An electric molecular motor.

Macroscopic electric motors continue to have a large impact on almost every aspect of modern society. Consequently, the effort towards developing molecular motors1-3 that can be driven by electricity could not be more timely. Here we describe an electric molecular motor based on a [3]catenane4,5, in which two cyclobis(paraquat-p-phenylene)6 (CBPQT4+) rings are powered by electricity in solution to circumrotate unidirectionally around a 50-membered loop. The constitution of the loop ensures that both rings undergo highly (85%) unidirectional movement under the guidance of a flashing energy ratchet7,8, whereas the interactions between the two rings give rise to a two-dimensional potential energy surface (PES) similar to that shown by FOF1 ATP synthase9. The unidirectionality is powered by an oscillating10 voltage11,12 or external modulation of the redox potential13. Initially, we focused our attention on the homologous [2]catenane, only to find that the kinetic asymmetry was insufficient to support unidirectional movement of the sole ring. Accordingly, we incorporated a second CBPQT4+ ring to provide further symmetry breaking by interactions between the two mobile rings. This demonstration of electrically driven continual circumrotatory motion of two rings around a loop in a [3]catenane is free from the production of waste products and represents an important step towards surface-bound14 electric molecular motors.

Electron-catalysed molecular recognition.

Molecular recognition1-4 and supramolecular assembly5-8 cover a broad spectrum9-11 of non-covalently orchestrated phenomena between molecules. Catalysis12 of such processes, however, unlike that for the formation of covalent bonds, is limited to approaches13-16 that rely on sophisticated catalyst design. Here we establish a simple and versatile strategy to facilitate molecular recognition by extending electron catalysis17, which is widely applied18-21 in synthetic covalent chemistry, into the realm of supramolecular non-covalent chemistry. As a proof of principle, we show that the formation of a trisradical complex22 between a macrocyclic host and a dumbbell-shaped guest-a molecular recognition process that is kinetically forbidden under ambient conditions-can be accelerated substantially on the addition of catalytic amounts of a chemical electron source. It is, therefore, electrochemically possible to control23 the molecular recognition temporally and produce a nearly arbitrary molar ratio between the substrates and complexes ranging between zero and the equilibrium value. Such kinetically stable supramolecular systems24 are difficult to obtain precisely by other means. The use of the electron as a catalyst in molecular recognition will inspire chemists and biologists to explore strategies that can be used to fine-tune non-covalent events, control assembly at different length scales25-27 and ultimately create new forms of complex matter28-30.

Syntheses of three-dimensional catenanes under kinetic control.

Although catenanes comprising two ring-shaped components can be made in large quantities by templation, the preparation of three-dimensional (3D) catenanes with cage-shaped components is still in its infancy. Here, we report the design and syntheses of two 3D catenanes by a sequence of SN2 reactions in one pot. The resulting triply mechanically interlocked molecules were fully characterized in both the solution and solid states. Mechanistic studies have revealed that a suit[3]ane, which contains a threefold symmetric cage component as the suit and a tribromide component as the body, is formed at elevated temperatures. This suit[3]ane was identified as the key reactive intermediate for the selective formation of the two 3D catenanes which do not represent thermodynamic minima. We foresee a future in which this particular synthetic strategy guides the rational design and production of mechanically interlocked molecules under kinetic control.

Spin-Frustrated Trisradical Trication of PrismCage.

Organic trisradicals featuring threefold symmetry have attracted significant interest because of their unique magnetic properties associated with spin frustration. Herein, we describe the synthesis and characterization of a triangular prism-shaped organic cage for which we have coined the name PrismCage6+ and its trisradical trication─TR3(•+). PrismCage6+ is composed of three 4,4'-bipyridinium dications and two 1,3,5-phenylene units bridged by six methylene groups. In the solid state, PrismCage6+ adopts a highly twisted conformation with close to C3 symmetry as a result of encapsulating one PF6- anion as a guest. PrismCage6+ undergoes stepwise reduction to its mono-, di-, and trisradical cations in MeCN on account of strong electronic communication between its 4,4'-bipyridinium units. TR3(•+), which is obtained by the reduction of PrismCage6+ employing CoCp2, adopts a triangular prism-shaped conformation with close to C2v symmetry in the solid state. Temperature-dependent continuous-wave and nutation-frequency-selective electron paramagnetic resonance spectra of TR3(•+) in frozen N,N-dimethylformamide indicate its doublet ground state. The doublet-quartet energy gap of TR3(•+) is estimated to be -0.08 kcal mol-1, and the critical temperature of spin-state conversion is found to be ca. 50 K, suggesting that it displays pronounced spin frustration at the molecular level. To the best of our knowledge, this example is the first organic radical cage to exhibit spin frustration. The trisradical trication of PrismCage6+ opens up new possibilities for fundamental investigations and potential applications in the fields of both organic cages and spin chemistry.

Precise Non-Equilibrium Polypropylene Glycol Polyrotaxanes.

Traditionally, the synthesis of polyrotaxanes has been limited by synthetic methods that rely on an innate affinity between the rings and the polymer chains. The use of rotaxane-forming molecular pumps allows this limitation to be circumvented in the production of non-equilibrium polyrotaxanes in which rings are trapped on polymer chains for which they have little or no affinity. Pumping cassettes, each composed of a bipyridinium unit linked (i) by a bismethylene bridge to a terminal 2,6-dimethylpyridinium cationic unit and (ii) by a methylene group to an isopropylphenylene steric barrier, were attached using copper-catalyzed azide-alkyne cycloadditions to the ends of a polypropylene glycol (PPG) chain of number-average molecular weight Mn ≈ 2200. Using a one-pot electrosynthetic protocol, a series of PPG-based polyrotaxanes with cyclobis(paraquat-p-phenylene) as the rings were synthesized. Despite the steric bulk of the PPG backbone, it was found to be a suitable collecting chain for threading up to 10 rings. The pumping of two rings is sufficient to render these hydrophobic polymers soluble in aqueous solution. Their hydrodynamic diameters and diffusion constants vary according to the number of pumped rings. The non-equilibrium nature of these polyrotaxanes is manifested in their gradual degradation and dethreading at elevated temperatures.

Fluorescence Quenching by Redox Molecular Pumping.

Artificial molecular pumps (AMPs), inspired by the active cellular transport exhibited in biological systems, enable cargoes to undergo unidirectional motion, courtesy of molecular ratchet mechanisms in the presence of energy sources. Significant progress has been achieved, using alternatively radical interactions and Coulombic repulsive forces to create working AMPs. In an attempt to widen the range of these AMPs, we have explored the effect of molecular pumping on the photophysical properties of a collecting chain on a dumbbell incorporating a centrally located pyrene fluorophore and two terminal pumping cassettes. The AMP discussed here sequesters two tetracationic cyclophanes from the solution, generating a [3]rotaxane in which the fluorescence of the dumbbell is quenched. The research reported in this Article demonstrates that the use of pumping cassettes allows us to generate the [3]rotaxane in which the photophysical properties of fluorophores can be modified in a manner that cannot be achieved with a mixture of the dumbbell and ring components of the rotaxane on account of their weak binding in solution.

Mechanical Bond-Assisted Full-Spectrum Investigation of Radical Interactions.

Molecular recognition, based on noncovalent bonding interactions, plays a central role in directing supramolecular phenomena in both chemical and biological environments. The identification and investigation of weakly associated recognition motifs, however, remains a major challenge, especially when the motifs are interlinked with and obscured by other robust binding modes in complicated systems. For example, although the host-guest recognition between the radical cations of both cyclobis(paraquat-p-phenylene) (CBPQT) and 4,4'-bipyridinium (BIPY) salts has been thoroughly investigated, the question of whether other binding modes exist between these two positively charged entities is the subject of some debate because of the complexity and dynamic nature of this supramolecular system. In order to address this conundrum, we have synthesized a [2]catenane─formed by mechanical interlocking between CBPQT and another BIPY-containing ring─which enhances the weak interactions between components and reduces significantly the complexity of the system for easier characterization. By employing this [2]catenane as a model compound, we have performed a full-spectrum investigation of radical interactions and revealed unambiguously a total of three possible binding modes between CBPQT and BIPY─to be specific, a bisradical tetracationic, a trisradical tricationic, and a bisradical dicationic association─as demonstrated by various methods of characterization including UV/vis/NIR, EPR, and NMR spectroscopies, electrochemical measurements and X-ray crystallography. The two newly discovered bisradical binding modes have potential applications in the construction of self-assembled materials and in mediating supramolecular catalysis. The mechanical bond-assisted approach used in this research is broadly applicable to investigating noncovalent bonding interactions.

PCage: Fluorescent Molecular Temples for Binding Sugars in Water.

The development of synthetic receptors that recognize carbohydrates in water with high selectivity and specificity is challenging on account of their structural complexity and strong hydrophilicity. Here, we report on the design and synthesis of two pyrene-based, temple-shaped receptors for the recognition of a range of common sugars in water. These receptors rely on the use of two parallel pyrene panels, which serve as roofs and floors, capable of forming multiple [C-H···π] interactions with the axially oriented C-H bonds on glycopyranosyl rings in the carbohydrate-based substrates. In addition, eight polarized pyridinium C-H bonds, projecting from the roofs and floors of the temple receptors toward the binding cavities, form [C-H···O] hydrogen bonds, with the equatorially oriented OH groups on the sugars located inside the hydrophobic cavities. Four para-xylylene pillars play a crucial role in controlling the distance between the roof and floor. These temple receptors are highly selective for the binding of glucose and its derivatives. Furthermore, they show enhanced fluorescence upon binding with glucose in water, a property which is useful for glucose-sensing in aqueous solution.

A Donor-Acceptor [2]Catenane for Visible Light Photocatalysis.

Colored charge-transfer complexes can be formed by the association between electron-rich donor and electron-deficient acceptor molecules, bringing about the narrowing of HOMO-LUMO energy gaps so that they become capable of harnessing visible light. In an effort to facilitate the use of these widespread, but nonetheless weak, interactions for visible light photocatalysis, it is important to render the interactions strong and robust. Herein, we employ a well-known donor-acceptor [2]catenane-formed by the mechanical interlocking of cyclobis(paraquat-p-phenylene) and 1,5-dinaphtho[38]crown-10-in which the charge-transfer interactions between two 4,4'-bipyridinium and two 1,5-dioxynaphthalene units are enhanced by mechanical bonding, leading to increased absorption of visible light, even at low concentrations in solution. As a result, since this [2]catenane can generate persistent bipyridinium radical cations under continuous visible-light irradiation without the need for additional photosensitizers, it can display good catalytic activity in both photo-reductions and -oxidations, as demonstrated by hydrogen production-in the presence of platinum nanoparticles-and aerobic oxidation of organic sulfides, such as l-methionine, respectively. This research, which highlights the usefulness of nanoconfinement present in mechanically interlocked molecules for the reinforcement of weak interactions, can not only expand the potential of charge-transfer interactions in solar energy conversion and synthetic photocatalysis but also open up new possibilities for the development of active artificial molecular shuttles, switches, and machines.

Electron-Catalyzed Dehydrogenation in a Single-Molecule Junction.

Investigating how electrons propagate through a single molecule is one of the missions of molecular electronics. Electrons, however, are also efficient catalysts for conducting radical reactions, a property that is often overlooked by chemists. Special attention should be paid to electron catalysis when interpreting single-molecule conductance results for the simple reason that an unexpected reaction mediated or triggered by electrons might take place in the single-molecule junction. Here, we describe a counterintuitive structure-property relationship that molecules, both linear and cyclic, employing a saturated bipyridinium-ethane backbone, display a similar conductance signature when compared to junctions formed with molecules containing conjugated bipyridinium-ethene backbones. We describe an ethane-to-ethene transformation, which proceeds in the single-molecule junction by an electron-catalyzed dehydrogenation. Electrochemically based ensemble experiments and theoretical calculations have revealed that the electrons trigger the redox process, and the electric field promotes the dehydrogenation. This finding not only demonstrates the importance of electron catalysis when interpreting experimental results, but also charts a pathway to gaining more insight into the mechanism of electrocatalytic hydrogen production at the single-molecule level.

Artificial Molecular Pump Operating in Response to Electricity and Light.

The ability to control the relative motions of component parts in molecules is essential for the development of molecular nanotechnology. The advent of mechanically interlocked molecules (MIMs) has enhanced significantly the opportunities for chemists to harness such motions in artificial molecular machines (AMMs). Recently, we have developed artificial molecular pumps (AMPs) capable of producing highly energetic oligo- and polyrotaxanes with high precision. Here, we report the design, synthesis, and operation of an AMP incorporating a photocleavable stopper that allows for the use of orthogonal stimuli. Our approach employs a ratchet mechanism to pump a ring onto a collecting chain, forming an intermediate [2]rotaxane. At a subsequent time, application of light triggers the release of the ring back into the bulk solution with temporal control. This process is monitored by the quenching of the fluorescence of a naphthalene-based fluorophore. This design may find application in the fabrication of molecular transporting systems with on-demand functions.

TetrazineBox: A Structurally Transformative Toolbox.

Synthetic macrocycles capable of undergoing allosteric regulation by responding to versatile external stimuli are the subject of increasing attention in supramolecular science. Herein, we report a structurally transformative tetracationic cyclophane containing two 3,6-bis(4-pyridyl)-l,2,4,5-tetrazine (4-bptz) units, which are linked together by two p-xylylene bridges. The cyclophane, which possesses modular redox states and structural post-modifications, can undergo two reversibly consecutive two-electron reductions, affording first its bisradical dicationic counterpart, and then subsequently the fully reduced species. Furthermore, one single-parent cyclophane can afford effectively three other new analogs through box-to-box cascade transformations, taking advantage of either reductions or an inverse electron-demand Diels-Alder (IEDDA) reaction. While all four new tetracationic cyclophanes adopt rigid and symmetric box-like conformations, their geometries in relation to size, shape, electronic properties, and binding affinities toward polycyclic aromatic hydrocarbons can be readily regulated. This structurally transformative tetracationic cyclophane performs a variety of new tasks as a result of structural post-modifications, thus serving as a toolbox for probing the radical properties and generating rapidly a range of structurally diverse cyclophanes by efficient divergent syntheses. This research lays a solid foundation for the introduction of the structurally transformative tetracationic cyclophane into the realm of mechanically interlocked molecules and will provide a toolbox to construct and operate intelligent molecular machines.

Molecular-Pump-Enabled Synthesis of a Daisy Chain Polymer.

The assembly of a kinetically trapped daisy chain polymer under redox control has been achieved with a self-complementary monomer using an energy ratchet mechanism. The monomer is composed of a molecular pump at one end and a cyclobis(paraquat-p-phenylene) (CBPQT4+) ring at the other end. The pump and ring are linked together by a long collecting chain. When the monomer is reduced to its radical state, it self-assembles into a supramolecular daisy chain polymer on account of radical-pairing interactions. When all of the bipyridinium radical cations are quickly oxidized to dications, the CBPQT4+ rings are forced to thread onto the collecting chains, forming an out-of-equilibrium, kinetically trapped daisy chain polymer. This polymer can be switched reversibly back to the supramolecular polymer by reduction, followed by depolymerization to afford the monomer as a result of slow oxidation. This proof-of-concept investigation opens up opportunities for synthesizing mechanically interlocked polymers using molecular machines.

Highly Stable Organic Bisradicals Protected by Mechanical Bonds.

Two new highly charged [2]catenanes-namely, mHe[2]C·6PF6 and mHo[2]C·6PF6-were synthesized by exploiting radical host-guest templation between derivatives containing BIPY•+ radical cations and the meta analogue of cyclobis(paraquat-p-phenylene). In contrast to related [2]catenanes that have been isolated as air-stable monoradicals, both mHe[2]C·6PF6 and mHo[2]C·6PF6 exist as air-stable singlet bisradicals, as evidenced by both X-ray crystallography in the solid state and EPR spectroscopy in solution. Electrochemical studies indicate that the first two reduction peaks of these two [2]catenanes are shifted significantly to more positive potentials, a feature which is responsible for their extraordinary stability in air. The mixed-valence nature of the mono- and bisradical states endows them with unique NIR absorption properties, e.g., NIR absorption bands for the mono- and bisradical states observed at ∼1800 and ∼1450 nm, respectively. These [2]catenanes are potentially useful in applications that include NIR photothermal conversion, UV-vis-NIR multiple-state electrochromic materials, and multiple-state memory devices. Our findings highlight the principle of "mechanical-bond-induced stabilization" as an efficient strategy for designing persistent organic radicals.

Organic Counteranion Co-assembly Strategy for the Formation of γ-Cyclodextrin-Containing Hybrid Frameworks.

A class of γ-cyclodextrin-containing hybrid frameworks (CD-HFs) has been synthesized, employing γ-cyclodextrin (γ-CD) as the primary building blocks, along with 4-methoxysalicylate (4-MS-) anions as the secondary building blocks. CD-HFs are constructed through the synergistic exploitation of coordinative, electrostatic, and dispersive forces. The syntheses have been carried out using an organic counteranion co-assembly strategy, which allows for the introduction of 4-MS-, in place of inorganic OH-, into the cationic γ-CD-containing metal-organic frameworks (CD-MOFs). Although the packing arrangement of the γ-CD tori in the solid-state superstructure of CD-HFs is identical to that of the previously reported CD-MOFs, CD-HFs crystallize with lower symmetry and in the cuboid space group P43212-when compared to CD-MOF-1, which has the cubic unit cell of I432 space group-on account of the chiral packing of the 4-MS- anions in the CD-HF superstructures. Importantly, CD-HFs have ultramicroporous apertures associated with the pore channels, a significant deviation from CD-MOF-1, as a consequence of the contribution from the 4-MS- anions, which serve as supramolecular baffles. In gas adsorption-desorption experiments, CD-HF-1 exhibits a Brunauer-Emmett-Teller (BET) surface area of 306 m2 g-1 for CO2 at 195 K, yet does not uptake N2 at 77 K, confirming the difference in porosity between CD-HF-1 and CD-MOF-1. Furthermore, the 4-MS- anions in CD-HF-1 can be exchanged with OH- anions, leading to an irreversible single-crystal to single-crystal transformation, with rearrangement of coordinated metal ions. Reversible transformations were also observed in CD-MOF-1 when OH- ions were exchanged for 4-MS- anions, with the space group changing from I432 to R32. This organic counteranion co-assembly strategy opens up new routes for the construction of hybrid frameworks, which are inaccessible by existing de novo MOF assembly methodologies.

Single-Crystal Polycationic Polymers Obtained by Single-Crystal-to-Single-Crystal Photopolymerization.

The efficient preparation of single-crystalline ionic polymers and fundamental understanding of their structure-property relationships at the molecular level remains a challenge in chemistry and materials science. Here, we describe the single-crystal structure of a highly ordered polycationic polymer (polyelectrolyte) and its proton conductivity. The polyelectrolyte single crystals can be prepared on a gram-scale in quantitative yield, by taking advantage of an ultraviolet/sunlight-induced topochemical polymerization, from a tricationic monomer-a self-complementary building block possessing a preorganized conformation. A single-crystal-to-single-crystal photopolymerization was revealed unambiguously by in situ single-crystal X-ray diffraction analysis, which was also employed to follow the progression of molecular structure from the monomer, to a partially polymerized intermediate, and, finally, to the polymer itself. Collinear polymer chains are held together tightly by multiple Coulombic interactions involving counterions to form two-dimensional lamellar sheets (1 nm in height) with sub-nanometer pores (5 Å). The polymer is extremely stable under 254 nm light irradiation and high temperature (above 500 K). The extraordinary mechanical strength and environmental stability-in combination with its impressive proton conductivity (∼3 × 10-4 S cm-1)-endow the polymer with potential applications as a robust proton-conducting material. By marrying supramolecular chemistry with macromolecular science, the outcome represents a major step toward the controlled synthesis of single-crystalline polyelectrolyte materials with perfect tacticity.

Stabilizing the Naphthalenediimide Radical within a Tetracationic Cyclophane.

Organic radicals are of importance in developing smart materials that have paramagnetic and/or near-infrared optical properties. Their practical applications, however, are limited by the labile nature of the radicals. Here, we demonstrate that by using a tetracationic cyclophane, namely, cyclobis(4,4'-(1,4-phenylene)bispyridine-p-phenylene) (ExBox4+), to encapsulate a naphthalenediimide (NDI) guest, the redox properties of NDI can be modulated. In organic solvents such as MeCN or DMF, ExBox4+ is able to provide the surrounding Coulombic attraction to the NDI•- radical anion and therefore enhance its stability toward oxidation. In water, NDI•- is prone to dimerization, forming its (NDI•-)2 dimer. Under UV-light irradiation, the (NDI•-)2 dimer is observed to disproportionate and yield the dianionic NDI2-. ExBox4+ is able to encapsulate the NDI•- radical anion and prevent its dimerization, and as a consequence, the radical anion is protected from further reduction in a noncovalent manner. We believe that our strategy of modulating the redox properties of NDI by either host-guest recognition or mechanical interlocking can aid and abet the development of radical-based materials, which could be employed in pursuit of applications in many areas, such as transporting spin and charges.

Photostable Helical Polyfurans.

This report describes the design and synthesis of a new class of polyfurans bearing ester side chains. The macromolecules can be synthesized using catalyst-transfer polycondensation, providing precise control over molecular weight and molecular weight distribution. Such obtained furan ester polymers are significantly more photostable than their alkyl analogues owing to the electron-withdrawing nature of the attached subunit. Most interestingly, they spontaneously fold into a compact π-stacked helix, yielding a complex multilayer cylindrical nanoparticle with a hollow, rigid, conjugated core composed of the polyfuran backbone and a soft, insulating outer layer formed by the ester side chains. The length of polymer side chains dictates the outer diameter of such nanoparticles, which for the hexyl ester groups used in the present study is equal to ∼2.3 nm. The inner cavity of the conjugated core is lined with oxygen atoms, which set its effective diameter to 0.4 nm. Furthermore, installation of bulkier, branched chiral ester side chains on the repeat unit yields structures that, upon change of solvent, can reversibly transition between an ordered chiral helical folded and disordered unfolded state.

A Molecular Dual Pump.

Artificial molecular machines (AMMs) built from mechanically interlocked molecules (MIMs) can use energy ratchets to control the unidirectional motion of their component parts. These energy ratchets are operated by the alteration of kinetic barriers and thermodynamic wells, which are, in turn, determined by the switching on and off of noncovalent interactions. Previously, we have developed artificial molecular pumps (AMPs) capable of pumping rings consecutively onto a collecting chain as part of a molecular dumbbell, leading to the formation of rotaxanes. Here, we report a molecular dual pump (MDP) consisting of two individual AMPs linked in a head-to-tail fashion, wherein a single ring is pumped, in a linear manner, on and off a dumbbell involving a [2]rotaxane intermediate by exploiting the redox properties of the two pumps. This MDP, defined by the finely tuned noncovalent interactions and fueled by either chemicals or electricity, utilizes an energy ratchet mechanism to capture a ring and subsequently release it back into solution. The unidirectional motion and the resulting controlled capture and release of the ring were followed by 1D and 2D 1H NMR spectroscopy and supported by control experiments. This molecular dual pump may be considered to be a forerunner of AMMs that are capable of pumping rings across a membrane in a way similar to how bacteriorhodopsin transports protons from one side of a membrane to the other under the influence of light. Such extensive multicomponent AMMs can lead potentially to molecular transporting platforms with positional and directional control of cargo uptake and release when, and only when, instructed.

Selective Extraction of C70 by a Tetragonal Prismatic Porphyrin Cage.

Along with the advent of supramolecular chemistry, research on fullerene receptors based on noncovalent bonding interactions has attracted a lot of attention. Here, we present the design and synthesis of a cationic molecular cage: a cyclophane composed of two tetraphenylporphyrins, bridged face-to-face by four viologen units in a rhomboid prismatic manner. The large cavity inside the cage, as well as the favorable donor-acceptor interactions between the porphyrin panels and the fullerene guests, enables the cage to be an excellent fullerene receptor. The 1:1 host-guest complexes formed between the cage and both C60 and C70 were characterized in solution by HRMS and NMR, UV-vis and fluorescence spectroscopies, and confirmed in the solid state by single-crystal X-ray diffraction analyses. The results from solution studies reveal that the cage has a much stronger binding for C70 than for C60, resulting in a selective extraction of C70 from a C60-enriched fullerene mixture (C60/C70 = 10/1), demonstrating the potential of the cage as an attractive receptor for fullerene separation.