Natural biopolymers: novel templates for the synthesis of nanostructures.

Biological systems such as proteins, viruses, and DNA have been most often reported to be used as templates for the synthesis of functional nanomaterials, but the properties of widely available biopolymers, such as cellulose, have been much less exploited for this purpose. Here, we report for the first time that cellulose nanocrystals (CNC) have the capacity to assist in the synthesis of metallic nanoparticle chains. A cationic surfactant, cetyltrimethylammonium bromide (CTAB), was critical to nanoparticle stabilization and CNC surface modification. Silver, gold, copper, and platinum nanoparticles were synthesized on CNCs, and the nanoparticle density and particle size were controlled by varying the concentration of CTAB, the pH of the salt solution, and the reduction time.

Control of particle cluster dispersion using responsive polymeric additives.

The dispersion behavior of clusters of hydrophilic and hydrophobic silica treated with a thermoresponsive polymer has been investigated. The influence of the thermoresponsive interfacial chemistry was assessed by performing dispersion studies in poly(dimethylsiloxane) (PDMS) at 25 and 68 degrees C for agglomerates of powders incorporating poly(N-isopropyl acrylamide) (PNIPAM), a thermoresponsive polymer, and water. While the dispersion of clusters of hydrophilic silica was found to be temperature independent, dispersion of hydrophobic silica exhibited a temperature dependency. The response of the polymer upon temperature variation brings about modifications in the interparticle interactions of the PNIPAM-treated powders thus leading to changes in the cluster cohesivity. The dependence of the cluster cohesivity on temperature was evidenced through changes in the dispersion mechanism and kinetics of the treated silica clusters at both tested temperatures. In addition, optical microscopy of silica suspensions with and without PNIPAM at 25 and 60 degrees C, illustrated the effect of the polymer presence and configuration on the particle-particle interaction forces. While micrographs of the particles at 25 degrees C show less evidence of particle aggregation, the micrographs at 60 degrees C illustrate an increase in aggregation suggesting an enhancement in the attractive forces between particles.

Enzyme models: design and selection.

There are two approaches to the discovery of enzyme mimics, that is identifying molecules that are able to bind substrate(s) and then catalyse reactions. The first approach, often inspired by enzymes themselves, utilises chemical knowledge and experience to design the catalyst. The other approach is to create a library and select the best host of a transition state analogue of the required reaction.

Dynamic hemicarcerands and hemicarceplexes.

The reversible nature of the imine bond formation in CDCl(3) solution has been exploited to exchange substituted for unsubstituted m-phenylenediamine (MPD) units in hemicarcerand octaimines. Moreover, acid-catalyzed imine exchange has been shown to provide a novel mechanism whereby ferrocene (Fc) can be released as an entrapped guest from the hemicarceplex C(2)B(4)&crcldt;Fc dissolved in CDCl(3) to give the hemicarcerand C(2)B(4) when excess of both MPD and trifluoroacetic acid are present.

Toward interlocked molecules beyond catenanes and rotaxanes.

A linear bis secondary dialkylammonium ion-containing scaffold-based upon an anthracenyl core-has been synthesized. It has been demonstrated that it is possible to dock either one or two dibenzo[24]crown-8 (DB24C8) macrocycles onto this scaffold to afford either a [2]- or [3]pseudorotaxane, respectively. In solution, the association constants for the formation of each of these species has been quantified by employing (1)H NMR spectroscopy, and both species survive in the "gas phase" as evidenced by FAB mass spectrometry. Additionally, the X-ray crystal superstructure of the [3]pseudorotaxane has been determined.

A rotaxane-like complex with controlled-release characteristics.

A rotaxane-like complex, based on a dumbbell-shaped component containing an NH(2)(+) recognition site for a [25]crown-8 ring component and a slippage stopper in the form of a p-(tert-butyl)phenyl group, has been synthesized by a "threading-followed-by-stoppering" approach. The half-life for dissociation of this complex, which is very sensitive to its environment, can be varied from minutes to months by changing the temperature and the polarity of the solvent.

Ammonium ion binding with pyridine-containing crown ethers.

Dipyrido[24]crown-8 (DP24C8) has been synthesized and shown to form [2]pseudorotaxanes spontaneously with dibenzylammonium ions. These complexes, which have been demonstrated by (1)H NMR spectroscopy to form faster in solution than when the macrocyclic polyether is dibenzo[24]crown-8 (DB24C8), are also stronger than their DB24C8 counterparts. One of the [2]pseudorotaxanes has been used to construct a [2]rotaxane (see above) comprising a dumbbell-shaped component based on a dibenzylammonium ion which is encircled by a DP24C8 macrocycle and terminated by (triphenylphosphonium)methyl stoppers.

Filariasis testing in a jird model: new drug leads from some old standbys.

A total of 65 compounds, most of which were from chemical classes having members known to be active against one or more parasitic organisms, were evaluated against Brugia pahangi and Acanthocheilonema viteae for macrofilaricidal activity in male Mongolian jirds (Meriones unguiculatus). Sixteen of the 65 compounds tested suppressed the number of parasites. Of these 16, three were suppressive for B. pahangi, 10 for A. viteae, and three for both parasites. The antibiotic nigericin and the antihistaminic isothipendyl were found to be most active.

In vivo deployment of mechanically adaptive nanocomposites for intracortical microelectrodes.

We recently introduced a series of stimuli-responsive, mechanically adaptive polymer nanocomposites. Here, we report the first application of these bio-inspired materials as substrates for intracortical microelectrodes. Our hypothesis is that the ideal electrode should be initially stiff to facilitate minimal trauma during insertion into the cortex, yet become mechanically compliant to match the stiffness of the brain tissue and minimize forces exerted on the tissue, attenuating inflammation. Microprobes created from mechanically reinforced nanocomposites demonstrated a significant advantage compared to model microprobes composed of neat polymer only. The nanocomposite microprobes exhibit a higher storage modulus (E' = ~5 GPa) than the neat polymer microprobes (E' = ~2 GPa) and can sustain higher loads (~12 mN), facilitating penetration through the pia mater and insertion into the cerebral cortex of a rat. In contrast, the neat polymer microprobes mechanically failed under lower loads (~7 mN) before they were capable of insertion into cortical tissue. Further, we demonstrated the material's ability to morph while in the rat cortex to more closely match the mechanical properties of the cortical tissue. Nanocomposite microprobes that were implanted into the rat cortex for up to eight weeks demonstrated increased cell density at the microelectrode-tissue interface and a lack of tissue necrosis or excessive gliosis. This body of work introduces our nanocomposite-based microprobes as adaptive substrates for intracortical microelectrodes and potentially for other biomedical applications.

Mechanically adaptive intracortical implants improve the proximity of neuronal cell bodies.

The hypothesis is that the mechanical mismatch between brain tissue and microelectrodes influences the inflammatory response. Our unique, mechanically adaptive polymer nanocomposite enabled this study within the cerebral cortex of rats. The initial tensile storage modulus of 5 GPa decreases to 12 MPa within 15 min under physiological conditions. The response to the nanocomposite was compared to surface-matched, stiffer implants of traditional wires (411 GPa) coated with the identical polymer substrate and implanted on the contralateral side. Both implants were tethered. Fluorescent immunohistochemistry labeling examined neurons, intermediate filaments, macrophages, microglia and proteoglycans. We demonstrate, for the first time, a system that decouples the mechanical and surface chemistry components of the neural response. The neuronal nuclei density within 100 µm of the device at four weeks post-implantation was greater for the compliant nanocomposite compared to the stiff wire. At eight weeks post-implantation, the neuronal nuclei density around the nanocomposite was maintained, but the density around the wire recovered to match that of the nanocomposite. The glial scar response to the compliant nanocomposite was less vigorous than it was to the stiffer wire. The results suggest that mechanically associated factors such as proteoglycans and intermediate filaments are important modulators of the response of the compliant nanocomposite.