Preparation and characterization of lutein loaded folate conjugated polymeric nanoparticles.

AIM: To prepare and characterise lutein-loaded polylactide-co-glycolide-polyethylene glycol-folate (PLGA-PEG-FOLATE) nanoparticles and evaluate enhanced uptake in SK-N-BE(2) cells. METHODS: Nanoparticles were prepared using O/W emulsion solvent evaporation and characterised using DLS, SEM, DSC, FTIR and in-vitro release. Lutein-uptake in SK-N-BE(2) cells was determined using flow-cytometry, confocal-microscopy and HPLC. Control was lutein PLGA nanoparticles. RESULTS: The size of lutein-loaded PLGA and PLGA-PEG-FOLATE nanoparticles were 189.6 ± 18.79 nm and 188.0 ± 4.06 nm, respectively. Lutein entrapment was ∼61%(w/w) and ∼73%(w/w) for PLGA and PLGA-PEG-FOLATE nanoparticles, respectively. DSC and FTIR confirmed encapsulation of lutein into nanoparticles. Cellular uptake studies showed ∼1.6 and ∼2-fold enhanced uptake of lutein from PLGA-PEG-FOLATE nanoparticles compared to PLGA nanoparticles and lutein, respectively. Cumulative release of lutein was higher in PLGA nanoparticles (100% (w/w) within 24 h) compared to PLGA-PEG-FOLATE nanoparticles (∼80% (w/w) in 48 h). CONCLUSION: Lutein-loaded PLGA-PEG-FOLATE nanoparticles could be a potential treatment for hypoxic ischaemic encephalopathy.

A comprehensive review of cytochrome P450 2E1 for xenobiotic metabolism.

Cytochrome P450 2E1 (CYP2E1) plays a vital role in drug-induced hepatotoxicity and cancers (e.g. lung and bladder cancer), since it is responsible for metabolizing a number of medications and environmental toxins to reactive intermediate metabolites. CYP2E1 was recently found to be the highest expressed CYP enzyme in human livers using a proteomics approach, and CYP2E1-related toxicity is strongly associated with its protein level that shows significant inter-individual variability related to ethnicity, age, and sex. Furthermore, the expression of CYP2E1 demonstrates regulation by extensive genetic polymorphism, endogenous hormones, cytokines, xenobiotics, and varying pathological states. Over the past decade, the knowledge of pharmacology, toxicology, and biology about CYP2E1 has grown remarkably, but the research progress has yet to be summarized. This study presents a timely systematic review on CYP2E1's xenobiotic metabolism, genetic polymorphism, and inhibitors, with the focus on their clinical relevance for the efficacy and toxicity of various CYP2E1 substrates. Moreover, several knowledge gaps have been identified towards fully understanding the potential interactions among different CYP2E1 substrates in clinical settings. Through in-depth analyses of these knowns and unknowns, we expect this review will aid in future drug development and improve management of CYP2E1 related clinical toxicity.

Clotrimazole Loaded Ufosomes for Topical Delivery: Formulation Development and In-Vitro Studies.

Global incidence of superficial fungal infections caused by dermatophytes is high and affects around 40 million people. It is the fourth most common cause of infection. Clotrimazole, a broad spectrum imidazole antifungal agent is widely used to treat fungal infections. Conventional topical formulations of clotrimazole are intended to treat infections by effective penetration of drugs into the stratum corneum. However, drawbacks such as poor dermal bioavailability, poor penetration, and variable drug levels limit the efficiency. The present study aims to load clotrimazole into ufosomes and evaluate its topical bioavailability. Clotrimazole loaded ufosomes were prepared using cholesterol and sodium oleate by thin film hydration technique and evaluated for size, polydispersity index, and entrapment efficiency to obtain optimized formulation. Optimized formulation was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). Skin diffusion studies and tape-stripping were performed using human skin to determine the amount of clotrimazole accumulated in different layers of the skin. Results showed that the optimized formulation had vesicle size <250 nm with ~84% entrapment efficiency. XRD and DSC confirmed the entrapment of clotrimazole into ufosomes. No permeation was observed through the skin up to 24 h following the permeation studies. Tape-stripping revealed that ufosomes led to accumulation of more clotrimazole in the skin compared to marketed formulation (Perrigo). Overall, results revealed the capability of ufosomes in improving the skin bioavailability of clotrimazole.

Enhancing targeted antibiotic therapy via pH responsive solid lipid nanoparticles from an acid cleavable lipid.

An acid cleavable lipid (SA-3M) was synthesized and used to develop pH-responsive solid lipid nanoparticles (SLNs) to deliver vancomycin base (VM-FB) to acidic infection sites. The size, polydispersity index and zeta potential of VM-FB_SA-3M_SLNs were 132.9±9.1nm, 0.159±0.01 and -26±4.4mV respectively, with 57.80±1.1% encapsulation efficiency. VM-FB release was significantly faster at pH6.5 than pH7.4. In vitro antibacterial activity against methicillin-susceptible and resistant Staphylococcus aureus (MSSA and MRSA) revealed that SLNs had enhanced activity at pH6.5 than pH7.4. In vivo study showed that the amount of MRSA remaining in the skin of VM-FB_SA-3M_SLNs treated mice was approximately 22-fold lower than VM-FB treated mice. Histological investigations revealed that signs of inflammation in the skin treated with VM-FB_SA-3M_SLNs were minimal. In conclusion, this study confirmed that SA-3M can form pH-responsive SLNs capable of releasing antibiotic specifically at acidic infection sites.

Design and Preclinical Evaluation of Nicotine-Stearic Acid Conjugate-Loaded Solid Lipid Nanoparticles for Transdermal Delivery: A Technical Note.

This study aimed to develop and evaluate nicotine--stearic acid conjugate-loaded solid lipid nanoparticles (NSA-SLNs) for transdermal delivery in nicotine replacement therapy (NRT). Nicotine conjugation to stearic acid prior to SLN formulation greatly increased drug loading. SLNs loaded with a nicotine-stearic acid conjugate were characterized for size, polydispersity index (PDI), zeta potential (ZP), entrapment efficiency, and morphology. Pilot in vivo testing was carried out in New Zealand Albino rabbits. The size, PDI, and ZP of nicotine-stearic acid conjugate-loaded SLNs were 113.5 ± 0.91 nm, 0.211 ± 0.01, and -48.1 ± 5.75 mV, respectively. The entrapment efficiency of nicotine-stearic acid conjugate in SLNs was 46.45 ± 1.53%. TEM images revealed that optimized nicotine-stearic acid conjugate-loaded SLNs were uniform and roughly spherical in shape. Nicotine-stearic acid conjugate-loaded SLNs showed enhanced and sustained drug levels for up to 96 h in rabbits when compared with the control nicotine formulation in 2% HPMC gel. To conclude, the reported NSA-SLNs could be further explored as an alternative for treating smoking cessation.

Advances in in-vitro bioequivalence testing methods for complex ophthalmic generic products.

The United States Food and Drug Administration (USFDA) demands that the generic industry prove topical ocular products' pharmaceutical and bioequivalence (BE). In contrast to generic oral drugs, topical ocular product BE testing has proved difficult. New generic versions are compared to an authorized drug product known as a Reference Listed Drug (RLD) to demonstrate their bioequivalence. If the excellent in-vitro results may support the presumption of equivalence in-vivo performance and the only clinically significant difference between the generic and RLD is in its physicochemical qualities and drug release rate, then in-vivo BE studies may be waived. Proving BE through dissolution tests is a golden standard for most conventional dosage forms. However, due to the limited number of biorelevant in-vitro drug release testing (IVRT) approaches capable of differentiating their performance based on product quality and physicochemical properties, the development of generic ophthalmic products has been slow and time-consuming. Often, BE of topical ophthalmic formulations cannot be proved using a single in-vitro test; therefore, an elaborated discussion on various IVRT methods performed to demonstrate bioequivalence of complex generis like ophthalmic emulsions, suspensions, ointments, and gels is necessary. This manuscript aims to review the status of biowaiver criteria for complex ophthalmic products concerning the product-specific FDA guidance to the generic industry.

Percutaneous Absorption of Lorazepam, Diphenhydramine Hydrochloride, and Haloperidol from ABH Gel.

The objective of this project was to study the percutaneous absorption of lorazepam, diphenhydramine hydrochloride, and haloperidol from a topical Pluronic lecithin organogel, also known as ABH gel, across the porcine ear skin and verify its suitability for topical application. ABH gel was prepared using lecithin in isopropyl palmitate solution (1:1) as an oil phase and 20% w/v Poloxamer 407 solution as an aqueous phase. The gel was characterized for pH, viscosity, drug content, and thermal behavior. A robust high-performance liquid chromatography method was developed and validated for simultaneous analysis of lorazepam, diphenhydramine hydrochloride, and haloperidol. The percutaneous absorption of lorazepam, diphenhydramine hydrochloride, and haloperidol from ABH gel was carried out using Franz cells across the Strat-M membrane and pig ear skin. The pH of ABH gel was found to be 5.66 ± 0.13. The retention time of diphenhydramine hydrochloride, haloperidol, and lorazepam was found to be 5.2 minutes, 7.8 minutes, and 18.9 minutes, respectively. The ABH gel was found to be stable for up to 30 days. Theoretical steady state plasma concentrations (CSS) of diphenhydramine hydrochloride, haloperidol, and lorazepam calculated from flux values were found to be 1.6 ng/mL, 0.13 ng/mL, and 2.30 ng/mL, respectively. The theoretical CSS of diphenhydramine hydrochloride, haloperidol, and lorazepam were much lower than required therapeutic concentrations for antiemetic activity to relieve chemotherapy-induced nausea and vomiting. From the percutaneous absorption data, it was evident that ABH gel failed to achieve required systemic levels of lorazepam, diphenhydramine hydrochloride, and haloperidol following topical application.

Evaluation of Formulation Parameters on Permeation of Ibuprofen from Topical Formulations Using Strat-M® Membrane.

Topical drug delivery is an attractive alternative to conventional methods because of advantages such as non-invasive delivery, by-pass of first pass metabolism, and improved patient compliance. However, several factors such as skin, physicochemical properties of the drug, and vehicle characteristics influence the permeation. Within a formulation, critical factors such as concentration of drug, physical state of drug in the formulation, and organoleptic properties affect the flux across the skin. The aim of the study was to develop and investigate topical semisolid preparations (creams and gels) with ibuprofen as the model drug and investigate the effect of various formulation parameters on the in-vitro performance across the Strat-M® membrane using flow-through cells. In addition, the physical stability of the developed formulations was investigated by studying viscosity, pH, and appearance. All the formulations developed in the study had appealing appearance with smooth texture and no signs of separation. Viscosity and pH of the formulations were acceptable. Cumulative amount of drug permeated at the end of 24 h was highest for clear gel (3% w/w ibuprofen; F6: 739.6 ± 36.1 µg/cm2) followed by cream with high concentration of ibuprofen in suspended form (5% w/w; F3: 320.8 ± 17.53 µg/cm2), emulgel (3% w/w ibuprofen; F5: 178.5 ± 34.5 µg/cm2), and cream with solubilized ibuprofen (3% w/w; F2A: 163.2 ± 9.36 µg/cm2). Results from this study showed that permeation of ibuprofen was significantly influenced by formulation parameters such as concentration of ibuprofen (3% vs. 5% w/w), physical state of ibuprofen (solubilized vs. suspended), formulation type (cream vs. gel), mucoadhesive agents, and viscosity (high vs. low). Thus, findings from this study indicate that pharmaceutical formulation scientists should explore these critical factors during the early development of any new topical drug product in order to meet pre-determined quality target product profile.

Alternatives to Biological Skin in Permeation Studies: Current Trends and Possibilities.

: The transdermal route of drugs has received increased attention in recent years due to numerous advantages over the oral and injectable routes, such as avoidance of the hepatic metabolism, protection of drugs from the gastrointestinal tract, sustained drug delivery, and good patient compliance. The assessment of ex vivo permeation during the pharmaceutical development process helps in understanding the product quality and performance of a transdermal delivery system. Generally, excised human skin relevant to the application site or animal skin is recommended for ex vivo permeation studies. However, the limited availability of the human skin and ethical issues surrounding the use of animal skin rendered these models less attractive in the permeation study. In the last three decades, enormous efforts have been put into developing artificial membranes and 3D cultured human skin models as surrogates to the human skin. This manuscript provides an insight on the European Medicines Agency (EMA) guidelines for permeation studies and the parameters affected when using Franz diffusion cells in the permeation study. The need and possibilities for skin alternatives, such as artificially cultured human skin models, parallel artificial membrane permeability assays (PAMPA), and artificial membranes for penetration and permeation studies, are comprehensively discussed.

Lutein-Loaded, Biotin-Decorated Polymeric Nanoparticles Enhance Lutein Uptake in Retinal Cells.

Age related macular degeneration (AMD) is one of the leading causes of visual loss and is responsible for approximately 9% of global blindness. It is a progressive eye disorder seen in elderly people (>65 years) mainly affecting the macula. Lutein, a carotenoid, is an antioxidant, and has shown neuroprotective properties in the retina. However, lutein has poor bioavailability owing to poor aqueous solubility. Drug delivery to the posterior segment of the eye is challenging due to the blood-retina barrier. Retinal pigment epithelium (RPE) expresses the sodium-dependent multivitamin transporter (SMVT) transport system which selectively uptakes biotin by active transport. In this study, we aimed to enhance lutein uptake into retinal cells using PLGA-PEG-biotin nanoparticles. Lutein loaded polymeric nanoparticles were prepared using O/W solvent-evaporation method. Particle size and zeta potential (ZP) were determined using Malvern Zetasizer. Other characterizations included differential scanning calorimetry, FTIR, and in-vitro release studies. In-vitro uptake and cytotoxicity studies were conducted in ARPE-19 cells using flow cytometry and confocal microscopy. Lutein was successfully encapsulated into PLGA and PLGA-PEG-biotin nanoparticles (<250 nm) with uniform size distribution and high ZP. The entrapment efficiency of lutein was ≈56% and ≈75% for lutein-loaded PLGA and PLGA-PEG-biotin nanoparticles, respectively. FTIR and DSC confirmed encapsulation of lutein into nanoparticles. Cellular uptake studies in ARPE-19 cells confirmed a higher uptake of lutein with PLGA-PEG-biotin nanoparticles compared to PLGA nanoparticles and lutein alone. In vitro cytotoxicity results confirmed that the nanoparticles were safe, effective, and non-toxic. Findings from this study suggest that lutein-loaded PLGA-PEG-biotin nanoparticles can be potentially used for treatment of AMD for higher lutein uptake.

Selection of Cryoprotectant in Lyophilization of Progesterone-Loaded Stearic Acid Solid Lipid Nanoparticles.

Cryoprotectants are often required in lyophilization to reduce or eliminate agglomeration of solute or suspended materials. The aim of this study was to select a cryoprotecting agent and optimize its concentration in a solid lipid nanoparticle formulation. Progesterone-loaded stearic acid solid lipid nanoparticles (SA-P SLNs) were prepared by hot homogenization with high speed mixing and sonication. The stearic acid content was 4.6% w/w and progesterone was 0.46% w/w of the initial formulation. Multiple surfactants were evaluated, and a lecithin and sodium taurocholate system was chosen. Three concentrations of surfactant were then evaluated, and a concentration of 2% w/w was chosen based on particle size, polydispersity, and zeta potential. Agglomeration of SA-P SLNs after lyophilization was observed as measured by increased particle size. Dextran, glycine, mannitol, polyvinylpyrrolidone (PVP), sorbitol, and trehalose were evaluated as cryoprotectants by both an initial freeze-thaw analysis and after lyophilization. Once selected as the cryoprotectant, trehalose was evaluated at 5%, 10%, 15%, and 20% for optimal concentration, with 20% trehalose being finally selected as the level of choice. Evaluation by DSC confirmed intimate interaction between stearic acid and progesterone in the SA-P SLNs, and polarized light microscopy shows successful lyophilization of the trehalose/SA-P SLN. A short term 28-day stability study suggests the need for refrigeration of the final lyophilized SA-P SLNs in moisture vapor impermeable packaging.

Biocompatible SPME fibers for direct monitoring of nicotine and its metabolites at ultra trace concentration in rabbit plasma following the application of smoking cessation formulations.

The ultra-trace determination of nicotine and its 4 major metabolites (cotinine, nornicotine, norcotinine and anabasine) from rabbit plasma was achieved by a newly developed solid phase microextraction-liquid chromatography-tandem mass spectrometry method. Extraction of the target analytes was performed with hydrophilic/lipophilic balance-polyacrylonitrile SPME fibers. Dual fiber extraction was necessary to guarantee improved recovery at parts-per-trillion levels. Liquid chromatographic analysis was achieved in a 6-min run using a C18 (1.9 µm C18, 50 mm x 2.1 mm) column with a mobile phase flow rate of 0.4 mL/min. Tandem mass spectrometry was used for detection and quantification in positive electrospray ionization (ESI+) mode for all the targeted analytes. Two stable isotope-labeled internal standards were used for signal correction and accurate quantification. The mass spectrometer with laminar flow ion flux transport, guaranteed improved signal stability, minimal contamination of the ion guide and reproducibility into the first quadrupole analyzer. The method was validated in line with the Food and Drug Administration (FDA) guidelines for bioanalytical method validation. The results met the acceptance criteria as proposed by the FDA: accuracy was tested at 0.35, 10 and 75 µg L - 1 and ranged between 98.3-112.2% for nicotine, 94.1-101.9% for cotinine, 94.7-107.0% for nornicotine, 81.1-107.2% for norcotinine and 94.3-115.2% for anabasine, with precision up to 14.2%. Stability tests indicated that all the targeted analytes were stable in the desorption solution for at least 1 week. LOQs ranged from 0.05 to 1 µg L-1. The method was successfully applied to analyze plasma samples obtained from rabbits following transdermal application of a smoking cessation formulation loaded with solid lipid nanoparticles containing a nicotine-stearic acid conjugate.

Evaluation of Cytotoxicity and Taste-Masking Effect of Selected Flavors on Dental Lidocaine HCl Injection.

AIM: Anxiety and intolerance to dental local anesthetic injections are common in patients undergoing dental procedures. This work was designed to study cytotoxicity of selected flavors in primary gingival keratinocytes (PGK), to acquire information on their suitability for use in dental lidocaine hydrochloride (LID) injection. We also evaluated the bio-mimetic taste of LID dental injection in the presence of selected flavors and sweetener using an Astree electronic tongue (ETongue). METHODS: The cytotoxicity of chocolate natural and artificial flavor (CTE), raspberry flavor artificial (RAS), cherry flavor (CHR), bitterness suppressor flavor (BSF) and lemon flavor extract (LFE) at various dilutions (0.16-10% v/v) was carried out in PGK using the live cell morphological analysis and MTT cell cytotoxicity assay. Based on the cytotoxicity data, CTE and RAS were added to Xylocaine® (2%) along with 0.09% sodium saccharin and taste was assessed using an ETongue. RESULTS: After three hours of treatment, a dose-dependent cell death was induced by all flavors compared to the untreated control. BSF was found to be more toxic when compared to other flavors. CTE was found to be less toxic. The mean IC50 values of CTE, RAS, CHR, BSF and LFE in PGK were found to be 9.54, 8.43, 2.21, 0.38 and 4.01 mg/mL. Taste analysis with the ETongue showed a clear taste difference between the control and test formulations containing CTE and RAS flavors along with sodium saccharin. CONCLUSION: CTE and RAS flavors in combination with 0.09% sodium saccharin can achieve a significant taste-masking effect in the dental LID injection.

Advances in Ultrasound Mediated Transdermal Drug Delivery.

Low frequency ultrasound-assisted drug delivery has been widely investigated as a non-invasive method to enhance the transdermal penetration of drugs. Using this technique, a brief application of ultrasound is used to permeabilize skin for a prolonged time. In this review, an overview on ultrasound is detailed to help explain the parameters that could be modulated to obtain the desired ultrasound parameters for enhanced transdermal drug delivery. The mechanisms of enhancement and the latest developments in the area of ultrasound-assisted transdermal drug delivery are discussed. Special emphasis is placed on the effects of ultrasound when used in combination with microneedles, electroporation and iontophoresis, and penetration enhancers. Further, this review summarizes the effect of ultrasound on skin integrity and the regulatory requirements for commercialization of the ultrasound based transdermal delivery instruments.

Thermo- and pH dual responsive polymeric micelles and nanoparticles.

A new generation of the more effective polymeric micelle and nanoparticle drug delivery systems evolved due to the emergence of stimuli-responsive polymers. Among various stimuli, pH and temperature are most widely studied for enhanced drug release at the site of action. Researchers are focusing on dual (pH and temperature) responsive polymeric micelles and nanoparticles for controlled and enhanced drug release at the site of action. These dual responsive systems are mainly evaluated for cancer therapy as certain malignancies can cause a slight increase in temperature and decrease in extracellular pH around the tumor site. Fabrication of dual responsive polymeric micelles and nanoparticles has been possible for drug delivery and imaging purposes; due to advancement in the synthesis of non-toxic dual pH- and thermo-responsive polymers. Adequately designed polymeric micelles and nanoparticles sensitive to both pH and temperature can achieve better targeting and treatment. These systems can be very efficient due to their ability to wisely distinguish between pathological and healthy tissues. Our review manuscript's primary focus is on pH- and thermo-dual responsive polymeric nanoparticles and micelles for application in precision drug delivery.

FSE-Ag complex NS: preparation and evaluation of antibacterial activity.

Silver (Ag) complexes of drugs and their nanosystems have great potential as antibacterials. Recently, an Ag complex of furosemide (Ag-FSE) has shown to be a promising antimicrobial. However, poor solubility of Ag-FSE could hamper its introduction into clinics. Therefore, the authors developed a nanosuspension of Ag-FSE (Ag-FSE_NS) for its solubility and antibacterial activity enhancement. The aim of this study was to introduce a novel nanoantibiotic with enhanced antibacterial efficacy. Ag-FSE_NS was prepared by precipitation-ultrasonication technique. Size, polydispersity index (PI) and zeta potential (ZP) of prepared Ag-FSE_NS were measured by dynamic light scattering, whereas surface morphology was determined using scanning electron microscopy (SEM). In vitro antibacterial activity was evaluated against Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa using broth microdilution method. Size, PI and ZP of optimised Ag-FSE_NS1 were 191.2 ± 19.34 nm, 0.465 ± 0.059 and -55.7 ± 8.18 mV, respectively. SEM revealed that Ag-FSE_NS1 particles were rod or needle-like with smooth surfaces. Saturation solubility of Ag-FSE in NS increased eight-fold than pure Ag-FSE. Ag-FSE_NS1 exhibited two-fold and eight-fold enhancements in activity against E. coli and S. aureus, respectively. The results obtained showed that developed Ag-FSE_NS1 holds a promise as a topical antibacterial.

pH-responsive chitosan nanoparticles from a novel twin-chain anionic amphiphile for controlled and targeted delivery of vancomycin.

The design and synthesis of novel pH-responsive nanoantibiotics is an emerging research area to address the antibiotic resistance crisis. The purpose of this study was therefore to synthesize a new anionic gemini surfactant (AGS) that could result in the formulation of pH-responsive chitosan nanoparticles (CSNPs) to treat methicillin-resistant Staphylococcus aureus (MRSA) infections. The coupling of oleic acid with 2,2-dimethyl-5,5-bis(hydroxymethyl)-1,3-dioxane and subsequent deprotection followed by a reaction with succinic anhydride and sodium bicarbonate yielded AGS. Critical micelle concentration (CMC) was determined using conductometry and in vitro cytotoxicity was performed using a MTT assay. Vancomycin loaded CSNPs containing AGS (DL_CSSNPs) were prepared by ionotropic gelation of chitosan with pentasodium tripolyphosphate. CSNPs were characterized for size, polydispersity index (PDI), zeta potential (ZP), entrapment efficiency, surface morphology, in vitro drug release and in vitro antibacterial activity (at pH 6.5 and 7.4). Results from the in vitro antibacterial activity were further supported by an in vivo study using a mice skin infection model. The CMC of AGS was found to be 1.3mM/L and it was non-toxic. The DL_CSSNPs were spherical with size, PDI and ZP of 220.57±5.9nm, 0.299±0.004 and 21.9±0.9mV respectively. An increase in the vancomycin release from the DL_CSSNPs was observed at pH 6.5 compared to pH 7.4. The minimum inhibitory concentration values at pH 6.5 and 7.4 against MRSA were 7.81 and 62.5µg/ml respectively. In vivo antibacterial activity showed that the MRSA burden in mice treated with DL_CSSNPs was reduced by almost 8-fold compared to those treated with pure vancomycin.

Approaches for enhancing oral bioavailability of peptides and proteins.

Oral delivery of peptide and protein drugs faces immense challenge partially due to the gastrointestinal (GI) environment. In spite of considerable efforts by industrial and academic laboratories, no major breakthrough in the effective oral delivery of polypeptides and proteins has been accomplished. Upon oral administration, gastrointestinal epithelium acts as a physical and biochemical barrier for absorption of proteins resulting in low bioavailability (typically less than 1-2%). An ideal oral drug delivery system should be capable of (a) maintaining the integrity of protein molecules until it reaches the site of absorption, (b) releasing the drug at the target absorption site, where the delivery system appends to that site by virtue of specific interaction, and (c) retaining inside the gastrointestinal tract irrespective of its transitory constraints. Various technologies have been explored to overcome the problems associated with the oral delivery of macromolecules such as insulin, gonadotropin-releasing hormones, calcitonin, human growth factor, vaccines, enkephalins, and interferons, all of which met with limited success. This review article intends to summarize the physiological barriers to oral delivery of peptides and proteins and novel pharmaceutical approaches to circumvent these barriers and enhance oral bioavailability of these macromolecules.