17 O-excess as a detector for co-extracted organics in vapor analyses of plant isotope signatures.

RATIONALE: The stable isotope compositions of hydrogen and oxygen in water (δ2 H and δ18 O values) have been widely used to investigate plant water sources, but traditional isotopic measurements of plant waters are expensive and labor intensive. Recent work with direct vapor equilibration (DVE) on laser spectroscopy has shown potential to side step limitations imposed by traditional methods. Here, we evaluate DVE analysis of plants with a focus on spectral contamination introduced by organic compounds. We present 17 O-excess as a way of quantifying organic compound interference in DVE. METHODS: We performed isotopic analysis using the δ2 H, δ18 O and δ17 O values of water on an Off-Axis Integrated Cavity Output Spectroscopy (IWA-45EP OA-ICOS) instrument in vapor mode. We used a set of methanol (MeOH) and ethanol (EtOH) solutions to assess errors in isotope measurements. We evaluated how organic compounds affect the 17 O-excess. DVE was used to measure the isotopic signatures in natural plant material from Pinus banksiana, Picea mariana, and Larix laricina, and soil from boreal forest for comparison with solutions. RESULTS: The 17 O-excess was sensitive to the presence of organic compounds in water. 17 O-excess changed proportionally to the concentration of MeOH per volume of water, resulting in positive values, while EtOH solutions resulted in smaller changes in the 17 O-excess. Soil samples did not show any spectral contamination. Plant samples were spectrally contaminated on the narrow-band and were enriched in 1 H and 16 O compared with source water. L. laricina was the only species that did not show any evidence of spectral contamination. Xylem samples that were spectrally contaminated had positive 17 O-excess values. CONCLUSIONS: 17 O-excess can be a useful tool to identify spectral contamination and improve DVE plant and soil analysis in the laboratory and in situ. The 17 O-excess flagged the presence of MeOH and EtOH. Adding measurement of δ17 O values to traditional measurement of δ2 H and δ18 O values may shed new light on plant water analysis for source mixing dynamics using DVE.

A comparison of extraction systems for plant water stable isotope analysis.

RATIONALE: The stable isotope ratios of water (δ2 H and δ18 O values) have been widely used to trace water in plants in a variety of physiological, ecohydrological, biogeochemical and hydrological studies. In such work, the analyte must first be extracted from samples, prior to isotopic analysis. While cryogenic vacuum distillation is currently the most widely used method reported in the literature, a variety of extraction-collection-analysis methods exist. A formal inter-method comparison on plant tissues has yet to be carried out. METHODS: We performed an inter-method comparison of six plant water extraction techniques: direct vapour equilibration, microwave extraction, two unique versions of cryogenic vacuum distillation, centrifugation, and high-pressure mechanical squeezing. These methods were applied to four isotopically unique plant portions (head, stem, leaf, and root crown) of spring wheat (Triticum aestivum L.). Extracted plant water was analyzed via spectrometric (OA-ICOS) and mass-based (IRMS) analysis systems when possible. Spring wheat was grown under controlled conditions with irrigation inputs of a known isotopic composition. RESULTS: The tested methods of extraction yielded markedly different isotopic signatures. Centrifugation, microwave extraction, direct vapour equilibration, and high-pressure mechanical squeezing produced water more enriched in 2 H and 18 O content. Both cryogenic vacuum distillation systems and the high-pressure mechanical squeezing method produced water more depleted in 2 H and 18 O content, depending upon the plant portion extracted. The various methods also produced differing concentrations of co-extracted organic compounds, depending on the mode of extraction. Overall, the direct vapor equilibration method outperformed all other methods. CONCLUSIONS: Despite its popularity, cryogenic vacuum distillation was outperformed by the direct vapor equilibration method in terms of limited co-extraction of volatile organic compounds, rapid sample throughput, and near instantaneous returned stable isotope results. More research is now needed with other plant species, especially woody plants, to see how far the findings from this study could be extended.

An evaluation of materials and methods for vapour measurement of the isotopic composition of pore water in deep, unsaturated zones.

The development of in situ vapour sampling methods to measure δ(2)H and δ(18)O in pore water of deep, unsaturated soil profiles, including mine tailings and waste rock, is required to improve our ability to track water migration through these deposits. To develop appropriate field sampling methods, a laboratory study was first undertaken to evaluate potential materials and sampling methods to collect and analyse vapour samples from unsaturated mine waste. Field methods were developed based on these findings and tested at two mine sites using either on-site analyses with a portable isotope laser spectrometer or sample collection and storage prior to laboratory analyses. The field sites included a series of deep (>50 m) multiport profiles within a coal waste rock dump and open wells installed in a sand tailings dyke at an oil sands mine. Laboratory results show that memory effects in sample bags and tubing require 3-5 pore volumes of vapour flushing prior to sample collection and sample storage times are limited to 24 h. Field sampling highlighted a number of challenges including the need to correct for sample humidity and in situ temperature. Best results were obtained when a portable laser spectrometer was used to measure vapour samples in situ.

Microbial community composition is consistent across anaerobic digesters processing wheat-based fuel ethanol waste streams.

Biochemical methane potential (BMP) assays were conducted on byproducts from dry-grind wheat-based ethanol plants amended with feedlot manure at two input ratios. Whole stillage (WST), thin stillage (TST) and wet cake (WCK) were tested alone and with 1:1 and 2:1 ratios (VS basis) of byproduct:feedlot manure in bench-scale batch reactors. The addition of manure increased both the rate and consistency of methane production in triplicate reactors. In addition, digesters co-digesting thin stillage and cattle manure at 1:1 and 2:1 stillage:manure produced 125% and 119% expected methane based on the biomethane potential of each substrate digested individually. Bacterial community analysis using universal target amplification and pyrosequencing indicated there was a numerically dominant core of 42 bacteria that was universally present in the reactors regardless of input material. A smaller-scale analysis of the archaeal community showed that both hydrogenotrophic and acetoclastic methanogens were present in significant quantities.