RESUMEN
Antifouling polymer layers containing extracellular matrix-derived peptide motifs offer promising new options for biomimetic surface engineering. In this contribution, we report the design of antifouling vascular grafts bearing biofunctional peptide motifs for tissue regeneration applications based on hierarchical polymer brushes. Hierarchical diblock poly(methyl ether oligo(ethylene glycol) methacrylate-block-glycidyl methacrylate) brushes bearing azide groups (poly(MeOEGMA-block-GMA-N3)) were grown by surface-initiated atom transfer radical polymerization (SI-ATRP) and functionalized with biomimetic RGD peptide sequences. Varying the conditions of copper-catalyzed alkyne-azide "click" reaction allowed for the immobilization of RGD peptides in a wide surface concentration range. The synthesized hierarchical polymer brushes bearing peptide motifs were characterized in detail using various surface sensitive physicochemical methods. The hierarchical brushes presenting the RGD sequences provided excellent cell adhesion properties and at the same time remained resistant to fouling from blood plasma. The synthesis of anti-fouling hierarchical brushes bearing 1.2 × 103 nmol/cm2 RGD biomimetic sequences has been adapted for the surface modification of commercially available grafts of woven polyethylene terephthalate (PET) fibers. The fiber mesh was endowed with polymerization initiator groups via aminolysis and acylation reactions optimized for the material. The obtained bioactive antifouling vascular grafts promoted the specific adhesion and growth of endothelial cells, thus providing a potential avenue for endothelialization of artificial conduits.
Asunto(s)
Materiales Biomiméticos , Prótesis Vascular , Materiales Biocompatibles Revestidos , Regeneración Tisular Dirigida/instrumentación , Oligopéptidos/química , Tereftalatos Polietilenos/química , Polimerizacion , Adsorción , Secuencias de Aminoácidos , Azidas/química , Proteínas Sanguíneas , Adhesión Celular , División Celular , Química Clic , Endotelio Vascular/fisiología , Vidrio , Oro , Células Endoteliales de la Vena Umbilical Humana , Humanos , Proteínas Inmovilizadas , Ensayo de Materiales , Plasma , Silicio , Propiedades de Superficie , Trombosis/prevención & controlRESUMEN
Poly(2-alkyl-2-oxazoline)s (PAOx) represent a class of emerging polymers that can substitute or even outperform poly(ethylene oxide) (PEO) standard in various applications. Despite the great advances in PAOx research, there is still a gap in the direct experimental comparison of antifouling properties between PAOx and the golden standard PEO when exposed to blood. Motivated by this, we developed a straightforward protocol for the one-pot PAOx polymerization and surface coating by a "grafting to-" approach. First, we synthesized a library of hydrophilic poly(2-methyl-2-oxazoline)s (PMeOx) and poly(2-ethyl-2-oxazoline)s (PEtOx) with molar mass ranging from 1.5 to 10 kg/mol (DP = 16-115). The PAOx living chains were directly terminated by amine and hydroxyl groups of polydopamine (PDA) anchor layer providing the highest so far reported grafting densities ranging from 0.2 to 2.1 chains/nm2. In parallel, PEO chains providing the same degree of polymerization (molar mass from 1.2 to 5 kg/mol, DP = 28-116) bearing thiol groups were grafted to PDA. The thickness, surface-related parameters, covalent structure, and antifouling properties of the resulting polymer brushes were determined via various surface sensitive techniques. The comparison of the synthesized PAOx and PEO brushes led us to the conclusion that at the same surface-related parameters, PMeOx brushes show significantly better antifouling character when challenged against human blood plasma.
Asunto(s)
Oxazoles/química , Poliaminas/química , Polímeros/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas/efectos de los fármacos , Peso Molecular , Oxazoles/síntesis química , Oxazoles/farmacología , Plasma/efectos de los fármacos , Poliaminas/síntesis química , Poliaminas/farmacología , Polietilenglicoles/síntesis química , Polietilenglicoles/química , Polietilenglicoles/farmacología , Polimerizacion , Polímeros/síntesis química , Polímeros/farmacología , Propiedades de Superficie/efectos de los fármacosRESUMEN
A biosensor for the detection of hepatitis B antibodies in clinical saliva was developed. Compared to conventional analysis of blood serum, it offers the advantage of noninvasive collection of samples. Detection of biomarkers in saliva imposes two major challenges associated with the low analyte concentration and increased surface fouling. The detection of minute amounts of hepatitis B antibodies was performed by plasmonically amplified fluorescence sandwich immunoassay. To have access to specific detection, we prevented the nonspecific adsorption of biomolecules present in saliva by brushes of poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] grafted from the gold sensor surface and post modified with hepatitis B surface antigen. Obtained results were validated against the response measured with ELISA at a certified laboratory using serum from the same patients.
Asunto(s)
Técnicas Biosensibles/métodos , Anticuerpos contra la Hepatitis B/análisis , Antígenos de Superficie de la Hepatitis B/química , Saliva/metabolismo , Biomarcadores/análisis , Oro/química , Anticuerpos contra la Hepatitis B/sangre , Anticuerpos contra la Hepatitis B/inmunología , Antígenos de Superficie de la Hepatitis B/inmunología , Humanos , Proteínas Inmovilizadas/química , Proteínas Inmovilizadas/inmunología , Inmunoensayo , Polímeros/química , Espectrometría de Fluorescencia , Resonancia por Plasmón de SuperficieRESUMEN
Fouling from complex biological fluids such as blood plasma to biorecognition element (BRE)-functionalized coatings hampers the use of affinity biosensor technologies in medical diagnostics. Here, we report the effects the molecular mechanisms involved in functionalization of low-fouling carboxy-functional coatings have on the BRE capacity and resistance to fouling from blood plasma. The specific mechanisms of EDC/NHS activation of carboxy groups, BRE attachment, and deactivation of residual activated groups on recently developed ultra-low-fouling carboxybetaine polymer and copolymer brushes (pCB) as well as conventional carboxy-terminated oligo(ethylene glycol)-based alkanethiolate self-assembled monolayers (OEG-SAMs) are studied using the polarization modulation infrared reflection/absorption spectroscopy, X-ray photoelectron spectroscopy, and surface plasmon resonance methods. It is shown that the fouling resistance of BRE-functionalized pCB coatings is strongly influenced by a deactivation method affecting the ultra-low-fouling molecular structure of the brush and surface charges. It is revealed that, in contrast to free carboxy-group-terminated OEG-SAMs, only a partial deactivation of EDC/NHS-activated zwitterionic carboxy groups by spontaneous hydrolysis is possible in the pCB brushes. The fouling resistance of activated/BRE-functionalized pCB is shown to be recovered only by covalent attachment of amino acid deactivation agents to residual activated carboxy groups of pCB. The developed deactivation procedure is further combined with ultra-low-fouling brushes of random copolymer carboxybetaine methacrylamide (CBMAA) and N-(2-hydroxypropyl) methacrylamide (HPMAA) with optimized CBMAA content (15%) providing a BRE-functionalized coating with superior fouling resistance over various carboxy-functional low-fouling coatings including homopolymer pCB brushes and OEG-SAMs. The biorecognition capabilities of pHPMAA-CBMAA(15%) are demonstrated via the sensitive label-free detection of a microRNA cancer biomarker (miR-16) in blood plasma.
Asunto(s)
Materiales Biocompatibles Revestidos/metabolismo , Polímeros/metabolismo , Materiales Biocompatibles Revestidos/química , Humanos , Estructura Molecular , Espectroscopía de Fotoelectrones , Polímeros/síntesis química , Polímeros/químicaRESUMEN
Implantable sensor devices require coatings that efficiently interface with the tissue environment to mediate biochemical analysis. In this regard, bioinspired polymer hydrogels offer an attractive and abundant source of coating materials. However, upon implantation these materials generally elicit inflammation and the foreign body reaction as a consequence of protein fouling on their surface and concomitant poor hemocompatibility. In this report we investigate a strategy to endow chitosan hydrogel coatings with antifouling properties by the grafting of polymer brushes in a "grafting-from" approach. Chitosan coatings were functionalized with polymer brushes of oligo(ethylene glycol) methyl ether methacrylate and 2-hydroxyethyl methacrylate using photoinduced single electron transfer living radical polymerization and the surfaces were thoroughly characterized by XPS, AFM, water contact angle goniometry, and in situ ellipsometry. The antifouling properties of these new bioinspired hydrogel-brush coatings were investigated by surface plasmon resonance. The influence of the modifications to the chitosan on hemocompatibility was assessed by contacting the surfaces with platelets and leukocytes. The coatings were hydrophilic and reached a thickness of up to 180 nm within 30 min of polymerization. The functionalization of the surface with polymer brushes significantly reduced the protein fouling and eliminated platelet activation and leukocyte adhesion. This methodology offers a facile route to functionalizing implantable sensor systems with antifouling coatings that improve hemocompatibility and pave the way for enhanced device integration in tissue.
Asunto(s)
Quitosano/química , Materiales Biocompatibles Revestidos/química , Hidrogeles/química , Metacrilatos/química , Polietilenglicoles/química , Técnicas Biosensibles/métodos , Plaquetas/efectos de los fármacos , Adhesión Celular/efectos de los fármacos , Materiales Biocompatibles Revestidos/farmacología , Radicales Libres , Humanos , Hidrogeles/farmacología , Bombas de Infusión Implantables , Leucocitos/citología , Leucocitos/efectos de los fármacos , Activación Plaquetaria/efectos de los fármacos , Polimerizacion , Cultivo Primario de CélulasRESUMEN
Functional polymer coatings that combine the ability to resist nonspecific fouling from complex media with high biorecognition element (BRE) immobilization capacity represent an emerging class of new functional materials for a number of bioanalytical and biosensor technologies for medical diagnostics, security, and food safety. Here, we report on a random copolymer brush surface - poly(CBMAA-ran-HPMAA) - providing high BRE immobilization capacity while simultaneously exhibiting ultralow-fouling behavior in complex food media. We demonstrate that both the functionalization and fouling resistance capabilities of such copolymer brushes can be tuned by changing the surface contents of the two monomer units: nonionic N-(2-hydroxypropyl) methacrylamide (HPMAA) and carboxy-functional zwitterionic carboxybetaine methacrylamide (CBMAA). It is demonstrated that the resistance to fouling decreases with the surface content of CBMAA; poly(CBMAA-ran-HPMAA) brushes with CBMAA molar content up to 15 mol % maintain excellent resistance to fouling from a variety of homogenized foods (hamburger, cucumber, milk, and lettuce) even after covalent attachment of BREs to carboxy groups of CBMAA. The poly(CBMAA 15 mol %-ran-HPMAA) brushes functionalized with antibodies are demonstrated to exhibit fouling resistance from food samples by up to 3 orders of magnitude better when compared with the widely used low-fouling carboxy-functional oligo(ethylene glycol) (OEG)-based alkanethiolate self-assembled monolayers (AT SAMs) and, furthermore, by up to 2 orders of magnitude better when compared with the most successful ultralow-fouling biorecognition coatings - poly(carboxybetaine acrylamide), poly(CBAA). When model SPR detections of food-borne bacterial pathogens in homogenized foods are used, it is also demonstrated that the antibody-functionalized poly(CBMAA 15 mol %-ran-HPMAA) brush exhibits superior biorecognition properties over the poly(CBAA).
Asunto(s)
Acrilamidas/química , Resinas Acrílicas/química , Incrustaciones Biológicas/prevención & control , Inocuidad de los Alimentos/métodos , Resinas Acrílicas/síntesis química , Anticuerpos/química , Escherichia coli/inmunología , Alimentos , Oro/química , Nanopartículas/química , Salmonella typhimurium/inmunología , HumectabilidadRESUMEN
The study monitored in vitro early response of connective tissue cells and immunocompetent cells to enosseal implant materials coated by different blood components (serum, activated plasma, and plasma/platelets) to evaluate human osteoblast proliferation and synthetic activity and inflammatory response presented as a cytokine profile of peripheral blood mononuclear cells (PBMCs) under conditions imitating the situation upon implantation. The cells were cultivated on coated Ti-plasma-sprayed (Ti-PS), Ti-etched (Ti-Etch), Ti-hydroxyapatite (Ti-HA), and ZrO2 surfaces. The plasma/platelets coating supported osteoblast proliferation only on osteoconductive Ti-HA and Ti-Etch whereas activated plasma enhanced proliferation on all surfaces. Differentiation (BAP) and IL-8 production remained unchanged or decreased irrespective of the coating and surface; only the serum and plasma/platelets-coated ZrO2 exhibited higher BAP and IL-8 expression. RANKL production increased on serum and activated plasma coatings. PBMCs produced especially cytokines playing role in inflammatory phase of wound healing, that is, IL-6, GRO-α, GRO, ENA-78, IL-8, GM-CSF, EGF, and MCP-1. Cytokine profiles were comparable for all tested surfaces; only ENA-78, IL-8, GM-CSF, and MCP-1 expression depended on materials and coatings. The activated plasma coating led to uniformed surfaces and represented a favorable treatment especially for bioinert Ti-PS and ZrO2 whereas all coatings had no distinctive effect on bioactive Ti-HA and Ti-Etch.
Asunto(s)
Materiales Biocompatibles Revestidos/efectos adversos , Materiales Biocompatibles Revestidos/química , Citocinas/metabolismo , Leucocitos Mononucleares/metabolismo , Osteoblastos/metabolismo , Línea Celular , Proliferación Celular/efectos de los fármacos , Quimiocina CCL2/metabolismo , Quimiocina CXCL1/metabolismo , Quimiocina CXCL5/metabolismo , Factor de Crecimiento Epidérmico/metabolismo , Factor Estimulante de Colonias de Granulocitos y Macrófagos/metabolismo , Humanos , Inflamación/metabolismo , Interleucina-6/metabolismo , Interleucina-8/metabolismo , Leucocitos Mononucleares/efectos de los fármacos , Osteoblastos/efectos de los fármacos , Titanio/efectos adversos , Titanio/química , Cicatrización de Heridas/efectos de los fármacosRESUMEN
Prevention of fouling from proteins in blood plasma attracts significant efforts, and great progress is made in identifying surface coatings that display antifouling properties. In particular, poly(ethylene glycol) (PEG) is widely used and dense PEG-like cylindrical brushes of poly[oligo(ethylene glycol) methacrylate] (poly(OEGMA)) can drastically reduce blood plasma fouling. Herein, a comprehensive study of the variation of blood plasma fouling on this surface, including the analysis of the composition of protein deposits on poly(OEGMA) coatings after contact with blood plasma from many different donors, is reported. Correlation between the plasma fouling behavior and protein deposit composition points to the activation of the complement system as the main culprit of dramatically increased and accelerated deposition of blood plasma proteins on this type of antifouling coating, specifically through the classical pathway. These findings are consistent with observations on PEGylated drug carriers and highlight the importance of understanding the potential interactions between antifouling coatings and their environment.
Asunto(s)
Polietilenglicoles , Polietilenglicoles/química , Humanos , Incrustaciones Biológicas/prevención & control , Proteínas Sanguíneas/química , Proteínas Sanguíneas/análisis , Propiedades de Superficie , Metacrilatos/química , Materiales Biocompatibles Revestidos/químicaRESUMEN
The analysis of low-abundance protein molecules in human serum is reported based on counting of the individual affinity-captured analyte on a solid sensor surface, yielding a readout format similar to digital assays. In this approach, a sandwich immunoassay with rolling circle amplification (RCA) is used for single molecule detection (SMD) through associating the target analyte with spatially distinct bright spots observed by fluorescence microscopy. The unspecific interaction of the target analyte and other immunoassay constituents with the sensor surface is of particular interest in this work, as it ultimately limits the performance of this assay. It is minimized by the design of the respective biointerface and thiol self-assembled monolayer with oligoethylene (OEG) head groups, and a poly[oligo(ethylene glycol) methacrylate] (pHOEGMA) antifouling polymer brush was used for the immobilization of the capture antibody (cAb) on the sensor surface. The assay relying on fluorescent postlabeling of long single-stranded DNA that are grafted from the detection antibody (dAb) by RCA was established with the help of combined surface plasmon resonance and surface plasmon-enhanced fluorescence monitoring of reaction kinetics. These techniques were employed for in situ measurements of conjugating of cAb to the sensor surface, tagging of short single-stranded DNA to dAb, affinity capture of the target analyte from the analyzed liquid sample, and the fluorescence readout of the RCA product. Through mitigation of adsorption of nontarget molecules on the sensor surface by tailoring of the antifouling biointerface, optimizing conjugation chemistry, and by implementing weak Coulombic repelling between dAb and the sensor surface, the limit of detection (LOD) of the assay was substantially improved. For the chosen interleukin-6 biomarker, SMD assay with LOD at a concentration of 4.3 fM was achieved for model (spiked) samples, and validation of the ability of detection of standard human serum samples is demonstrated.
Asunto(s)
ADN de Cadena Simple , Resonancia por Plasmón de Superficie , Humanos , Resonancia por Plasmón de Superficie/métodosRESUMEN
Fibrinogen adsorption on a surface results in the modification of its functional characteristics. Our previous studies revealed that fibrinogen adsorbs onto surfaces essentially in 2 different orientations depending on its concentration in the solution: "side-on" at low concentrations and "end-on" at high concentrations. In the present study, we analyzed the thrombin-mediated release of fibrinopeptides A and B (FpA and FpB) from fibrinogen adsorbed in these orientations, as well as from surface-bound fibrinogen-fibrin complexes prepared by converting fibrinogen adsorbed in either orientation into fibrin and subsequently adding fibrinogen. The release of fibrinopeptides from surface-adsorbed fibrinogen and from surface-bound fibrinogen-fibrin complexes differed significantly compared with that from fibrinogen in solution. The release of FpB occurred without the delay (lag phase) characteristic of its release from fibrinogen in solution. The amount of FpB released from end-on adsorbed fibrinogen and from adsorbed fibrinogen-fibrin complexes was much higher than that of FpA. FpB is known as a potent chemoattractant, so its preferential release suggests a physiological purpose in the attraction of cells to the site of injury. The N-terminal portions of fibrin ß chains including residues Bß15-42, which are exposed after cleavage of FpB, have been implicated in many processes, including angiogenesis and inflammation.
Asunto(s)
Fibrina/metabolismo , Fibrinopéptido A/metabolismo , Fibrinopéptido B/metabolismo , Trombina/metabolismo , Fibrinógeno/metabolismo , Humanos , Cinética , Unión Proteica , Espectroscopía Infrarroja por Transformada de Fourier , Resonancia por Plasmón de SuperficieRESUMEN
The resistance of poly(ethylene glycol) (PEG) against protein adsorption is crucial and has been widely utilized in various biomedical applications. In this work, the complete protein composition of biofilms deposited on PEG-based surfaces from human blood plasma (BP) was identified for the first time using nanoLC-MS/MS, a powerful tool in protein analysis. The mass of deposited BP and the number of different proteins contained in the deposits on individual surfaces decreased in the order of self-assembling monolayers of oligo(ethylene glycol) alkanethiolates (SAM) > poly(ethylene glycol) end-grafted onto a SAM > poly(oligo(ethylene glycol) methacrylate) brushes prepared by surface initiated polymerization (poly(OEGMA)). The BP deposit on the poly(OEGMA) surface was composed only of apolipoprotein A-I, apolipoprotein B-100, complement C3, complement C4-A, complement C4-B, histidine-rich glycoprotein, Ig mu chain C region, fibrinogen (Fbg), and serum albumin (HSA). The total resistance of the surface to the Fbg and HSA adsorption from single protein solutions suggested that their deposition from BP was mediated by some of the other proteins. Current theories of protein resistance are not sufficient to explain the observed plasma fouling. The research focused on the identified proteins, and the experimental approach used in this work can provide the basis for the understanding and rational design of plasma-resistant surfaces.
Asunto(s)
Plasma/química , Polietilenglicoles/química , Proteínas/química , Adsorción , Cromatografía Liquida , Humanos , Propiedades de Superficie , Espectrometría de Masas en TándemRESUMEN
Fibrinogen is one of the plasma proteins most susceptible to oxidative modification. It has been suggested that modification of fibrinogen may cause thrombotic/bleeding complications associated with many pathophysiological states of organism. We exposed fibrinogen molecules to three different modification reagents-malondialdehyde, sodium hypochlorite, and peroxynitrite-that are presented to various degrees in different stages of oxidative stress. We studied the changes in fibrin network formation and platelet interactions with modified fibrinogens under flow conditions. The fastest modification of fibrinogen was caused by hypochlorite. Fibers from fibrinogen modified with either reagent were thinner in comparison with control fibers. We found that platelet dynamic adhesion was significantly lower on fibrinogen modified with malondialdehyde and significantly higher on fibrinogen modified either with hypochlorite or peroxynitrite reflecting different prothrombotic/antithrombotic properties of oxidatively modified fibrinogens. It seems that, in the complex reactions ongoing in living organisms at conditions of oxidation stress, hypochlorite modifies proteins (e.g., fibrinogen) faster and more preferentially than malondialdehyde. It suggests that the prothrombotic effects of prior fibrinogen modifications may outweigh the antithrombotic effect of malondialdehyde-modified fibrinogen in real living systems.
Asunto(s)
Plaquetas/metabolismo , Fibrinógeno/química , Fibrinógeno/metabolismo , Malondialdehído/farmacología , Estrés Oxidativo/fisiología , Ácido Peroxinitroso/química , Hipoclorito de Sodio/farmacología , Plaquetas/efectos de los fármacos , Células Cultivadas , Fibrinógeno/farmacología , Humanos , Indicadores y Reactivos/química , Indicadores y Reactivos/farmacología , Malondialdehído/química , Estrés Oxidativo/efectos de los fármacos , Adhesividad Plaquetaria/efectos de los fármacos , Adhesividad Plaquetaria/fisiología , Relación Estructura-ActividadRESUMEN
Introduction: The formation of diabetic ulcers (DU) is a common complication for diabetic patients resulting in serious chronic wounds. There is therefore, an urgent need for complex treatment of this problem. This study examines a bioactive wound dressing of a biodegradable electrospun nanofibrous blend of poly(L-lactide-co-ε-caprolactone) and poly(ε-caprolactone) (PLCL/PCL) covered by a thin fibrin layer for sustained delivery of bioactive molecules. Methods: Electrospun PLCL/PCL nanofibers were coated with fibrin-based coating prepared by a controlled technique and enriched with human platelet lysate (hPL), fibroblast growth factor 2 (FGF), and vascular endothelial growth factor (VEGF). The coating was characterized by scanning electron microscopy and fluorescent microscopy. Protein content and its release rate and the effect on human saphenous vein endothelial cells (HSVEC) were evaluated. Results: The highest protein amount is achieved by the coating of PLCL/PCL with a fibrin mesh containing 20% v/v hPL (NF20). The fibrin coating serves as an excellent scaffold to accumulate bioactive molecules from hPL such as PDGF-BB, fibronectin (Fn), and α-2 antiplasmin. The NF20 coating shows both fast and a sustained release of the attached bioactive molecules (Fn, VEGF, FGF). The dressing significantly increases the viability of human saphenous vein endothelial cells (HSVECs) cultivated on a collagen-based wound model. The exogenous addition of FGF and VEGF during the coating procedure further increases the HSVECs viability. In addition, the presence of α-2 antiplasmin significantly stabilizes the fibrin mesh and prevents its cleavage by plasmin. Discussion: The NF20 coating supplemented with FGF and VEGF provides a promising wound dressing for the complex treatment of DU. The incorporation of various bioactive molecules from hPL and growth factors has great potential to support the healing processes by providing appropriate stimuli in the chronic wound.
Asunto(s)
Nanofibras , Factor A de Crecimiento Endotelial Vascular , Humanos , alfa 2-Antiplasmina , Poliésteres/farmacología , Células Endoteliales , Cicatrización de Heridas , VendajesRESUMEN
The modification of biomaterial surfaces has become increasingly relevant in the context of ongoing advancements in tissue engineering applications and the development of tissue-mimicking polymer materials. In this study, we investigated the layer-by-layer (LbL) deposition of polyelectrolyte multilayer protein reservoirs consisting of poly-l-lysine (PLL) and hyaluronic acid (HA) on the hydrophobic surface of poly(glycerol sebacate) (PGS) elastomer. Using the methods of isothermal titration calorimetry and surface plasmon resonance, we systematically investigated the interactions between the polyelectrolytes and evaluated the deposition process in real time, providing insight into the phenomena associated with film assembly. PLL/HA LbL films deposited on PGS showed an exceptional ability to incorporate bone morphogenetic protein-2 (BMP-2) compared to other growth factors tested, thus highlighting the potential of PLL/HA LbL films for osteoregenerative applications. The concentration of HA solution used for film assembly did not affect the thickness and topography of the (PLL/HA)10 films, but had a notable impact on the hydrophilicity of the PGS surface and the BMP-2 release kinetics. The release kinetics were successfully described using the Weibull model and hyperbolic tangent function, underscoring the potential of these less frequently used models to compare the protein release from LbL protein reservoirs.
Asunto(s)
Ácido Hialurónico , Polilisina , Ácido Hialurónico/química , Polilisina/química , Nanopartículas Capa por Capa , Polímeros , PolielectrolitosRESUMEN
BACKGROUND: Extracellular vesicles are released into body fluids from the majority of, if not all, cell types. Because their secretion and specific cargo (e.g., proteins) varies according to pathology, extracellular vesicles may prove a rich source of biomarkers. However, their biological and pathophysiological functions are poorly understood in hematological malignancies. OBJECTIVE: Here, we investigated proteome changes in the exosome-rich fraction of the plasma of myelodysplastic syndrome patients and healthy donors. METHODS: Exosome-rich fraction of the plasma was isolated using ExoQuick™: proteomes were compared and statistically processed; proteins were identified by nanoLC-MS/MS and verified using the ExoCarta and QuickGO databases. Mann-Whitney and Spearman analyses were used to statistically analyze the data. 2D western blot was used to monitor clusterin proteoforms. RESULTS: Statistical analyses of the data highlighted clusterin alterations as the most significant. 2D western blot showed that the clusterin changes were caused by posttranslational modifications. Moreover, there was a notable increase in the clusterin proteoform in the exosome-rich fraction of plasma of patients with more severe myelodysplastic syndrome; this corresponded with a simultaneous decrease in their plasma. CONCLUSIONS: This specific clusterin proteoform seems to be a promising biomarker for myelodysplastic syndrome progression.
Asunto(s)
Biomarcadores/sangre , Vesículas Extracelulares/metabolismo , Síndromes Mielodisplásicos/patología , Proteoma/metabolismo , Proteómica/métodos , Anciano , Estudios de Casos y Controles , Cromatografía Liquida , Femenino , Humanos , Masculino , Síndromes Mielodisplásicos/metabolismo , Proteoma/análisis , Espectrometría de Masas en TándemRESUMEN
Whenever an artificial surface comes into contact with blood, proteins are rapidly adsorbed onto its surface. This phenomenon, termed fouling, is then followed by a series of undesired reactions involving activation of complement or the coagulation cascade and adhesion of leukocytes and platelets leading to thrombus formation. Thus, considerable efforts are directed towards the preparation of fouling-resistant surfaces with the best possible hemocompatibility. Herein, a comprehensive hemocompatibility study after heparinized blood contact with seven polymer brushes prepared by surface-initiated atom transfer radical polymerization is reported. The resistance to fouling is quantified and thrombus formation and deposition of blood cellular components on the coatings are analyzed. Moreover, identification of the remaining adsorbed proteins is performed via mass spectroscopy to elucidate their influence on the surface hemocompatibility. Compared with an unmodified glass surface, the grafting of polymer brushes minimizes the adhesion of platelets and leukocytes and prevents the thrombus formation. The fouling from undiluted blood plasma is reduced by up to 99%. Most of the identified proteins are connected with the initial events of foreign body reaction towards biomaterial (coagulation cascade proteins, complement component, and inflammatory proteins). In addition, several proteins that are not previously linked with blood-biomaterial interaction are presented and discussed.
Asunto(s)
Incrustaciones Biológicas , Trombosis , Humanos , Adsorción , Polímeros/química , Incrustaciones Biológicas/prevención & control , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/química , Proteínas , Propiedades de SuperficieRESUMEN
Non-specific protein adsorption (fouling) triggers a number of deleterious events in the application of biomaterials. Antifouling polymer brushes successfully suppress fouling, however for some coatings an extremely high variability of fouling for different donors remains unexplained. The authors report that in the case of poly(2-hydroxyethyl methacrylate) (poly(HEMA)) this variability is due to the complement system activation that causes massive acceleration in the fouling kinetics of blood plasma. Using plasma from various donors, the fouling kinetics on poly(HEMA) is analyzed and correlated with proteins identified in the deposits on the surface and with the biochemical compositions of the plasma. The presence of complement components in fouling deposits and concentrations of C3a in different plasmas indicate that the alternative complement pathway plays a significant role in the fouling on poly(HEMA) through the "tick-over" mechanism of spontaneous C3 activation. The generated C3b binds to the poly(HEMA) surface and amplifies complement activation locally. Heat-inactivated plasma prevents accelerated fouling kinetics, confirming the central role of complement activation. The results highlight the need to take into account the variability between individuals when assessing interactions between biomaterials and blood plasma, as well as the importance of the mechanistic insight that can be gained from protein identification.
Asunto(s)
Incrustaciones Biológicas , Materiales Biocompatibles/farmacología , Incrustaciones Biológicas/prevención & control , Activación de Complemento , Humanos , Metacrilatos , Plasma , Propiedades de SuperficieRESUMEN
PURPOSE: Due to thromboembolic complications and in-stent-stenosis after flow diverter (FD) treatment, the long-term use of dual antiplatelet treatment (DAPT) is mandatory. The tested nano-coating has been shown to reduce material thrombogenicity and promote endothelial cell proliferation in vitro. We compared the biocompatibility of coated (Derivo Heal) and non-coated (Derivo bare) FDs with DAPT in an animal model. METHODS: Derivo® bare (n = 10) and Derivo® Heal (n = 10) FD were implanted in the common carotid arteries (CCAs) of New Zealand white rabbits. One additional FD, alternately a Derivo bare (n = 5) or Derivo Heal (n = 5), was implanted in the abdominal aorta (AA) for assessment of the patency of branch arteries. Histopathological examinations were performed after 28 days. Angiography was performed before and after FD implantation and at follow-up. RESULTS: Statistical analysis of the included specimens showed complete endothelialization of all FDs with no significant differences in neointima thickness between Derivo® bare and Derivo® Heal (CCA: p = 0.91; AA: p = 0.59). A significantly reduced number of macrophages in the vessel wall of the Derivo Heal was observed for the CCA (p = 0.02), and significantly reduced fibrin and platelet deposition on the surface of the Derivo Heal was observed for the AA. All branch arteries of the stented aorta remained patent. CONCLUSION: In this animal model, the novel fibrin-based coated FD showed a similar blood and tissue compatibility as the non-coated FD.
Asunto(s)
Fibrina , Stents , Animales , Plaquetas , Arteria Carótida Común , Materiales Biocompatibles Revestidos , Neointima , ConejosRESUMEN
We describe the internal structure, spatial organization and dynamic formation of coronary artery thrombi from ST-segment elevation myocardial infarction patients. Scanning electron microscopy (SEM) revealed significant differences among four groups of patients (<2 hours; 2-6 hours; 6-12 hours, and >12 hours) related to the time of ischemia. Coronary artery thrombi from patients presenting less than 2 hours after the infarction were almost entirely composed of platelets, with small amounts of fibrin and red blood cells. In contrast, thrombi from late presenters (>12 hours) consisted of mainly platelets at the distal end, where clotting was initiated, with almost no platelets at the proximal end, while the red blood cell content went from low at the initiating end to more than 90% at the proximal end. Furthermore, fibrin was present mainly on the outside of the thrombi and older thrombi contained thicker fibers. The red blood cells in late thrombi were compressed to a close-packed, tessellated array of polyhedral structures, called polyhedrocytes. Moreover, there was redistribution from the originally homogeneous composition to fibrin and platelets to the outside, with polyhedrocytes on the interior. The presence of polyhedrocytes and the redistribution of components are signs of in vivo clot contraction (or retraction). These results suggest why later thrombi are resistant to fibrinolytic agents and other treatment modalities, since the close-packed polyhedrocytes form a nearly impermeable seal. Furthermore, it is of particular clinical significance that these findings suggest specific disparate therapies that will be most effective at different stages of thrombus development.
Asunto(s)
Plaquetas/patología , Trombosis Coronaria , Eritrocitos/patología , Fibrina/análisis , Fibrinolíticos , Infarto del Miocardio con Elevación del ST , Coagulación Sanguínea/efectos de los fármacos , Coagulación Sanguínea/fisiología , Trombosis Coronaria/diagnóstico por imagen , Trombosis Coronaria/tratamiento farmacológico , Trombosis Coronaria/metabolismo , Trombosis Coronaria/patología , Resistencia a Medicamentos/fisiología , Femenino , Fibrinolíticos/administración & dosificación , Fibrinolíticos/efectos adversos , Humanos , Masculino , Microscopía Electrónica de Rastreo/métodos , Persona de Mediana Edad , Infarto del Miocardio con Elevación del ST/etiología , Infarto del Miocardio con Elevación del ST/terapia , Trombectomía/métodos , Factores de Tiempo , Tiempo de TratamientoRESUMEN
Ultra-low-fouling poly[N-(2-hydroxypropyl) methacrylamide] (poly(HPMA)) brushes have been synthesized for the first time. Similar to the so far only ultra-low-fouling surface, poly(carboxybetaine acrylamide), the level of blood plasma fouling was below the detection limit of surface plasmon resonance (SPR, 0.03 ng·cm(-2)) despite being a hydrogen bond donor and displaying a moderate wettability, thus challenging the currently accepted views for the design of antifouling properties. The antifouling properties were preserved even after two years of storage. To demonstrate the potential of poly(HPMA) brushes for the preparation of bioactive ultra-low fouling surfaces a label-free SPR immunosensor for detection of G Streptococcus was prepared.