated late-stage radiofluorination method, which would expand upon the accessibility of new PET and PET-optical probes.

Design, synthesis and preliminary evaluation of (18)F-labelled 1,8-naphthyridin- and quinolin-2-one-3-carboxamide derivatives for PET imaging of CB2 cannabinoid receptor.

In the present work, we report the synthesis of new aryliodonium salts used as precursors of single-stage nucleophilic (18)F radiofluorination. The corresponding unlabelled fluorinated derivatives showed to be CB2 cannabinoid receptor specific ligands, with Ki values in the low nanomolar range and high CB2/CB1 selectivity. The radiolabelled compound [(18)F]CB91, was successfully formulated for in vivo administration, and its preliminary biodistribution was assessed with microPET/CT. This tracer presented a reasonable in vivo stability and a preferential extraction in the tissues that constitutionally express CB2 cannabinoid receptor. The results obtained indicate [(18)F]CB91 as a possible candidate marker of CB2 cannabinoid receptor distribution. This study would open the way to further validation of this tracer for assessing pathologies for which the expression of this receptor is modified.

Proof of concept of a new plasma complement Factor H from waste plasma fraction.

Introduction: Complement factor H (FH) is a major regulator of the complement alternative pathway, its mutations predispose to an uncontrolled activation in the kidney and on blood cells and to secondary C3 deficiency. Plasma exchange has been used to correct for FH deficiency and although the therapeutic potential of purified FH has been suggested by in vivo experiments in animal models, a clinical approved FH concentrate is not yet available. We aimed to develop a purification process of FH from a waste fraction rather than whole plasma allowing a more efficient and ethical use of blood and plasma donations. Methods: Waste fractions from industrial plasma fractionation (pooled human plasma) were analyzed for FH content by ELISA. FH was purified from unused fraction III and its decay acceleration, cofactor, and C3 binding capacity were characterized in vitro. Biodistribution was assessed by high-resolution dynamic PET imaging. Finally, the efficacy of the purified FH preparation was tested in the mouse model of C3 glomerulopathy (Cfh-/- mice). Results: Our purification method resulted in a high yield of highly purified (92,07%), pathogen-safe FH. FH concentrate is intact and fully functional as demonstrated by in vitro functional assays. The biodistribution revealed lower renal and liver clearance of human FH in Cfh-/- mice than in wt mice. Treatment of Cfh-/- mice documented its efficacy in limiting C3 activation and promoting the clearance of C3 glomerular deposits. Conclusion: We developed an efficient and economical system for purifying intact and functional FH, starting from waste material of industrial plasma fractionation. The FH concentrate could therefore constitute possible treatments options of patients with C3 glomerulopathy, particularly for those with FH deficiency, but also for patients with other diseases associated with alternative pathway activation.

Raclopride-Molecularly Imprinted Polymers: A Promising Technology for Selective [11C]Raclopride Purification.

In this work, we developed a novel approach to purify [11C]Raclopride ([11C]RAC), an important positron emission tomography radiotracer, based on tailored shape-recognition polymers, with the aim to substitute single-pass HPLC purification with an in-flow trap & release process. Molecular imprinting technology (MIT) applied to solid phase extraction (MISPE) was investigated to develop a setting able to selectively extract [11C]RAC in a mixture containing a high amount of its precursor, (S)-O-Des-Methyl-Raclopride (DM-RAC). Two imprinted polymers selective for unlabeled RAC and DM-RAC were synthesized through a radical polymerization at 65 °C using methacrylic acid and trimethylolpropane trimethacrylate in the presence of template molecule (RAC or DM-RAC). The prepared polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy and tested in MISPE experiments. The polymers were used in testing conditions, revealing a high retention capacity of RAC-MISPE to retain RAC either in the presence of similar concentrations of RAC and DM-RAC precursor (96.9%, RSD 6.6%) and in the presence of a large excess of precursor (90%, RSD 4.6%) in the loading solution. Starting from these promising results, preliminary studies for selective purification of [11C]Raclopride using this RAC-MISPE were performed and, while generally confirming the selectivity capacity of the polymer, revealed challenging applicability to the current synthetic process, mainly due to high backpressures and long elution times.

[Translational perspectives in molecular imaging: methodological evolution and nanostructured materials]. / Prospettive traslazionali dell'imaging molecolare: evoluzione delle metodiche e materiali nanostrutturati.

Molecular imaging techniques play an increasingly important role in the deep understanding of pathologies. They represent a direct spotlight on the molecular correlates of diseases and can be used for assessing earlier the state of health and decide the treatment of each patient in a personalized way. This article will show the basis of several imaging techniques, and give examples on the application and development of molecular imaging tracers. Particular attention will be pointed on the use of nanostructured materials, that has a promising role in the finding of new tracers, on the use of novel methodological approaches (multimodality, theranostics, pretargeting) and on the possibility of translational applications.

Kinetic isotope effects and synthetic strategies for deuterated carbon-11 and fluorine-18 labelled PET radiopharmaceuticals.

The deuterium labelling of pharmaceuticals is a useful strategy for altering pharmacokinetic properties, particularly for improving metabolic resistance. The pharmacological effects of such metabolites are often assumed to be negligible during standard drug discovery and are factored in later at the clinical phases of development, where the risks and benefits of the treatment and side-effects can be wholly assessed. This paradigm does not translate to the discovery of radiopharmaceuticals, however, as the confounding effects of radiometabolites can inevitably show in preliminary positron emission tomography (PET) scans and thus complicate interpretation. Consequently, the formation of radiometabolites is crucial to take into consideration, compared to non-radioactive metabolites, and the application of deuterium labelling is a particularly attractive approach to minimise radiometabolite formation. Herein, we provide a comprehensive overview of the deuterated carbon-11 and fluorine-18 radiopharmaceuticals employed in PET imaging experiments. Specifically, we explore six categories of deuterated radiopharmaceuticals used to investigate the activities of monoamine oxygenase (MAO), choline, translocator protein (TSPO), vesicular monoamine transporter 2 (VMAT2), neurotransmission and the diagnosis of Alzheimer's disease; from which we derive four prominent deuteration strategies giving rise to a kinetic isotope effect (KIE) for reducing the rate of metabolism. Synthetic approaches for over thirty of these deuterated radiopharmaceuticals are discussed from the perspective of deuterium and radioisotope incorporation, alongside an evaluation of the deuterium labelling and radiolabelling efficacies across these independent studies. Clinical and manufacturing implications are also discussed to provide a more comprehensive overview of how deuterated radiopharmaceuticals may be introduced to routine practice.

Rhenium(i) complexation-dissociation strategy for synthesising fluorine-18 labelled pyridine bidentate radiotracers.

A novel fluorine-18 method employing rhenium(i) mediation is described herein. The method was found to afford moderate to high radiochemical yields of labelled rhenium(i) complexes. Subsequent thermal dissociation of the complexes enabled the radiosynthesis of fluorine-18 labelled pyridine bidentate structures which could not be radiofluorinated hitherto. This rhenium(i) complexation-dissociation strategy was further applied to the radiosynthesis of [18F]CABS13, an Alzheimer's disease imaging agent, alongside other 2,2'-bipyridine, 1,10-phenanthroline and 8-hydroxyquinoline labelled radiotracers. Computational modelling of the reaction mechanism suggests that the efficiency of rhenium(i) activation may be attributed to both an electron withdrawal effect by the metal center and the formation of an acyl fluoride intermediate which anchors the fluoride subsequent to nucleophilic addition.

In vivo [64Cu]CuCl2 PET imaging reveals activity of Dextran-Catechin on tumor copper homeostasis.

Given the strong clinical evidence that copper levels are significantly elevated in a wide spectrum of tumors, copper homeostasis is considered as an emerging target for anticancer drug design. Monitoring copper levels in vivo is therefore of paramount importance when assessing the efficacy of copper-targeting drugs. Herein, we investigated the activity of the copper-targeting compound Dextran-Catechin by developing a [64Cu]CuCl2 PET imaging protocol to monitor its effect on copper homeostasis in tumors. Methods: Protein expression of copper transporter 1 (CTR1) in tissue microarrays representing 90 neuroblastoma patient tumors was assessed by immunohistochemistry. Western blotting analysis was used to study the effect of Dextran-Catechin on the expression of CTR1 in neuroblastoma cell lines and in tumors. A preclinical human neuroblastoma xenograft model was used to study anticancer activity of Dextran-Catechin in vivo and its effect on tumor copper homeostasis. PET imaging with [64Cu]CuCl2 was performed in such preclinical neuroblastoma model to monitor alteration of copper levels in tumors during treatment. Results: CTR1 protein was found to be highly expressed in patient neuroblastoma tumors by immunohistochemistry. Treatment of neuroblastoma cell lines with Dextran-Catechin resulted in decreased levels of glutathione and in downregulation of CTR1 expression, which caused a significant decrease of intracellular copper. No changes in CTR1 expression was observed in normal human astrocytes after Dextran-Catechin treatment. In vivo studies and PET imaging analysis using the neuroblastoma preclinical model revealed elevated [64Cu]CuCl2 retention in the tumor mass. Following treatment with Dextran-Catechin, there was a significant reduction in radioactive uptake, as well as reduced tumor growth. Ex vivo analysis of tumors collected from Dextran-Catechin treated mice confirmed the reduced levels of CTR1. Interestingly, copper levels in blood were not affected by treatment, demonstrating potential tumor specificity of Dextran-Catechin activity. Conclusion: Dextran-Catechin mediates its activity by lowering CTR1 and intracellular copper levels in tumors. This finding further reveals a potential therapeutic strategy for targeting copper-dependent cancers and presents a novel PET imaging method to assess patient response to copper-targeting anticancer treatments.

Dose-on-demand production of diverse 18F-radiotracers for preclinical applications using a continuous flow microfluidic system.

INTRODUCTION: The production of 18F-radiotracers using continuous flow microfluidics is under-utilized due to perceived equipment limitations. We describe the dose-on-demand principle, whereby the back-to-back production of multiple, diverse 18F-radiotracers can be prepared on the same day, on the same microfluidic system using the same batch of [18F]fluoride, the same microreactor, the same HPLC column and SPE cartridge to obtain a useful production yield. METHODS: [18F]MEL050, [18F]Fallypride and [18F]PBR111 were radiolabeled with [18F]fluoride using the Advion NanoTek Microfluidic Synthesis System. The outlet of the microreactor was connected to an automated HPLC injector and following the collection of the product, SPE reformulation produced the 18F-radiotracer in <10% ethanolic saline. A thorough automated cleaning procedure was implemented to ensure no cross-contamination between radiotracer synthesis. RESULTS: The complete productions for [18F]MEL050 and [18F]Fallypride were performed at total flow rates of 20µL/min, resulting in 40±13% and 25±13% RCY respectively. [18F]PBR111 was performed at 200µL/min to obtain 27±8% RCY. Molar activities for each 18F-radiotracer were >100GBq/µmol and radiochemical purities were >97%, implying that the cleaning procedure was effective. CONCLUSIONS: Using the same initial solution of [18F]fluoride, microreactor, HPLC column and SPE cartridge, three diverse 18F-radiotracers could be produced in yields sufficient for preclinical studies in a back-to-back fashion using a microfluidic system with no detectable cross-contamination.

Sulfur - fluorine bond in PET radiochemistry.

The importance of the sulfur-fluorine bond is starting to increase in modern medicinal chemistry literature. This is due to a better understanding of the stability and reactivity of this moiety depending on the various oxidation states of sulfur. Furthermore, several commercial reagents used for mild and selective fluorination of organic molecules are based on the known reactivity of S-F groups. In this review, we will show how these examples are translating into the 18F field, both for use as stable tags in finished radiopharmaceuticals and as mildly reactive fluoride-relay intermediates. Finally, we also discuss current opportunities where examples of non-radioactive S-F applications/chemistry may be translated into future 18F radiochemistry applications.

Optimisation of [11C]Raclopride production using a Synthra GPextent system.

The dopamine D2 receptor radiotracer [(11)C]Raclopride is used extensively in clinical and preclinical imaging. Currently, a wide range of methods to produce [(11)C]Raclopride have been developed using traditional vessel reactions as well as cartridge or captive solvent. This work reports the optimisation of the production of [(11)C]Raclopride using a Synthra GPextent, comparing various methods. With optimised conditions, we were able to obtain 4±2% (ndc) yield of [(11)C]Raclopride (100 GBq [(11)C]CO2, n = 42) in 25 min. The radiochemical purity was >95% with specific activities of 135±41 MBq/nmol at end of synthesis.

Hardware and software modifications on the Advion NanoTek microfluidic platform to extend flexibility for radiochemical synthesis.

Microfluidic systems are currently receiving a lot of attention in the PET radiochemistry field, due to their demonstrated ability to obtain higher incorporation yields with reduced total processing time and using a decreased amount of precursors. The Advion NanoTek LF was the first commercial microfluidic system available for radiochemistry that allows basic parameter optimization to be performed. In this paper we report hardware and software modifications that would allow better performing procedures, higher product throughput and flexibility to utilize the system. In particular, HPLC purification and SPE formulation have been fully integrated.

Optimization of nucleophilic ¹8F radiofluorinations using a microfluidic reaction approach.

Microfluidic techniques are increasingly being used to synthesize positron-emitting radiopharmaceuticals. Several reports demonstrate higher incorporation yields, with shorter reaction times and reduced amounts of reagents compared with traditional vessel-based techniques. Microfluidic techniques, therefore, have tremendous potential for allowing rapid and cost-effective optimization of new radiotracers. This protocol describes the implementation of a suitable microfluidic process to optimize classical (18)F radiofluorination reactions by rationalizing the time and reagents used. Reaction optimization varies depending on the systems used, and it typically involves 5-10 experimental days of up to 4 h of sample collection and analysis. In particular, the protocol allows optimization of the key fluidic parameters in the first tier of experiments: reaction temperature, residence time and reagent ratio. Other parameters, such as solvent, activating agent and precursor concentration need to be stated before the experimental runs. Once the optimal set of parameters is found, repeatability and scalability are also tested in the second tier of experiments. This protocol allows the standardization of a microfluidic methodology that could be applied in any radiochemistry laboratory, in order to enable rapid and efficient radiosynthesis of new and existing [(18)F]-radiotracers. Here we show how this method can be applied to the radiofluorination optimization of [(18)F]-MEL050, a melanoma tumor imaging agent. This approach, if integrated into a good manufacturing practice (GMP) framework, could result in the reduction of materials and the time required to bring new radiotracers toward preclinical and clinical applications.

Microfluidics in radiopharmaceutical chemistry.

The increased demand for molecular imaging tracers useful in assessing and monitoring diseases has stimulated research towards more efficient and flexible radiosynthetic routes, including newer technologies. The traditional vessel-based approach suffers from limitations concerning flexibility, reagent mass needed, hardware requirements, large number of connections and valves, repetitive cleaning procedures and overall big footprint to be shielded from radiation. For these reasons, several research groups have started to investigate the application of the fast growing field of microfluidic chemistry to radiosynthetic procedures. After the first report in 2004, many scientific papers have been published and demonstrated the potential for increased process yields, reduced reagent use, improved flexibility and general ease of setup. This review will address definitions occurring in microfluidics as well as analyze the different approaches under two macro-categories: microvessel and microchannel. In this perspective, several works will be collected, involving the use of positron emitting species ((11)C, (18)F, (64)Cu) and the fewer examples of gamma emitting radionuclides ((99m)Tc, (125/131)I). New directions in microfluidic research applied to PET radiochemistry, future developments and challenges are also discussed.