Effects of CB1R inverse agonist, INV-202, in patients with features of metabolic syndrome. A randomized, placebo-controlled, double-blind phase 1b study.

AIMS: To evaluate the clinical safety, tolerability, and pharmacokinetic and pharmacodynamic profile of the novel cannabinoid receptor-1 (CB1R) inverse agonist, INV-202, in adults with features of metabolic syndrome. MATERIALS AND METHODS: This was a multicentre, randomized, double-blind, placebo-controlled, 28-day repeat-dose (INV-202 [25 mg] or placebo, once-daily oral tablet), parallel-group study in 37 participants aged 18 to 65 years (46% female, mean age 55 years, glycated haemoglobin 5.7% [39 mmol/mol], body mass index [BMI] 38.1 kg/m2 ) with features of metabolic syndrome and glucose intolerance. An oral glucose tolerance test (OGTT) was performed at baseline and at the end of the study. Lipid profiles, weight, waist circumference and biomarkers were assessed weekly. Statistical comparisons were performed post hoc. RESULTS: INV-202 was well tolerated with no serious or severe treatment-emergent adverse events; the most common events related to known effects of CB1R blockade in the gastrointestinal tract. INV-202 produced a significant mean weight loss of 3.5 kg (3.3% compared with placebo participants who gained a mean 0.6 kg [0.5%]). INV-202 also exhibited significant reductions in waist circumference and BMI (P ≤ 0.03). There was no significant difference in OGTT 0- to 3-hour area under the curve for INV-202 versus placebo: least squares mean 29.38 versus 30.25 h*mmol/L, with an INV-202: placebo ratio of 97.1% (95% confidence interval 90.2, 105.6; P = 0.43). CONCLUSIONS: INV-202 was well tolerated, producing a signal for rapid weight loss with improvements in other metabolic syndrome markers in this population. These findings support further exploration and long-term assessment of cardiometabolic effects.

Pentamidine blocks hepatotoxic injury in mice.

Toxin-induced liver diseases lack effective therapies despite increased understanding of the role factors such as an overactive innate immune response play in the pathogenesis of this form of hepatic injury. Pentamidine is an effective antimicrobial agent against several human pathogens, but studies have also suggested that this drug inhibits inflammation. This potential anti-inflammatory mechanism of action, together with the development of a new oral form of pentamidine isethionate VLX103, led to investigations of the effectiveness of this drug in the prevention and treatment of hepatotoxic liver injury. Pretreatment with a single injection of VLX103 in the d-galactosamine (GalN) and lipopolysaccharide (LPS) model of acute, fulminant liver injury dramatically decreased serum alanine aminotransferase levels, histological injury, the number of terminal deoxynucleotide transferase-mediated deoxyuridine triphosphate nick end-labeling (TUNEL)-positive cells and mortality compared with vehicle-injected controls. VLX103 decreased GalN/LPS induction of tumor necrosis factor (TNF) but had no effect on other proinflammatory cytokines. VLX103 prevented the proinflammatory activation of cultured hepatic macrophages and partially blocked liver injury from GalN/TNF. In GalN/LPS-treated mice, VLX103 decreased activation of both the mitochondrial death pathway and downstream effector caspases 3 and 7, which resulted from reduced c-Jun N-terminal kinase activation and initiator caspase 8 cleavage. Delaying VLX103 treatment for up to 3 hours after GalN/LPS administration was still remarkably effective in blocking liver injury in this model. Oral administration of VLX103 also decreased hepatotoxic injury in a second more chronic model of alcohol-induced liver injury, as demonstrated by decreased serum alanine and aspartate aminotransferase levels and numbers of TUNEL-positive cells. CONCLUSION: VLX103 effectively decreases toxin-induced liver injury in mice and may be an effective therapy for this and other forms of human liver disease. (Hepatology 2017;66:922-935).

A peripherally restricted cannabinoid-1 receptor inverse agonist promotes insulin secretion and protects from cytokine toxicity in human pancreatic islets.

The cannabinoid receptor CB1R is expressed in pancreatic ß-cells; CB1R increased activity is associated with diabetes, obesity, cardiovascular disorders as well as decreased insulin secretion and insulin resistance. CB1R was shown to signal through G-protein coupling as well as ß-arrestins in ß-cells. Peripherally restricted CB1R inverse agonists purportedly have beneficial effects on insulin secretion in ß-cells, without the unwanted effects in the central nervous system. Here we show that a peripherally restricted CB1R inverse agonist, MRI-1891, augments glucose stimulated insulin secretion in isolated human pancreatic islets and mouse islets. The insulin secretion enhancing effect of MRI-1891 is comparable to exendin-4, an analogue of the glucagon like peptide-1 (GLP1). Moreover, MRI-1891 treatment protects isolated human islet cells against cytokine-induced apoptosis, similar to exendin-4. Thus, MRI-1891, a new class of CB1R inverse agonist, may be considered a potential therapeutic for both type 1 and type 2 diabetes because of its ability to protect pancreatic ß-cells from cytokine toxicity and to promote insulin secretion.

In vitro and in vivo pharmacokinetic characterization, chiral conversion and PBPK scaling towards human PK simulation of S-MRI-1867, a drug candidate for Hermansky-Pudlak syndrome pulmonary fibrosis.

Hermansky-Pudlak syndrome (HPS) is a rare autosomal recessive disorder that affects lysosome-related organelles, often leading to fatal pulmonary fibrosis (PF). The search for a treatment for HPS pulmonary fibrosis (HPSPF) is ongoing. S-MRI-1867, a dual cannabinoid receptor 1 (CB1R)/inducible nitric oxide synthase (iNOS) inhibitor, has shown great promise for the treatment of several fibrotic diseases, including HPSPF. In this study, we investigated the in vitro ADME characteristics of S-MRI-1867, as well as its pharmacokinetic (PK) properties in mice, rats, dogs, and monkeys. S-MRI-1867 showed low aqueous solubility (< 1 µg/mL), high plasma protein binding (>99%), and moderate to high metabolic stability. In its preclinical PK studies, S-MRI-1867 exhibited moderate to low plasma clearance (CLp) and high steady-state volume of distribution (Vdss) across all species. Despite the low solubility and P-gp efflux, S-MRI-1867 showed great permeability and metabolic stability leading to a moderate bioavailability (21-60%) across mouse, rat, dog, and monkey. Since the R form of MRI-1867 is CB1R-inactive, we investigated the potential conversion of S-MRI-1867 to R-MRI-1867 in mice and found that the chiral conversion was negligible. Furthermore, we developed and validated a PBPK model that adequately fits the PK profiles of S-MRI-1867 in mice, rats, dogs, and monkeys using various dosing regimens. We employed this PBPK model to simulate the human PK profiles of S-MRI-1867, enabling us to inform human dose selection and support the advancement of this promising drug candidate in the treatment of HPSPF.

Membrane formation and drug loading effects in high amylose starch tablets studied by NMR imaging.

Cross-linked high amylose starch is used as an excipient in the preparation of pharmaceutical tablets for the sustained release of drugs. NMR imaging with contrast enhanced by proton density and by self-diffusion coefficient was used to follow the water uptake and swelling, two critical parameters controlling the drug release of the cross-linked starch tablets containing 10 wt % of ciprofloxacin and of acetaminophen, respectively. The drug-loaded tablets were studied in a H2O/D2O mixture at 37 degrees C in comparison to the tablets without any drug loading. The diffusion of water in the tablets all showed a Fickian behavior, but the kinetics of water uptake was faster in the case of the drug-loaded tablets. The formation of a membrane at the water/tablet interface was observed.

pH-responsive polymeric micelles of poly(ethylene glycol)-b-poly(alkyl(meth)acrylate-co-methacrylic acid): influence of the copolymer composition on self-assembling properties and release of candesartan cilexetil.

The objective of the present study was to investigate the influence of chemical structure and molecular weight of pH-sensitive block copolymers on their self-assembling properties, the loading and the release of candesartan cilexetil (CDN). Block copolymers of poly(ethylene glycol) and t-butyl methacrylate, iso-butyl acrylate, n-butyl acrylate or propyl methacrylate were synthesized by atom transfer radical polymerization. pH-sensitivity was obtained by hydrolysis of t-butyl groups. The poorly water-soluble drug CDN was incorporated in the micelles and the in vitro drug release was evaluated as a function of pH. The critical aggregation concentration of hydrolyzed copolymers (pK(a)=6.2-6.6) was higher compared to the unhydrolyzed ones. Dynamic light scattering studies and atomic force microscopy images revealed uniform size micelles with aggregation numbers ranging from 60 to 160. The entrapment efficiency of CDN was generally found to be above 90%, with drug loading levels reaching approximately 20% (w/w). Differential scanning calorimetry studies showed the amorphous nature of entrapped CDN. The release of CDN from pH-sensitive micelles was triggered upon an increase in pH from 1.2 to 7.2. These findings suggest that the PEG-b-poly(alkyl(meth)acrylate-co-methacrylic acid)s can self-assemble to form micelles which exhibit high loading capacities for CDN and release the drug in a pH-dependent fashion.

Poly(N-vinyl-pyrrolidone)-block-poly(D,L-lactide) as polymeric emulsifier for the preparation of biodegradable nanoparticles.

Poly(D,L-lactide) (PDLLA) amphiphilic block copolymers were employed as emulsifiers in the preparation of PDLLA nanoparticles by an oil/water emulsion solvent evaporation technique. The surface-active properties of poly(N-vinyl-pyrrolidone)-block-poly(D,L-lactide) (PVP-b-PDLLA) toward the biphasic system were compared to those of polyethylene glycol(PEG)-b-PDLLA of similar composition. PVP-b-PDLLA was found to be a suitable emulsifier for dichloromethane/water emulsions, yielding narrowly distributed nanoparticles (<250 nm) surrounded by a hydrophilic PVP corona. PEG-b-PDLLA, however, was only effective in producing appropriately sized nanoparticles when dichloromethane was replaced with ethyl acetate. Furthermore, the lyoprotectant properties of PVP allowed the freeze-dried nanoparticles to recover their initial size following reconstitution, while PEG-coated nanoparticles could not be redispersed following lyophilization. Two poorly water-soluble drugs, that is, paclitaxel and etoposide, were efficiently loaded into PVP-decorated PDLLA nanoparticles. The entrapment efficiency of etoposide was significantly enhanced by adding MgCl2 to the aqueous phase. It was found that the nanoparticles released the drugs progressively over several days in vitro. The obtained experimental results were corroborated with the theoretical compatibility between a given drug, polymer, and solvent, predicted by total solubility parameters.

Development of a liposome formulation for improved biodistribution and tumor accumulation of pentamidine for oncology applications.

Pentamidine isethionate, widely used for the treatment of parasitic infections, has shown strong anticancer activity in cancer cells and models of melanoma and lung cancer. Systemic administration of pentamidine is associated with serious toxicities, particularly renal, affecting as many as 95% of patients (O'Brien et al., 1997). This work presents the development of a liposome pentamidine formulation for greater tumor accumulation and lower drug exposure to vulnerable tissues. Liposomes formulated with saturated/unsaturated phospholipids of different chain lengths, varying cholesterol content, and surface PEG were explored to understand the effects of such variations on drug release, encapsulation efficiency, stability and in vivo performance. Saturated phospholipids with longer chain lengths, higher cholesterol content and PEG resulted in greater stability. The optimal formulation obtained showed significantly lower clearance rate (3.6 ± 1.2 mL/h/Kg) and higher AUC0-inf (348 ± 31 µmol/L × h) in vivo when compared to free drug (414 ± 138 mL/h/Kg and 2.58 ± 0.74 µmol/L × h, respectively). In tumor-bearing mice, liposomal delivery decreased kidney drug levels by up to 5-fold at 6 and 24h post-administration. Tumor drug exposure was up to 12.7-fold greater with liposomal administration compared to free drug. Overall, the liposomal pentamidine formulation developed has significant potential for the treatment of solid tumors.

Novel lipid and preservative-free propofol formulation: properties and pharmacodynamics.

PURPOSE: Propofol is a water-insoluble intravenous anesthetic agent that is actually formulated as a water-in-oil emulsion with known drawbacks such as pain on injection, microorganism growth support and stability. We report on the properties of formulations of propofol in poly (N-vinyl-2-pyrrolidone)-block-poly(D,L-lactide), PVP-PLA, polymeric micelles (Propofol-PM). METHODS: Microbial growth in these formulations was evaluated with Pseudomonas aeruginosa (ATCC 9027), Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 25922) and Candida albicans (ATCC 10231). Sleep-recovery studies in female Sprague-Dawley rats, at a dose of 10mg/kg were performed to compare pharmacodynamic profiles of the new Propofol-PM formulations with those of Diprivan, a commercially available lipid based propofol formulation. RESULTS: Growth of microorganisms was not supported in the Propofol-PM formulations tested. No significant differences in times to unconsciousness, awakening, recovery of righting reflex and full recovery were observed between Propofol-PM formulations and Diprivan. CONCLUSIONS: Propofol loaded in PVP-PLA micelles (Propofol-PM) is not significantly different in terms of pharmacodynamic but demonstrates no microorganism growth support and improved stability that opens up the door to pain on injection reduction strategy.

One-step synthesis of amphiphilic diblock copolymers from bacterial poly([R]-3-hydroxybutyric acid).

Catalyzed transesterification in the melt is used to produce diblock copolymers of poly([R]-3-hydroxybutyric acid), PHB, and monomethoxy poly(ethylene glycol), mPEG, in a one-step process. Bacterial PHB of high molecular weight is depolymerized by consecutive and partly simultaneous reactions: pyrolysis and transesterification. The formation of diblocks is accomplished by the nucleophilic attack from the hydroxyl end-group of the mPEG catalyzed by bis(2-ethylhexanoate) tin. The resulting diblock copolymers are amphiphilic and self-assemble into sterically stabilized colloidal suspensions of PHB crystalline lamellae.