Full recess integration of small diameter low threshold VCSELs within Si-CMOS ICs.

Oxide-aperture vertical-cavity surface-emitting lasers (VCSELs) have been integrated as individual device pills within the dielectric stacks of commercially produced silicon integrated circuits and monolithically connected electrically with the underlying circuitry using technology compatible with wafer-scale processing. The 55 microm diameter, 8 microm tall device pills were bonded in recesses etched to reveal buried contact/bond pads included in the IC layout; the surface was replanarized, contact vias formed, and interconnect metal deposited and patterned. The typical CW threshold current, 1 to 2.5 mA, was the same before and after integration, and integrated devices had thermal impedances similar to devices on their native GaAs substrates.

Chemical speciation of nanoparticles surrounding metal-on-metal hips.

Spectromicroscopy of tissue surrounding failed CoCr metal-on-metal hip replacements detected corroded nanoscale debris in periprosthetic tissue in two chemical states, with concomitant mitochondrial damage. The majority of debris contained Cr(3+), with trace amounts of oxidised cobalt. A minority phase containing a core of metallic chromium and cobalt was also observed.

Two-dimensional nanosheets produced by liquid exfoliation of layered materials.

If they could be easily exfoliated, layered materials would become a diverse source of two-dimensional crystals whose properties would be useful in applications ranging from electronics to energy storage. We show that layered compounds such as MoS(2), WS(2), MoSe(2), MoTe(2), TaSe(2), NbSe(2), NiTe(2), BN, and Bi(2)Te(3) can be efficiently dispersed in common solvents and can be deposited as individual flakes or formed into films. Electron microscopy strongly suggests that the material is exfoliated into individual layers. By blending this material with suspensions of other nanomaterials or polymer solutions, we can prepare hybrid dispersions or composites, which can be cast into films. We show that WS(2) and MoS(2) effectively reinforce polymers, whereas WS(2)/carbon nanotube hybrid films have high conductivity, leading to promising thermoelectric properties.

High-throughput continuous hydrothermal flow synthesis of Zn-Ce oxides: unprecedented solubility of Zn in the nanoparticle fluorite lattice.

High-throughput continuous hydrothermal flow synthesis has been used as a rapid and efficient synthetic route to produce a range of crystalline nanopowders in the Ce-Zn oxide binary system. High-resolution powder X-ray diffraction data were obtained for both as-prepared and heat-treated (850 degrees C for 10 h in air) samples using the new robotic beamline I11, located at Diamond Light Source. The influence of the sample composition on the crystal structure and on the optical and physical properties was studied. All the nanomaterials were characterized using Raman spectroscopy, UV-visible spectrophotometry, Brunauer-Emmett-Teller surface area and elemental analysis (via energy-dispersive X-ray spectroscopy). Initially, for 'as-prepared' Ce(1-x)Zn(x)O(y), a phase-pure cerium oxide (fluorite) structure was obtained for nominal values of x=0.1 and 0.2. Biphasic mixtures were obtained for nominal values of x in the range of 0.3-0.9 (inclusive). High-resolution transmission electron microscopy images revealed that the phase-pure nano-CeO(2) (x=0) consisted of ca 3.7 nm well-defined nanoparticles. The nanomaterials produced herein generally had high surface areas (greater than 150 m(2) g(-1)) and possessed combinations of particle properties (e.g. bandgap, crystallinity, size, etc.) that were unobtainable or difficult to achieve by other more conventional synthetic methods.