RESUMEN
Fiber drawing enables scalable fabrication of multifunctional flexible fibers that integrate electrical, optical and microfluidic modalities to record and modulate neural activity. Constraints on thermomechanical properties of materials, however, have prevented integrated drawing of metal electrodes with low-loss polymer waveguides for concurrent electrical recording and optical neuromodulation. Here we introduce two fabrication approaches: (1) an iterative thermal drawing with a soft, low melting temperature (Tm) metal indium, and (2) a metal convergence drawing with traditionally non-drawable high Tm metal tungsten. Both approaches deliver multifunctional flexible neural interfaces with low-impedance metallic electrodes and low-loss waveguides, capable of recording optically-evoked and spontaneous neural activity in mice over several weeks. We couple these fibers with a light-weight mechanical microdrive (1g) that enables depth-specific interrogation of neural circuits in mice following chronic implantation. Finally, we demonstrate the compatibility of these fibers with magnetic resonance imaging (MRI) and apply them to visualize the delivery of chemical payloads through the integrated channels in real time. Together, these advances expand the domains of application of the fiber-based neural probes in neuroscience and neuroengineering.
RESUMEN
Magnetic nanoparticles have garnered sustained research interest for their promise in biomedical applications including diagnostic imaging, triggered drug release, cancer hyperthermia, and neural stimulation. Many of these applications make use of heat dissipation by ferrite nanoparticles under alternating magnetic fields, with these fields acting as an externally administered stimulus that is either present or absent, toggling heat dissipation on and off. Here, we motivate and demonstrate an extension of this concept, magnetothermal multiplexing, in which exposure to alternating magnetic fields of differing amplitude and frequency can result in selective and independent heating of magnetic nanoparticle ensembles. The differing magnetic coercivity of these particles, empirically characterized by a custom high amplitude alternating current magnetometer, informs the systematic selection of a multiplexed material system. This work culminates in a demonstration of magnetothermal multiplexing for selective remote control of cellular signaling in vitro.
RESUMEN
Antibiotic resistance is a major global health concern that requires action across all sectors of society. In particular, to allow conservative and effective use of antibiotics clinical settings require better diagnostic tools that provide rapid determination of antimicrobial susceptibility. We present a method for rapid and scalable antimicrobial susceptibility testing using stationary nanoliter droplet arrays that is capable of delivering results in approximately half the time of conventional methods, allowing its results to be used the same working day. In addition, we present an algorithm for automated data analysis and a multiplexing system promoting practicality and translatability for clinical settings. We test the efficacy of our approach on numerous clinical isolates and demonstrate a 2-d reduction in diagnostic time when testing bacteria isolated directly from urine samples.
Asunto(s)
Antibacterianos/química , Pruebas de Sensibilidad Microbiana/instrumentación , Pruebas de Sensibilidad Microbiana/métodos , Infecciones Urinarias/diagnóstico , Algoritmos , Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Bacterias/aislamiento & purificación , Interpretación Estadística de Datos , Diseño de Equipo , Liofilización , Humanos , Fenotipo , Factores de Tiempo , Infecciones Urinarias/microbiología , Orina/microbiologíaRESUMEN
Understanding the forces controlling vascular network properties and morphology can enhance in vitro tissue vascularization and graft integration prospects. This work assessed the effect of uniaxial cell-induced and externally applied tensile forces on the morphology of vascular networks formed within fibroblast and endothelial cell-embedded 3D polymeric constructs. Force intensity correlated with network quality, as verified by inhibition of force and of angiogenesis-related regulators. Tensile forces during vessel formation resulted in parallel vessel orientation under static stretching and diagonal orientation under cyclic stretching, supported by angiogenic factors secreted in response to each stretch protocol. Implantation of scaffolds bearing network orientations matching those of host abdominal muscle tissue improved graft integration and the mechanical properties of the implantation site, a critical factor in repair of defects in this area. This study demonstrates the regulatory role of forces in angiogenesis and their capacities in vessel structure manipulation, which can be exploited to improve scaffolds for tissue repair.
Asunto(s)
Vasos Sanguíneos/fisiología , Morfogénesis , Células Endoteliales de la Vena Umbilical Humana , Humanos , Neovascularización Fisiológica , Resistencia a la Tracción , Andamios del TejidoRESUMEN
A multitude of cell screening assays for diagnostic and research applications rely on quantitative measurements of a sample in the presence of different reagent concentrations. Standard methods rely on microtiter plates of varying well density, which provide simple and standardized sample addressability. However, testing hundreds of chemical dilutions requires complex automation, and typical well volumes of microtiter plates are incompatible with the analysis of a small number of cells. Here, we present a microfluidic device for creating a high-resolution chemical gradient spanning 200 nanoliter wells. Using air-based shearing, we show that the individual wells can be compartmentalized without altering the concentration gradient, resulting in a large set of isolated nanoliter cell culture wells. We provide an analytical and numerical model for predicting the concentration within each culture chamber and validate it against experimental results. We apply our system for the investigation of yeast cell metabolic gene regulation in the presence of different ratios of galactose/glucose concentrations and successfully resolve the nutrient threshold at which the cells activate the galactose pathway.
Asunto(s)
Técnicas de Cultivo de Célula , Galactosa/química , Glucosa/química , Técnicas Analíticas Microfluídicas , Nanotecnología , Técnicas de Cultivo de Célula/instrumentación , Galactosa/metabolismo , Glucosa/metabolismo , Técnicas Analíticas Microfluídicas/instrumentación , Saccharomyces cerevisiae/citología , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismoRESUMEN
Large soft tissue defects involve significant tissue loss, requiring surgical reconstruction. Autologous flaps are occasionally scant, demand prolonged transfer surgery, and induce donor site morbidity. The present work set out to fabricate an engineered muscle flap bearing its own functional vascular pedicle for repair of a large soft tissue defect in mice. Full-thickness abdominal wall defect was reconstructed using this engineered vascular muscle flap. A 3D engineered tissue constructed of a porous, biodegradable polymer scaffold embedded with endothelial cells, fibroblasts, and/or myoblasts was cultured in vitro and then implanted around the femoral artery and veins before being transferred, as an axial flap, with its vascular pedicle to reconstruct a full-thickness abdominal wall defect in the same mouse. Within 1 wk of implantation, scaffolds showed extensive functional vascular density and perfusion and anastomosis with host vessels. At 1 wk posttransfer, the engineered muscle flaps were highly vascularized, were well-integrated within the surrounding tissue, and featured sufficient mechanical strength to support the abdominal viscera. Thus, the described engineered muscle flap, equipped with an autologous vascular pedicle, constitutes an effective tool for reconstruction of large defects, thereby circumventing the need for both harvesting autologous flaps and postoperative scarification.
Asunto(s)
Pared Abdominal/patología , Pared Abdominal/cirugía , Músculos/cirugía , Procedimientos de Cirugía Plástica , Colgajos Quirúrgicos/cirugía , Ingeniería de Tejidos/métodos , Animales , Fenómenos Biomecánicos , Dextranos/metabolismo , Eritrocitos/metabolismo , Arteria Femoral/crecimiento & desarrollo , Fibroblastos/citología , Fibroblastos/trasplante , Fluoresceína-5-Isotiocianato/análogos & derivados , Fluoresceína-5-Isotiocianato/metabolismo , Células Endoteliales de la Vena Umbilical Humana , Humanos , Implantes Experimentales , Ratones , Mioblastos/citología , Mioblastos/trasplante , Neovascularización Fisiológica , Perfusión , Colgajos Quirúrgicos/irrigación sanguínea , UltrasonidoRESUMEN
Abdominal wall reconstruction following extensive tissue loss is essential and can be achieved using autologous flaps. However, their use is limited due to their inadequate availability and due to post-operative donor site scarification. This work presents a step-by-step technique for fabrication of a vascularized muscle flap, to be applied in full-thickness abdominal wall defect reconstruction. Poly L-lactic acid/poly lactic-co-glycolic acid scaffolds, prepared using a salt leaching technique, were used as the supporting matrix in vitro for simultaneously seeded endothelial cells, fibroblasts and myoblasts. The cell-embedded graft was then implanted around femoral artery and vein vessels, which provided a central blood supply. Vascularization and perfusion were achieved by capillary sprouting from the main host vessel into the graft. A thick and vascularized tissue was formed within one week, and was then transferred as an autologous flap together with its main vessels, to a full-thickness abdominal wall defect. The flap remained viable after transfer and featured sufficient mechanical strength to support the abdominal viscera. Thus, this engineered muscle flap can be used as an alternative source for autologous flaps to reconstruct full-thickness abdominal wall defects.
Asunto(s)
Pared Abdominal/cirugía , Colgajos Quirúrgicos/irrigación sanguínea , Animales , Técnicas de Cultivo de Célula , Línea Celular , Células Endoteliales de la Vena Umbilical Humana , Humanos , Ácido Láctico/química , Masculino , Ratones , Ratones Desnudos , Poliésteres , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Polímeros/química , Colgajos Quirúrgicos/fisiología , Resistencia a la Tracción , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
Progress in understanding brain-viscera interoceptive signaling is hindered by a dearth of implantable devices suitable for probing both brain and peripheral organ neurophysiology during behavior. Here we describe multifunctional neural interfaces that combine the scalability and mechanical versatility of thermally drawn polymer-based fibers with the sophistication of microelectronic chips for organs as diverse as the brain and the gut. Our approach uses meters-long continuous fibers that can integrate light sources, electrodes, thermal sensors and microfluidic channels in a miniature footprint. Paired with custom-fabricated control modules, the fibers wirelessly deliver light for optogenetics and transfer data for physiological recording. We validate this technology by modulating the mesolimbic reward pathway in the mouse brain. We then apply the fibers in the anatomically challenging intestinal lumen and demonstrate wireless control of sensory epithelial cells that guide feeding behaviors. Finally, we show that optogenetic stimulation of vagal afferents from the intestinal lumen is sufficient to evoke a reward phenotype in untethered mice.
RESUMEN
Exposure to stressful or traumatic stimuli may alter hypothalamic-pituitary-adrenal (HPA) axis and sympathoadrenal-medullary (SAM) reactivity. This altered reactivity may be a component or cause of mental illnesses. Dissecting these mechanisms requires tools to reliably probe HPA and SAM function, particularly the adrenal component, with temporal precision. We previously demonstrated magnetic nanoparticle (MNP) technology to remotely trigger adrenal hormone release by activating thermally sensitive ion channels. Here, we applied adrenal magnetothermal stimulation to probe stress-induced HPA axis and SAM changes. MNP and control nanoparticles were injected into the adrenal glands of outbred rats subjected to a tone-shock conditioning/extinction/recall paradigm. We measured MNP-triggered adrenal release before and after conditioning through physiologic (heart rate) and serum (epinephrine, corticosterone) markers. Aversive conditioning altered adrenal function, reducing corticosterone and blunting heart rate increases post-conditioning. MNP-based organ stimulation provides a novel approach to probing the function of SAM, HPA, and other neuro-endocrine axes and could help elucidate changes across stress and disease models.
RESUMEN
Thermal drawing has been recently leveraged to yield multifunctional, fiber-based neural probes at near kilometer length scales. Despite its promise, the widespread adoption of this approach has been impeded by (1) material compatibility requirements and (2) labor-intensive interfacing of functional features to external hardware. Furthermore, in multifunctional fibers, significant volume is occupied by passive polymer cladding that so far has only served structural or electrical insulation purposes. In this article, we report a rapid, robust, and modular approach to creating multifunctional fiber-based neural interfaces using a solvent evaporation or entrapment-driven (SEED) integration process. This process brings together electrical, optical, and microfluidic modalities all encased within a copolymer comprised of water-soluble poly(ethylene glycol) tethered to water-insoluble poly(urethane) (PU-PEG). We employ these devices for simultaneous optogenetics and electrophysiology and demonstrate that multifunctional neural probes can be used to deliver cellular cargo with high viability. Upon exposure to water, PU-PEG cladding spontaneously forms a hydrogel, which in addition to enabling integration of modalities, can harbor small molecules and nanomaterials that can be released into local tissue following implantation. We also synthesized a custom nanodroplet forming block polymer and demonstrated that embedding such materials within the hydrogel cladding of our probes enables delivery of hydrophobic small molecules in vitro and in vivo. Our approach widens the chemical toolbox and expands the capabilities of multifunctional neural interfaces.
RESUMEN
Deep brain stimulation (DBS) has long been used to alleviate symptoms in patients suffering from psychiatric and neurological disorders through stereotactically implanted electrodes that deliver current to subcortical structures via wired pacemakers. The application of DBS to modulate neural circuits is, however, hampered by its mechanical invasiveness and the use of chronically implanted leads, which poses a risk for hardware failure, hemorrhage, and infection. Here, we demonstrate that a wireless magnetothermal approach to DBS (mDBS) can provide similar therapeutic benefits in two mouse models of Parkinson's disease, the bilateral 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) and in the unilateral 6-hydroxydopamine (6-OHDA) model. We show magnetothermal neuromodulation in untethered moving mice through the activation of the heat-sensitive capsaicin receptor (transient receptor potential cation channel subfamily V member 1, TRPV1) by synthetic magnetic nanoparticles. When exposed to an alternating magnetic field, the nanoparticles dissipate heat, which triggers reversible firing of TRPV1-expressing neurons. We found that mDBS in the subthalamic nucleus (STN) enables remote modulation of motor behavior in healthy mice. Moreover, mDBS of the STN reversed the motor deficits in a mild and severe parkinsonian model. Consequently, this approach is able to activate deep-brain circuits without the need for permanently implanted hardware and connectors.
Asunto(s)
Estimulación Encefálica Profunda/métodos , Nanopartículas de Magnetita/uso terapéutico , Trastornos Parkinsonianos/terapia , 1-Metil-4-fenil-1,2,3,6-Tetrahidropiridina/efectos adversos , Animales , Conducta Animal/fisiología , Modelos Animales de Enfermedad , Calor , Masculino , Ratones , Ratones Endogámicos C57BL , Neuronas/patología , Oxidopamina/efectos adversos , Trastornos Parkinsonianos/inducido químicamente , Núcleo Subtalámico/fisiología , Canales Catiónicos TRPV/metabolismoRESUMEN
The development of new tools to interface with the nervous system, empowered by advances in electronics and materials science, has transformed neuroscience and is informing therapies for neurological and mental conditions. Although the vast majority of neural engineering research has focused on advancing tools to study the brain, understanding the peripheral nervous system and other organs can similarly benefit from these technologies. To realize this vision, the neural interface technologies need to address the biophysical, mechanical, and chemical challenges posed by the peripheral nerves and organs. In this Perspective, we discuss design considerations and recent technological advances to modulate electrical signaling outside the central nervous system. The innovations in bioelectronics borne out of interdisciplinary collaborations between biologists and physical scientists may not only advance fundamental study of peripheral (neuro)physiology but also empower clinical interventions for conditions including neurological, gastrointestinal, and immune dysfunction.
Asunto(s)
Neurociencias/instrumentación , Neurociencias/métodos , Nervios Periféricos/fisiología , Sistema Nervioso Periférico/fisiología , Animales , Estimulación Eléctrica , Electrodos Implantados , Humanos , Sistemas Hombre-Máquina , Nanotecnología , Neurociencias/tendencias , Optogenética , TelemetríaRESUMEN
The field of bioelectronic medicines seeks to modulate electrical signaling within peripheral organs, providing temporally precise control of physiological functions. This is usually accomplished with implantable devices, which are often unsuitable for interfacing with soft and highly vascularized organs. Here, we demonstrate an alternative strategy for modulating peripheral organ function, which relies on the endogenous expression of a heat-sensitive cation channel, transient receptor potential vanilloid family member 1 (TRPV1), and heat dissipation by magnetic nanoparticles (MNPs) in remotely applied alternating magnetic fields. We use this approach to wirelessly control adrenal hormone secretion in genetically intact rats. TRPV1-dependent calcium influx into the cells of adrenal cortex and medulla is sufficient to drive rapid release of corticosterone and (nor)epinephrine. As altered levels of these hormones have been correlated with mental conditions such as posttraumatic stress disorder and major depression, our approach may facilitate the investigation of physiological and psychological impacts of stress.
Asunto(s)
Corticoesteroides/genética , Glándulas Suprarrenales/metabolismo , Regulación de la Expresión Génica/efectos de la radiación , Corticoesteroides/metabolismo , Glándulas Suprarrenales/citología , Animales , Calcio/metabolismo , Células Cultivadas , Calor , Campos Magnéticos , Ratas , Canales Catiónicos TRPV/genética , Canales Catiónicos TRPV/metabolismo , Transfección , TransgenesRESUMEN
Magnetic nanomaterials in magnetic fields can serve as versatile transducers for remote interrogation of cell functions. In this study, we leveraged the transition from vortex to in-plane magnetization in iron oxide nanodiscs to modulate the activity of mechanosensory cells. When a vortex configuration of spins is present in magnetic nanomaterials, it enables rapid control over their magnetization direction and magnitude. The vortex configuration manifests in near zero net magnetic moment in the absence of a magnetic field, affording greater colloidal stability of magnetic nanomaterials in suspensions. Together, these properties invite the application of magnetic vortex particles as transducers of externally applied minimally invasive magnetic stimuli in biological systems. Using magnetic modeling and electron holography, we predict and experimentally demonstrate magnetic vortex states in an array of colloidally synthesized magnetite nanodiscs 98-226 nm in diameter. The magnetic nanodiscs applied as transducers of torque for remote control of mechanosensory neurons demonstrated the ability to trigger Ca2+ influx in weak (≤28 mT), slowly varying (≤5 Hz) magnetic fields. The extent of cellular response was determined by the magnetic nanodisc volume and magnetic field conditions. Magnetomechanical activation of a mechanosensitive cation channel TRPV4 (transient receptor potential vanilloid family member 4) exogenously expressed in the nonmechanosensitive HEK293 cells corroborated that the stimulation is mediated by mechanosensitive ion channels. With their large magnetic torques and colloidal stability, magnetic vortex particles may facilitate basic studies of mechanoreception and its applications to control electroactive cells with remote magnetic stimuli.
Asunto(s)
Campos Magnéticos , Neuronas , Células HEK293 , HumanosRESUMEN
Understanding the function of nitric oxide, a lipophilic messenger in physiological processes across nervous, cardiovascular and immune systems, is currently impeded by the dearth of tools to deliver this gaseous molecule in situ to specific cells. To address this need, we have developed iron sulfide nanoclusters that catalyse nitric oxide generation from benign sodium nitrite in the presence of modest electric fields. Locally generated nitric oxide activates the nitric oxide-sensitive cation channel, transient receptor potential vanilloid family member 1 (TRPV1), and the latency of TRPV1-mediated Ca2+ responses can be controlled by varying the applied voltage. Integrating these electrocatalytic nanoclusters with multimaterial fibres allows nitric oxide-mediated neuronal interrogation in vivo. The in situ generation of nitric oxide in the ventral tegmental area with the electrocatalytic fibres evoked neuronal excitation in the targeted brain region and its excitatory projections. This nitric oxide generation platform may advance mechanistic studies of the role of nitric oxide in the nervous system and other organs.
Asunto(s)
Técnicas Electroquímicas/métodos , Fenómenos Electrofisiológicos/fisiología , Neuronas , Óxido Nítrico , Animales , Encéfalo/citología , Encéfalo/fisiología , Calcio/metabolismo , Células HEK293 , Humanos , Masculino , Nanopartículas del Metal/química , Ratones , Ratones Endogámicos C57BL , Neuronas/metabolismo , Neuronas/fisiología , Óxido Nítrico/análisis , Óxido Nítrico/metabolismo , Canales Catiónicos TRPV/metabolismoRESUMEN
Human adipose-derived microvascular endothelial cells (HAMEC) and mesenchymal stem cells (MSC) have been shown to bear angiogenic and vasculogenic capabilities. We hypothesize that co-culturing HAMEC:MSC on a porous biodegradable scaffold in vitro, later implanted as a graft around femoral blood vessels in a rat, will result in its vascularization by host vessels, creating a functional vascular flap that can effectively treat a range of large full-thickness soft tissue defects. HAMEC were co-cultured with MSC on polymeric three-dimensional porous constructs. Grafts were then implanted around the femoral vessels of a rat. To ensure vessel sprouting from the main femoral vessels, grafts were pre-isolated from the surrounding tissue. Graft vascularization was monitored to confirm full vascularization before flap transfer. Flaps were then transferred to treat both abdominal wall and exposed bone and tendon of an ankle defects. Flaps were analysed to determine vascular properties in terms of maturity, functionality and survival of implanted cells. Findings show that pre-isolated grafts bearing the HAMEC:MSC combination promoted formation of highly vascularized flaps, which were better integrated in both defect models. The results of this study show the essentiality of a specific adipose-derived cell combination in successful graft vascularization and integration, two processes crucial for flap survival. Copyright © 2017 John Wiley & Sons, Ltd.
Asunto(s)
Tejido Adiposo/citología , Células Madre Mesenquimatosas/citología , Microvasos/citología , Neovascularización Fisiológica , Ingeniería de Tejidos/métodos , Pared Abdominal/irrigación sanguínea , Animales , Prótesis Vascular , Células Endoteliales/citología , Femenino , Humanos , Implantes Experimentales , Ratas Wistar , Colgajos Quirúrgicos/irrigación sanguínea , Andamios del TejidoRESUMEN
Generation of vessel networks within engineered tissues is critical for integration and perfusion of the implanted tissue in vivo. The effect of mechanical cues in guiding and stabilizing the vessels has begun to attract marked interest. This review surveys the impact of mechanical cues on formation of vascular networks in 2D and 3D gel matrices. We give less emphasis to regulation of endothelial monolayers and single endothelial cells. Several vascularization models have consistently found that the stress generated in the gel, and encountered by embedded cells, control various aspects of vascular network formation, including sprouting, branching, alignment, and vessel maturation. This internal stress is generated by cell contractile forces, and is balanced by gel stiffness and boundary constrains imposed on the gel. Actin and myosin II are key molecular players in controlling initiation of vessel sprouting and branching morphogenesis. Additionally, the impact of external mechanical cues on tissue vascularization, and studies supporting the notion that mechanical forces regulate vascularization in the live animal are reviewed.
Asunto(s)
Bioprótesis , Prótesis Vascular , Ingeniería de Tejidos/métodos , Animales , Materiales Biocompatibles/química , Fenómenos Biomecánicos , Células Endoteliales/citología , Endotelio Vascular/citología , Fibrina/química , HumanosRESUMEN
One of the main factors limiting the thickness of a tissue construct and its consequential viability and applicability in vivo, is the control of oxygen supply to the cell microenvironment, as passive diffusion is limited to a very thin layer. Although various materials have been described to restore the integrity of full-thickness defects of the abdominal wall, no material has yet proved to be optimal, due to low graft vascularization, tissue rejection, infection, or inadequate mechanical properties. This protocol describes a means of engineering a fully vascularized flap, with a thickness relevant for muscle tissue reconstruction. Cell-embedded poly L-lactic acid/poly lactic-co-glycolic acid constructs are implanted around the mouse femoral artery and vein and maintained in vivo for a period of one or two weeks. The vascularized graft is then transferred as a flap towards a full thickness defect made in the abdomen. This technique replaces the need for autologous tissue sacrifications and may enable the use of in vitro engineered vascularized flaps in many surgical applications.
Asunto(s)
Prótesis Vascular , Colgajos Quirúrgicos/irrigación sanguínea , Ingeniería de Tejidos/métodos , Animales , Humanos , Ácido Láctico , Ratones , Ratones Desnudos , Poliésteres , Ácido Poliglicólico , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , PolímerosRESUMEN
Mechanical forces play an important role in the initial stages of embryo development; yet, the influence of forces, particularly of tensile forces, on embryonic stem cell differentiation is still unknown. The effects of tensile forces on mouse embryonic stem cell (mESC) differentiation within a three-dimensional (3D) environment were examined using an advanced bioreactor system. Uniaxial static or dynamic stretch was applied on cell-embedded collagen constructs. Six-day-long cyclic stretching of the seeded constructs led to a fourfold increase in Brachyury (BRACH-T) expression, associated with the primitive streak phase in gastrulation, confirmed also by immunofluorescence staining. Further examination of gene expression characteristic of mESC differentiation and pluripotency, under the same conditions, revealed changes mostly related to mesodermal processes. Additionally, downregulation of genes related to pluripotency and stemness was observed. Cyclic stretching of the 3D constructs resulted in actin fiber alignment parallel to the stretching direction. BRACH-T expression decreased under cyclic stretching with addition of myosin II inhibitor. No significant changes in gene expression were observed when mESCs were first differentiated in the form of embryoid bodies and then exposed to cyclic stretching, suggesting that forces primarily influence nondifferentiated cells. Understanding the effects of forces on stem cell differentiation provides a means of controlling their differentiation for later use in regenerative medicine applications and sheds light on their involvement in embryogenesis.