Towards zero-waste processes: Waste wool derivatives as phosphate adsorbents and auxiliaries for textiles' natural dyeing.

The textile industry is a pillar of the manufacturing sector worldwide, but it still represents a significantly polluting production sector since it is energy-, water- and natural resource-intensive. Herein, waste wool that did not meet the technical requirements to be used for yarns and fabrics was recovered first to prepare materials for wastewater remediation, specifically for phosphate removal. The wool underwent an alkaline treatment, eventually saturated with FeCl3 and then left at room temperature or thermally treated to induce crosslinking/stabilisation, obtaining adsorbent panels. The main characterisation findings concerned the impact of alkaline treatment on morphology and structure; additionally, the samples with iron displayed a behaviour attributable to a crosslinking effect operated by Fe3+. Batch experiments showed that only samples with iron were efficient in phosphate adsorption, with a high removal percentage obtained in a wide pH range. Adsorption isotherms and kinetics were investigated, suggesting a complex system of interactions. Moreover, during the alkaline treatment necessary to prepare such wool-derived adsorbent panels, a significant amount of wool hydrolysates left in the solution was produced. These substances, in view of zero-waste procedures, were isolated and re-employed as dyeing auxiliaries. Preliminary results demonstrated that the wool hydrolysates enabled the dyeing of cotton with natural dyes, which is generally a tricky process.

Current trends in textile wastewater treatment-bibliometric review.

A bibliometric study using 1992 to 2021 database of the Science Citation Index Expanded was carried out to identify which are the current trends in textile wastewater treatment research. The study aimed to analyze the performance of scholarly scientific communications in terms of yearly publications/citations, total citations, scientific journals, and their categories in the Web of Sciences, top institutions/countries and research trends. The annual publication of scientific articles fluctuated in the first ten years, with a steady decrease for the last twenty years. An analysis of the most common terms used in the authors' keywords, publications' titles, and KeyWords Plus was carried out to predict future trends and current research priorities. Adsorbent nanomaterials would be the future of wastewater treatment for decoloration of the residual dyes in the wastewater. Membranes and electrolysis are important to demineralize textile effluent for reusing wastewater. Modern filtration techniques such as ultrafiltration and nanofiltration are advanced membrane filtration applications.

Dyeing Improvement and Stability of Antibacterial Properties in Chitosan-Modified Cotton and Polyamide 6,6 Fabrics.

Cotton and polyamide 6,6 fabrics coated with chitosan, a natural biopolymer, have been tested against two different bacteria strains: Staphylococcus aureus as Gram-positive bacterium and Escherichia coli as Gram-negative bacterium. Using the ASTM standard method (Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions) for antibacterial testing, the treated fabrics is contacted for 1 h with the bacterial inoculum, the present study aims to investigate the possibility to reach interesting results considering shorter contact times. Moreover, the antibacterial activity of chitosan-treated fibers dyed with a natural dye, Carmine Red, was evaluated since chitosan has an interesting property that favors the attachment of the dye to the fiber (cross-linking ability). Finally, fabric samples were tested after washing cycles to verify the resistance of the dye and if the antibacterial property was maintained.

Functionalization of Cotton Fabrics with Polycaprolactone Nanoparticles for Transdermal Release of Melatonin.

Drug delivery by means of transdermal patches raised great interest as a non-invasive and sustained therapy. The present research aimed to design a patch for transdermal delivery of melatonin, which was encapsulated in polycaprolactone (PCL) nanoparticles (NPs) by employing flash nanoprecipitation (FNP) technique. Melatonin-loaded PCL nanoparticles were successfully prepared with precise control of the particle size by effectively tuning process parameters. The effect of process parameters on the particle size was assessed by dynamic light scattering for producing particles with suitable size for transdermal applications. Quantification of encapsulated melatonin was performed by mean of UV spectrophotometry, obtaining the estimation of encapsulation efficiency (EE%) and loading capacity (LC%). An EE% higher than 80% was obtained. Differential scanning calorimetry (DSC) analysis of NPs was performed to confirm effective encapsulation in the solid phase. Cotton fabrics, functionalized by imbibition with the nano-suspension, were analyzed by scanning electron microscopy to check morphology, adhesion and distribution of the NPs on the surface; melatonin transdermal release from the functionalized fabric was performed via Franz's cells by using a synthetic membrane. NPs were uniformly distributed on cotton fibres, as confirmed by SEM observations; the release test showed a continuous and controlled release whose kinetics were satisfactorily described by Baker-Lonsdale model.

Preparation of functionalized cotton fabrics by means of melatonin loaded ß-cyclodextrin nanosponges.

Biofunctional textiles are a new category of advanced materials which combine conventional textiles with advanced drug delivery systems to obtain fabrics able to release active principles through skin. The work presents the synthesis of hyper cross-linked ß-cyclodextrins nanosponges with the carbonyl group acting as bridge between cyclodextrin molecules. The result of the synthesis is a 3-D porous structure, where melatonin molecules have been complexed. The complex has been characterized by elemental analysis, DSC, SEM, XRD and FT-IR spectroscopy and the results confirm that melatonin interacts with the synthesized nanosponge at molecular level. Melatonin loaded nanosponges have been dispersed on cotton fibres, which have proved to be a suitable substrate for durable nanosponge adsorption. The in vitro release tests from the funtionalized fabrics have shown a zero order kinetics, which is typical of a reservoir diffusion controlled system.