RESUMEN
Folic acid is often used for active targeting of tumor cells to enhance therapeutic outcomes. Here, folic acid was conjugated with chitosan and folate-conjugated chitosan-lipid hybrid nanoparticles were prepared by ionic gelation method using anionic lipid. These nanoparticles were in size range of 200 to 400 nm with spherical shape. In vitro drug release data suggested a sustained release of cisplatin. The therapeutic efficacy of the folate-conjugated hybrid nanoparticles was evaluated in SK-OV-3, A2780 and MCF-7 cancer cell lines. A significant increase in cytotoxicity was observed with folate targeted LPHNPs compared to non-targeted LPHNPs. Significantly enhanced cellular uptake and cell cycle arrest resulting from folate-targeted nanoparticles were confirmed using fluorescence microscopy and flow cytometry. The therapeutic efficacy and tumor penetration were further evaluated in 3D spheroid tumor models. These studies suggest that folate-conjugated lipid-chitosan nanoparticles could enhance therapeutic activity and may represent a promising platform for active targeting of tumor cells.
Asunto(s)
Quitosano/química , Cisplatino/química , Ácido Fólico/química , Nanopartículas/química , Polímeros/química , Línea Celular Tumoral , Sistemas de Liberación de Medicamentos/métodos , Citometría de Flujo , Humanos , Células MCF-7 , Microscopía Fluorescente , Esferoides Celulares/efectos de los fármacosRESUMEN
Proniosomes (PN) are the dry water-soluble carrier systems that may enhance the oral bioavailability, stability, and topical permeability of therapeutic agents. The low solubility and low oral bioavailability due to extensive first pass metabolism make Pentazocine as an ideal candidate for oral and topical sustained release delivery. The present study was aimed to formulate the PNs by quick slurry method that are converted to niosomes (liquid dispersion) by hydration, and subsequently formulated to semisolid niosomal gel. The PNs were found in spherical shape in the SEM and stable in the physicochemical and thermal analysis (FTIR, TGA, and XRD). The quick slurry method produced high recovery (> 80% yield) and better flow properties (θ = 28.1-37.4°). After hydration, the niosomes exhibited desirable entrapment efficiency (44.45-76.23%), size (4.98-21.3 µm), and zeta potential (- 9.81 to - 21.53 mV). The in vitro drug release (T100%) was extended to more than three half-lives (2-4 h) and showed good fit to Fickian diffusion indicated by Korsmeyer-Peppas model (n = 0.136-0.365 and R2 = 0.9747-0.9954). The permeation of niosomal gel was significantly enhanced across rabbit skin compared to the pure drug-derived gel. Therefore, the PNs are found promising candidates for oral as dissolution enhancement and sustained release for oral and topical delivery of pentazocine for the management of cancer pain.
Asunto(s)
Pentazocina/metabolismo , Profármacos/metabolismo , Absorción Cutánea/efectos de los fármacos , Piel/metabolismo , Administración Cutánea , Analgésicos Opioides/administración & dosificación , Analgésicos Opioides/metabolismo , Animales , Disponibilidad Biológica , Liberación de Fármacos/fisiología , Geles , Liposomas , Pentazocina/administración & dosificación , Pentazocina/química , Permeabilidad/efectos de los fármacos , Profármacos/administración & dosificación , Profármacos/química , Conejos , Piel/efectos de los fármacos , Absorción Cutánea/fisiología , Solubilidad , Difracción de Rayos XRESUMEN
The current study aimed to develop novel pH independent microparticles loaded with ropinirole (ROP) for sustained drug release. Eudragit RS 100 was used as release retardant and microparticles were fabricated by oil-in-oil emulsion solvent evaporation method. A three-factor three-level Box-Behnken design using Design-Expert software was employed to optimize formulation variables. Ropinirole loaded microparticles were evaluated with respect to morphology, particle size, encapsulation efficiency, and in vitro release profile. Optical microscopy and SEM micrographs indicated spherical shape with smooth surface and well-defined boundary. The particle size was in the range of 98.86 to 236.29 µm, being significantly increased with increasing polymer concentration. Higher polymer load also increased the thickness of internal polymer network, which led to reduced drug loss and higher entrapment efficiency (89%). The cumulative in vitro release was found to be in the range of 54.96 to 99.36% during the release studies (12 h) following zero order release kinetics and non-Fickian diffusion pattern. The developed microparticles have the potential to sustain the release of ropinirole, which may lead to a reduction in its adverse effects and improved management of Parkinson's disease.
Asunto(s)
Resinas Acrílicas/síntesis química , Indoles/síntesis química , Microesferas , Tamaño de la Partícula , Resinas Acrílicas/análisis , Preparaciones de Acción Retardada/análisis , Preparaciones de Acción Retardada/síntesis química , Evaluación Preclínica de Medicamentos/métodos , Indoles/análisis , Difracción de Rayos X/métodosRESUMEN
Tuberculosis (TB) is an infectious disease that is communicable from one person to another. Pakistan stands forefront among few unfortunate countries that still have heavy burden of TB infection. Being a developing country, TB patients in Pakistan have to face different socio-economic constraints that upset life of the patients as well as their families. A cross sectional survey was conducted in three selected districts, Lodharan, Bahawalpur and Bahawalnagar during February 2011 to June 2011. From three hundred selected patients 210 Were enrolled in study after receiving written consents. Data were collected though structured questionnaire and verbal-interviews and statistically analyzes by using the univariate analysis. The survey results showed that the low educational status (p < 0.0012, CI 95%), unawareness of disease (88.7%), crowded population (p = 0.0000, CI, 95%), poverty, high treatment cost and distant access to public health facilities were directly related to prevalence of TB. Different disease related constraints including poor attitude of family members, colleagues, society and even health care professionals (p = 0.0000, CI 95%) were also found to be major social factors leading to non-compliance and denial of TB treatment. Socio-economic constraints such as low literacy rate, unemployment, unawareness of disease, high treatment cost, poor attitude of family, society and healthcare professionals were directly related to noncompliance and should be given high priority consideration for achieving better TB management and mitigation.
Asunto(s)
Antituberculosos/uso terapéutico , Accesibilidad a los Servicios de Salud , Cumplimiento de la Medicación , Factores Socioeconómicos , Tuberculosis/tratamiento farmacológico , Antituberculosos/efectos adversos , Antituberculosos/economía , Estudios Transversales , Costos de los Medicamentos , Escolaridad , Relaciones Familiares , Femenino , Encuestas de Atención de la Salud , Conocimientos, Actitudes y Práctica en Salud , Accesibilidad a los Servicios de Salud/economía , Humanos , Entrevistas como Asunto , Masculino , Pakistán/epidemiología , Relaciones Médico-Paciente , Prejuicio , Opinión Pública , Factores de Riesgo , Vergüenza , Estigma Social , Factores de Tiempo , Tuberculosis/economía , Tuberculosis/epidemiología , Tuberculosis/psicologíaRESUMEN
Nanotechnology has opened a new horizon of research in various fields including applied physics, chemistry, electronics, optics, robotics, biotechnology and medicine. In the biomedical field, nanomaterials have shown remarkable potential as theranostic agents. Materials which are considered inert are often used in nanomedicine owning to their nontoxic profile. At nanoscale, these inert materials have shown unique properties that differ from bulk and dissolved counterparts. In the case of metals, this unique behavior not only imparts paramount advantages but also confers toxicity due to their unwanted interaction with different cellular processes. In the literature, the toxicity of nanoparticles made from inert materials has been investigated and many of these have revealed toxic potential under specific conditions. The surge to understand underlying mechanism of toxicity has increased and different means have been employed to overcome toxicity problems associated with these agents. In this review, we have focused nanoparticles of three inert metallic materials i.e. gold, silver and iron as these are regarded as biologically inert in the bulk and dissolved form. These materials have gained wider research interest and studies indicating the toxicity of these materials are also emerging. Oxidative stress, physical binding and interference with intracellular signaling are the major role player in nanotoxicity and their predominance is highly dependent upon size, surface coating and administered dose of nanoparticles. Current strategies to overcome toxicity have also been reviewed in the light of recent literature. The authors also suggested that uniform testing standards and well-designed studies are needed to evaluate nanotoxicity of these materials that are otherwise considered as inert. This article is open to POST-PUBLICATION REVIEW. Registered readers (see "For Readers") may comment by clicking on ABSTRACT on the issue's contents page.
Asunto(s)
Oro/toxicidad , Hierro/toxicidad , Nanopartículas/toxicidad , Plata/toxicidad , Relación Dosis-Respuesta a Droga , Oro/química , Humanos , Hierro/química , Nanopartículas/química , Nanotecnología , Tamaño de la Partícula , Plata/química , Propiedades de SuperficieRESUMEN
Tuberculosis (TB) is an infectious disease that is communicable from one person to another. Pakistan stands forefront among few unfortunate countries that still have heavy burden of TB infection. Being a developing country, TB patients in Pakistan have to face different socio-economic constraints that upset life of the patients as well as their families. A cross sectional survey was conducted in three selected districts, Lodharan, Bahawalpur and Bahawalnagar during February 2011 to June 2011. From three hundred selected patients 210 were enrolled in study after receiving written consents. Data were collected though structured questionnaire and verbal interviews and statistically analyzed by using the univariate analysis. The survey results showed that the low educational status (p < 0.0012, CI 95%), unawareness of disease (88.7%), crowded population (p =0.0000, CI, 95%), poverty, high treatment cost and distant access to public health facilities were directly related to prevalence of TB. Different disease related constraints including poor attitude of family members, colleagues, society and even health care professionals (p = 0.0000, CI 95%) were also found to be major social factors leading to non-compliance and denial of TB treatment. Socio-economic constraints such as low literacy rate, unemployment, unawareness of disease, high treatment cost, poor attitude of family, society and health care professionals were directly related to noncompliance and should be given high priority consideration for achieving better TB management and mitigation.
Asunto(s)
Costos de la Atención en Salud , Accesibilidad a los Servicios de Salud/economía , Cooperación del Paciente , Tuberculosis/terapia , Adulto , Estudios Transversales , Países en Desarrollo , Femenino , Humanos , Masculino , Persona de Mediana Edad , Pakistán , Pobreza , Prevalencia , Factores Socioeconómicos , Encuestas y Cuestionarios , Tuberculosis/economía , Adulto JovenRESUMEN
A simple and cost effective RPLC-UV bio-analytical method was developed and used for tenoxicam quantification on ODS Hypersil C-18 column using classical liquid-liquid extraction technique for sample preparation. Acetonitrile was used as precipitating agent for plasma proteins and supernatant was taken for injection without any further modification. The bio-analytical method depends upon isocratic elution using binary mixture of aqueous 0.1 M potassium dihydrogen phosphate and acetonitrile in 6 : 4 ratio. The pH of mobile phase was adjusted to 2.8 which favor tenoxicam to remain undissociated throughout the analysis. The optimized flow rate of 1.0 mL/min provided proper separation of peaks and column clean up within 5 min. The UV detection was achieved at 381 nm and 4.29 min. Reproducible calibration curve gave 0.325 µg/mL LOQ, linear dynamic range from 0.325 to 20 µg/mL and recovery from plasma was 98.5% with %CV 0.2314 achieved. After validation, the method was applied in pharmacokinetic study in healthy human volunteers (n = 8). The pharmacokinetic parameters were evaluated using kinetica version 4.1.1. The values of C. and area under curve for current study were 1.776 ± 0.003 pg/mL and 179.97 ± 0.0681 (mean ± SEM) pg x h/mL. The values of t, and volume of distribution for tenoxicam in current study were 74.103 0.167 h (mean ± SEM) and 11.962 ± 0.0677 L/kg (mean ± SEM), respectively. This method was simple, sensitive and successfully applied in pharmacokinetic studies. It can be extended to bioequivalence studies and evaluation of tenoxicam in different clinical situations.
Asunto(s)
Cromatografía Líquida de Alta Presión/métodos , Cromatografía de Fase Inversa/métodos , Piroxicam/análogos & derivados , Análisis Costo-Beneficio , Estabilidad de Medicamentos , Humanos , Piroxicam/sangre , Piroxicam/químicaRESUMEN
Liposomes are lipid based vesicular systems that offer novel platform for versatile drug delivery to target cell. Liposomes were first reported by Bangham and his co-workers in 1964 (1). Since then, liposomes have undergone extensive research with the prime aim to optimize encapsulation, stability, circulation time and target specific drug delivery. Manipulation of a liposome's lipid bilayer and surface decoration with selective ligands has transformed conventional liposomes into adaptable and multifunctional liposomes. Development of liposomes with target specificity provide the prospect of safe and effective therapy for challenging clinical applications. Bioresponsive liposomes offer the opportunity to release payload in response to tissue specific microenvironment. Incorporation of novel natural and synthetic materials has extended their application from stable formulations to controlled release targeted drug delivery systems. Integration and optimization of multiple features into one system revolutionized research in the field of cancer, gene therapy, immunotherapy and infectious diseases. After 50 years since the first publication, this review is aimed to highlight next generation of liposomes, their preparation methods and progress in clinical applications.
Asunto(s)
Sistemas de Liberación de Medicamentos , Liposomas/metabolismo , Animales , Humanos , Liposomas/químicaRESUMEN
Excessive UV radiation exposure is harmful to skin cells since sunburn is accompanied by oxidative burst, leading to a rapid increase in skin cancer. However, the insufficient UV photoprotection of approved sunscreens and the negative impact of their compositions on ecosystems and human health makes the utility of sunscreen a questionable recommendation. Therefore, discovering UV filters with significant antioxidant activity and improved topical performance and photostability is an urgent need. Recently, the use of nanosized natural molecules incorporated in sunscreens has been a scientific hot topic, as it has been suggested that they provide a synergistic effect with synthetic UV filters, improving overall SPF and antioxidant activity, higher retention on the epidermis, and less toxicity. The aim of this review was to verify the usefulness of sunscreens incorporating flavonoid-loaded nanoparticles. A literature review was performed, where original and review articles published in the last 6 years were analyzed. Formulations containing nanosized flavonoids with improved UVA photoprotection and safer toxicological profiles, associated or not with synthetic filters, are promising sunscreens and more clinical investigation must be performed to validate these findings.
Asunto(s)
Protectores Solares , Rayos Ultravioleta , Humanos , Protectores Solares/farmacología , Protectores Solares/efectos de la radiación , Rayos Ultravioleta/efectos adversos , Flavonoides/farmacología , Antioxidantes/farmacología , Ecosistema , Piel/efectos de la radiaciónRESUMEN
The low aqueous solubility of many drugs reduces their bioavailability in the blood. Oils have been used for centuries to enhance the solubility of drugs; however, they can disturb the lipid profile of the patients. In this study, self-nanoemulsifying drug delivery systems of omega-3 fatty acids-rich oils are prepared and optimized for the delivery of lipophilic drugs. Rosuvastatin, a potent hypolipidemic drug, was used as a model lipophilic drug. Fish oil showed more than 7-fold higher solubility of rosuvastatin than other oils and therefore it was selected for the development of self-nanoemulsifying drug delivery systems (SNEDDS). Different combinations of surfactants and co-surfactants were screened and a surfactant mixture of Tween 80 (surfactant) and Capryol PGMC (cosurfactant) were selected for compatibility with fish oil and rosuvastatin. A pseudoternary phase diagram of oil, surfactant, and co-surfactant was designed to identify the emulsion region. The pseudoternary phase diagram predicted a 1:3 oil and surfactant mixture as the most stable ratio for the emulsion system. Then, a response-surface methodology (Box-Behnken design) was applied to calculate the optimal composition. After 17 runs, fish oil, Tween 80, and Capryol PGMC in proportions of 0.399, 0.67, and 0.17, respectively, were selected as the optimized formulation. The self-nanoemulsifying drug delivery systems showed excellent emulsification potential, robustness, stability, and drug release characteristics. In the drug release studies, SNEDDS released 100% of the payload in around 6 h whereas, release of the plain drug was less than 70% even after 12 h. Therefore, omega-3 fatty acids-rich healthy lipids have enormous potential to enhance the solubility of lipophilic drugs whereas, self-emulsification can be used as a simple and feasible approach to exploit this potential.
Asunto(s)
Ácidos Grasos Omega-3 , Nanopartículas , Administración Oral , Disponibilidad Biológica , Sistemas de Liberación de Medicamentos/métodos , Emulsiones , Aceites de Pescado , Tamaño de la Partícula , Polisorbatos , Rosuvastatina Cálcica , Solubilidad , TensoactivosRESUMEN
AIMS: The aim of the study is to develop advanced antibacterial agents as nanoparticles instead of antibiotics due to the emergence of antimicrobial resistance. BACKGROUND: Pseudomonas aeruginosa is capable of causing many diseases, including serious bacterial pneumonia. There is a need for an efficient antibacterial agent to kill these pathogens. OBJECTIVE: The objective of the study is the synthesis of advanced antibacterial agents as nanoparticles for biomedical applications that can play a vital role to kill Gram-negative bacteria (Pseudomonas aeruginosa). METHODS: A novel fabrication growth of hydrophilic spiky gold nanoparticles (SGNPs) via reduction method is reported. RESULTS: Surface plasmon resonance peak of the synthesized SGNPs was tuned under near infrared range. The SGNPs have anisotropic and spiky morphology with 68 nm size and -58 mV surface charge and are pure, having adsorption of the organic material. Pseudomonas aeruginosa treated with synthesized SGNPs showed 60% bacterial death at the concentration of 100 µM. CONCLUSION: This work consists of novel synthesis of SGNPs via safe and simple reduction method. The synthesized SGNPs exhibit strong antibacterial activity against the Gram negative bacteria Pseudomonas aeruginosa measured using microplate assay test. The result showed that these SGNPs are ideal for biomedical applications.
Asunto(s)
Antiinfecciosos , Nanopartículas del Metal , Antibacterianos/farmacología , Oro , Pruebas de Sensibilidad Microbiana , Pseudomonas aeruginosaRESUMEN
In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96-98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.
Asunto(s)
Antifúngicos/farmacología , Aceite de Clavo/química , Nanopartículas/química , Aceite de Oliva/química , Terbinafina/farmacología , Administración Tópica , Animales , Antifúngicos/administración & dosificación , Antifúngicos/efectos adversos , Antifúngicos/farmacocinética , Química Farmacéutica , Portadores de Fármacos , Emulsiones/química , Concentración de Iones de Hidrógeno , Ratones , Tamaño de la Partícula , Absorción Cutánea/efectos de los fármacos , Solubilidad , Propiedades de Superficie , Terbinafina/administración & dosificación , Terbinafina/efectos adversos , Terbinafina/farmacocinética , ViscosidadRESUMEN
Background: Most of the traditional nanocarriers of cancer therapeutic moieties present dose-related toxicities due to the uptake of chemotherapeutic agents in normal body cells. The severe life-threatening effects of systemic chemotherapy are well documented. Doxorubicin, DOX is the most effective antineoplastic agent but with the least specific action that is responsible for severe cardiotoxicity and myelosuppression that necessitates careful monitoring while administering. Stimuli-sensitive/intelligent drug delivery systems, specifically those utilizing temperature as an external stimulus to activate the release of encapsulated drugs, have become a subject of recent research. Thus, it would be ideal to have a nanocarrier comprising safe excipients and controllable drug release capacity to deliver the drug at a particular site to minimize unwanted and toxic effects of chemotherapeutics. We have developed a simple temperature-responsive nanocarrier based on eutectic mixture of fatty acids. This study aimed to develop, physicochemically characterize and investigate the biological safety of eutectic mixture of fatty acids as a novel construct for temperature-responsive drug release potential. Methods: We have developed phase change material, PCM, based on a series of eutectic mixtures of fatty acids due to their unique and attractive physicochemical characteristics such as safety, stability, cost-effectiveness, and ease of availability. The reversible solid-liquid phase transition of PCM is responsible to hold firm or actively release the encapsulated drug. The eutectic mixtures of fatty acids (stearic acid and myristic acid) along with liquid lipid (oleic acid) were prepared to exhibit a tunable thermoresponsive platform. Doxorubicin-loaded lipid nanocarriers were successfully developed with combined hot melt encapsulation (HME) and sonication method and characterized to achieve enhanced permeability and retention (EPR) effect-based solid tumor targeting in response to exogenous temperature stimulus. The cytotoxicity against melanoma cell lines and in vivo safety studies in albino rats was also carried out. Results: Doxorubicin-loaded lipid nanocarriers have a narrow size distribution (94.59-219.3 nm), and a PDI (0.160-0.479) as demonstrated by photon correlation microscopy and excellent colloidal stability (Z.P value: -22.7 to -32.0) was developed. Transmission electron microscopy revealed their spherical morphology and characteristics of a monodispersed system. A biphasic drug release pattern with a triggered drug release at 41°C and 43°C and a sustained drug release was observed at 37°C. The thermoresponsive cytotoxic potential was demonstrated in B16F10 cancer cell lines. Hemolysis assay and acute toxicity studies with drug-free and doxorubicin lipid nanocarrier formulations provided evidence for their non-toxic nature. Conclusion: We have successfully developed a temperature-responsive tunable platform with excellent biocompatibility and intelligent drug release potential. The formulation components being from natural sources present superior characteristics in terms of cost, compatibility with normal body cells, and adaptability to preparation methods. The reported preparation method is adapted to avoid complex chemical processes and the use of organic solvents. The lipid nanocarriers with tunable thermoresponsive characteristics are promising biocompatible drug delivery systems for improved localized delivery of chemotherapeutic agents.
Asunto(s)
Ácidos Grasos , Neoplasias , Animales , Ratas , Doxorrubicina , Liberación de Fármacos , Ácidos Grasos/química , Microscopía Electrónica de Transmisión , TemperaturaRESUMEN
The continuing growth of bacterial resistance makes the top challenge for the healthcare system especially in bone-infections treatment. Current estimates reveal that in 2050 the death ratio caused by bacterial infections can be higher than cancer. The aim of this study is to provide an alternative to currently available bone-infection treatments. Here we designed mesoporous hydroxyapatite nanocarriers functionalized with citrate (Ctr-mpHANCs). Amoxicillin (AMX) is used as a model drug to load in Ctr-mpHANCs, and the drug loading was more than 90% due to the porous nature of nanocarriers. Scanning electron microscopy shows the roughly spherical morphology of nanocarriers, and the DLS study showed the approximate size of 92 nm. The Brunauer-Emmett-Teller (BET) specific surface area and pore diameter was found to be about 182.35 m2/g and 4.2 nm, respectively. We noticed that almost 100% of the drug is released from the AMX loaded Ctr-mpHANCs (AMX@Ctr-mpHANCs) in a pH-dependent manner within 3 d and 5 d at pH 2.0 and 4.5, respectively. The sustained drug release behaviour was observed for 15 d at pH 7.4 and no RBCs hemolysis by AMX@Ctr-mpHANCs. The broth dilution and colony forming unit (CFU) assays were used to determine the antimicrobial potential of AMX@Ctr-mpHANCs. It was observed in both studies that AMX@Ctr-mpHANCs showed a significant reduction in the bacterial growth of S. aureus, E. coli, and P. aeruginosa as compared to Ctr-mpHANCs with no bacteria-killing. Thus, we proposed that Ctr-mpHANCs can be used as a drug carrier and a treatment option for bone infections caused by bacteria.
RESUMEN
Nanotheranostics is an emerging frontier of personalized medicine research particularly for cancer, which is the second leading cause of death. Supramolecular aspects in theranostics are quite allured to achieve more regulation and controlled features. Supramolecular nanotheranostics architecture is focused on engineering of modular supramolecular assemblies benefitting from their mutable and stimuli-responsive properties which confer an ultimate potential for the fabrication of unified innovative nanomedicines with controlled features. Amalgamation of supramolecular approaches to nano-based features further equip the potential of designing novel approaches to overcome limitations seen by the conventional theranostic strategies, for curing even the lethal diseases and endowing personalized therapeutics with optimistic prognosis, endorsing their clinical translation. Among many potential nanocarriers for theranostics, lipid nanoparticles (LNPs) have shown various promising advances in theranostics and their formulation can be tailored for several applications. Despite the great advancement in cancer nanotheranostics, there are still many challenges that need to be highlighted to fill the literature gap. For this purpose, herein, we have presented a systematic overview on the subject and proposed LNPs as the potential material to manage cancer via non-invasive approaches by highlighting the use of supramolecular approaches to make them robust for cancer theranostics. We have concluded the review by entailing the future perspectives of lipid nanotheranostics towards clinical translation.
RESUMEN
Increasing drift in antimicrobial therapy failure against Mycobacterium tuberculosis, the causative agent of tuberculosis (TB), and the advent of extended resistant strains strongly demand discovery of mechanisms underlying development of drug resistance. The emergence of resistance against anti-TB drugs has reached an alarming level in various parts of the world, providing an active platform for the design of new targeted drug delivery. Reactive oxygen species (ROS) have an important role in controlling TB pathogenesis. At macrophage activation, ROS that are produced inside macrophages directly kill resident bacteria. These ROS possess a dual character because they can kill macrophages along with the resident bacteria. Targeting these ROS can play a remarkable part in overcoming resistance of conventional drugs. Nanoparticles (NPs) have evolved as a potential drug carrier for targeted delivery and elimination of various resistance mechanisms against antimicrobials. Receptor-mediated targeting of macrophages via different NPs may be a promising strategy for combating drug resistance and enhancing efficacy of old-fashioned antimycobacterial agents.
Asunto(s)
Antituberculosos/farmacología , Portadores de Fármacos/química , Mycobacterium tuberculosis/efectos de los fármacos , Nanopartículas/química , Tuberculosis/tratamiento farmacológico , Antituberculosos/uso terapéutico , Ensayos Clínicos como Asunto , Farmacorresistencia Bacteriana , Carga Global de Enfermedades , Humanos , Activación de Macrófagos/efectos de los fármacos , Macrófagos/inmunología , Macrófagos/metabolismo , Mycobacterium tuberculosis/inmunología , Especies Reactivas de Oxígeno/agonistas , Especies Reactivas de Oxígeno/antagonistas & inhibidores , Especies Reactivas de Oxígeno/metabolismo , Resultado del Tratamiento , Tuberculosis/epidemiología , Tuberculosis/microbiologíaRESUMEN
INTRODUCTION: Polymeric nanoparticles are potential carriers for the efficient delivery of hydrophilic and hydrophobic drugs due to their multifaceted applications. Docetaxel is relatively less hydrophobic and twice as potent as paclitaxel. Like other taxane chemotherapeutic agents, docetaxel is not well tolerated and shows toxicity in the patients. Nanoencapsulation of potent chemotherapeutic agents has been shown to improve tolerability and therapeutic outcome. Therefore, the present study was designed to fabricate chitosan and sodium tripolyphosphate (STPP) based on ionically cross-linked nanoparticles for sustained release of docetaxel. METHODS: Nanoparticles were prepared by the ionic-gelation method by dropwise addition of the STPP solution into the chitosan solution in different ratios. CNPs were characterized for post-formulation parameters like size, zeta potential, scanning electron microscope (SEM), FTIR, DSC/TGA, pXRD, and in-vitro drug release, as well as for acute oral toxicity studies in Wistar rats. RESULTS AND DISCUSSION: The optimized docetaxel loaded polymeric nanoparticles were in the size range (172.6nm-479.65 nm), and zeta potential (30.45-35.95 mV) required to achieve enhanced permeation and retention effect. In addition, scanning electron microscopy revealed rough and porous surface, whereas, FTIR revealed the compatible polymeric nanoparticles. Likewise, the thermal stability was ensured through DSC and TG analysis, and powder X-ray diffraction analysis exhibited solid-state stability of the docetaxel loaded nanoparticles. The in-vitro drug release evaluation in phosphate buffer saline (pH 7.4) showed sustained release pattern, i.e. 51.57-69.93% within 24 hrs. The data were fitted to different release kinetic models which showed Fickian diffusion as a predominant release mechanism (R2 = 0.9734-0.9786, n= 0.264-0.340). Acceptable tolerability was exhibited by acute oral toxicity in rabbits and no abnormality was noted in growth, behavior, blood biochemistry or histology and function of vital organs. CONCLUSION: Ionically cross-linked chitosan nanoparticles are non-toxic and biocompatible drug delivery systems for sustained release of chemotherapeutic agents, such as docetaxel.
Asunto(s)
Antineoplásicos/administración & dosificación , Quitosano/química , Docetaxel/administración & dosificación , Sistemas de Liberación de Medicamentos/métodos , Nanopartículas/química , Administración Oral , Animales , Antineoplásicos/farmacocinética , Antineoplásicos/toxicidad , Reactivos de Enlaces Cruzados/química , Docetaxel/farmacocinética , Docetaxel/toxicidad , Liberación de Fármacos , Masculino , Nanopartículas/administración & dosificación , Polifosfatos/química , Conejos , Ratas Wistar , Solubilidad , Pruebas de Toxicidad AgudaRESUMEN
Background: Lipid polymer hybrid nanoparticles (LPHNPs) for the controlled delivery of hydrophilic doxorubicin hydrochloride (DOX.HCl) and lipophilic DOX base have been fabricated by the single step modified nanoprecipitation method. Materials and methods: Poly (D, L-lactide-co-glicolide) (PLGA), lecithin, and 1,2-distearoyl-Sn-glycero-3-phosphoethanolamine-N-[methoxy (polyethylene glycol)-2000 (DSPE-PEG 2000) were selected as structural components. Results: The mean particle size was 173-208 nm, with an encapsulation efficiency of 17.8±1.9 to 43.8±4.4% and 40.3±0.6 to 59. 8±1.4% for DOX.HCl and DOX base, respectively. The drug release profile was in the range 33-57% in 24 hours and followed the Higuchi model (R2=0.9867-0.9450) and Fickian diffusion (n<0.5). However, the release of DOX base was slower than DOX.HCl. The in vitro cytotoxicity studies and confocal imaging showed safety, good biocompatibility, and a higher degree of particle internalization. The higher internalization of DOX base was attributed to higher permeability of lipophilic component and better hydrophobic interaction of particles with cell membranes. Compared to the free DOX, the DOX.HCl and DOX base loaded LPHNPs showed higher antiproliferation effects in MDA-MB231 and PC3 cells. Conclusion: Therefore, LPHNPs have provided a potential drug delivery strategy for safe, controlled delivery of both hydrophilic and lipophilic form of DOX in cancer cells.
Asunto(s)
Neoplasias de la Mama/tratamiento farmacológico , Doxorrubicina/uso terapéutico , Interacciones Hidrofóbicas e Hidrofílicas , Lípidos/química , Nanopartículas/química , Polímeros/química , Rastreo Diferencial de Calorimetría , Muerte Celular/efectos de los fármacos , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Coloides/química , Doxorrubicina/farmacología , Liberación de Fármacos , Femenino , Humanos , Cinética , Nanopartículas/ultraestructura , Tamaño de la Partícula , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Espectroscopía Infrarroja por Transformada de Fourier , Electricidad EstáticaRESUMEN
INTRODUCTION: Titanium-based materials do not fulfill all of the requirements of orthopedic implants due to a mismatch in mechanical properties with bone which are prone to change during the course of bone growth. Biofunctional biomaterials are a new class of materials that show bioactivity and adaptability at any stage of bone growth. AREAS COVERED: Different biofunctional biomaterials have evolved over time that can enhance calcium phosphate (CaP) precipitation, stimulate osteogenic differentiation, and can control osteoblast gene expression. These materials include metals or metal alloys, ceramics, polymers and biocomposites. Similarly, naturally-inspired nanomaterials and nanometer surface featured modified materials can enhance bone growth if created to match bone's unique micro to nano hierarchical structure. Nanoscale manipulation of existing biomaterials can incorporate antimicrobial properties which is desirable to prevent infection and failure of orthopedic devices. EXPERT COMMENTARY: Recent research trends in biofunctional biomaterials have focused to, first, understand the bone growth mechanism and, then, mimic natural bone architecture using biomaterials. Therefore, an enhanced understanding of material properties and tissue engineering principles will lead the way forward designing biofunctional biomaterials. In the future, the role of biofunctional biomaterials and orthopedic sensors will be more pronounced in terms of musculoskeletal disease prevention, diagnosis, and treatment.