RESUMEN
BACKGROUND: One of the greatest benefits of contemporary restorative dentistry is the creation of fixed partial dentures. The retention and durability of the fixed partial dentures may be improved by using a variety of tooth preparation methods, surface treatments, and luting resins. AIM: To measure the shear binding strength of resin cement to saliva-contaminated lithium disilicate (LDS) ceramic after being exposed to various cleaning treatments. METHODOLOGY: Over 30 LDS samples were examined. In Group 1, a cleansing solution comprising 15% zirconium oxide (Ivoclean) was employed for a duration of 20 s. This was succeeded by a rinsing phase lasting 15 s utilizing deionized water, followed by a 15-s period for drying. Subsequently, a final stage of air drying was conducted over a span of 15 s. In contrast, Group 2 underwent a washing procedure of 20 s involving a cleansing solution containing 30% sodium silicate. This was then ensued by a rinsing interval of 15 s with deionized water, succeeded by an air-drying process spanning 15 s. After applying cleaning solutions to the surface and adhering the specimens to the composite blocks using resin cement Multilink Automix (Ivoclar Vivadent, Schaan, Liechtenstein), the shear bond strength was assessed. RESULTS: Using a 30% sodium silicate solution (Group 2), we were able to get the highest mean shear bond strength value after saliva-contaminated LDS. Group 1, 15% zirconium oxide (Ivoclean) had the weakest decontamination agents as measured by mean shear bond strengths. The shear bond strength values of the two groups were found to vary significantly between individuals using the independent sample t-test. LDs ceramic cleaned with a 30% sodium silicate solution had a higher shear bond strength than ceramic cleaned with Ivoclean (p<0.05). CONCLUSION: The application of a 30% sodium silicate solution rendered the highest shear bond strength for saliva-contaminated LDS ceramic. In comparison, ceramic cleaned with Ivoclean exhibited notably lower shear bond strength values. The outcome of this investigation highlights the potential of diverse cleaning agents in influencing the adhesive qualities of resin cement, thereby contributing to the enhancement of fixed partial denture durability and efficacy.