Structural determination of four manufacturing impurities of D&C Red No. 33.

Four manufacturing impurities of D&C Red No. 33 isolated by counter-current chromatography were analyzed by NMR and ESI mass spectrometry. Three of these impurities were reported previously with minimal details of structural determination. All four are structurally related to the main component of the dye. The fourth exhibited an unusual discrepancy between the NMR structure and its chemical formula suggested by ESI-MS results. Structural determination and assignment of the main component and four impurities are discussed as well as resolution of the discrepancy between the NMR and ESI-MS results of the fourth impurity.

Isolation and characterization of roridin E.

The commonly occurring, high-cytotoxicity macrolide roridin E has been re-isolated from Stachybotrys chartarum and characterized by 1-D and 2-D NMR spectroscopy. Assignment of the spectral data for roridin E revealed differences from the accepted literature, and spectra are reported herein to aid in future identification. For the first time confirmation of structure was provided by a crystallographic solution for roridin E. Copyright © 2016 John Wiley & Sons, Ltd.

Application of a computer-assisted structure elucidation program for the structural determination of a new terpenoid aldehyde with an unusual skeleton.

The structure of a novel compound from Adansonia digitata has been elucidated, and its 1 H and 13 C NMR spectra have been assigned employing a variety of one-dimensional and two-dimensional NMR techniques without degradative chemistry. The Advanced Chemistry Development ACD/Structure Elucidator software was important for determining part of this structure that contained a fused bicyclic system with very few hydrogen atoms, which in turn, exhibited essentially no discriminating HMBC connectivities throughout that portion of the molecule. Copyright © 2016 John Wiley & Sons, Ltd.

Sesquiterpenoid tropolone glycosides from Liriosma ovata.

Two new sesquiterpenoid tropolone glycosides, liriosmasides A (1) and B (2), along with two known compounds, secoxyloganin and oplopanpheside C, were isolated from a methanol extract of the roots of Liriosma ovata. The structures of 1 and 2 were elucidated by spectroscopic methods including 1D and 2D NMR and by high-resolution mass spectrometry involving an ultra-high-performance liquid chromatography-quadrupole-orbital ion trap mass spectrometric (UHPLC-Q-Orbitrap MS) method. Compound 1 showed weak inhibitory activity against HIV RNase H.

Spatially encoded multiple-quantum excitation.

In this work, we present a simple method to spatially encode the transition frequencies of nuclear spin transitions and to read out these frequencies within a single scan. The experiment works by combining pulsed field gradients with an excitation sequence that selectively excites spin transitions within certain sample regions. After the initial excitation, imaging the resulting z-magnetization is used to determine the locations where the excitations occurred, from which the corresponding transition frequencies are determined. Simple experimental demonstrations of this technique on one- and two-spin systems are presented.

Fluorescent stilbazolium dyes as probes of the norepinephrine transporter: structural insights into substrate binding.

We report the synthesis, binding kinetics, optical spectroscopy and predicted binding modes of a series of sterically demanding, fluorescent norepinephrine transporter (NET) ligands. A series of bulky stilbazolium dyes, including six newly synthesized compounds, were evaluated to determine the effect of extending the molecular probes' 'heads' or 'tails'. Taking advantage of the dyes' characteristic 'turn-on' emission, the kinetic binding parameters, k(on) and k(off) were determined revealing that extension of the molecules' tails is well tolerated while expansion of the head is not. Additionally, a 'headfirst' orientation appears to be preferred over a 'tail-first' binding pose. Further details of the possible binding modes were obtained from the emission spectra of the bound probes. A small range of interplanar twist angles, approximately 35° to 60°, is predicted to produce the observed emission. Docking experiments and molecular modelling support the kinetic and spectroscopic data providing structural insights into substrate binding.

Extraction and analysis of an organophosphate salt nucleating agent from irradiated polypropylene resin.

Although it is well-established that irradiation of produce can reduce food-borne pathogens and spoilage organisms, data on the effect of irradiation on polymer additives in food packaging materials are limited, particularly for those additives used in packaging leafy greens or in current food packaging materials. We investigated the effects of irradiating a nucleating agent, aluminium, hydroxybis[2,4,8,10-tetrakis(1,1-dimethylethyl)-6-hydroxy-12H-dibenzo [d,g][1,3,2]dioxaphosphocin 6-oxidato]- (CAS Reg. No. 151841-65-5), at doses of 1-20 kGy in polypropylene. That nucleating agent was then extracted using accelerated solvent extraction and analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), liquid chromatography-photodiode array detection (LC-PDA), and solid-state nuclear magnetic resonance (SSNMR) spectroscopy. We found this nucleating agent was not significantly affected by radiation treatment up to 20 kGy. Therefore, this nucleating agent could potentially be useful in food packaging materials that will be irradiated at doses of 20 kGy or less. Establishing which additives are stable under anticipated irradiation doses will help support safety evaluation of food packaging materials.

Identification, separation by spiral high-speed counter-current chromatography, and quantification of 7-chloro-5-methyl-2H-1,4-benzothiazin-3(4H)-one, an impurity in the thioindigoid color additive D&C Red No. 30 and its lakes.

An impurity in the color additives D&C Red No. 30 (R30) and D&C Red No. 30 lakes (R30L) was newly identified and characterized as 7-chloro-5-methyl-2H-1,4-benzothiazin-3(4H)-one (BTZ), and its extent and level in certified batches of these color additives was determined. BTZ was extracted from the dye with ethanol, resulting in a crude extract enriched to a concentration of over 60%. BTZ was then separated from a portion of the enriched extract by high-speed counter-current chromatography using a spiral-tube assembly column with intermittently pressed tubing of 60 ml capacity. It was the first reported use of such a column to separate a small, moderately hydrophobic compound. The two-phase solvent system was also moderately hydrophobic, consisting of hexane-ethyl acetate-methanol-water (5:2:5:2), and the retention of the organic stationary phase measured after the separation was 83.3%. The separation yielded BTZ of two purity grades, the higher of which (~95.5%) was used as a standard to quantify the impurity in 37 batches of R30 and R30L using an HPLC method developed and validated for that purpose. Analyses revealed a wide range of BTZ levels across batches, <0.05 - 0.84%, and suggested that BTZ contamination could be reduced by appropriate adjustments in the manufacturing process. An explanation of the likely source of BTZ - as a side-reaction product in a particular step of the manufacturing process - was also presented.

Acute oral toxicity and tissue residues of saxitoxin in the mallard (Anas platyrhynchos).

Since 2014, widespread, annual mortality events involving multiple species of seabirds have occurred in the Gulf of Alaska, Bering Sea, and Chukchi Sea. Among these die-offs, emaciation was a common finding with starvation often identified as the cause of death. However, saxitoxin (STX) was detected in many carcasses, indicating exposure of these seabirds to STX in the marine environment. Few data are available that describe the effects of STX in birds, thus presenting challenges for determining its contributions to specific mortality events. To address these knowledge gaps, we conducted an acute oral toxicity trial in mallards (Anas platyrhynchos), a common laboratory avian model, using an up-and-down method to estimate the median lethal dose (LD50) for STX. Using an enzyme-linked immunosorbent assay (ELISA), we tested select tissues from all birds and feces from those individuals that survived initial dosing. Samples with an ELISA result that exceeded approximately 10 µg 100 g-1 STX and randomly selected ELISA negative samples were further tested by high-performance liquid chromatography (HPLC). Tissues collected from mallards were also examined grossly at necropsy and then later by microscopy to identify lesions attributable to STX. The estimated LD50 was 167 µg kg-1 (95% CI = 69-275 µg kg-1). Saxitoxin was detected in fecal samples of all mallards tested for up to 48 h after dosing and at the end of the sampling period (7 d) in three birds. In those individuals that died or were euthanized <2 h after dosing, STX was readily detected throughout the gastrointestinal tract but only infrequently in heart, kidney, liver, lung, and breast muscle. No gross or microscopic lesions were observed that could be attributable to STX exposure. Given its acute toxicity, limited detectability, and frequent occurrence in the Alaska marine environment, additional research on STX in seabirds is warranted.

Separation and characterization of products from acidic methanolysis of plasmalogenic lipids by two-dimensional gas chromatography with online reduction.

The complexity of determining the composition of animal tissue lipids is greatly increased by the presence of plasmalogens in which the alkyl chain is linked to glycerol by an enol ether bond instead of being esterified. Acidic methanolysis of animal tissue lipids provides the simultaneous scission of acyl and alkenyl ether moieties, but the complexity of the products of reaction poses a great challenge in their gas chromatographic analysis. Two-dimensional gas chromatography with online reduction (GC-OR × GC) provided the resolution of all components contained in acid methanolyzed animal lipids, taking advantage of the selective hydrogenation of alkenyl ether methanolysis products prior to the second-dimension separation (2D). In this study, we also studied the chemical transformations occurring during the acidic methanolysis of animal lipids and the subsequent gas chromatographic analysis. In particular, we observed that using methanolysis reagents contaminated with water resulted in the undesired formation of fatty aldehydes, and we made recommendations on how to avoid these side reactions using proper methanolysis conditions. Products of acidic methanolysis were studied by GC-OR × GC, GC-MS, NMR spectroscopy, and GC with flame ionization detection (GC-FID). We defined the GC-FID elution order of animal lipid acidic methanolysis products using 100 m × 0.25 mm 100% bis(cyanopropyl)siloxane columns and two different set of elution conditions: isothermal elution at 180°C, and a temperature program optimized for dairy fats. A simple procedure for isolating dimethyl acetals (DMA) prior to GC analysis is also described.

On projection-reconstruction NMR.

Three most simple Projection-Reconstruction algorithms, namely, the Lowest-Value, Additive Back-Projection and Hybrid Back-Projection/Lowest-Value algorithms, are analyzed. A new, also simple, algorithm that reconstructs the spectrum by utilizing the amplitude histogram at each reconstruction point, is explored. The algorithms are tested using simulated spectra. While all the algorithms considered can potentially result in substantial reduction of the amount of data needed for reconstruction, they can suffer from a number of drawbacks. In particular, they often fail when the spectra are noisy and/or contain overlapping peaks. When compared to the existing algorithms, the new, histogram-based algorithm has the potential advantage of being able to deal with spectra containing peaks of opposite phase.

"Ersatz" and "hybrid" NMR spectral estimates using the filter diagonalization method.

The filter diagonalization method (FDM) is an efficient and elegant way to make a spectral estimate purely in terms of Lorentzian peaks. As NMR spectral peaks of liquids conform quite well to this model, the FDM spectral estimate can be accurate with far fewer time domain points than conventional discrete Fourier transform (DFT) processing. However, noise is not efficiently characterized by a finite number of Lorentzian peaks, or by any other analytical form, for that matter. As a result, noise can affect the FDM spectrum in different ways than it does the DFT spectrum, and the effect depends on the dimensionality of the spectrum. Regularization to suppress (or control) the influence of noise to give an "ersatz", or EFDM, spectrum is shown to sometimes miss weak features, prompting a more conservative implementation of filter diagonalization. The spectra obtained, called "hybrid" or HFDM spectra, are acquired by using regularized FDM to obtain an "infinite time" spectral estimate and then adding to it the difference between the DFT of the data and the finite time FDM estimate, over the same time interval. HFDM has a number of advantages compared to the EFDM spectra, where all features must be Lorentzian. They also show better resolution than DFT spectra. The HFDM spectrum is a reliable and robust way to try to extract more information from noisy, truncated data records and is less sensitive to the choice of regularization parameter. In multidimensional NMR of liquids, HFDM is a conservative way to handle the problems of noise, truncation, and spectral peaks that depart significantly from the model of a multidimensional Lorentzian peak.

Identification and quantification of the decarboxylated analogue of Pigments Red 57 and 57:1 in the color additives D&C Red No. 6, D&C Red No. 7, and their lakes, using a chelating agent and UHPLC.

Pigment Red 57 (Colour Index No. 15850, PR57) and Pigment Red 57:1 (Colour Index No. 15850:1, PR57:1) are certifiable in the USA as the color additives D&C Red No. 6 (R6) and D&C Red No. 7 (R7) for use in drugs and cosmetics. In the EU, PR57:1 is permitted in cosmetics and also as a food additive (E180) for colouring edible cheese rinds. The USFDA batch-certifies R6, R7, and their lakes in accordance with limiting specifications for impurities stated in the Code of Federal Regulations (CFR). In the current work, an impurity not specified in the CFR was studied because of its consistent presence in samples of R6 and R7 submitted for certification. Using spectroscopic methods, the impurity was tentatively identified as 4-[(4-methyl-2-sulfophenyl)azo]-3-naphthalenol (DPR57), the decarboxylated analogue of PR57 and PR57:1. Its identity was confirmed by synthesising DPR57 and determining that the UHPLC retention time, UV/visible spectrum and mass spectrum of the synthetic material were identical to those of the impurity. Using the synthesised DPR57 as a reference material, the impurity was quantified in 43 batches of R6, R7, and lakes produced by eight different manufacturers. Calibration curves ranging from 0.02% to 1.00% (w/w) were prepared by plotting the UHPLC area of DPR57 at 485 nm against its concentration. DPR57 levels ranged from < 0.02% to 0.50%. To facilitate dissolution of the color additive samples for DPR57 analysis, a relatively simple procedure was developed by adapting a previously published method that involves use of a basic solution of the chelating agent EDTA and the organic solvent N,N'-dimethylformamide. A source for DPR57 contamination of the color additives is also proposed.

Separation using high-speed counter-current chromatography and identification of 1,3-bis(4-phenylazophenyl)triazene, an impurity in the color additive D&C Red No. 17 (Sudan III).

The present work describes the application of high-speed counter-current chromatography to the preparative separation of a previously unreported impurity in the color additive D&C Red No. 17 (R17, Colour Index No. 26100, Sudan III). Due to the hydrophobic nature of the impurity, a hydrophobic two-phase solvent system (hexane-ethanol-water, 5:4:1) was used for its separation. The separated impurity was chemically characterized by spectroscopic methods as a disazo triazene, 1,3-bis(4-phenylazophenyl)triazene (PAPT). This impurity was synthesized and used as a reference material to quantify it in 15 batches of the color additive produced by various domestic and foreign manufacturers and certified by the U.S. Food and Drug Administration (FDA). Analysis of test portions by high-performance liquid chromatography showed a range of PAPT levels, from "not detected" (<0.006%) to 0.70%, across batches. The variability suggests that contamination by PAPT can be decreased or eliminated through manufacturing modifications. A chemical pathway for PAPT formation and an associated adjustment to minimize it during the process of manufacturing R17 are proposed.

Elucidation and partial NMR assignment of monosulfated maitotoxins from the Caribbean.

Compounds similar to maitotoxin (MTX) have been isolated from several laboratory strains of the dinoflagellate Gambierdiscus spp. from the Caribbean. Mass spectral results suggest that these compounds differ from MTX by the loss of one sulfate group and, in some cases, the loss of one methyl group with the addition of one degree of unsaturation. NMR experiments, using approximately 50 nmol of one of these compounds, have demonstrated that the 9-sulfo group of MTX is still present, suggesting that these compounds are 40-desulfo congeners of MTX.

Identification of 1',5'-naphthyridinophthalone and its quantification in the color additive D&C Yellow No. 10 (Quinoline Yellow) using high-performance liquid chromatography.

The present work reports the identification and characterization of a contaminant, 2-(2'-(1,5-naphthyridinyl))-1,3-indanedione (1',5'-naphthyridinophthalone, 1,5NP), in the color additive D&C Yellow No. 10 (U.S.-certifiable form of Quinoline Yellow), together with its quantification in batches of the color additive certified by the U.S. Food and Drug Administration (USFDA). The impurity, which is a compound not previously reported in the literature, was synthesised and characterised for use as a reference material. Test portions from 26 certified batches of D&C Yellow No. 10 submitted to USFDA by four domestic and four foreign manufacturers were analyzed for 1,5NP using high-performance liquid chromatography. The results revealed a wide range of 1,5NP levels across batches, with 18 (69.2%) of the test portions containing amounts from 0.32 to 169.94 µg g-1 while the remaining test portions contained no detectable (<0.07 µg g-1) amounts. Samples of the European and Japanese forms of Quinoline Yellow were also analyzed and found to contain a wide range of 1,5NP levels. The varying levels of 1,5NP in all three forms of Quinoline Yellow suggest that contamination can be significantly decreased or eliminated through manufacturing adjustments. Since 1,5NP is closely related to a D&C Yellow No. 10 contaminant (quinophthalone) that has a USFDA-specified limit of 4 µg g-1 and is a known allergen, assessment of the possible allergenicity of 1,5NP is warranted.

Determination of Sudan I and a newly synthesized Sudan III positional isomer in the color additive D&C Red No. 17 using high-performance liquid chromatography.

Specifications in the Code of Federal Regulations for the color additive D&C Red No. 17 (Colour Index 26100) limit the levels of two subsidiary colors, 1-(phenylazo)-2-naphthol (Sudan I) and 1-[[2-(phenylazo)phenyl]azo]-2-naphthalenol (Sudan III o-isomer), to 3% and 2%, respectively. The present work reports the development of a high-performance liquid chromatography (HPLC) method for the quantitative determination of these subsidiary colors. Since Sudan III o-isomer needed to be synthesized for use as a reference material, a two-step procedure was devised: (i) preparative-scale synthesis of the intermediate 2-aminoazobenzene (2AAB) and its purification by counter-current chromatography and (ii) diazotization of 2AAB and coupling with 2-naphthol. Characterization of the newly synthesized Sudan III o-isomer is also reported. Sudan I and Sudan III o-isomer were quantified by using five-point calibration curves with data points ranging from 0.108 to 3.240% and 0.077 to 2.227% by weight, respectively. The HPLC method is rapid (14 min for the total analysis cycle) and simple to implement. It was applied to the analysis of test portions from 25 batches of D&C Red No. 17 submitted to the U.S. Food and Drug Administration (USFDA) for certification, and it has recently been implemented by USFDA for routine batch certification of that color additive.

Profiling hydroxycinnamic acid glycosides, iridoid glycosides, and phenylethanoid glycosides in baobab fruit pulp (Adansonia digitata).

The baobab (Adansonia digitata L.) is a magnificent tree revered throughout Africa and is becoming recognized for its high nutritional and medicinal values. Despite numerous reports on the pharmacological potential, little is known about its chemical compositions. In this study, four hydroxycinnamic acid glycosides (1-4), six iridoid glycosides (5-10), and three phenylethanoid glycosides (11-13) were isolated from the dried baobab fruit pulp. Their structures were determined by means of spectroscopic analyses, including HRMS, 1H and 13C NMR and 2D experiments (COSY, HSQC, HMBC, and ROESY). All 13 compounds isolated were reported for the first time in the genus of Adansonia. An ultra high-performance liquid chromatography high-resolution accurate-mass mass spectrometry (UHPLC HRAM MS) method was used to conduct further investigation of the chemical compositions of the hydro-alcohol baobab fruit pulp extract. Hydroxycinnamic acid glycosides, iridoid glycosides and phenylethanoid glycosides were found to be the main components in baobab fruit pulp.

Identification of unknown compounds from polyester cans coatings that may potentially migrate into food or food simulants.

Cross-linked polyester resins are being introduced into the market as alternatives to epoxy resins as coatings for metal food cans. Identification of potential migrants, from these coatings into food, is a significant analytical challenge due to the diversity of substances employed in the manufacture of the coatings. However, such identification is required to assess migration from the can coating into the food and quantify dietary exposure. Polyester can coatings were extracted with acetonitrile at 40°C for 24h and the extracts were analyzed by a variety of analytical techniques, including GC-MS, HPLC-DAD/MS, HPLC-DAD/CAD and UHPL C-HRMS. Twenty nine non-volatile oligomers were tentatively identified using retention times, UV spectra, and accurate mass measurements. Identified oligomers suggest the coating in use for food cans is a polyester coating and is mainly based on the monomers isophthalic acid, terephthalic acid and nadic acid. To give confidence in the identification, one of the tentatively identified oligomer was synthetized and analyzed by (13)C and (1)H NMR and UHPL C-HRMS. The NMR and HRMS results, confirmed the presence of this compound in the can extracts. Finally, to determine if rapid, direct detection of the oligomers was practical, the coatings were analyzed by DART-HRMS. Twenty three out of the 29 oligomers were identified in the coating by direct measurement with DART-HRMS in few minutes.