Carrier Scattering at Alloy Nanointerfaces Enhances Power Factor in PEDOT:PSS Hybrid Thermoelectrics.

UNLABELLED: This work demonstrates the first method for controlled growth of heterostructures within hybrid organic/inorganic nanocomposite thermoelectrics. Using a facile, aqueous technique, semimetal-alloy nanointerfaces are patterned within a hybrid thermoelectric system consisting of tellurium (Te) nanowires and the conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) ( PEDOT: PSS). Specifically, this method is used to grow nanoscale islands of Cu1.75Te alloy subphases within hybrid PEDOT: PSS-Te nanowires. This technique is shown to provide tunability of thermoelectric and electronic properties, providing up to 22% enhancement of the system's power factor in the low-doping regime, consistent with preferential scattering of low energy carriers. This work provides an exciting platform for rational design of multiphase nanocomposites and highlights the potential for engineering of carrier filtering within hybrid thermoelectrics via introduction of interfaces with controlled structural and energetic properties.

Solid-phase flexibility in Ag2Se semiconductor nanocrystals.

Nanocrystals are known to alter the relative stability of bulk solid phases. Here we test the limits of this effect on Ag2Se nanocrystals, a promising new electronic and infrared material. In the bulk, Ag2Se exhibits a solid-solid phase transition to a superionic conducting phase at moderate temperatures. We map this phase transition as a function of size, temperature, and surface treatment in Ag2Se core-only and core-shell nanocrystals. We show that the transition can be tuned not just below but also above the bulk phase-transition temperature. This phase flexibility has implications for applications in optoelectronic and phase-memory devices.

Complex chiral colloids and surfaces via high-index off-cut silicon.

Silicon wafers are commonly etched in potassium hydroxide solutions to form highly symmetric surface structures. These arise when slow-etching {111} atomic planes are exposed on standard low-index surfaces. However, the ability of nonstandard high-index wafers to provide more complex structures by tilting the {111} planes has not been fully appreciated. We demonstrate the power of this approach by creating chiral surface structures and nanoparticles of a specific handedness from gold. When the nanoparticles are dispersed in liquids, gold colloids exhibiting record molar circular dichroism (>5 × 10(9) M(-1) cm(-1)) at red wavelengths are obtained. The nanoparticles also present chiral pockets for binding.

The more the merrier: optimizing monomer concentration for supersaturation controlled synthesis of stable ultra-small CsPbBr3 nanocrystals for blue emission.

Synthesis of strongly quantum confined and emissive CsPbBr3 perovskite nanocrystals with sizes <4 nm has proven challenging owing to fast nucleation and rapid growth. In this work, ultra-small blue-emitting (∼461 nm) CsPbBr3 nanocrystals with an average particle size of 3.2 nm are synthesized via a high-temperature (170 °C) colloidal approach by controlling the supersaturation reaction conditions. Our approach yielded stable nanocrystals with uniform size, shape, and excellent color purity, making them promising for blue light emitting diode (LED) applications.

Dedoping of Intraband Silver Selenide Colloidal Quantum Dots through Strong Electronic Coupling at Organic/Inorganic Hybrid Interfaces.

Colloidal quantum dot (CQD) infrared (IR) photodetectors can be fabricated and operated with larger spectral tunability, fewer limitations in terms of cooling requirements and substrate lattice matching, and at a potentially lower cost than detectors based on traditional bulk materials. Silver selenide (Ag2Se) has emerged as a promising sustainable alternative to current state-of-the-art toxic semiconductors based on lead, cadmium, and mercury operating in the IR. However, an impeding gap in available absorption bandwidth for Ag2Se CQDs exists in the short-wave infrared (SWIR) region due to degenerate doping by the environment, switching the CQDs from intrinsic interband semiconductors in the near-infrared (NIR) to intraband absorbing CQDs in the mid-wave infrared (MWIR). Herein, we show that the small molecular p-type dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) can be used to extract electrons from the 1Se state of MWIR active Ag2Se CQDs to activate their intrinsic energy gap in the SWIR window. We demonstrate quenching of the MWIR Ag2Se absorbance peak, shifting of nitrile vibrational peaks characteristic of charge-neutral F4-TCNQ, as well as enhanced CQD absorption around ∼2500 nm after doping both in ambient and under air-free conditions. We elucidate the doping mechanism to be one that involves an integer charge transfer akin to doping in semiconducting polymers. These indications of charge transfer are promising milestones on the path to achieving sustainable SWIR Ag2Se CQD photodetectors.

Elucidating Local Structure and Positional Effect of Dopants in Colloidal Transition Metal Dichalcogenide Nanosheets for Catalytic Hydrogenolysis.

Tailoring nanoscale catalysts to targeted applications is a vital component in reducing the carbon footprint of industrial processes; however, understanding and controlling the nanostructure influence on catalysts is challenging. Molybdenum disulfide (MoS2), a transition metal dichalcogenide (TMD) material, is a popular example of a nonplatinum-group-metal catalyst with tunable nanoscale properties. Doping with transition metal atoms, such as cobalt, is one method of enhancing its catalytic properties. However, the location and influence of dopant atoms on catalyst behavior are poorly understood. To investigate this knowledge gap, we studied the influence of Co dopants in MoS2 nanosheets on catalytic hydrodesulfurization (HDS) through a well-controlled, ligand-directed, tunable colloidal doping approach. X-ray absorption spectroscopy and density functional theory calculations revealed the nonmonotonous relationship between dopant concentration, location, and activity in HDS. Catalyst activity peaked at 21% Co:Mo as Co saturates the edge sites and begins basal plane doping. While Co prefers to dope the edges over basal sites, basal Co atoms are demonstrably more catalytically active than edge Co. These findings provide insight into the hydrogenolysis behavior of doped TMDs and can be extended to other TMD materials.

Electronic impurity doping in CdSe nanocrystals.

We dope CdSe nanocrystals with Ag impurities and investigate their optical and electrical properties. Doping leads not only to dramatic changes but surprising complexity. The addition of just a few Ag atoms per nanocrystal causes a large enhancement in the fluorescence, reaching efficiencies comparable to core-shell nanocrystals. While Ag was expected to be a substitutional acceptor, nonmonotonic trends in the fluorescence and Fermi level suggest that Ag changes from an interstitial (n-type) to a substitutional (p-type) impurity with increased doping.

Size- and temperature-dependent charge transport in PbSe nanocrystal thin films.

We report the size- and temperature-dependence of electron transport in thin films of PbSe nanocrystals. Upon increasing temperature over the range 28-200 K, the electron transport underwent a transition in mechanism from Efros-Shklovskii-variable-range-hopping (ES-VRH) to nearest-neighbor-hopping (NNH). The transition occurred at higher temperatures for films with smaller particles. The electron localization length, estimated from the ES-VRH model, was comparable to the nanocrystal size and scaled systematically with nanocrystal diameter. The activation energy from the NNH regime was also size-dependent, which is attributed both to size-dependent Coulomb effects and the size-distribution of nanocrystals.

Vanishing Confinement Regime in Terahertz HgTe Nanocrystals Studied under Extreme Conditions of Temperature and Pressure.

While HgTe nanocrystals (NCs) in the mid-infrared region have reached a high level of maturity, their far-infrared counterparts remain far less studied, raising the need for an in-depth investigation of the material before efficient device integration can be considered. Here, we explore the effect of temperature and pressure on the structural, spectroscopic, and transport properties of HgTe NCs displaying an intraband absorption at 10 THz. The temperature leads to a very weak modulation of the spectrum as opposed to what was observed for strongly confined HgTe NCs. HgTe NC films present ambipolar conduction with a clear prevalence of electron conduction as confirmed by transistor and thermoelectric measurements. Under the application of pressure, the material undergoes phase transitions from the zinc blende to cinnabar phase and later to the rock salt phase which we reveal using joint X-ray diffraction and infrared spectroscopy measurements. We discuss how the pressure existence domain of each phase is affected by the particle size.

Facile synthesis of silver chalcogenide (Ag2E; E=Se, S, Te) semiconductor nanocrystals.

A general, one-pot, single-step method for producing colloidal silver chalcogenide (Ag(2)E; E = Se, S, Te) nanocrystals is presented, with an emphasis on Ag(2)Se. The method avoids exotic chemicals, high temperatures, and high pressures and requires only a few minutes of reaction time. While Ag(2)S and Ag(2)Te are formed in their low-temperature monoclinic phases, Ag(2)Se is obtained in a metastable tetragonal phase not observed in the bulk.

Size-dependent electrical transport in CdSe nanocrystal thin films.

Electrical transport in films of CdSe nanocrystals with diameters varying from 2.9 to 5.1 nm was examined over 233-300 K by employing electrolyte gating to control the electron density. The transport parameters varied strongly and systematically with nanocrystal diameter. First, a strong correlation was observed between the device turn-on voltage and the size-dependent position of the lowest unoccupied electronic states of the nanocrystals. Second, the electron mobility increased with increasing particle diameter and reached a high value of 0.6 cm(2)/(V s) for films with 5.1 nm nanocrystals. Third, the charge transport could be described in terms of the nearest-neighbor-hopping mechanism with a size-dependent activation energy and a pre-exponential factor for mobility. The activation energy can be viewed as a size-dependent charging energy of an individual nanocrystal. Collectively, the combination of size- and temperature-dependent measurements provides a powerful approach to understanding electrical transport in nanocrystal films.

High-performance thermoelectric silver selenide thin films cation exchanged from a copper selenide template.

Over the past decade, Ag2Se has attracted increasing attention due to its potentially excellent thermoelectric (TE) performance as an n-type semiconductor. It has been considered a promising alternative to Bi-Te alloys and other commonly used yet toxic and/or expensive TE materials. To optimize the TE performance of Ag2Se, recent research has focused on fabricating nanosized Ag2Se. However, synthesizing Ag2Se nanoparticles involves energy-intensive and time-consuming techniques with poor yield of final product. In this work, we report a low-cost, solution-processed approach that enables the formation of Ag2Se thin films from Cu2-x Se template films via cation exchange at room temperature. Our simple two-step method involves fabricating Cu2-x Se thin films by the thiol-amine dissolution of bulk Cu2Se, followed by soaking Cu2-x Se films in AgNO3 solution and annealing to form Ag2Se. We report an average power factor (PF) of 617 ± 82 µW m-1 K-2 and a corresponding ZT value of 0.35 at room temperature. We obtained a maximum PF of 825 µW m-1 K-2 and a ZT value of 0.46 at room temperature for our best-performing Ag2Se thin-film after soaking for 5 minutes. These high PFs have been achieved via full solution processing without hot-pressing.

Synthesis of luminescent core/shell α-Zn3P2/ZnS quantum dots.

Metal chalcogenide nanoparticles offer vast control over their optoelectronic properties via size, shape, composition, and morphology which has led to their use across fields including optoelectronics, energy storage, and catalysis. While cadmium and lead-based nanocrystals are prevalent in applications, concerns over their toxicity have motivated researchers to explore alternate classes of nanomaterials based on environmentally benign metals such as zinc and tin. The goal of this research is to identify material systems that offer comparable performance to existing metal chalcogenide systems from abundant, recyclable, and environmentally benign materials. With band gaps that span the visible through the infrared, II-V direct band gap semiconductors such as tetragonal zinc phosphide (α-Zn3P2) are promising candidates for optoelectronics. To date, syntheses of α-Zn3P2 nanoparticles have been hindered because of the toxicity of zinc and phosphorus precursors, surface oxidation, and defect states leading to carrier trapping and low photoluminescence quantum yield. This work reports a colloidal synthesis of quantum confined α-Zn3P2 nanoparticles from common phosphorus precursor tris(trimethylsilyl)phosphine and environmentally benign zinc carboxylates. Shelling of the nanoparticles with zinc sulfide is shown as a method of preventing oxidation and improving the optical properties of the nanoparticles. These results show a route to stabilizing α-Zn3P2 nanoparticles for optoelectronic device applications.

Anisotropic Magnetic Resonance in Random Nanocrystal Quantum Dot Ensembles.

Magnetic anisotropy critically determines the utility of magnetic nanocrystals (NCs) in new nanomagnetism technologies. Using angular-dependent electron magnetic resonance (EMR), we observe magnetic anisotropy in isotropically arranged NCs of a nonmagnetic material. We show that the shape of the EMR angular variation can be well described by a simple model that considers magnetic dipole-dipole interactions between dipoles randomly located in the NCs, most likely due to surface dangling bonds. The magnetic anisotropy results from the fact that the energy term arising from the magnetic dipole-dipole interactions between all magnetic moments in the system is dominated by only a few dipole pairs, which always have an anisotropic geometric arrangement. Our work shows that magnetic anisotropy may be a general feature of NC systems containing randomly distributed magnetic dipoles.

In-situ resonant band engineering of solution-processed semiconductors generates high performance n-type thermoelectric nano-inks.

Thermoelectric devices possess enormous potential to reshape the global energy landscape by converting waste heat into electricity, yet their commercial implementation has been limited by their high cost to output power ratio. No single "champion" thermoelectric material exists due to a broad range of material-dependent thermal and electrical property optimization challenges. While the advent of nanostructuring provided a general design paradigm for reducing material thermal conductivities, there exists no analogous strategy for homogeneous, precise doping of materials. Here, we demonstrate a nanoscale interface-engineering approach that harnesses the large chemically accessible surface areas of nanomaterials to yield massive, finely-controlled, and stable changes in the Seebeck coefficient, switching a poor nonconventional p-type thermoelectric material, tellurium, into a robust n-type material exhibiting stable properties over months of testing. These remodeled, n-type nanowires display extremely high power factors (~500 µW m-1K-2) that are orders of magnitude higher than their bulk p-type counterparts.

Colloidal quantum dots for thermal infrared sensing and imaging.

Colloidal quantum dots provide a powerful materials platform to engineer optoelectronics devices, opening up new opportunities in the thermal infrared spectral regions where no other solution-processed material options exist. This mini-review collates recent research reports that push the technological envelope of colloidal quantum dot-based photodetectors toward mid- and long-wavelength infrared. We survey the synthesis and characterization of various thermal infrared colloidal quantum dots reported to date, discuss the basic theory of device operation, review the fabrication and measurement of photodetectors, and conclude with the future prospect of this emerging technology.

Long-Range Order in Nanocrystal Assemblies Determines Charge Transport of Films.

Self-assembly of semiconductor nanocrystals (NCs) into two-dimensional patterns or three-dimensional (2-3D) superstructures has emerged as a promising low-cost route to generate thin-film transistors and solar cells with superior charge transport because of enhanced electronic coupling between the NCs. Here, we show that lead sulfide (PbS) NCs solids featuring either short-range (disordered glassy solids, GSs) or long-range (superlattices, SLs) packing order are obtained solely by controlling deposition conditions of colloidal solution of NCs. In this study, we demonstrate the use of the evaporation-driven self-assembly method results in PbS NC SL structures that are observed over an area of 1 mm × 100 µm, with long-range translational order of up to 100 nm. A number of ordered domains appear to have nucleated simultaneously and grown together over the whole area, imparting a polycrystalline texture to the 3D SL films. By contrast, a conventional, optimized spin-coating deposition method results in PbS NC glassy films with no translational symmetry and much shorter-range packing order in agreement with state-of-the-art reports. Further, we investigate the electronic properties of both SL and GS films, using a field-effect transistor configuration as a test platform. The long-range ordering of the PbS NCs into SLs leads to semiconducting NC-based solids, the mobility (µ) of which is 3 orders of magnitude higher than that of the disordered GSs. Moreover, although spin-cast GSs of PbS NCs have weak ambipolar behavior with limited gate tunability, SLs of PbS NCs show a clear p-type behavior with significantly higher conductivities.

Solution-Processed Cu2Se Nanocrystal Films with Bulk-Like Thermoelectric Performance.

Thermoelectric power generation can play a key role in a sustainable energy future by converting waste heat from power plants and other industrial processes into usable electrical power. Current thermoelectric devices, however, require energy intensive manufacturing processes such as alloying and spark plasma sintering. Here, we describe the fabrication of a p-type thermoelectric material, copper selenide (Cu2Se), utilizing solution-processing and thermal annealing to produce a thin film that achieves a figure of merit, ZT, which is as high as its traditionally processed counterpart, a value of 0.14 at room temperature. This is the first report of a fully solution-processed nanomaterial achieving performance equivalent to its bulk form and represents a general strategy to reduce the energy required to manufacture advanced energy conversion and harvesting materials.

Engineering Synergy: Energy and Mass Transport in Hybrid Nanomaterials.

An emerging class of materials that are hybrid in nature is propelling a technological revolution in energy, touching many fundamental aspects of energy-generation, storage, and conservation. Hybrid materials combine classical inorganic and organic components to yield materials that manifest new functionalities unattainable in traditional composites or other related multicomponent materials, which have additive function only. This Research News article highlights the exciting materials design innovations that hybrid materials enable, with an eye toward energy-relevant applications involving charge, heat, and mass transport.

Influence of silver doping on electron transport in thin films of PbSe nanocrystals.

Field-effect transistors are fabricated from thin films of Ag-doped PbSe nanocrystals to analyze the influence of electronically active impurities on electrical transport in this important material for nanocrystal applications. Data is collected as a function of nanocrystal size, dopant concentration, and temperature. Changes in the Fermi level and transport parameters indicate that Ag is acting as a p-type dopant (acceptor).