Scapulohumeral rhythm in shoulders with reverse shoulder arthroplasty measured with a new portable three-dimensional scapular kinematics assessment system.

BACKGROUND: Reverse shoulder arthroplasty (RSA) is a valid and increasingly popular treatment option in eccentric arthrosis and cuff arthropathy. We know that the deltoid is the motor of RSA. However, the role of scapular motion has been poorly documented in the literature. The aim of our study is to analyze and quantify the role of the scapular contribution in the functional outcome of patients undergoing RSA. MATERIALS AND METHODS: Fourteen patients who underwent primary RSA were included in the study. In all cases, a reverse prosthesis with lateralizing stem was implanted. All patients underwent clinical examination, video recording, and motion analysis. X-ray and postoperative CT examinations were collected to evaluate positioning and any loosening. ShowMotion (NCS Lab srl, Modena, Italy) 3D kinematic tracking system was used to evaluate and measure the scapular motion in 3 planes. RESULTS: All patients show substantial amount of posterior tilting and lateral rotation starting at 30° in forward elevation. A further difference is the anticipation of the retraction during the range of motion in the RSA side. The contribution of scapular motion in the RSA shoulder was greater than in the healthy shoulder. In patients with bilateral RSA, the contribution of scapular motion was higher in tilting and lateral rotation in the worse shoulder side in terms of range of motion. This means that to compensate for the loss of glenohumeral motion in RSA, more scapula-thoracic motion is needed to obtain the same thoraco-humeral elevation angle. CONCLUSIONS: In the light of what has been measured, the post-RSA scapular kinematics has typical characteristics that must be achieved in order to obtain a good functional outcome. We can conclude that on the RSA side, the patients anticipate upward rotation both in flexion and abduction. The contribution of the upward rotation to elevation in the RSA group is therefore more significant. In addition to this, to facilitate elevation movements, there is an anticipation of the scapular retraction and a more prominent tilt resulting in different scapular kinematics. The analysis of scapular motion could be useful in the postoperative follow-up of patients undergoing RSA surgery and improve adaptative physiotherapy protocols. It potentially can even be included in future arthroplasty planning systems.

BIO-RSA vs. metal-augmented baseplate in shoulder osteoarthritis with multiplanar glenoid deformity: a comparative study of radiographic findings and patient outcomes.

BACKGROUND: Reverse shoulder arthroplasty (RSA) requiring extensive reaming to address severe glenoid bone loss increases the risk of glenoid medialization and baseplate failure. We hypothesized that (1) metal-augmented baseplate prevents the medialization of the joint line and preserves glenoid bone stock similarly to bony increased-offset (BIO)-RSA and (2) bone graft viability and healing in BIO-RSA patients become compromised over time. MATERIALS AND METHODS: Eighty-one patients (83 shoulders) underwent glenoid lateralization with bone (BIO-RSA group, 44) or metal-augmented baseplate (metallic increased-offset [MIO]-RSA group, 39) and a minimum follow-up of 24 months were included. The orientation and direction of glenoid erosion was identified and recorded using computerized 3D planning. Active range of motion, and the Western Ontario Osteoarthritis of the Shoulder (WOOS) index were assessed before arthroplasty and at the last follow-up visits. Radiographic changes around the glenoid and humeral components were assessed. Healing and thickness of bone graft were evaluated by predefined criteria. Postoperative global glenoid inclination (ß angle) and retroversion were also measured. RESULTS: Delta scores of active anterior elevation were higher in the MIO-RSA group (P = .027). The differences in the other planes of shoulder motion and in WOOS index scores between the groups were not significant. Preoperative glenoid retroversion was higher in BIO-RSA patients, and glenoid inclination was similar in both groups. Type B2 and B3 glenoids had a posterior-central (91%) and posterior-superior (90%) erosion with a mean posterior humeral head subluxation of 76% and 78%, respectively. The direction of erosion in type E2 and E3 glenoids was posterior-superior, with a mean posterior humeral head subluxation of 74%. The rate of high position of the glenosphere was higher in the BIO-RSA group (P = .022), whereas the values of ß angle and postoperative retroversion were similar in the 2 groups. BIO-RSA group showed radiolucent lines <2 mm around the bone graft in 16 patients (36.4%) and decreased thickness in 15 (34.1%). Incomplete baseplate seating was found in 4 MIO-RSA patients (10%). We found higher rates of humerus condensation lines in MIO-RSA patients (P = .01) and higher rates of cortical thinning and tuberosity resorption in the BIO-RSA group (P = .027 and P = .004, respectively). CONCLUSION: Metal-augmented glenoid is a suitable alternative to BIO-RSA to preserve bone and prevent the medialization of the joint line in arthritic glenoid with multiplanar glenoid deformity. Bone and metal augmentation provided satisfactory clinical outcomes. Bone graft resorption in BIO-RSA patients raise concern about the risk of baseplate loosening and requires further long-term studies.

Navigation in reverse shoulder arthroplasty: how the lateralization of glenosphere can affect the clinical outcome.

INTRODUCTION: One of the main causes of RSA failure is attributable to the malpositioning of the glenoid component. Initial experiences with computer-assisted surgery have shown promising results in increasing the accuracy and repeatability of placement of the glenoid component and screws. The aim of this study was to evaluate the functional clinical results, in terms of joint mobility and pain, by correlating them with intraoperative data regarding the positioning of the glenoid component. The hypothesis was that the lateralization more than 25 mm of the glenosphere can led to better stability of the prosthesis but should pay in term of a reduced range of movement and increased pain. MATERIALS AND METHODS: 50 patients were enrolled between October 2018 and May 2022; they underwent RSA implantation assisted by GPS navigation system. Active ROM, ASES score and VAS pain scale were recorded before surgery. Preoperative data about glenoid inclination and version were collected by pre-op X-Rays an CT. Intraoperative data-inclination, version, medialization and lateralization of the glenoid component-were recorded using computer-assisted surgery. 46 patients had been further clinically and radiographically re-evaluated at 3-months, 6-months, 1-year, and 2-years follow-up. RESULTS: We found a statistically significant correlation between anteposition and glenosphere lateralization value (DM - 6.057 mm; p = 0.043). Furthermore a statistically significant correlation has been shown between abduction movement and the lateralization value (DM - 7.723 mm; p = 0.015). No other statistically significant associations were found when comparing the values of glenoid inclination and version with the range of motion achieved by the patients after reverse shoulder arthroplasty. CONCLUSION: We observed that the patients with the best anteposition and abduction results had a glenosphere lateralization between 18 and 22 mm. When increasing the lateralization above 22 mm or reducing it below 18 mm, on the other hand, both movements considered decreased their range. LEVEL OF EVIDENCE: Level IV; Case Series; Treatment Study.

Reverse shoulder arthroplasty in obstetric brachial plexus injury: our experience with shoulder motion analysis.

BACKGROUND: Obstetric brachial plexus injury (OBPI) is a weakening or paralysis of the upper arm caused by brachial plexus injury followed by a muscle paralysis with severe repercussions on the movement of the shoulder joint following a progressive glenohumeral joint deformity. This case series analyzes the clinical and radiological outcomes of reverse total shoulder arthroplasty (RSA) in OBPI patients with a follow-up of 2 years. MATERIALS AND METHODS: OBPI patients with secondary end-stage glenohumeral arthritis were enrolled in the study and they were treated with RSA. Patient demographics and clinical outcomes [Range of Motion (ROM), Visual Analog Scale (VAS), Oxford Shoulder Score (OSS)] were evaluated. A novel Shoulder motion analysis was carried out to investigate specific movement patterns of scapulothoracic movements in these patients. This study is a prospective cohort study. RESULTS: Four Patients (M: F = 1:3) were enrolled in the study, the mean age was 49.3 years (+ 2.75), the mean OSS (Oxford Shoulder Score) decreased from 48.8 (± 2.5) preoperatively to 18.30 (± 2.78), the mean VAS (Visual Analog Scale) decreased from 7.25 (± 0.5) to 1.7 (± 0.3) in the follow up (∆% relative pain reduction:- 76.5%), Shoulder ROM obtained an improvement (p < 0.05) except for abduction and external rotation. The average follow-up time was 26.3 months (+- 4.5). Shoulder motion analysis showed a complete loss of the scapular tilting above 90 degrees of flexion compared to the typical one of standard RSA with a pattern shifted towards scapular retraction (engaging trapezius and rhomboid muscles) to compensate the loss of the posterior tilting. CONCLUSIONS: RSA in OBPI patients demonstrated a significant improvement of pain symptoms and a moderate improvement in daily activities, anyway with a more appreciable quality of life over time even if the marked hypotrophy especially of the posterior shoulder muscles showed some limits in maintaining suspension of the upper limb and a minor external rotation, with an internal rotation attitude during the movements. LEVEL OF EVIDENCE: Level IV, Case series.

Study of a constrained finite element elbow prosthesis: the influence of the implant placement.

BACKGROUND: The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic configuration, identify the areas of greatest stress in the prosthesis-bone-cement interface, and evaluate the most wearing working conditions. MATERIALS AND METHODS: By means of a reverse engineering process and using a 3D laser scanner, CAD (computer-aided drafting) models of a constrained elbow prosthesis were acquired. These CAD models were developed and their elastic properties, resistance, and stresses were studied through finite element analysis (finite element method-FEM). The obtained 3D elbow-prosthesis model was then evaluated in cyclic flexion-extension movements (> 10 million cycles). We highlighted the configuration of the angle at which the highest stresses and the areas most at risk of implant mobilization develop. Finally, we performed a quantitative study of the stress state after varying the positioning of the stem of the ulnar component in the sagittal plane by ± 3°. RESULTS: The greatest von Mises stress state in the bone component for the 90° working configuration was 3.1635 MPa, which occurred in the most proximal portion of the humeral blade and in the proximal middle third of the shaft. At the ulnar level, peaks of 4.1763 MPa were recorded at the proximal coronoid/metaepiphysis level. The minimum elastic resistance and therefore the greatest stress states were recorded in the bone region at the apex of the ulnar stem (0.001967 MPa). The results of the analysis for the working configurations at 0° and 145° showed significant reductions in the stress states for both prosthetic components; similarly, varying the positioning of the ulnar component at 90° (- 3° in the sagittal plane, 0° in the frontal plane) resulted in better working conditions with a greater resulting developed force and a lower stress peak in the ulnar cement. CONCLUSION: The areas of greatest stress occur in specific regions of the ulnar and humeral components at the bone-cement-prosthesis interface. The heaviest configuration in terms of stresses was when the elbow was flexed at 90°. Variations in the positioning in the sagittal plane can mechanically affect the movement, possibly resulting in longer survival of the implant.

Anatomically reduced fixation should always be considered when treating B and C proximal epiphyseal humeral fractures.

BACKGROUND: Proximal humeral fractures are commonly observed in elderly patients. Management of these injuries is controversial. Literature comparing locking plate fixation, arthroplasty, and conservative treatments show no clear advantages for any of these management strategies. Thus far, no study has considered anatomically reduced fractures obtained after locking plate treatment. To clarify the best surgical procedure in middle-aged patients, we considered outcomes and major complications leading to surgical revision following an anatomically reduced fracture fixed with locking plate and reverse shoulder arthroplasty (RSA) in the treatment of type B/C fractures in patients between 50 and 75 years of age. METHODS: This is a retrospective study including 59 patients between 50 and 75 years of age with type B/C proximal humeral fracture treated with RSA or with locking plate fixation (resulting in an anatomical reduction) between January 2010 and December 2018. Preoperative radiographs and computed tomography (CT) were evaluated in all patients. Clinical and radiologic follow-up was performed using range of motion (ROM), the Constant-Murley Score (CMS), the Oxford Shoulder Score (OSS), the Simple Shoulder Test (SST), the Subjective Shoulder Value (SSV), and visual analog scale (VAS). Major complications were considered. RESULTS: In the plate fixation group, ROM, CMS, SST, and VAS were higher than in the RSA group. Lower complication rates compared with the literature were observed in both groups. Anatomically reduced fracture fixed with plate and screw could outperform RSA in terms of outcome. In second-level centers where traumatology is performed by surgeons with great expertise in upper limb trauma, the choice between plate fixation and reverse arthroplasty should be made during surgery. CONCLUSION: Anatomically reduced fractures showed better outcomes compared with RSA in type B/C fractures. Surgeons should always try to perform a reduction of the fracture in order to understand if a plate fixation could be feasible. If it is impossible to perform an anatomical reduction, we suggest to consider RSA. This is a retrospective observational study.

Acute elbow dislocation: comparison between magnetic resonance imaging and intra-operative finding of ligament injury.

PURPOSE: The aim of this current study was to assess elbow ligament tears after dislocation using magnetic resonance imaging (MRI) and to correlate any pre-operative imaging with intra-operative findings of elbow ligament tears. METHODS: We prospectively included 32 patients with acute elbow dislocation investigated by MRI at a means of five days from dislocation. A simple elbow dislocation was diagnosed in 14 patients (44%); associated bone injuries were identified in 18 elbows (56%). Surgical repair of elbow ligaments was carried out in 23 patients, and nine cases were treated non-operatively. A blinded MRI evaluation of all 32 elbows was performed by an orthopaedic surgeon (rater 1) and a musculoskeletal radiologist (rater 2). RESULTS: Inter-rater agreement for MRI evaluation of 32 was poor for lateral ulnar collateral ligament (LUCL) tears, fair for radial collateral ligament (RCL), moderate for annular ligament (AL), and fair for ulnar collateral ligament (UCL). All tears were reported as complete by rater 1; 13/32 partial tears were identified by rater 2 (LUCL = 2, RCL = 2, UCL = 9). Correlation between surgical and MRI findings showed good inter-rater agreement for LUCL and AL tears in both raters. Agreement for RCL tear was poor for rater 1 and fair for rater 2; agreement for UCL tear was fair for rater 1 and poor for rater 2. Intra-operative findings showed ten radial head fractures (RHFs) and ten coronoid fractures (CFs). LUCL tears were found in the four cases of type II RHFs and in 3/4 cases of CFs. Bone injuries and ligament tears were not significantly associated. CONCLUSION: MRI scan supported surgeons to identify soft tissue injuries and to address the most suitable surgical approach after acute elbow dislocation. Inter-observer agreement for intra-operative findings was high for LCL complex injuries and poor for UCL.

A kinematic and electromyographic comparison of a Grammont-style reverse arthroplasty combined with a l'Episcopo transfer compared to a lateralized humeral component reverse for restoration of active external rotation.

PURPOSE: To assess kinematic and electromyographic findings of two designs of reverse total shoulder arthroplasty (RTSA). We tested two hypotheses: (H1) Grammont-style (RTSA) with l'Episcopo tendon transfer gains similar postoperative kinematic findings of a lateralized humeral component RTSA without a tendon transfer; (H2) RTSA with lateralized humeral component induces earlier shoulder muscle activation during shoulder motion compared with standard Grammont prosthesis with l'Episcopo transfer. METHODS: Twenty-five patients with a cuff tear arthropathy, pseudoparalysis, and a positive dropping sign were sequentially included. A Grammont-style RTSA with a l'Episcopo tendon transfer was implanted in 13 patients (medialized humerus and transfer group) and an on-lay curved-stem RTSA in 12 (lateralized humerus group). Constant score; the disabilities of the arm, shoulder, and hand (DASH) score; and active shoulder range of motion (flexion, abduction, external rotation, and internal rotation) were measured pre- and postoperatively. Upper limb kinematic and surface electromyography (EMG) (anterior and posterior deltoid; upper, middle, and lower trapezius; and the upper and lower latissimus dorsi muscles) were recorded during active range of motion. RESULTS: At > 24 months of follow-up, the Constant and DASH scores and active shoulder range of motion improved in both groups (p < 0.0001). Internal rotation was significantly higher in the lateralized humerus group than in the medialized humerus and transfer group (p = 0.004). The dropping sign was found in 0/12 patients in the lateralized humerus group and in 5/13 patients in the medialized humerus and transfer group (p < 0.001). Kinematic findings were similar between groups (p = 0.286). A pattern of earlier muscle activation in the lateralized humerus group was found as compared to the transfer group as follows: (i) posterior deltoid during external rotation (p = 0.004); (ii) upper latissimus dorsi and middle and lower trapezius during flexion (p = 0.004, p = 0.005, and p = 0.042, respectively); (iii) lower latissimus dorsi during abduction (p = 0.016). CONCLUSION: RTSA with a lateralized humeral component provided similar active external rotation restoration to a Grammont-style RTSA with a l'Episcopo procedure in patients with a dropping sign. The posterior deltoid muscle underwent earlier activation during active external rotation in the lateralized humerus RTSA group as compared to the tendon transfer group. Our findings demonstrated the H1 and only partially demonstrated the H2 of the study.

Surgical tips and tricks for coronal shear fractures of the elbow.

INTRODUCTION: Coronal shear fractures of the distal humerus represent an uncommon lesion and could be burdened by high complications. This complex lesion requires an accurate reduction and surgical fixation for a better outcome. Different techniques have been described, however no standard protocol have been proposed. Purpose of this retrospective study, is to evaluate the clinical and radiological outcome with posterior cannulated self-tapping headless screws followed by an early-active-motion protocol and to outline the surgical tips and tricks for different fracture patterns. MATERIALS AND METHODS: From 2013 to 2019, a consecutive series of 24 patients with coronal shear fracture undergoing ORIF were included in the study. Fractures were classified according to Dubberley's classification. Cannulated self-tapping headless screws were used to fix the fragments. When necessary, additional cannulated half-threaded screws on the lateral edge of the humerus were used, as well as bone chips and fibrin sealant on severe comminution. All patients underwent an assisted early-active-motion rehabilitation protocol. Mean follow-up was 30 months; patients underwent standard X-rays and clinical outcome assessment with range of motion, Broberg and Morrey score and MEPI score. RESULTS: Surgical fixation with headless screw guaranteed complete healing of all shear fractures examined, no loss of reduction were reported. ROM assessment showed good results with an average arc of 113.1°. Excellent to good Broberg-Morrey and MEPI score were reported. No cases of avascular necrosis nor post-traumatic osteoarthritis resulted in our series. Complications occurred in 16.6% of the patients. CONCLUSION: Coronal shear fracture represents a challenging injury to treat. Anatomical reduction and the use of cannulated self-tapping headless screws from posterior provide a stable fixation, high union rates and good elbow function, with a low cartilage damage and risks of necrosis over 2 years of follow-up. LEVEL OF EVIDENCE: Therapeutic III.

Pediatric elbow arthroscopy: clinical outcomes and complications after long-term follow-up.

BACKGROUND: Elbow arthroscopy is becoming increasingly important for the treatment of a wide range of acute and chronic elbow pathologies. Even if elbow arthroscopy is technically demanding, in the pediatric population this minimally invasive technique is preferred by many surgeons for the treatment of pathologies such as osteochondritis dissecans (OCD), posttraumatic stiffness (PTS), or elbow posterior impingement (PI). The aim of this study is to evaluate outcomes and safety of elbow arthroscopy in the pediatric and adolescent population after long-term follow-up. MATERIALS AND METHODS: In this retrospective study, 26 patients younger than 18 years old undergoing elbow arthroscopy were evaluated. All surgeries were performed by a single senior surgeon. Patients were divided into three subgroups based on preoperative diagnosis: OCD, PTS, and PI. After at least 60 months follow-up, several outcome measures, including range of motion (ROM), Mayo Elbow Performance Score (MEPS), and visual analog scale (VAS) were evaluated in relation to preoperative values. The level of patient satisfaction on a five-level Likert scale, any limitation or change in sport activity, and the onset of any possible complications were also evaluated. RESULTS: In the study population, we found an improvement in ROM (flexion of 14.4 ± 13.6°, extension of 19.5 ± 13.9°, pronation of 5.8 ± 5.7°, and supination of 8.5 ± 11.6°) and in validated outcome measures (MEPS of 21.0 ± 13.5 points and VAS of 3.8 ± 2.2 points). The satisfaction rate was 4.5, with no dissatisfaction. Eighty-seven percent of patients fully recovered their performance levels, 9% changed sport, and 4% were unable to return to sport. We identified one major and one minor complication, with an overall complication rate of 7.7%. No neurovascular injuries were detected. CONCLUSIONS: Elbow arthroscopy in a pediatric population can be considered an effective and safe procedure for selected pathologies when performed by an experienced surgeon. At long-term follow-up, we reported excellent clinical outcomes (both objective and subjective), with a relatively low complication rate without permanent injuries. LEVEL OF EVIDENCE: Level IV-case series.

Isolate and irreducible radial head dislocation in children: a rare case of capsular interposition.

BACKGROUND: Radial head dislocation with no associated lesions, is a relatively uncommon injury in children. In this case report, it is reported a case of anteromedial locked radial head dislocation in children, and we discuss its clinical presentation and pathogenetic mechanism of injury. CASE PRESENTATION: An 8-year-old girl fell off on her right forearm with her right elbow extended in hyperpronation. An isolated radio-capitellar dislocation was identified with no other fractures or neurovascular injuries associated. Elbow presented an extension-flexion arc limited (0°- 90°), and the prono-supination during general anesthesia shows "a sling effect" from maximal pronation (+ 55°) and supination (+ 90°) to neutral position of forearm. The radial head dislocation was impossible to reduce and an open reduction was performed using lateral Kocher approach. The radial head was found "button-holed" through the anterior capsule. The lateral soft tissues were severely disrupted and the annular ligament was not identifiable. Only by cutting the lateral bundle of the capsule was possible to reduce the joint. At 50 moths follow-up, patient presented a complete Range of motion (ROM), complete functionality and no discomfort or instability even during sport activities. DISCUSSION AND CONCLUSION: It is important to understand the pathogenic mechanisms of locked radial head dislocation in children. Some mechanism described are the distal biceps tendon or the brachialis tendon interposition. However even the anterior capsule can hinder reduction. A characteristic "sling-effect" of the forearm could be pathognomonic for capsular button-holing. Surgical release of the capsular bundle sometimes is the only way to reduce the dislocation and obtain a good outcome.

Isolated displaced type II partial articular radial head fracture: correlation of preoperative imaging with intraoperative findings of lateral ulnar collateral ligament tear.

BACKGROUND: The aim of this study was to determine the lateral ulnar collateral ligament (LUCL) injury associated with isolated radial head fracture (RHF) and the relationship of the ligament injury with the displacement of the fragment-loss of contact-in unstable displaced partial articular RHF in individuals without any history of ulnohumeral dislocation. METHODS: We retrospectively identified 131 consecutive patients who underwent open reduction and internal fixation of isolated closed Mason type II RHF performed at our institution. We identified 3 subsets by the pattern of RHF and the position of the unstable fragment (anterior or posterior) relative to the capitulum humeri: displaced stable (group I), displaced anterior unstable (group II), and displaced posterior unstable (group III). Standard radiographs were obtained preoperatively and postoperatively. The pattern of lateral collateral ligament avulsion and its distribution were inferred from intraoperative records. RESULTS: Preoperative radiographs of the 131 patients showed 101 nonseparated fractures (77%, group I) and 30 unstable fractures (23%). Anterior displacement of the fragment was found in 18 elbows (14%, group II) and posterior displacement in 12 (9%, group III). LUCL avulsion was found in 18 of 30 unstable RHFs (60%) and in 1 of 60 stable RHFs (1.6%). CONCLUSION: RHF is a complex fracture often associated with soft tissue lesions. It is important to determine which structures need to be repaired to avoid complications that could lead to elbow instability. The RHF pattern and classification as stable or unstable can help the surgeon in the identification and treatment of LUCL lesions.

Pre-operative factors affecting the indications for anatomical and reverse total shoulder arthroplasty in primary osteoarthritis and outcome comparison in patients aged seventy years and older.

BACKGROUND: We evaluated the pre-operative factors affecting anatomical and reverse total shoulder arthroplasty (TSA and RTSA) indications in primary osteoarthritis and compared outcomes in patients aged 70 years and older. METHODS: Fifty-eight patients received a TSA with an all-polyethylene glenoid component (APGC) or an RTSA with/without glenoid lateralization and the same curved short-stem humeral component. Active anterior and lateral elevation (AAE, ALE), internal and external rotation (IR, ER), pain, and the Constant-Murley score (CS) were recorded pre and post-operatively. Pre-operative rotator cuff (RC) fatty infiltration (FI) and modified Walch glenoid morphology were assessed. Humeral and glenoid component radiological outcomes were recorded. RESULTS: RTSA were older than TSA patients (p = 0.006), had lower pre-operative AAE (p < 0.001), ALE (p < 0.001), IR (p = 0.002), pain (p = 0.008) and CS (p < 0.001), and greater supraspinatus FI (p < 0.001). At a mean of 28.8 months, both implants yielded significantly different post-operative scores and similar complication rates. Both groups achieved similar post-operative AAE, ER, and IR; ALE was higher in TSA (p = 0.006); and AAE and ALE delta scores were higher in RTSA (p = 0.045 and p = 0.033, respectively). Radiolucent line rates were higher around the TSA APGC than the RTSA baseplate (p = 0.001). High-grade RC FI adversely affected mobility improvement. Humeral cortical thinning was significantly higher in TSA (p = 0.001). CONCLUSION: RTSA patients were older, had poorer pre-operative active mobility, and had greater RC FI than TSA. Both devices provided good mid-term clinical and ROM improvement.

Shoulder arthroplasty to address the sequelae of anterior instability arthropathy and stabilization procedures: systematic review and meta-analysis.

PURPOSE: Chronic anterior glenohumeral joint instability is a common situation and can lead to progressive cartilage deterioration and ultimately instability arthopathy. Progressive cartilage deterioration can occur despite conservative or surgical treatment and the sequelae of these conditions are often addressed with total shoulder arthroplasty. Aims of the present study were to analyze the available literature to describe the technical aspects of this particular operation and to report outcomes and complication rates. The hypothesis was that shoulder arthropalsty in the sequelae of instability had lower outcomes and higher complication rates than arthroplasties for primary arthritis. METHODS: A systematic review of the literature was performed, in accordance with the PRISMA guidelines. PubMed, Ovid, Cochrane Reviews, and Google Scholar were comprehensively searched using a combination of the following keywords: shoulder arthroplasty, reverse shoulder arthroplasty, dislocation arthropathy, capsulorrhaphy arthropathy and stabilization procedures. RESULTS: Thirteen studies with 365 patients met inclusion criteria. Since 13 patients were lost to follow-up, 352 were reviewed at an average follow-up of 53.4 months. The average Constant-Murley (CM) and American Shoulder and Elbow Society (ASES) scores improved from 35.6 and 35.7 to 72.7 and 77, respectively. The overall complication rate was 25.7% and the reoperation rate was 18.5%. Radiographs at follow-up revealed radiolucent lines on the humerus in 12.4% of cases and radiolucent lines or notching on the glenoid side in 22.7% of cases. The average Methodological Index for Non-randomized Studies Score (MINORS) was 12.9 for non-comparative studies and 21.3 for comparative studies. CONCLUSION: Shoulder arthroplasty to address the sequelae of instability arthropathy and stabilization procedures can be a challenging procedure as a consequence of the distorted anatomy and severe glenohumeral joint pathology. Complication and reoperation rates are higher compared to shoulder arthroplasty for primary glenohumeral joint arthritis; however, the difference is not statistically significant. When reverse shoulder arthroplasties (RSA) were considered as a subgroup and compared to anatomic shoulder replacements (total shoulders and hemiarthroplasties), they showed a lower revision rate.

Volar PEEK plate for distal radius fracture: analysis of adverse events.

BACKGROUND: The aim of the present retrospective study was to evaluate complications following carbon-fiber-reinforced polyetheretherketon (CFR-PEEK) volar plating in distal radius fracture in a large cohort of patients. As an alternative to conventional metallic devices, CFR-PEEK plates have been introduced over the last few years. METHODS: We performed a retrospective study including all patients who were treated for distal radius fracture using a volar fixed-angle plate DiPHOS-RM (Lima Corporate, Udine, Italy). All CFR-PEEK plates implanted were reviewed between May 2012 and December 2017. Plate removal, second surgery and adverse events were collected by reviewing medical records. A total of 110 patients were included with a mean follow-up of 4 years. RESULTS: Adverse side effects were observed in 9 cases (8%), developed during or after treatment. The most frequent complication was represented by intraoperative plate rupture (4%). Infection was reported in one case. DISCUSSION: The rate of complications of PEEK volar plates seems to be similar to those occurring with plates of different materials. Advantages of PEEK plates are the absence of the cold-welding phenomenon and the absence of exuberant bone callus on the plate, ensuring an easy hardware removal. Intraoperative rupture remains the main complication correlated with PEEK material. These complications can be reduced with an accurate surgical technique, especially at the beginning of the learning curve. LEVEL OF EVIDENCE: Therapeutic IV.

Assessment of anatomical and reverse total shoulder arthroplasty with the scapula-weighted Constant-Murley score.

AIM OF THE STUDY: To evaluate total (TSA) and reverse total shoulder arthroplasty (RTSA) using the Constant-Murley score (CMS) and the scapula-weighted (SW) CMS, an integrated outcome measure that takes into account the compensatory movements of the scapula. METHODS: Twenty-five consecutive patients, 12 with TSA and 13 with RTSA, underwent kinematic analysis before and after shoulder replacement. Measurements included flexion (FLEX) and abduction (ABD) for the humerus and Protraction-Retraction (PR-RE), Medio-Lateral rotation (ME-LA), and Posterior-Anterior tilting (P-A) for the scapula. They were recorded at baseline (T0) and at six (T1) and 12 months (T2). Reference data were obtained from 31 control shoulders. RESULTS: At T1, differences in CMS and SW-CMS were not significant in either group, whereas values at T2 were significantly lower in RTSA patients (p = 0.310 and p = 0.327, respectively). In TSA shoulders, the compensatory scapular movements in FLEX were all reduced from T0 to T2, whereas P-A was increased in ABD. In RTSA patients, the compensatory scapular movements in FLEX showed a general reduction at T1, with an increase in P-A at T2, whereas in ABD, all increased at T1 and decreased at T2 except for P-A, which did not decrease. DISCUSSION: The SW-CMS showed that the physiological scapulothoracic motion was not restored in TSA and RTSA patients; it may be used as a reference for the gradual progression of deltoid and scapular muscle rehabilitation. CONCLUSIONS: The worse CMS and SW-CMS scores found in RTSA patients at six months may be due to the biomechanics of the reverse prosthesis and to the weakness of deltoid and periscapular muscles.

One and two-year clinical outcomes for a polyethylene glenoid with a fluted peg: one thousand two hundred seventy individual patients from eleven centers.

PURPOSE: Clinical shoulder science lacks a benchmark against which the early clinical value of new glenoid components can be compared; such a benchmark may be derived from a multicenter study of patients receiving an established, internationally used design of glenoid component. METHODS: We obtained data from 11 centers on 1270 patients having total shoulder arthroplasty using an all-polyethylene component with a fluted central peg. We analyzed individual patient outcomes at 1 and 2 years after surgery. We compared the improvement for each patient to the minimal clinically important difference (MCID) and calculated each patient's improvement as a percent of maximal possible improvement (MPI). RESULTS: The preoperative scores improved from SST 3 ± 2, ASES 37 ± 15, Constant score 36 ± 16, and Penn score 30 ± 19 to SST 10 ± 2, ASES 90 ± 12, Constant 76 ± 13, and Penn 80 ± 24 (p < 0.001 for each). A high percentage of patients improved by more than the MCID (SST 96%, ASES 98%, Constant 94%, Penn 93%) and obtained improvement of at least 30% of the MPI (SST 95%, ASES 98%, Constant 91%, Penn 87%). The clinical outcomes realized with this glenoid design were not worse for the 41% of shoulders with preoperative type B glenoids or for the 30% of shoulders with more than 15 degrees of glenoid retroversion. CONCLUSIONS: Individual patients from 11 international practices having total shoulder arthroplasty using a basic glenoid component design obtained highly significant clinical outcomes, providing a benchmark against which the early outcomes of new designs can be compared to determine whether they provide increased clinical value.

Revision of failed shoulder hemiarthroplasty to reverse total arthroplasty: analysis of 157 revision implants.

BACKGROUND: There remains a paucity of studies examining the conversion of failed hemiarthroplasty (HA) to reverse total shoulder arthroplasty (RTSA). Therefore, the purpose of this study was to examine a large series of revision HA to RTSA. METHODS: A population of 157 patients who underwent conversion of a failed HA to a revision RTSA from 2006 through 2014 were included. The mean follow-up was 49 months (range, 24-121 months). The indications for revision surgery included instability with rotator cuff insufficiency (n = 127) and glenoid wear (n = 30); instability and glenoid wear were associated in 38 cases. Eight patients with infection underwent 2-stage reimplantation. RESULTS: Patients experienced significant improvements in their preoperative to postoperative pain and shoulder range of motion (P < .0001), with median American Shoulder and Elbow Surgeons and Simple Shoulder Test scores of 60 and 6 points, respectively. There were 11 (7%) repeated revision surgeries, secondary to glenoid component loosening (n = 3), instability (n = 3), humeral component disassembly (n = 2), humeral stem loosening (n = 1), and infection (n = 2). Implant survivorship was 95.5% at 2 years and 93.3% at 5 years. There were 4 reoperations including axillary nerve neurolysis (n = 2), heterotopic ossification removal (n = 1), and hardware removal for rupture of the metal cerclage for an acromial fracture (n = 1). At final follow-up, there were 5 "at-risk" glenoid components. CONCLUSION: Patients experience satisfactory pain relief and recovery of reasonable shoulder function after revision RTSA from a failed HA. There was a relatively low revision rate, with glenoid loosening and instability being the most common causes.

Grammont humeral design versus onlay curved-stem reverse shoulder arthroplasty: comparison of clinical and radiographic outcomes with minimum 2-year follow-up.

BACKGROUND: There are few investigations comparing lateralized and medialized reverse total shoulder arthroplasty (RTSA) in patients with cuff tear arthropathy. This study assessed the outcomes of 2 RTSA designs. METHODS: Sixty-eight consecutive cuff tear arthropathy patients (74 shoulders) with a follow-up of at least 24 months received a Grammont or an onlay curved short-stem humeral component, with or without glenoid lateralization; a cementless humeral stem was implanted in >90%. Clinical outcome measures included active range of motion (anterior and lateral elevation, external and internal rotation), pain, and the Constant-Murley score. Radiologic outcomes included radiolucency, condensation lines, cortical thinning, spot weld, loosening and subsidence, and tuberosity resorption for the humeral component and radiolucency, scapular notching, formation of scapular bone spurs, ossifications, and loosening for the glenoid component. RESULTS: Both prostheses provided significant differences between preoperative and postoperative scores and showed a similar complication rate. Scapular fractures were found only in the patients who received the curved short-stem implant. Glenoid bone grafting did not significantly affect clinical scores. Both implants provided similar postoperative shoulder mobility, even though the lateralized curved stem was associated with higher delta scores for external rotation (P = .002) and lower rates of scapular notching (P = .0003), glenoid radiolucency (P = .016), and humeral bone remodeling (P = .004 and P = .030 for cortical thinning and spot weld, respectively). CONCLUSIONS: Medialized and short-stem lateralized RTSA implants provided similar midterm clinical outcomes and range of motion. The curved short stem was associated with higher delta scores for external rotation and a lower rate of radiographic risk factors.

Comparison of shoulder replacement to treat osteoarthritis secondary to instability surgery and primary osteoarthritis: a retrospective controlled study of patient outcomes.

PURPOSE: We hypothesized that osteoarthritis developing after instability surgery is radiographically similar to primary arthritis and that arthroplasty provides comparable outcomes in patients with these two types of osteoarthritis. METHODS: Patients with osteoarthritis due to instability surgery (group I) and with primary osteoarthritis (group II) were included. Mean follow-up was 52.6 and 41.6 months, respectively. Hemiarthroplasties (HA) were 32% in group I and 27% in group II; total shoulder arthroplasties (TSA) were 68 and 73% respectively. Outcome measures included active shoulder mobility (anterior elevation [AAE], lateral elevation [ALE], external rotation [ER], and internal rotation [IR]), pain, Constant-Murley score, and Simple Shoulder Test. Pre-operative and post-operative radiographs were taken. Glenoid arthritis was assessed by computed tomography. RESULTS: Participants were 19 in the group I (mean age 44.5 years, 12 males, 7 females) and 30 in the group II (mean age 48.2 years, 28 males, 12 females). Both patient groups had pre-operative concentric arthritis. Group II had higher rates of A2 and B1 glenoids (p = 0.003). A longer interval from stabilization to replacement was associated with lower post-operative IR (p = 0.017) and ALE (p = 0.035). Post-operative ER and IR were higher in group I (p < 0.001 and p = 0.001, respectively). In group I, AFE and ALE were higher in HA than TSA patients (both p = 0.009). The CS and SST score increased significantly in both groups (both p < 0.001). Group II showed significantly greater humeral radiolucency (p = 0.025) and a higher rate of TSA revision to reverse prostheses compared with group I. CONCLUSIONS: Shoulder replacement provides similar clinical and radiographic outcomes in arthritis secondary to instability surgery and in primary osteoarthritis. Posterior glenoid wear is more common in primary osteoarthritis.