Long-lived electrets and lack of ferroelectricity in methylammonium lead bromide CH3NH3PbBr3 ferroelastic single crystals.

Hybrid lead halides CH3NH3PbX3 (X = I, Br, and Cl) have emerged as a new class of semiconductors for low-cost optoelectronic devices with superior performance. Since their perovskite crystal structure may have lattice instabilities against polar distortions, they are also being considered as potential photo-ferroelectrics. However, so far, research on their ferroelectricity has yielded inconclusive results and the subject is far from being settled. Here, we investigate, using a combined experimental and theoretical approach, the possible presence of electric polarization in tetragonal and orthorhombic CH3NH3PbBr3 (T-MAPB and O-MAPB). We found that T-MAPB does not sustain spontaneous polarization but, under an external electric field, it is projected into a metastable, ionic space-charge electret state. The electret can be frozen on cooling, producing a large and long-lasting polarization in O-MAPB. Molecular dynamics simulations show that the ferroelastic domain boundaries are able to trap charges and segregate ionic point defects, thus playing a favorable role in the stabilization of the electret. At lower temperatures, the lack of ferroelectric behavior is explained using first principles calculations as the result of the tight competition among many metastable states with randomly oriented polarization; this large configurational entropy does not allow a single polar state to dominate at any significant temperature range.

Excited State Properties of Hybrid Perovskites.

Metal halide perovskites have come to the attention of the scientific community for the progress achieved in solar light conversion. Energy sustainability is one of the priorities of our society, and materials advancements resulting in low-cost but efficient solar cells and large-area lighting devices represent a major goal for applied research. From a basic point of view, perovskites are an exotic class of hybrid materials combining some merits of organic and inorganic semiconductors: large optical absorption, large mobilities, and tunable band gap together with the possibility to be processed in solution. When a novel class of promising semiconductors comes into the limelight, lively discussions ensue on the photophysics of band-edge excitations, because just the states close to the band edge are entailed in energy/charge transport and light emission. This was the case several decades ago for III-V semiconductors, it has been up to 10 years ago for organics, and it is currently the case for perovskites. Our aim in this Account is to rationalize the body of experimental evidence on perovskite photophysics in a coherent theoretical framework, borrowing from the knowledge acquired over the years in materials optoelectronics. A crucial question is whether photon absorption leads to a population of unbound, conductive free charges or instead excitons, neutral and insulating bound states created by Coulomb interaction just below the energy of the band gap. We first focus on the experimental estimates of the exciton binding energy (Eb): at room temperature, Eb is comparable to the thermal energy kBT in MAPbI3 and increases up to values 2-3kBT in wide band gap MAPbBr3 and MAPbCl3. Statistical considerations predict that these values, even though comparable to or larger than thermal energy, let free carriers prevail over bound excitons for all levels of excitation densities relevant for devices. The analysis of photophysics evidence confirms that all hybrid halide perovskites behave as free-charge semiconductors. Thanks to such property, in combination with band gap energies covering the entire solar spectrum, perovskites represent a promising materials platform for highly efficient, single and multijunction solar cells. Concerning the use of perovskites as color-tunable materials in light emitting devices, free-charges are not the preferred species, as they recombine radiatively through a bimolecular process that is inefficient at the charge-injection levels typical of LED operation. Strategies to overcome this limit, and thus extend the use of perovskite materials beyond solar energy conversion, could be borrowed from inorganic semiconductor optoelectronics and include the fabrication of nanostructures with reduced dimensionality to alter the electronic density of states, as well as engineering composite materials.

Ln3Q9 as a molecular framework for ion-size-driven assembly of heterolanthanide (Nd, Er, Yb) multiple near-infrared emitters.

A unique example of discrete molecular entity Nd(y)Er(x)Yb(3-(x+y))Q9 (1) (Q = quinolinolato) containing three different lanthanides simultaneously emitting in three different spectral regions in the NIR, ranging from 900 to 1600 nm, has been synthesized and fully chararacterized. A simple molecular strategy based on tuning metal composition in the Ln3Q9 framework, which contains inequivalent central and terminal coordination sites, has allowed a satisfactory ion-size-driven control of molecular speciation close to 90%. In 1 the central position of the larger Nd ion is well distinguished from the terminal ones of the smaller Yb(3+) and Er(3+), which are almost "vicariants" as found in the heterobimetallic Er(x)Yb(3-x)Q9 (2). The Ln3Q9 molecular architecture, which allows communication between the ions, has proved to afford multiple NIR emission in 1 and 2, and is promising to develop a variety of multifunctional materials through the variation of the Ln composition.

Strong Anharmonicity at the Origin of Anomalous Thermal Conductivity in Double Perovskite Cs2 NaYbCl6.

Anomalous thermal transport of Cs2 NaYbCl6 double-halide perovskite above room temperature is reported and rationalized. Calculations of phonon dispersion relations and scattering rates up to the fourth order in lattice anharmonicity have been conducted to determine their effective dependence on temperature. These findings show that specific phonon group velocities and lifetimes increase if the temperature is raised above 500 K. This, in combination with anharmonicity, provides the microscopic mechanism responsible for the increase in lattice thermal conductivity at high temperatures, contrary to the predictions of phonon transport theories based on solely cubic anharmonicity. The model accurately and quantitatively reproduces the experimental thermal conductivity data as a function of temperature.

Interface properties of organic para-hexaphenyl/α-sexithiophene heterostructures deposited on highly oriented pyrolytic graphite.

It was recently reported, that heterostructures of para-hexaphenyl (p-6P) and α-sexithiophene (6T) deposited on muscovite mica exhibit the intriguing possibility to prepare lasing nanofibers of tunable emission wavelength. For p-6P/6T heterostructures, two different types of 6T emission have been observed, namely, the well-known red emission of bulk 6T crystals and additionally a green emission connected to the interface between p-6P and 6T. In this study, the origin of the green fluorescence is investigated by photoelectron spectroscopy (PES). As a prerequisite, it is necessary to prepare structurally similar organic crystals on a conductive surface, which leads to the choice of highly oriented pyrolytic graphite (HOPG) as a substrate. The similarity between p-6P/6T heterostructures on muscovite mica and on HOPG is evidenced by X-ray diffraction (XRD), scanning force microscopy (SFM), and optical spectroscopy. PES measurements show that the interface between p-6P and 6T crystals is sharp on a molecular level without any sign of interface dipole formation or chemical interaction between the molecules. We therefore conclude that the different emission colors of the two 6T phases are caused by different types of molecular aggregation.

Exciton dissociation in 2D layered metal-halide perovskites.

Layered 2D perovskites are making inroads as materials for photovoltaics and light emitting diodes, but their photophysics is still lively debated. Although their large exciton binding energies should hinder charge separation, significant evidence has been uncovered for an abundance of free carriers among optical excitations. Several explanations have been proposed, like exciton dissociation at grain boundaries or polaron formation, without clarifying yet if excitons form and then dissociate, or if the formation is prevented by competing relaxation processes. Here we address exciton stability in layered Ruddlesden-Popper PEA2PbI4 (PEA stands for phenethylammonium) both in form of thin film and single crystal, by resonant injection of cold excitons, whose dissociation is then probed with femtosecond differential transmission. We show the intrinsic nature of exciton dissociation in 2D layered perovskites, demonstrating that both 2D and 3D perovskites are free carrier semiconductors and their photophysics is described by a unique and universal framework.

Stabilization of Inorganic Perovskite Solar Cells with a 2D Dion-Jacobson Passivating Layer.

Inorganic metal halide perovskites such as CsPbI3 are promising for high-performance, reproducible, and robust solar cells. However, inorganic perovskites are sensitive to humidity, which causes the transformation from the black phase to the yellow δ, non-perovskite phase. Such phase instability has been a significant challenge to long-term operational stability. Here, a surface dimensionality reduction strategy is reported, using 2-(4-aminophenyl)ethylamine cation to construct a Dion-Jacobson 2D phase that covers the surface of the 3D inorganic perovskite structure. The Dion-Jacobson layer mainly grows at the grain boundaries of the perovskite, effectively passivating surface defects and providing favourable interfacial charge transfer. The resulting inorganic perovskite films exhibit excellent humidity resistance when submerged in an aqueous solution (isopropanol:water = 4:1 v/v) and exposed to a 50% humidity air atmosphere. The Dion-Jacobson 2D/3D inorganic perovskite solar cell (PSC) achieves a power conversion efficiency (PCE) of 19.5% with a Voc of 1.197 eV. It retains 83% of its initial PCE after 1260 h of maximum power point tracking under 1.2 sun illumination. The work demonstrates an effective way for stabilizing efficient inorganic perovskite solar cells.

Air- and water-stable and photocatalytically active germanium-based 2D perovskites by organic spacer engineering.

There is increasing interest in the role of metal halide perovskites for heterogeneous catalysis. Here, we report a Ge-based 2D perovskite material that shows intrinsic water stability realized through organic cation engineering. Incorporating 4-phenylbenzilammonium (PhBz) we demonstrate, by means of extended experimental and computational results, that PhBz2GeBr4 and PhBz2GeI4 can achieve relevant air and water stability. The creation of composites embedding graphitic carbon nitride (g-C3N4) allows a proof of concept for light-induced hydrogen evolution in an aqueous environment by 2D Ge-based perovskites thanks to the effective charge transfer at the heterojunction between the two semiconductors.

Charged excitons, Auger recombination and optical gain in CdSe/CdS nanocrystals.

CdSe/CdS colloidal nanocrystals are members of a novel class of light-emitting nanoparticles with remarkable optical properties such as suppressed fluorescence blinking and enhanced emission from multiexciton states. These properties have been linked to the suppression of non-radiative Auger recombination. In this work we employ ultrafast spectroscopy techniques to identify optical signatures of neutral and charged excitonic and multiexcitonic states. We show that Auger recombination of biexcitons is not suppressed, while we observe optical gain and amplified spontaneous emission from multiexciton states and from long-lived charged-exciton states.

Solid-State Nuclear Magnetic Resonance of Triple-Cation Mixed-Halide Perovskites.

Mixed-cation lead mixed-halide perovskites are the best candidates for perovskite-based photovoltaics, thanks to their higher efficiency and stability compared to the single-cation single-halide parent compounds. TripleMix (Cs0.05MA0.14FA0.81PbI2.55Br0.45 with FA = formamidinium and MA = methylammonium) is one of the most efficient and stable mixed perovskites for single-junction solar cells. The microscopic reasons why triple-cation perovskites perform so well are still under debate. In this work, we investigated the structure and dynamics of TripleMix by exploiting multinuclear solid-state nuclear magnetic resonance (SSNMR), which can provide this information at a level of detail not accessible by other techniques. 133Cs, 13C, 1H, and 207Pb SSNMR spectra confirmed the inclusion of all ions in the perovskite, without phase segregation. Complementary measurements showed a peculiar longitudinal relaxation behavior for the 1H and 207Pb nuclei in TripleMix with respect to single-cation single-halide perovskites, suggesting slower dynamics of both organic cations and halide anions, possibly related to the high photovoltaic performances.

Silicon-based fluorescent platforms for copper(ii) detection in water.

The potential of silicon-based fluorescent platforms for the detection of trace toxic metal ions was investigated in an aqueous environment. To this aim, silicon chips were first functionalized with amino groups, and fluorescein organic dyes, used as sensing molecules, were then covalently linked to the surface via formation of thiourea groups. The obtained hybrid heterostructures exhibited high sensitivity and selectivity towards copper(ii), a limit of detection compatible with the recommended upper limits for copper in drinking water, and good reversibility using a standard metal-chelating agent. The fluorophore-analyte interaction mechanism at the basis of the reported fluorescence quenching, as well as the potential of performance improvement, were also studied. The herein presented sensing architecture allows, in principle, tailoring of the selectivity towards other metal ions by proper fluorophore selection, and provides a favorable outlook for integration of fluorescent chemosensors with silicon photonics technology.

Impact of the Hole Transport Layer on the Charge Extraction of Ruddlesden-Popper Perovskite Solar Cells.

Recent works demonstrate that polyelectrolytes as a hole transport layer (HTL) offers superior performance in Ruddlesden-Popper perovskite solar cells (RPPSCs) compared to poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The factors contributing to such improvement need to be systematically investigated. To achieve this, we have systematically investigated how the two HTLs affect the morphology, crystallinity, and orientation of the Ruddlesden-Popper perovskite (RPP) films as well as the charge extraction of the RPPSCs. PEDOT:PSS as a HTL leads to RPP films of low crystallinity and with a number of large pinholes. These factors lead to poor charge carrier extraction and significant charge recombination in the RPPSCs. Conversely, a PCP-Na HTL gives rise to highly crystalline and pinhole-free RPPSC films. Moreover, a PCP-Na HTL provides a better energy alignment at the perovskite/HTL interface because of its higher work function compared to PEDOT:PSS. Consequently, devices using PCP-Na as HTLs are more efficient in extracting charge carriers.

Simple Processing Additive-Driven 20% Efficiency for Inverted Planar Heterojunction Perovskite Solar Cells.

Compositional engineering has been a strong tool to improve the quality of the perovskite materials and, in turn, the reproducibility of the solar cells. However, the control over the active layer uniformity, one of the most important requirements for the obtainment of efficient devices, is still a weak point of perovskite solar cells (PSCs) manufacturing. Here, we develop an approach to grow a uniform mixed cation perovskite layer, foreseeing its implementation in inverted solar cells endowing organic transporting layers, through the addition of a stoiochiometric amount of tropolone as chelating agent for the lead. Thanks to low melting and boiling temperatures, tropolone is present in the system only during the colloidal liquid phase, leaving the film during its formation; this unique characteristic promotes the obtainment of ideal perovskite surface morphologies and an increased short circuit current of photovoltaic devices. A maximum power conversion efficiency of 20% was obtained, with a 25% increase with respect to the reference.

Exciton-Exciton Interaction and Optical Gain in Colloidal CdSe/CdS Dot/Rod Nanocrystals.

Exciton-exciton interaction in dot/rod CdSe/CdS nanocrystals has proved to be very sensitive to the shape of nanocrystals, due to the unique band alignment between CdSe and CdS. Repulsive exciton-exciton interaction is demonstrated, which makes CdSe/CdS dot/rods promising gain media for solution-processable lasers, with projected pump threshold densities below 1 kW cm(-2) for continuous wave lasing.

Highly emissive nanostructured thin films of organic host-guests for energy conversion.

All-organic nanostructured host-guest systems, based on dyes inserted in the nanochannels of perhydrotriphenylene (PHTP) and deoxycholic acid (DCA), show enhanced fluorescence properties with quantum yields even higher than those of the dyes in solution, thanks to the high concentration of emissive molecules with controlled spatial and geometrical organization that prevents aggregation quenching. Both host molecules crystallize, growing with the long axis oriented along the direction of the nanochannels where the linear-chain dyes are inserted, to yield crystals emitting well-polarized light. For the DCA-based host-guests, homogeneous thin films suitable for several applications are obtained. Colour emission in such films can be tuned by co-inclusion of two or three dyes due to resonant energy-transfer processes. We show that films obtained by low-cost techniques, such as solution casting and spin-coating, convert UV light into visible light with an efficiency much higher than that of the standard polymeric blends.

Bifacial Diffuse Absorptance of Semitransparent Microstructured Perovskite Solar Cells.

An optical radiometry technique enabling simultaneous transmittance and reflectance measurements from both sides of a device was used to investigate bifacial diffuse absorptance of neutral-colored semitransparent perovskite solar cells based on a thin film of microsized perovskite islands. In such microstructured solar cells, diffuse irradiance was more effectively absorbed than direct irradiance at near-normal incidence, in contrast to reference solar cells comprising a continuous perovskite thin film. Experimental findings were discussed in ray-optic approximation in relation to the surface texture of the active layer, highlighting the role of light trapping. This absorptance spectroscopy technique is envisaged to find wide applicability to bifacial solar cells for building-integrated photovoltaics and other bifacial light-harvesting systems.

Novel Physical Vapor Deposition Approach to Hybrid Perovskites: Growth of MAPbI3 Thin Films by RF-Magnetron Sputtering.

Solution-based methods represent the most widespread approach used to deposit hybrid organic-inorganic perovskite films for low-cost but efficient solar cells. However, solution-process techniques offer limited control over film morphology and crystallinity, and most importantly do not allow sequential film deposition to produce perovskite-perovskite heterostructures. Here the successful deposition of CH3NH3PbI3 (MAPI) thin films by RF-magnetron sputtering is reported, an industry-tested method to grow large area devices with precisely controlled stoichiometry. MAPI films are grown starting from a single-target made of CH3NH3I (MAI) and PbI2. Films are single-phase, with a barely detectable content of unreacted PbI2, full surface coverage and thickness ranging from less than 200 nm to more than 3 µm. Light absorption and emission properties of the deposited films are comparable to as-grown solution-processed MAPI films. The development of vapor-phase deposition methods is of interest to advance perovskite photovoltaic devices with the possibility of fabricating perovskite multijunction solar cells or multicolor bright light-emitting devices in the whole visible spectrum.

Ultra-Bright Near-Infrared Perovskite Light-Emitting Diodes with Reduced Efficiency Roll-off.

Herein, an insulating biopolymer is exploited to guide the controlled formation of micro/nano-structure and physical confinement of α-δ mixed phase crystalline grains of formamidinium lead iodide (FAPbI3) perovskite, functioning as charge carrier concentrators and ensuring improved radiative recombination and photoluminescence quantum yield (PLQY). This composite material is used to build highly efficient near-infrared (NIR) FAPbI3 Perovskite light-emitting diodes (PeLEDs) that exhibit a high radiance of 206.7 W/sr*m2, among the highest reported for NIR-PeLEDs, obtained at a very high current density of 1000 mA/cm2, while importantly avoiding the efficiency roll-off effect. In depth photophysical characterization allows to identify the possible role of the biopolymer in i) enhancing the radiative recombination coefficient, improving light extraction by reducing the refractive index, or ii) enhancing the effective optical absorption because of dielectric scattering at the polymer-perovskite interfaces. Our study reveals how the use of insulating matrixes for the growth of perovskites represents a step towards high power applications of PeLEDs.