Effect of Ionization Degree of Poly(amidoamine) Dendrimer and 5-Fluorouracil on the Efficiency of Complex Formation-A Theoretical and Experimental Approach.

Due to their unique structure, poly(amidoamine) (PAMAM) dendrimers can bind active ingredients in two ways: inside the structure or on their surface. The location of drug molecules significantly impacts the kinetics of active substance release and the mechanism of internalization into the cell. This study focuses on the effect of the protonation degree of the G4PAMAM dendrimer and the anticancer drug 5-fluorouracil (5FU) on the efficiency of complex formation. The most favorable conditions for constructing the G4PAMAM-5FU complex are a low degree of protonation of the dendrimer molecule with the drug simultaneously present in a deprotonated form. The fluorine components in the XPS spectra confirm the formation of the stable complex. Through SAXS and DLS methods, a decrease in the dendrimer's molecular size resulting from protonation changes at alkaline conditions was demonstrated. The gradual closure of the dendrimer structure observed at high pH values makes it difficult for the 5FU molecules to migrate to the interior of the support structure, thereby promoting drug immobilization on the surface. The 1H NMR and DOSY spectra indicate that electrostatic interactions determine the complex formation process. Through MD simulations, the localization profile and the number of 5FU molecules forming the complex were visualized on an atomic scale.

Buffer-specific effects arise from ionic dispersion forces.

Buffer solutions do not simply regulate pH, but also change the properties of protein molecules. The zeta potential of lysozyme varies significantly at the same buffer concentration, in the order Tris > phosphate > citrate, with citrate even inverting the zeta potential, usually positive at pH 7.15, to a negative value. This buffer-specific effect is a special case of the Hofmeister effect. Here we present a theoretical model of these buffer-specific effects using a Poisson-Boltzmann description of the buffer solution, modified to include dispersion forces of all ions interacting with the lysozyme surface. Dispersion coefficients are determined from quantum chemical polarizabilites calculated for each ion for tris, phosphate, and citrate buffer solutions. The lysozyme surface charge is controlled by charge regulation of carboxylate and amine sites of the component amino acids. The theoretical model satisfactorily reproduces experimental zeta potentials, including change of sign with citrate, when hydration of small cosmotropic ions (Na+, H+, OH-) is included.

Aurivillius Oxides Nanosheets-Based Photocatalysts for Efficient Oxidation of Malachite Green Dye.

Aurivillius oxides ferroelectric layered materials are formed by bismuth oxide and pseu-do-perovskite layers. They have a good ionic conductivity, which is beneficial for various photo-catalyzed reactions. Here, we synthesized ultra-thin nanosheets of two different Aurivillius oxides, Bi2WO6 (BWO) and Bi2MoO6 (BMO), by using a hard-template process. All materials were characterized through XRD, TEM, FTIR, TGA/DSC, DLS/ELS, DRS, UV-Vis. Band gap material (Eg) and potential of the valence band (EVB) were calculated for BWO and BMO. In contrast to previous reports on the use of multi composite materials, a new procedure for photocatalytic efficient BMO nanosheets was developed. The procedure, with an additional step only, avoids the use of composite materials, improves crystal structure, and strongly reduces impurities. BWO and BMO were used as photocatalysts for the degradation of the water pollutant dye malachite green (MG). MG removal kinetics was fitted with Langmuir-Hinshelwood model obtaining a kinetic constant k = 7.81 × 10-2 min-1 for BWO and k = 9.27 × 10-2 min-1 for BMO. Photocatalytic dye degradation was highly effective, reaching 89% and 91% MG removal for BWO and BMO, respectively. A control experiment, carried out in the absence of light, allowed to quantify the contribution of adsorption to MG removal process. Adsorption contributed to MG removal by a 51% for BWO and only by a 19% for BMO, suggesting a different degradation mechanism for the two photocatalysts. The advanced MG degradation process due to BMO is likely caused by the high crystallinity of the material synthetized with the new procedure. Reuse tests demonstrated that both photocatalysts are highly active and stable reaching a MG removal up to 95% at the 10th reaction cycle. These results demonstrate that BMO nanosheets, synthesized with an easy additional step, achieved the best degradation performance, and can be successfully used for environmental remediation applications.

Adsorption of Malachite Green and Alizarin Red S Dyes Using Fe-BTC Metal Organic Framework as Adsorbent.

Synthetic organic dyes are widely used in various industrial sectors but are also among the most harmful water pollutants. In the last decade, significant efforts have been made to develop improved materials for the removal of dyes from water, in particular, on nanostructured adsorbent materials. Metal organic frameworks (MOFs) are an attractive class of hybrid nanostructured materials with an extremely wide range of applications including adsorption. In the present work, an iron-based Fe-BTC MOF, prepared according to a rapid, aqueous-based procedure, was used as an adsorbent for the removal of alizarin red S (ARS) and malachite green (MG) dyes from water. The synthesized material was characterized in detail, while the adsorption of the dyes was monitored by UV-Vis spectroscopy. An optimal adsorption pH of 4, likely due to the establishment of favorable interactions between dyes and Fe-BTC, was found. At this pH and at a temperature of 298 K, adsorption equilibrium was reached in less than 30 min following a pseudo-second order kinetics, with k″ of 4.29 × 10-3 and 3.98 × 10-2 g∙mg-1 min-1 for ARS and MG, respectively. The adsorption isotherm followed the Langmuir model with maximal adsorption capacities of 80 mg∙g-1 (ARS) and 177 mg∙g-1 (MG), and KL of 9.30·103 L∙mg-1 (ARS) and 51.56·103 L∙mg-1 (MG).

Adsorption and Release of Sulfamethizole from Mesoporous Silica Nanoparticles Functionalised with Triethylenetetramine.

Mesoporous silica nanoparticles (MSN) were synthesised and functionalised with triethylenetetramine (MSN-TETA). The samples were fully characterised (transmission electron microscopy, small angle X-ray scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potential and nitrogen adsorption/desorption isotherms) and used as carriers for the adsorption of the antimicrobial drug sulphamethizole (SMZ). SMZ loading, quantified by UV-Vis spectroscopy, was higher on MSN-TETA (345.8 mg g-1) compared with bare MSN (215.4 mg g-1) even in the presence of a lower surface area (671 vs. 942 m2 g-1). The kinetics of SMZ adsorption on MSN and MSN-TETA followed a pseudo-second-order model. The adsorption isotherm is described better by a Langmuir model rather than a Temkin or Freundlich model. Release kinetics showed a burst release of SMZ from bare MSN samples (k1 = 136 h-1) in contrast to a slower release found with MSN-TETA (k1 = 3.04 h-1), suggesting attractive intermolecular interactions slow down SMZ release from MSN-TETA. In summary, the MSN surface area did not influence SMZ adsorption and release. On the contrary, the design of an effective drug delivery system must consider the intermolecular interactions between the adsorbent and the adsorbate.

Antibacterial activity of Zn-loaded Cuban zeolite against Helicobacter pylori in comparison to its Na-loaded and unmodified counterparts.

Helicobacter pylori can be found in the stomach of about half of the humans, and a large population can be associated with serious diseases. To survive in the stomach H. pylori increases the pH locally by producing ammonia which binds to H+ becoming ammonium. This work investigated the effects on the in-vitro growth of H. pylori of a natural cation-exchanger mainly composed (≈70%) of clinoptilolite and mordenite. The zeolitized material from Cuba was evaluated in its original form (M), as well as in its Na- (M-Na) and Zn-exchanged (M-Zn) counterparts. In the preliminary agar cup diffusion test, H. pylori revealed susceptibility only to M-Zn, with a direct relationship between concentration and width of inhibition halo. Further experiments evidenced that bacterium replication increases when ammonium is supplied to the growth medium and decreases when zeolites subtract NH4+ via ion exchange. Due to the multi-cationic population of its zeolites M was not effective enough in removing ammonium and, in the Minimum Inhibitory Concentration (MIC) test, allowed bacterial growth even at a concentration of 50 mg/mL. Inhibition was achieved with M-Na because it contained sodium zeolites capable of maximizing NH4+ subtraction, although the MIC was high (30 mg/mL). M-Zn evidenced a more effective inhibitory capacity, with a MIC of 4 mg/mL. Zinc has antimicrobial properties and H. pylori growth was affected by Zn2+ released from clinoptilolite and mordenite. These zeolites, being more selective towards NH4+ than Zn2+, can also subtract ammonium to the bacterium, thus enhancing the efficacy of M-Zn.

Specific Anion Effects on Lipase Adsorption and Enzymatic Synthesis of Biodiesel in Nonaqueous Media.

Pseudomonas fluorescens lipase (Pfl) was adsorbed on macroporous polypropylene to obtain a heterogeneous biocatalyst. The effect of NaCl concentration and of different 100 mm sodium salts on the Pfl loading and catalytic performance toward biodiesel synthesis via the solvent-free methanolysis of triglycerides was studied. Although lipase adsorption onto polypropylene is governed by hydrophobic interactions, both salt concentration and anion type affect lipase loading. Protein loading decreased along the series: Cl- > SO42- ≈ no salt > Br- > I- > SCN- > F- > AcO-. This nonmonotonic ion-specific trend can be the result of opposite mechanisms occurring during the adsorption step. A similar trend is observed also for triglyceride conversion and biodiesel yield. It is likely that ions affect the microenvironment of the adsorbed lipase by interacting specifically with the hydration water and polypeptide chains, thus affecting enzyme catalysis.

Specific ion effects on the enzymatic activity of alcohol dehydrogenase from Saccharomyces cerevisiae.

The enzymatic activity of alcohol dehydrogenase (ADH) in the presence of a range of electrolytes is investigated. In the presence of 150 and 200 mM cations a substantial increase in activity following the series GnCl < CsCl < KCl ∼ NaCl < LiCl was observed with a 69% increase in the presence of KCl 200 mM with respect to the salt-free solution. In the presence of 150 and 200 mM anions the increase in activity followed an ion specific trend NaF ∼ NaCl ∼ NaBr > no salt > NaClO4 > NaSCN with a peak in activity increase of 75% in the presence of NaBr. The values of the Michaelis-Menten constant (Km) did not show any significant ion specific effect, while the maximum rate (Vmax) of ethanol oxidation to acetaldehyde was strongly ion specific. The changes in specific activity and Vmax in the presence of anions likely arises from ion specific interactions with charged residues in the active site of ADH. The data indicate that the enzymatic activity of alcohol dehydrogenase can be modulated by the nature of electrolytes at physiological concentration.

A thermodynamic correction to the theory of competitive chemisorption of ions at surface sites with nonelectrostatic physisorption.

We resolve a thermodynamic inconsistency in previous theoretical descriptions of the free energy of chemisorption (charge regulation) under conditions where nonelectrostatic physisorption is included, as applied to surface forces and particle-particle interactions. We clarify the role of nonelectrostatic ion physisorption energies and show that a term previously thought to represent physisorbed ion concentrations (activities) should instead be interpreted as a "partial ion activity" based solely on the electrostatic physisorption energy and bulk concentration, or alternatively on the nonelectrostatic physisorption energy and surface concentration. Second, the chemisorption energy must be understood as the change in chemical potential after subtracting the electrostatic energy, not subtracting the physisorption energy. Consequently, a previously reported specific ion nonelectrostatic physisorption contribution to the chemisorption free energy is annulled. We also report a correction to the calculation of surface charge. The distinction in "partial ion activity" evaluated from bulk concentration or from surface concentration opens a way to study nonequilibrium forces where chemisorption is in equilibrium with physisorbed ions but not in equilibrium with bulk ions, e.g., by a jump in ion concentrations.

Gold Nanoparticles: A Powerful Tool to Visualize Proteins on Ordered Mesoporous Silica and for the Realization of Theranostic Nanobioconjugates.

Ordered mesoporous silica (OMS) is a very interesting nanostructured material for the design and engineering of new target and controlled drug-delivery systems. Particularly relevant is the interaction between OMS and proteins. Large pores (6­9 nm) micrometric particles can be used for the realization of a drug depot system where therapeutic proteins are adsorbed either inside the mesopores or on the external surface. Small pores (1­2 nm) mesoporous silica nanoparticles (MSNs), can be injected in the blood stream. In the latter case, therapeutic proteins are mainly adsorbed on the MSNs' external surface. Whenever a protein-OMS conjugate is prepared, a diagnostic method to locate the protein either on the internal or the external silica surface is of utmost importance. To visualize the fine localization of proteins adsorbed in mesoporous silica micro- and nanoparticles, we have employed specific transmission electron microscopy (TEM) analytical strategies based on the use of gold nanoparticles (GNPs) conjugates. GNPs are gaining in popularity, representing a fundamental tool to design future applications of MSNs in nanomedicine by realizing theranostic nanobioconjugates. It may be pointed out that we are at the very beginning of a new age of the nanomaterial science: the "mesoporous golden age".

Engineered microparticles based on drug-polymer coprecipitates for ocular-controlled delivery of Ciprofloxacin: influence of technological parameters.

Ciprofloxacin is a drug active against a broad spectrum of aerobic Gram-positive and Gram-negative bacteria, for the therapy of ocular infections. It requires frequent administrations owing to rapid ocular clearance and it is a good candidate for ocular controlled release formulations. The preparation of such drug release systems is still a challenge. Ionic interactions between ciprofloxacin and the polyelectrolytes chondroitin sulfate or lambda carrageenan result in coprecipitates that can act as microparticulate controlled release systems from which the drug is released after being displaced by the medium's ions. In some formulations, Carbopol was added to improve the mucoadhesive properties. The aim of this research was the study of the influence of the technological parameters of the preparation method of coprecipitates on their particle size, with the goal of achieving particles engineered with a size suitable for the ocular administration. Technological parameters taken into account were: concentration of drug and polymer solutions utilized for the preparation of interaction products, possible use of surfactants (kind and concentration), temperature of the solutions and stirring during the process of preparation of the coprecipitates. Preliminary stability study tests were carried out to further characterize the leader formulation. Particle size in suspensions for ocular drug delivery is a critical parameter influencing the quality of the formulation. The results obtained from this study show that chondroitin sulfate coprecipitates present the best characteristics in terms of particle size suitable for ocular administration. A further improvement of the particle size characteristics has been obtained with the addition of surfactants.

Silver Enhancement for Transmission Electron Microscopy Imaging of Antibody Fragment-Gold Nanoparticles Conjugates Immobilized on Ordered Mesoporous Silica.

Ordered mesoporous silica (OMS) materials are receiving great attention as possible carriers for valuable but unstable drugs as, for example, therapeutic proteins. A key issue is to prove that the therapeutic protein is effectively able to penetrate the pores of OMS during the adsorption step. Here, we immobilized an antibody fragment [F(ab')GAMIgG] conjugated with ultrasmall gold nanoparticles (GNPs) onto amino-functionalized SBA-15 (SBA-NH2) mesoporous silica. The aim of this work is the visualization of the location of the conjugates adsorbed onto SBA-NH2 with transmission electron microscopy (TEM). Because of the ultrasmall size of GNPs (<1 nm), we use the silver enhancement procedure to amplify their size. In this procedure, ultrathin sections of conjugate-loaded SBA-NH2 particles are prepared by a ultramicrotome sectioning technique. The ultrasmall GNPs located on the top side of the 70-90 nm thick slices act as microcrystallization nucleation sites for the deposition of reduced metallic silver. Consequently, the ultrasmall GNPs increase their size. This allows for the direct imaging of the conjugates adsorbed. We clearly localize the F(ab')GAMIgG-GNPs conjugates either on the external surface of the particles or inside the mesopores of SBA-NH2 through TEM.

The impact of the competitive adsorption of ions at surface sites on surface free energies and surface forces.

The relationship between surface charge and surface potential at the solid-liquid interface is often determined by a charge regulation process, the chemisorption of a potential determining ion such as H(+). A subtle ion-specific effect can be observed when other ions compete with the primary potential determining ion to bind to a surface site. Site competition may involve alternative ions competing for a first binding site, e.g., metals ions competing with H(+) to bind to a negatively charged oxide or carboxyl site. Second-binding sites with site competition may also be found, including amphoteric OH2 (+) sites, or anion binding to amine groups. In this work, a general theoretical model is developed to describe the competitive adsorption of ions at surface sites. Applied to the calculation of forces, the theory predicts a 20% increase in repulsion between titania surfaces in 1 mM NaCl, and a 25% reduction in repulsion between silica surfaces in 0.1M NaCl compared to calculations neglecting ion site competition.

Models and mechanisms of Hofmeister effects in electrolyte solutions, and colloid and protein systems revisited.

Specific effects of electrolytes have posed a challenge since the 1880's. The pioneering work was that of Franz Hofmeister who studied specific salt induced protein precipitation. These effects are the rule rather the exception and are ubiquitous in chemistry and biology. Conventional electrostatic theories (Debye-Hückel, DLVO, etc.) cannot explain such effects. Over the past decades it has been recognised that additional quantum mechanical dispersion forces with associated hydration effects acting on ions are missing from theory. In parallel Collins has proposed a phenomenological set of rules (the law of matching water affinities, LMWA) which explain and bring to order the order of ion-ion and ion-surface site interactions at a qualitative level. The two approaches appear to conflict. Although the need for inclusion of quantum dispersion forces in one form or another is not questioned, the modelling has often been misleading and inappropriate. It does not properly describe the chemical nature (kosmotropic/chaotropic or hard/soft) of the interacting species. The success of the LMWA rules lies in the fact that they do. Here we point to the way that the two apparently opposing approaches might be reconciled. Notwithstanding, there are more challenges, which deal with the effect of dissolved gas and its connection to 'hydrophobic' interactions, the problem of water at different temperatures and 'water structure' in the presence of solutes. They take us to another dimension that requires the rebuilding of theoretical foundations.

Relationships between the properties of self-emulsifying pellets and of the emulsions used as massing liquids for their preparation.

Self-emulsifying pellets were prepared using microcrystalline cellulose, emulsions of caprylic/capric triglyceride, and three Cremophors (ELP, RH40, and RH60) at 1.5 and 2.3 weight ratios, and two drugs (furosemide and propranolol) of different lipophilicity. Droplet size, zeta potential (ζ) and viscosity of emulsions, and pellet size, shape, friability, tensile strength, disintegration, and drug migration in pellets were determined. Evaluation of reconstituted emulsions was based on droplet size and ζ. Factorial design and 3-way ANOVA was applied to estimate the significance of the effects of the drug, surfactant and oil/surfactant ratio. It was found that droplet size, viscosity and ζ of emulsions, and size, shape, and friability of pellets were affected by the studied factors and were significant interactions between their effects on pellet size and friability. Migration of drug towards the pellet surface was higher for the less lipophilic furosemide and higher oil content. Linear relationships were found between the emulsion viscosity and the shape parameters of the pellets (for the aspect ratio R (2) = 0.796 for furosemide and R (2) = 0.885 for propranolol and for the shape factor, e R R (2) = 0.740 and R (2) = 0.960, respectively). For all the formulations examined, an exponential relationship was found between migration (M%) and the product of viscosity (η) and solubility of drug in oil/surfactant mixture (S) (M% = 98.1e-0.016 [η•S], R (2) = 0.856), which may be useful in formulation work.

Adsorption of lysozyme on hyaluronic acid functionalized SBA-15 mesoporous silica: a possible bioadhesive depot system.

Silica-based ordered mesoporous materials are very attractive matrices to prepare smart depot systems for several kinds of therapeutic agents. This work focuses on the well-known SBA-15 mesoporous silica and lysozyme, an antimicrobial protein. In order to improve the bioadhesion properties of SBA-15 particles, the effect of hyaluronic acid (HA) functionalization on lysozyme adsorption was investigated. SBA-15 samples having high (H-SBA) and low (L-SBA) levels of functionalization were analyzed during the three steps of the preparations: (1) introduction of the -NH2 groups to obtain the SBA-NH2 samples; (2) functionalization with HA to obtain the SBA-HA matrices; (3) adsorption of lysozyme. All silica matrices were characterized through N2-adsorption/desorption isotherms, small-angle X-ray scattering, transmission electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The whole of the experimental data suggests that a high level of functionalization of the silica surface allows for a negligible lysozyme adsorption mainly due to unfavorable electrostatic interactions (H-SBA-NH2) or steric hindrance (H-SBA-HA). A low degree of functionalization of the silica surface brings about a very good performance toward lysozyme adsorption, being 71% (L-SBA-NH2) and 63% (L-SBA-HA) respectively, compared to that observed for original SBA-15. Finally, two different kinetic models--a "pseudo-second order" and a "intraparticle diffusion"--were compared to fit lysozyme adsorption data, the latter being more reliable than the former.

A multichannel closed bipolar platform to visual electrochemiluminescence sensing of caffeic acid as a model: Potential for multiplex detection.

In this study, a fully-featured electrochemiluminescence (ECL) sensing platform based on a multichannel closed bipolar system (closed-BP, C-BP) for the determination of caffeic acid (CA) was successfully developed. The system comprises three individual reservoirs connected to each other by two pairs of gold rods as bipolar electrodes. Moreover, a single pair of gold rods functions as the driving electrodes. Due to configuration consisting of three channels and double-bipolar electrodes, the detection of CA was accomplished in two oxidation and reduction pathways within a single device. Firstly, through close observation of the reactions occurring within the device and utilizing a universal pH indicator and bipolar electrodes, a precise mechanism for the current bipolar systems was initially proposed. Then, the concentration of CA was monitored in the reporting chamber through the following ECL intensities resulting from luminol oxidation and H2O2. The monitoring process was performed using both a photomultiplier tube (PMT) and a digital camera. In the process of analyte oxidation, the PMT and visual (camera)-based detection exhibited a linear response from 5 µmol L-1 to 700 µmol L-1 (limit of detection (LOD) 1.2 µmol L-1) and 50 µmol L-1 to 600 µmol L-1 (LOD 14.8 µmol L-1), respectively. In the analyte reduction pathway, the respective values were 30 µmol L-1 to 450 µmol L-1 (LOD 8.6 µmol L-1) and 55 µmol L-1 to 400 µmol L-1 (LOD 21.2 µmol L-1), for the PMT and visual-based detection, respectively. Our experiments have demonstrated the practical application of the sensor array for efficient and high-performance analysis. This innovative design holds significant potential for diverse fields and paves the way for the development of a user-friendly device.

Specific cation effects on hemoglobin aggregation below and at physiological salt concentration.

Turbidity titrations are used to study the ion specific aggregation of hemoglobin (Hb) below and physiological salt concentration in the pH range 4.5-9.5. At a salt concentration 50 mM cations promote Hb aggregation according to the order Rb(+) > K(+) ~ Na(+) > Cs(+) > Li(+). The cation series changes if concentration is increased, becoming K(+) > Rb(+) > Na(+) > Li(+) > Cs(+) at 150 mM. We interpret the puzzling series by assuming that the kosmotropic Li(+) will bind to kosmotropic carboxylates groups-according to the law of matching water affinities (LMWA)-whereas the chaotropic Cs(+) will bind to uncharged protein patches due to its high polarizability. In fact, both mechanisms can be rationalized by invoking previously neglected ionic nonelectrostatic forces. This explains both adsorption to uncharged patches and the LMWA as a consequence of the simultaneous action of electrostatic and dispersion forces. The same interpretation applies to anions (with chaotropic anions binding to chaotropic amine groups). The implications extend beyond hemoglobin to other, still unexplained, ion specific effects in biological systems.

Proactive and reactive effects of vigorous exercise on learning and vocabulary comprehension.

College students (N = 90) were randomly assigned to participate in vigorous, moderate or no physical exercise and vocabulary recall and comprehension learning activities under varying conditions to assess whether or not increased intensities of exercise, performed either before a vocabulary recall and comprehension learning activity (i.e., proactive effect) or after a vocabulary recall and comprehension learning activity (i.e., reactive effect), would improve vocabulary recall and comprehension. The results demonstrated that performing exercise at a vigorous intensity before or after rehearsing for a vocabulary comprehension test improved test results.

Cation and buffer specific effects on the DNA-lipid interaction.

Knowledge of DNA - lipid layer interactions is key for the development of biosensors, synthetic nanopores, scaffolds, and gene-delivery systems. These interactions are strongly affected by the ionic composition of the solvent. We have combined quartz crystal microbalance (QCM) and ellipsometry measurements to reveal how pH, buffers and alkali metal chloride salts affect the interaction of DNA with lipid bilayers (DOTAP/DOPC 30:70 in moles). We found that the thickness of the DNA layer adsorbed onto the lipid bilayer decreased in the order citrate > phosphate > Tris > HEPES. The effect of cations on the thickness of the DNA layer decreased in the order (K+ > Na+ > Cs+ ∼ Li+). Rationalization of the experimental results requires that adsorption, due to cation specific charge screening, is driven by the simultaneous action of two mechanisms namely, the law of matching water affinities for kosmotropes (Li+) and ion dispersion forces for chaotropes (Cs+). The outcome of these two opposing mechanisms is a "bell-shaped" specific cations sequence. Moreover, a superimposed buffer specificity, which goes beyond the simple effect of pH regulation, further modulated cation specificity. In summary, DNA-lipid bilayer interactions are maximized if citrate buffer (50 mM, pH 7.4) and KCl (100 mM) are used.