Microscopic Cracks Modulate Nucleation and Solid-State Crystallization Tendency of Amorphous Celecoxib.

Drugs have been classified as fast, moderate, and poor crystallizers based on their inherent solid-state crystallization tendency. Differential scanning calorimetry-based heat-cool-heat protocol serves as a valuable tool to define the solid-state crystallization tendency. This classification helps in the development of strategies for stabilizing amorphous drugs. However, microscopic characteristics of the samples were generally overlooked during these experiments. In the present study, we evaluated the influence of microscopic cracks on the crystallization tendency of a poorly water-soluble model drug, celecoxib. Cracks developed in the temperature range of 0-10 °C during the cooling cycle triggered the subsequent crystallization of the amorphous phase. Nanoindentation study suggested minimal differences in mechanical properties between samples, although the cracked sample showed relatively inhomogeneous mechanical properties. Nuclei nourishment experiments suggested crack-assisted nucleation, which was supported by Raman data that revealed subtle changes in intermolecular interactions between cracked and uncracked samples. Celecoxib has been generally classified as class II, i.e., a drug with moderate crystallization tendency. Interestingly, classification of amorphous celecoxib may change depending on the presence or absence of cracks in the amorphous sample. Hence, subtle events such as microscopic cracks should be given due consideration while defining the solid-state crystallization tendency of drugs.

Dual Nanomechanics in Anisotropic Porous Covalent Organic Framework Janus-Type Thin Films.

Empowered by crystalline ordered structures and homogeneous fabrication techniques, covalent organic frameworks (COFs) have been realized with uniform morphologies and isotropic properties. However, such homogeneity often hinders various surface-dependent properties observed in asymmetric nanostructures. The challenge remains to induce heterogeneity in COFs by creating an asymmetric superstructure such as a Janus thin film. In this regard, we propose a versatile yet straightforward interfacial layer-grafting strategy to fabricate free-standing Janus-type COF-graphene thin films. Herein, two-dimensional graphene sheets were utilized as the suitable grafter due to the possibility of noncovalent interactions between the layers. The versatility of the approach was demonstrated by fabricating two distinct Janus-type films, with the COF surface interwoven with nanofibers and nanospheres. The Janus-type films showcase opposing surface morphologies originating from graphene sheets and COF nanofibers or nanospheres, preserving the porosity (552-600 m2 g-1). The unique surface chemistries of the constituent layers further endow the films with orthogonal mechanical properties, as confirmed by the nanoindentation technique. Interestingly, the graphene sheets favor the Janus-type assembly of COF nanofibers over the nanospheres. This is reflected in the better nanomechanical properties of COFfiber-graphene films (Egraphene = 300-1200 MPa; ECOF = 15-60 MPa) compared to the COFsphere-graphene films (Egraphene = 11-14 MPa; ECOF = 2-5 MPa). These results indicate a direct relationship between the mechanical properties and homo/heterogeneity of Janus-type COF films.

Viscoelastic Covalent Organic Nanotube Fabric via Macroscopic Entanglement.

Covalent organic nanotubes (CONTs) are one-dimensional porous frameworks constructed from organic building blocks via dynamic covalent chemistry. CONTs are synthesized as insoluble powder that restricts their potential applications. The judicious selection of 2,2'-bipyridine-5,5'-dicarbaldehyde and tetraaminotriptycene as building blocks for TAT-BPy CONTs has led to constructing flexible yet robust and self-standing fabric up to 3 µm thickness. The TAT-BPy CONTs and TAT-BPy CONT fabric have been characterized by solid-state one-dimensional (1D) 13C CP-MAS, two-dimensional (2D) 13C-1H correlation NMR, 2D 1H-1H DQ-SQ NMR, and 2D 14N-1H correlation NMR spectroscopy. The mechanism of fabric formation has been established by using high-resolution transmission electron microscopy and scanning electron microscopy techniques. The as-synthesized viscoelastic TAT-BPy CONT fabric exhibits high mechanical strength with a reduced modulus (Er) of 8 (±3) GPa and hardness (H) of 0.6 (±0.3) GPa. Interestingly, the viscoelastic fabric shows time-dependent elastic depth recovery up to 50-70%.

Temperature-Reliant Dynamic Properties and Elasto-Plastic to Plastic Crystal (Rotator) Phase Transition in a Metal Oxyacid Salt.

Although, dynamic crystals are attractive for use in many technologies, molecular level mechanisms of various solid-state dynamic processes and their interdependence, remain poorly understood. Here, we report a rare example of a dynamic crystal (1), involving a heavy transition metal, rhenium, with an initial two-face elasticity (within ≈1 % strain), followed by elasto-plastic deformation, at room temperature. Further, these crystals transform to a rotator (plastic) crystal phase at ≈105 °C, displaying exceptional malleability. Qualitative and quantitative mechanical tests, X-ray diffraction, µ-Raman and polarized light microscopy experiments reveal that the elasto-plastic deformation involves both partial molecular rotations and slip, while malleability in the rotator phase is facilitated by reorientational motions and increased symmetry (slip planes). Our work, connecting the plastically bendable (1D or 2D) crystals with the rotator phases (3D), is important for designing multi-functional dynamic crystals.

Self-Assembly-Driven Nanomechanics in Porous Covalent Organic Framework Thin Films.

Nanomechanics signifies a key tool to interpret the macroscopic mechanical properties of a porous solid in the context of molecular-level structure. However, establishing such a correlation has proved to be significantly challenging in porous covalent organic frameworks (COFs). Structural defects or packing faults within the porous matrix, poor understanding of the crystalline assembly, and surface roughness are critical factors that contribute to this difficulty. In this regard, we have fabricated two distinct types of COF thin films by controlling the internal order and self-assembly of the same building blocks. Interestingly, the defect density and the nature of supramolecular interactions played a significant role in determining the corresponding thin films' stress-strain behavior. Thin films assembled from nanofibers (∼1-2 µm) underwent large deformation on the application of small external stress (Tp-Azofiber film: E ≈ 1.46 GPa; H ≈ 23 MPa) due to weak internal forces. On the other hand, thin films threaded with nanospheres (∼600 nm) exhibit a much stiffer and harder mechanical response (Tp-Azosphere film: E ≈ 15.3 GPa; H ≈ 66 MPa) due to strong covalent interactions and higher crystallinity. These porous COF films further exhibited a significant elastic recovery (∼80%), ideal for applications dealing with shock-resistant materials. This work provides in-depth insight into the fabrication of industrially relevant crystalline porous thin films and membranes by addressing the previously unanswered questions about the mechanical constraints in COFs.

Investigation of Poor Solubility of a Salt-Cocrystal Hydrate: A Case Study of the Common-Ion Effect in Betrixaban, an Anticoagulant Drug.

Achieving the desired solubility and dissolution of active pharmaceutical ingredients (APIs) continues to be a big challenge in the pharmaceutical industry. In this regard, multicomponent solids of APIs such as salts and cocrystals have shown significant promise in resolving such solubility/dissolution issues. However, very little is known on how the APIs' solubility or dissolution is affected by the drug to coformer ratio in multicomponent solids. Betrixaban, is an anticoagulant drug approved in 2017 for the prevention of venous thromboembolism. During the alternate solid form development studies of the known betrixaban maleate, a rare multicomponent solid form, salt-cocrystal hydrate of betrixaban, was discovered and characterized thoroughly by spectroscopic, thermal, and X-ray crystallographic methods. Significantly, the new betrixaban maleate maleic acid hydrate (1:1:2:1) form has shown lower melting point (80 °C) as compared to its parent salt (197.5 °C). From such a large melting difference (117 °C) between the salt and salt-cocrystal hydrate of API, we anticipated substantially better solubility for the salt-cocrystal hydrate (low enthalpy). Furthermore, the predicted solubility also supported our anticipation. However, the powder dissolution tests at different pH conditions provided contrary results, that is, the salt-cocrystal hydrate showed 10 times lower solubility as compared to its salt. A detailed investigation, considering all the potential factors, revealed that "common-ion effect" could be a critical factor for the low solubility of the salt-cocrystal hydrate in which the API to coformer ratio is 1:3. To the best of our knowledge, this is the first case study on the solubility of pharmaceutical salt-cocrystal hydrates with an emphasis on "common-ion effect" or drug to coformer ratio.

Harnessing molecular rotations in plastic crystals: a holistic view for crystal engineering of adaptive soft materials.

Plastic crystals (PCs), formed by certain types of molecules or ions with reorientational freedom, offer both exceptional mechanical plasticity and long range order, hence they are attractive for many mechano-adaptable technologies. While most classic PCs belong to simple globular molecular systems, a vast number of examples in the literature with diverse geometrical (cylindrical, bent, disk, etc.) and chemical (neutral, ionic, etc.) natures have proven their wide scope and opportunities. All the recent reviews on PCs aim to provide insights into a particular application, for instance, organic plastic crystal electrolytes or ferroelectrics. This tutorial review presents a holistic view of PCs by unifying the recent excellent progress in fundamental concepts from diverse areas as well as comparing them with liquid crystals, amphidynamic crystals, ordered crystals, etc. We cover the molecular and structural origins of the unique characteristics of PCs, such as exceptional plasticity, facile reversible switching of order-to-disorder states and associated colossal heat changes, and diffusion of ions/molecules, and their attractive applications in solid electrolytes, opto-electronics, ferroeletrics, piezoelectrics, pyroelectrics, barocalorics, magnetics, nonlinear optics, and so on. The recent progress not only demonstrates the diversity of scientific areas in which PCs are gaining attention but also the opportunities one can exploit using a crystal engineering approach, for example, the design of novel dynamic functional soft materials for future use in flexible devices or soft-robotic machines.

Metal-like Ductility in Organic Plastic Crystals: Role of Molecular Shape and Dihydrogen Bonding Interactions in Aminoboranes.

Ductility is a common phenomenon in many metals but is difficult to achieve in molecular crystals. Organic crystals bend plastically on one or two face-specific directions but fracture when stressed in any other arbitrary directions. An exceptional metal-like ductility and malleability in the isomorphous crystals of two globular molecules, BH3 NMe3 and BF3 NMe3 , is reported, with characteristic tensile stretching, compression, twisting, and thinning. The mechanically deformed samples, which transition to lower symmetry phases, retain good long-range order amenable to structure determination by single-crystal X-ray diffraction. Molecules in these high-symmetry crystals interact through electrostatic forces (B- -N+ ) to form columnar structures with multiple slip planes and weak dispersive forces between columns. On the other hand, the limited number of facile slip planes and strong dihydrogen bonding in BH3 NHMe2 negates ductility. Our study has implications for the design of soft ferroelectrics, solid electrolytes, barocalorics, and soft robotics.

Mechanophotonics: Flexible Single-Crystal Organic Waveguides and Circuits.

We present the one-dimensional optical-waveguiding crystal dithieno[3,2-a:2',3'-c]phenazine with a high aspect ratio, high mechanical flexibility, and selective self-absorbance of the blue part of its fluorescence (FL). While macrocrystals exhibit elasticity, microcrystals deposited at a glass surface behave more like plastic crystals due to significant surface adherence, making them suitable for constructing photonic circuits via micromechanical operation with an atomic-force-microscopy cantilever tip. The flexible crystalline waveguides display optical-path-dependent FL signals at the output termini in both straight and bent configurations, making them appropriate for wavelength-division multiplexing technologies. A reconfigurable 2×2-directional coupler fabricated via micromanipulation by combining two arc-shaped crystals splits the optical signal via evanescent coupling and delivers the signals at two output terminals with different splitting ratios. The presented mechanical micromanipulation technique could also be effectively extended to other flexible crystals.

Mechanical-Bending-Induced Fluorescence Enhancement in Plastically Flexible Crystals of a GFP Chromophore Analogue.

Single crystals of optoelectronic materials that respond to external stimuli, such as mechanical, light, or heat, are immensely attractive for next generation smart materials. Here we report single crystals of a green fluorescent protein (GFP) chromophore analogue with irreversible mechanical bending and associated unusual enhancement of the fluorescence, which is attributed to the strained molecular packing in the perturbed region. Soft crystalline materials with such fluorescence intensity modulations occurring in response to mechanical stimuli under ambient pressure conditions will have potential implications for the design of technologically relevant tunable fluorescent materials.

From Molecules to Interactions to Crystal Engineering: Mechanical Properties of Organic Solids.

Mechanical properties of organic molecular crystals have been noted and studied over the years but the complexity of the subject and its relationship with diverse fields such as mechanochemistry, phase transformations, polymorphism, and chemical, mechanical, and materials engineering have slowed understanding. Any such understanding also needs conceptual advances-sophisticated instrumentation, computational modeling, and chemical insight-lack of such synergy has surely hindered progress in this important field. This Account describes our efforts at focusing down into this interesting subject from the viewpoint of crystal engineering, which is the synthesis and design of functional molecular solids. Mechanical properties of soft molecular crystals imply molecular movement within the solid; the type of property depends on the likelihood of such movement in relation to the applied stress, including the ability of molecules to restore themselves to their original positions when the stress is removed. Therefore, one is interested in properties such as elasticity, plasticity, and brittleness, which are linked to structural anisotropy and the degree to which a structure veers toward isotropic character. However, these matters are still by no means settled and are system dependent. While elasticity and brittleness are probably displayed by all molecular solids, the window of plasticity is perhaps the one that is most amenable to crystal engineering strategies and methods. In all this, one needs to note that mechanical properties have a kinetic component: a crystal that is elastic under slow stress application may become plastic or brittle if the same stress is applied quickly. In this context, nanoindentation studies have shown themselves to be of invaluable importance in understanding structural anisotropy. Several problems in solid state chemistry, including classical ones, such as the melting point alternation in aliphatic straight chain dicarboxylic acids and hardness modulation in solid solutions, have been understood more clearly with this technique. The way may even be open to picoindentation studies and the observation of molecular level movements. As in all types of crystal engineering, an understanding of the intermolecular interactions can lead to property oriented crystal design, and we present examples where complex properties may be deliberately turned on or off in organic crystals: one essentially fine-tunes the degree of isotropy/anisotropy by modulating interactions such as hydrogen bonding, halogen bonding, π···π interactions, and C-H···π interactions. The field is now wide open as is attested by the activities of several research groups working in the area. It is set to take off into the domains of smart materials, soft crystals, and superelasticity and a full understanding of solid state reactivity.

Mechanically Flexible Organic Crystals Achieved by Introducing Weak Interactions in Structure: Supramolecular Shape Synthons.

Controlling mechanical properties of ordered organic materials remains a formidable challenge, despite their great potential for high performance mechanical actuators, transistors, solar cells, photonics, and bioelectronics. Here we demonstrate a crystal engineering approach to design mechanically reconfigurable, plastically flexible single crystals (of about 10) of three unrelated types of compounds by introducing active slip planes in structures via different noninterfering supramolecular weak interactions, namely van der Waals (vdW), π-stacking, and hydrogen bonding groups. Spherical hydrophobic groups, which assemble via shape complementarity (shape synthons), reliably form low energy slip planes, thus facilitating an impressive mechanical flexibility, which allowed molding the crystals into alphabetical characters to spell out "o r g a n i c c r y s t a l". The study, which reports the preparation of a series of exotic plastic crystals by design for the first time, demonstrates the potential of soft interactions for tuning the mechanical behavior of ordered molecular materials, including those from π-conjugated systems.

Molecular mechanics of elastic and bendable caffeine co-crystals.

Complementing recent experimental results, here we report a computational study of remarkably flexible, elastically bendable caffeine cocrystals (cocrystal solvate 1), formed from caffeine (CAF), 4-chloro-3-nitrobenzoic acid (CNB), and methanol, and compare with its unsolvated brittle form, 1 (dry). We show that 1 is able to maintain stable cocrystal structures at temperatures between 100 K and 400 K. The tensile and compressive Young's modulus of 1 are close to ~10 GPa. The ultimate strength is more than 600 MPa in tensile and 400 MPa in compressive at temperature of 100 K. The simulation results of the structural and mechanical properties of 1 are in good agreement with our previous experimental work. Notably, before the ultimate tensile stress, the stress-to-strain curves of 1 show linear behavior, but 1 (dry) show nonlinear behavior. This study might explain the remarkable elasticity of 1 and is relevant to the design of high-performance organic materials with excellent self-healing or efficient stress dissipating properties.

Crystal property engineering using molecular-supramolecular equivalence: mechanical property alteration in hydrogen bonded systems.

Most crystal engineering strategies exercised until now mainly rely on the alteration of weak non-covalent interactions to design structures and thus properties. Examples of mechanical property alteration for a given structure type are rare with only a few halogen bonded cases. The modular nature of halogen bonds with interaction strength tunability makes the task straightforward to obtain property differentiated crystals. However, the design of such crystals using hydrogen bond interactions has proven to be non-trivial, because of its relatively higher difference in bonding energies, and more importantly, disparate geometries of the functional groups. In the present crystal property engineering exercise, with the support of CSD analysis, we replaced a supramolecular precursor that leads to plastically bendable crystals, with a molecular equivalent, and obtained an equivalent crystal structure. As a result, the new structure, with comparable hydrogen bonding chains, produces elastically bendable single crystals (as opposed to plastically bendable crystals). In addition, the crystals show multidirectional (here two) elastic bending as well as rare elastic twisting. The occurrence of multiple isostructural examples, including a solid solution, with identical properties further demonstrates the general applicability of the proposed model. Crystals cannot display the concerned mechanical property in the absence of the desired structure type and fracture in a brittle manner on application of an external stress. Nanomechanical experiments and energy framework calculations also complement our results. To the best of our knowledge, this is the first example of a rational crystal engineering exercise using solely hydrogen bond interactions to obtain property differentiated crystals. This strategy namely molecular-supramolecular equivalence has been unexplored till now to tune mechanical properties, and hence is useful for crystal property engineering.

Kinematic and mechanical profile of the self-actuation of thermosalient crystal twins of 1,2,4,5-tetrabromobenzene: a molecular crystalline analogue of a bimetallic strip.

A paradigm shift from hard to flexible, organic-based optoelectronics requires fast and reversible mechanical response from actuating materials that are used for conversion of heat or light into mechanical motion. As the limits in the response times of polymer-based actuating materials are reached, which are inherent to the less-than-optimal coupling between the light/heat and mechanical energy in them, a conceptually new approach to mechanical actuation is required to leapfrog the performance of organic actuators. Herein, we explore single crystals of 1,2,4,5-tetrabromobenzene (TBB) as actuating elements and establish relations between their kinematic profile and mechanical properties. Centimeter-size acicular crystals of TBB are the only naturally twinned crystals out of about a dozen known materials that exhibit the thermosalient effect-an extremely rare and visually impressive crystal locomotion. When taken over a phase transition, crystals of this material store mechanical strain and are rapidly self-actuated to sudden jumps to release the internal strain, leaping up to several centimeters. To establish the structural basis for this colossal crystal motility, we investigated the mechanical profile of the crystals from macroscale, in response to externally induced deformation under microscope, to nanoscale, by using nanoindentation. Kinematic analysis based on high-speed recordings of over 200 twinned TBB crystals exposed to directional or nondirectional heating unraveled that the crystal locomotion is a kinematically complex phenomenon that includes at least six kinematic effects. The nanoscale tests confirm the highly elastic nature, with an elastic deformation recovery (60%) that is far superior to those of molecular crystals reported earlier. This property appears to be critical for accumulation of stress required for crystal jumping. Twinned crystals of TBB exposed to moderate directional heating behave as all-organic analogue of a bimetallic strip, where the lattice misfit between the two crystal components drives reversible deformation of the crystal.

Thermally activated delayed fluorescence in a mechanically soft charge-transfer complex: role of the locally excited state.

Molecular design for thermally activated delayed fluorescence (TADF) necessitates precise molecular geometric requirements along with definite electronic states to ensure high intersystem crossing (ISC) rate and photoluminescence quantum yield (PLQY). Achieving all these requirements synchronously while maintaining ease of synthesis and scalability is still challenging. To circumvent this, our strategy of combining a crystal engineering approach with basic molecular quantum mechanical principles appears promising. A holistic, non-covalent approach for achieving efficient TADF in crystalline materials with distinct mechanical properties is highlighted here. Charge transfer (CT) co-crystals of two carbazole-derived donors (ETC and DTBC) with an acceptor (TFDCNB) molecule are elaborated as a proof-of-concept. Using temperature-dependent steady-state and time-resolved photoluminescence techniques, we prove the need for a donor-centric triplet state (3LE) to ensure efficient TADF. Such intermediate states guarantee a naturally forbidden, energetically uphill reverse intersystem crossing (RISC) process, which is paramount for effective TADF. A unique single-crystal packing feature with isolated D-A-D trimeric units ensured minimal non-radiative exciton loss, leading to a high PLQY and displaying interesting mechanical plastic bending behaviour. Thus, a comprehensive approach involving a non-covalent strategy to circumvent the conflicting requirements of a small effective singlet-triplet energy offset and a high oscillator strength for efficient TADF emitters is achieved here.

Elastic organic semiconducting single crystals for durable all-flexible field-effect transistors: insights into the bending mechanism.

Although many examples of mechanically flexible crystals are currently known, their utility in all-flexible devices is not yet adequately demonstrated, despite their immense potential for fabricating high performance flexible devices. Here, we report two alkylated diketopyrrolopyrrole (DPP) semiconducting single crystals, one of which displays impressive elastic mechanical flexibility whilst the other is brittle. Using the single crystal structures and density functional theory (DFT) calculations, we show that the methylated diketopyrrolopyrrole (DPP-diMe) crystals, with dominant π-stacking interactions and large contributions from dispersive interactions, are superior in terms of their stress tolerance and field-effect mobility (µ FET) when compared to the brittle crystals of the ethylated diketopyrrolopyrrole derivative (DPP-diEt). Periodic dispersion-corrected DFT calculations revealed that upon the application of 3% uniaxial strain along the crystal growth (a)-axis, the elastically flexible DPP-diMe crystal displays a soft energy barrier of only 0.23 kJ mol-1 while the brittle DPP-diEt crystal displays a significantly larger energy barrier of 3.42 kJ mol-1, in both cases relative to the energy of the strain-free crystal. Such energy-structure-function correlations are currently lacking in the growing literature on mechanically compliant molecular crystals and have the potential to support a deeper understanding of the mechanism of mechanical bending. The field effect transistors (FETs) made of flexible substrates using elastic microcrystals of DPP-diMe retained µ FET (from 0.019 cm2 V-1 s-1 to 0.014 cm2 V-1 s-1) more efficiently even after 40 bending cycles when compared to the brittle microcrystals of DPP-diEt which showed a significant drop in µ FET just after 10 bending cycles. Our results not only provide valuable insights into the bending mechanism, but also demonstrate the untapped potential of mechanically flexible semiconducting crystals for designing all flexible durable field-effect transistor devices.

Non-stoichiometric carbamazepine cocrystal hydrates of 3,4-/3,5-dihydroxybenzoic acids: coformer-water exchange.

The cocrystallisation of carbamazepine (CBZ) with 3,4-/3,5-dihydroxybenzoic acids (34/35DHBA) with different stoichiometries formed molecular alloys, exchanging a water molecule, in their isostructural CBZ dihydrate form. Furthermore, we show a correlation between the mechanical properties of the CBZ-DHBA cocrystals with the amount of coformer present.

Autonomous self-healing organic crystals for nonlinear optics.

Non-centrosymmetric molecular crystals have a plethora of applications, such as piezoelectric transducers, energy storage and nonlinear optical materials owing to their unique structural order which is absent in other synthetic materials. As most crystals are brittle, their efficiency declines upon prolonged usage due to fatigue or catastrophic failure, limiting their utilities. Some natural substances, like bone, enamel, leaf and skin, function efficiently, last a life-time, thanks to their inherent self-healing nature. Therefore, incorporating self-healing ability in crystalline materials will greatly broaden their scope. Here, we report single crystals of a dibenzoate derivative, capable of self-healing within milliseconds via autonomous actuation. Systematic quantitative experiments reveal the limit of mechanical forces that the self-healing crystals can withstand. As a proof-of-concept, we also demonstrate that our self-healed crystals can retain their second harmonic generation (SHG) with high efficiency. Kinematic analysis of the actuation in our system also revealed its impressive performance parameters, and shows actuation response times in the millisecond range.

Catalysis by molecular iodine: a rapid synthesis of 1,8-dioxo-octahydroxanthenes and their evaluation as potential anticancer agents.

Molecular iodine facilitated the reaction of 5,5-dimethyl-1,3-cyclohexanedione with aromatic aldehydes in iso-propanol affording a variety of 1,8-dioxo-octahydroxanthenes in high yields. Most of the compounds synthesized showed good anti-proliferative properties in vitro against three cancer cell lines and 9-(2-hydroxyphenyl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione possessing a 2-hydroxy phenyl group at C-9 position was found to be promising. Further structure elaboration of the same compound and the crystal structure analysis and hydrogen bonding patterns of another compound that is, 9-(4-methoxyphenyl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione prepared by using this methodology is presented.