Preparation and characterization of a novel bioactive restorative composite based on covalently coupled polyurethane-nanohydroxyapatite fibres.

Nanohydroxyapatite (n-HAp) was prepared using a sol-gel method. n-HAp powder was obtained from the gel form by heat treatment followed by grinding using ball milling. A novel polyurethane composite material was prepared by chemically binding the hydroxyapatite to the diisocyanate component in the polyurethane backbone through solvent polymerization. The procedure involved the stepwise addition of monomeric units of the polyurethane and optimizing the reagent concentrations. The resultant composite material was electrospun to form fibre mats. The fibres were less than 1mum in thickness and contained no beads or irregularities. Chemical structural characterization of both the ceramics and the novel polymers were carried out by Fourier transform infrared and Raman spectroscopy. X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy and Brunauer-Emmett-Teller surface area analysis were also employed to observe the crystal lattice and size and surface area of the n-HAp. Further characterization (by energy-dispersive X-ray analysis and SEM) of the spun fibres revealed the presence of elements associated with hydroxyapatite and polyurethane without the presence of any loose particles of hydroxyapatite, indicating the formation of the covalent bond between the ceramics and the polymer backbone.

Controlled release of chlorhexidine diacetate from a porous methacrylate system: supercritical fluid assisted foaming and impregnation.

The release of chlorhexidine diacetate (CX) from a self-curing polymeric system based on poly(ethylmethacrylate) and tetrahydrofurfurylmethacrylate (PEM/THFM) was developed in this study. Supercritical fluid assisted impregnation and foaming was employed for preparing porous CX-PEM/THFM drug release system. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) show that the crystallinity of CX significantly decreased after supercritical processing, whilst Raman spectroscopy suggested a hydrogen bonding interaction between the CX and PEM in the product. A UV-Vis dissolution study revealed that the drug release rate is almost as seven times faster in the SCF processed drug delivery system than conventional cured samples.

Synthesis of poly(sebacic anhydride)-indomethacin controlled release composites via supercritical carbon dioxide assisted impregnation.

Poly(sebacic anhydride), PSA and indomethacin drug composite (DC) formulations were prepared using supercritical CO(2) (sc-CO(2)) aided mixing. The effect of the experimental temperature and sebacic acid purity on the physical properties of PSA-indomethacin DCs was investigated using a range of analytical techniques. The nature of the PSA-indomethacin interaction in composites after processing in sc-CO(2) under various conditions was investigated using differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, and powder X-ray diffraction (XRD) methods, respectively. The results indicate that processing at 130 degrees C of a 4:1 (w/w) ratio PSA-indomethacin mixture, renders the indomethacin amorphous and dispersed within the polymer matrix. The primary interaction between PSA and indomethacin appears to be hydrogen bonding between the carboxylic acid OH of indomethacin and the carbonyl group of PSA. In vitro dissolution studies revealed that the processed composites exhibit a substantially enhanced dissolution rate compared to the physical mixtures. Also, through the control of experimental conditions, the initial burst effect of the drug release was largely alleviated. Instead, the erosion of PSA (zero order degradation) became the dominant factor in controlling the drug release rate.

Fabrication and in vivo evaluation of hydroxyapatite/carbon nanotube electrospun fibers for biomedical/dental application.

The aim was to synthesize bioactive electrospun fibers for biomedical and dental application with improved biocompatibility. In situ precipitation of nano-hydroxyapatite (nHA) was performed with various concentrations (0.5%, 1%, 2%, 3%, and 5% wt/wt) of functionalized multi-walled-carbon nanotubes (MWCNTs) by using microwave irradiation technique. The obtained composites were characterized by Fourier Transform Infrared (FTIR), X-ray Diffraction (XRD), Thermogravimetric Analysis/Differential Scanning Calorimetry (TGA/DSC), and the cylindrical discs were made for mechanical testing. The failure behavior was analyzed by Scanning Electron Microscope (SEM). CNT and HA/CNT were silanized with γ-methacryloxypropyl-trimethoxysilane (MPTS) and mixed with polyvinyl alcohol (10% wt./vol.) and electrospun to fabricate fibers. The biocompatibility of both fibers was accessed by their effects on angiogenesis in a chick chorioallantoic membrane (CAM) assay. The electrospun fibers were analyzed by SEM. FTIR confirmed the structural behavior of pre and post-silanized HA/CNT. XRD showed the phase purity and crystallinity before and after heat treatment. Mechanical properties showed that 3% loaded HA/CNT has higher compressive strength (100.5±5.9MPa) compared to others and the failure behavior exhibited dispersion of CNT in HA matrix. The HA/CNT electrospun fibers showed significantly more blood vessels formation compared to CNT fibers. These HA/CNT electrospun fibers showed promising results in terms of biocompatibility and with improved mechanical properties of CNT reinforced composites, they can be used in load bearing clinical applications.

Supercritical fluid assisted impregnation of indomethacin into chitosan thermosets for controlled release applications.

Supercritical carbon dioxide (sc-CO(2)) was used to impregnate indomethacin (a non-steroidal anti-inflammatory drug) into chitosan thermosets for the preparation of controlled release formulations. The products were analyzed by a range of methods including powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effects of the experimental temperature and pressure of the sc-CO(2) on the thermal behavior of chitosan-indomethacin drug composites (DCs) was investigated via differential scanning calorimeter (DSC). The interaction of chitosan and indomethacin after impregnation was then studied by Fourier transform infrared (FTIR) and Raman spectroscopy, respectively. Our results suggest that the supercritical fluid impregnation process results in indomethacin being amorphously dispersed within the chitosan matrix. FTIR data suggest that the aliphatic carbonyl group of indomethacin interacts with the NH(2) group of the chitosan backbone. In vitro dissolution studies (via UV-vis spectroscopy) reveal that the dissolution rate of indomethacin substantially increases after processing in sc-CO(2), particularly, under the experimental conditions 20.7 MPa and 70 degrees C.

Formation and characterization of porous indomethacin-PVP coprecipitates prepared using solvent-free supercritical fluid processing.

Supercritical carbon dioxide (sc-CO2) was used to prepare coprecipitates of indomethacin (IM) and poly(vinylpyrrolidone) (PVP) with the aim to improve the dissolution rate of IM. The coprecipitates of IM and PVP at various proportions were prepared using a stirred batch reactor containing sc-CO2 as a gas saturated solution (i.e., the compressible CO2 is dissolved in the molten compound). Temperatures between 40 and 90 degrees C and pressure of 150 or 200 bar were employed. The coprecipitates prepared at 75 degrees C and 150 bar were characterized using differential scanning calorimetry (DSC), powder X-ray diffraction (PXD), scanning electron microscopy (SEM), and dissolution testing. The results suggested that IM was totally amorphous at PVP weight fraction of 0.80 and above (indeed, as a molecular composite in which the drug molecules interact with the polymer backbone). As the PVP weight fraction decreased, IM displayed an increasing amount of crystalline material. The SEM photographs of coprecipitates showed a foamed and porous structure. The dissolution rate of IM was increased by incorporation of PVP. IM and PVP at various weight fractions exhibited comparatively higher dissolution rates than that of crystalline IM alone. The sc-CO2 based process produced a solvent free, completely amorphous porous IM solid dispersion with a rapid dissolution rate.

Metal organic chemical vapour deposition (MOCVD) of bone mineral like carbonated hydroxyapatite coatings.

For the first time, the MOCVD technique has been used to deposit carbonated hydroxyapatite onto Ti6AL4V substrates using volatile monomeric (liquid) complexes [Ca(beta-diketonate)(2)(L)] and P(OEt)(3).

Biodegradable polyurethanes: biodegradable low adherence films for the prevention of adhesions after surgery.

Adhesions commonly occur after internal disease or surgery. The natural healing response leads to the formation of vascular and avascular adhesions after inflammatory diseases and surgical interventions. A barrier film could be incorporated during surgery between layers of tissues that must not adhere to one another. The film would be biodegradable so that it disappears over a period of time, and would ideally be two sided, allowing relative movement at that interface, while being firmly anchored on the opposite side to prevent displacement. Polyesterurethane-polydimethylsiloxane graft polymers are synthesised. Chemical characterisation of the polymer is performed by using Fourier transform infrared spectroscopy and gel permeation chromatography. In vitro hydrolytic degradation is carried out in which films are immersed at 37 degrees C in alkaline solution. Degradation is assessed by tensile testing as a function of time to determine the degradation of mechanical strength, infrared spectroscopy, and mass loss. A titration method is also used to determine quantitatively the hydrolytic degradation. In order to study the adhesions of films, an in-vitro model based on a gelatine test, which is simple and rapid, is described. Suitable candidate films investigated from the in-vitro work are subjected to in vivo tests for both biodegradation and their ability to prevent adhesion.

Electrospun polyurethane/hydroxyapatite bioactive scaffolds for bone tissue engineering: the role of solvent and hydroxyapatite particles.

Polyurethane (PU) is a promising polymer to support bone-matrix producing cells due to its durability and mechanical resistance. In this study two types of medical grade poly-ether urethanes Z3A1 and Z9A1 and PU-Hydroxyapatite (PU-HA) composites were investigated for their ability to act as a scaffold for tissue engineered bone. PU dissolved in varying concentrations of dimethylformamide (DMF) and tetrahydrofuran (THF) solvents were electrospun to attain scaffolds with randomly orientated non-woven fibres. Bioactive polymeric composite scaffolds were created using 15 wt% Z3A1 in a 70/30 DMF/THF PU solution and incorporating micro- or nano-sized HA particles in a ratio of 3:1 respectively, whilst a 25 wt% Z9A1 PU solution was doped in ratio of 5:1. Chemical properties of the resulting composites were evaluated by FTIR and physical properties by SEM. Tensile mechanical testing was carried out on all electrospun scaffolds. MLO-A5 osteoblastic mouse cells and human embryonic mesenchymal progenitor cells, hES-MPs were seeded on the scaffolds to test their biocompatibility and ability to support mineralised matrix production over a 28 day culture period. Cell viability was assayed by MTT and calcium and collagen deposition by Sirius red and alizarin red respectively. SEM images of both electrospun PU scaffolds and PU-HA composite scaffolds showed differences in fibre morphology with changes in solvent combinations and size of HA particles. Inclusion of THF eliminated the presence of beads in fibres that were present in scaffolds fabricated with 100% DMF solvent, and resulted in fibres with a more uniform morphology and thicker diameters. Mechanical testing demonstrated that the Young׳s Modulus and yield strength was lower at higher THF concentrations. Inclusion of both sizes of HA particles in PU-HA solutions reinforced the scaffolds leading to higher mechanical properties, whilst FTIR characterisation confirmed the presence of HA in all composite scaffolds. Although all scaffolds supported proliferation of both cell types and deposition of calcified matrix, PU-HA composite fibres containing nano-HA enabled the highest cell viability and collagen deposition. These scaffolds have the potential to support bone matrix formation for bone tissue engineering.

Continuous hydrothermal synthesis of extensive 2D sodium titanate (Na2Ti3O7) nano-sheets.

A novel and rapid and continuous hydrothermal route to the synthesis of extensive ultra-thin 2D sodium titanate (Na(2)Ti(3)O(7)) nano-sheets using a superheated water flow at 450 degrees C and 24.1 MPa as a crystallizing medium is described. High resolution electron microscopy of the sheets revealed that they were a few layers thick and largely uncurled, highly crystalline despite their very short time under hydrothermal flow conditions. The sodium titanate sheets possessed excellent photocatalytic activity for decolourisation of methylene blue dye.

Titania nanospheres from supercritical fluids.

Surfactant-coated amorphous titania nanospheres have been synthesised using templating 'water-in-supercritical carbon dioxide' emulsion droplets; the process represents a clean and controlled method for the manufacture of high-purity nanoparticles.