Amputation of Remazol brilliant blue dye on crosslinked chitosan hydrogel: Statistical treatment and experimental evaluation.

The primary aim of this research is to comprehensively assess the applicability of chitosan biopolymer towards water treatment application and to enhance its adsorption capacity towards Remazol brilliant blue R-19 dye. This has been achieved through physical modification to obtain the material in hydrogel form and chemical modification by crosslinking it with barbituric acid. The characterization of the resulting Chitosan-barbituric acid hydrogel (CBH) was carried out using various analytical techniques such as SEM-EDX, FT-IR, TGA-DTA, XRD, and BET. CBH was employed as the adsorbent to eliminate R-19 dye from aqueous media. Utilizing response surface methodology (RSM), the parameters were fine-tuned, leading to the achievement of more than a 95% removal for R-19 dye. The adsorption behavior closely adhered to the Langmuir isotherm and pseudo-second-order kinetics. An interesting observation indicated that the rise in temperature leads to rise in adsorption capacity of CBH. The maximum adsorption capacities evaluated at 301.15 K, 313.15 K, 318.15 K, and 323.15 K were 566.6 mg g-1, 624.7 mg g-1, 671.3 mg g-1, and 713.5 mg g-1 respectively, in accordance with the Langmuir isotherm model. Examining the thermodynamics of the adsorption process revealed its spontaneous nature (ΔG = -21.14 to -27.09 kJ mol-1) across the entire temperature range. Furthermore, the assessment of the isosteric heat of adsorption (ΔHads) was conducted using the Clausius-Clapeyron equation, with results indicating an increase in ΔHads from 1.85 to 2.16 kJ mol-1 with temperature rise from 301.15 K to 323.15 K due to augmented surface loading. This suggested the existence of lateral interactions between the adsorbed dye molecules. The potential of adsorbent for regeneration was investigated, demonstrating the ability to reuse the material. Sustainability parameter calculated for synthesis process reflected a notably low E-factor value of 0.32 demonstrated the synthesis is environment friendly.

A novel chitosan-glutamic acid membrane for multi-pollutant amputation: Investigational and RSM optimizations.

The novel glutamic acid crosslinked chitosan membrane (CsG) was fabricated and tested for its adsorption capabilities for the removal of multiple pollutants like Cr (VI), cyanide, fluoride and diclofenac sodium from wastewater. This fabricated CsG membrane was characterized by various techniques like FT-IR, SEM, EDX and XRD, BET to assess its structural, compositional and morphological properties. The working parameters studied by batch experiments were solution pH, CsG dose, contact time, pollutant concentration and solution temperature. The CsG membrane exhibited maximum adsorption capacity of 410.7 mg/g, 310.2 mg/g, 14.3 mg/g, 132.7 mg/g for Cr (VI), cyanide, fluoride and diclofenac respectively. The validation of the operational parameters was performed by Response Surface Methodology (RSM). The experimental data fitted well with Langmuir isotherm model and followed pseudo second order kinetics for all the four targeted contaminants. The spontaneity of the process was checked by thermodynamics studies. The high partition coefficients of 7669 L/kg Cr(VI), 23,309 L/kg (CN-), 649 L/kg (F-) and 2613 L/kg (DFC) are the indicators of excellent attractive interaction between CsG membrane and target toxicants. The CsG membrane showed efficient regenerative adsorption properties up to 5 adsorption-desorption cycles. Overall, the developed novel CsG membrane promised as an effective material for the removal of multiple number of pollutants from water.