Inverse Vulcanization of Activated Norbornenyl Esters - A Versatile Platform for Functional Sulfur Polymers.

Elemental sulfur has shown to be a promising alternative feedstock for development of novel polymeric materials with high sulfur content. However, the utilization of inverse vulcanized polymers is restricted by the limitation of functional comonomers suitable for an inverse vulcanization. Control over properties and structure of inverse vulcanized polymers still poses a challenge to current research due to the dynamic nature of sulfur-sulfur bonds and high temperature of inverse vulcanization reactions. In here, we report for the first time the inverse vulcanization of norbornenyl pentafluorophenyl ester (NB-PFPE), allowing for post-modification of inverse vulcanized polymers via amidation of reactive PFP esters to yield high sulfur content polymers under mild conditions. Amidation of the precursor material with three functional primary amines (α-amino-ω-methoxy polyethylene glycol, aminopropyl trimethoxy silane, allylamine) was investigated. The resulting materials were applicable as sulfur containing poly(ethylene glycol) nanoparticles in aqueous environment. Cross-linked mercury adsorbents, sulfur surface coatings, and high-sulfur content networks with predictable thermal properties were achievable using aminopropyl trimethoxy silane and allylamine for post-polymerization modification, respectively. With the broad range of different amines available and applicable for post-polymerization modification, the versatility of poly(sulfur-random-NB-PFPE) as a platform precursor polymer for novel specialized sulfur containing materials was showcased.

Triplet-Encoded Prebiotic RNA Aminoacylation.

The encoding step of translation involves attachment of amino acids to cognate tRNAs by aminoacyl-tRNA synthetases, themselves the product of coded peptide synthesis. So, the question arises─before these enzymes evolved, how were primordial tRNAs selectively aminoacylated? Here, we demonstrate enzyme-free, sequence-dependent, chemoselective aminoacylation of RNA. We investigated two potentially prebiotic routes to aminoacyl-tRNA acceptor stem-overhang mimics and analyzed those oligonucleotides undergoing the most efficient aminoacylation. Overhang sequences do not significantly influence the chemoselectivity of aminoacylation by either route. For aminoacyl-transfer from a mixed anhydride donor strand, the chemoselectivity and stereoselectivity of aminoacylation depend on the terminal three base pairs of the stem. The results support early suggestions of a second genetic code in the acceptor stem.

Strigo-D2-a bio-sensor for monitoring spatio-temporal strigolactone signaling patterns in intact plants.

Strigolactones (SLs) are a class of plant hormones that mediate biotic interactions and modulate developmental programs in response to endogenous and exogenous stimuli. However, a comprehensive view on the spatio-temporal pattern of SL signaling has not been established, and tools for a systematic in planta analysis do not exist. Here, we present Strigo-D2, a genetically encoded ratiometric SL signaling sensor that enables the examination of SL signaling distribution at cellular resolution and is capable of rapid response to altered SL levels in intact Arabidopsis (Arabidopsis thaliana) plants. By monitoring the abundance of a truncated and fluorescently labeled SUPPRESSOR OF MAX2 1-LIKE 6 (SMXL6) protein, a proteolytic target of the SL signaling machinery, we show that all cell types investigated have the capacity to respond to changes in SL levels but with very different dynamics. In particular, SL signaling is pronounced in vascular cells but low in guard cells and the meristematic region of the root. We also show that other hormones leave Strigo-D2 activity unchanged, indicating that initial SL signaling steps work in isolation from other hormonal signaling pathways. The specificity and spatio-temporal resolution of Strigo-D2 underline the value of the sensor for monitoring SL signaling in a broad range of biological contexts with highly instructive analytical depth.

Assessment of the bioaccumulation potential of four commonly used phenolic benzotriazoles based on in silico and experimental in vivo data.

Phenolic benzotriazoles (BTZs) are used globally as light stabilizers in various plastic products to protect them from photooxidative degradation. The same physical-chemical properties that confer their functionality, like a sufficient photostability and a high octanol-water partition coefficient, also raise concerns on their potential for environmental persistence and bioaccumulation based on in silico predictive tools. To evaluate their bioaccumulation potential in aquatic organisms, standardized fish bioaccumulation studies according to OECD TG 305 were conducted with four of the most commonly used BTZs: UV 234, UV 329, UV P, and UV 326. The resulting growth- and lipid-corrected BCF values revealed that UV 234, UV 329, and UV P were below the bioaccumulation threshold (BCF ≤ 2000), but UV 326 is considered very bioaccumulative (BCF ≥ 5000) with respect to the bioaccumulation criteria under REACH. Comparing these experimentally derived data with quantitative structure activity related or other calculated values using a logarithmic partitioning coefficient octanol-water (log Pow ) driven mathematical formula revealed significant discrepancies demonstrating the weakness of current in silico approaches for this group of substances. Furthermore, available environmental monitoring data demonstrate that these rudimentary in silico approaches can lead to unreliable bioaccumulation estimates for this chemical class due to considerable uncertainties in underlying assumptions (e.g., concentration and route of exposure). However, using more sophisticated in silico methods (i.e., CATALOGIC base-line model), the derived BCF values were better aligned with the experimentally derived ones.

3D assessment after maxillary sinus grafting with a porcine, a bovine and a synthetical bone substitute material. A randomized controlled clinical trial.

AIM: This randomized controlled clinical study focused on graft volume alterations after sinus floor augmentation with a deproteinized bovine bone mineral (DBBM, Geistlich Bio-Oss®), deproteinized porcine bone mineral (DPBM, THE GRAFT®) or a biphasic calcium phosphate (BCP, OSOPIA®). MATERIAL AND METHODS: 28 patients with edentulous situations in the posterior maxilla with less or equal to 5 mm of residual bone height received a two- staged external sinus grafting procedure with DBBM, DPBM or BCP. CBCT scans were performed prior surgery (CBCT1), directly after surgery (CBCT2) and after a healing period of 4-6 months prior implant placement (CBCT3). CBCT scans were used to analyze volumetric alterations of the sinus grafts by virtual 3D model matching of CBCT1- CBCT2 (situation after sinus grafting) and CBCT1 and CBCT2 (situation prior implant placement). RESULTS: The volume of the bone graft in the maxillary sinus (volume (VOL%) directly after grafting rated as 100%) was stable after the healing period in the DBBM (VOL%: 103±4%) and the PBBM groups (VOL%: 112± 23) with no statistically significant differences concerning 3D measurements. In the BCP group, the grafted volume declined to 66± 25% (VOL%), statistically inferior to the DBBM and DPBM groups. CONCLUSION: Concerning bone graft stability/ 25 volume DBBM and DPBM show comparable outcomes. Due to resorption, BCP showed inferior bone graft volume after healing (statistically significant) compared to DBBM and DPBM.

Investigation of the palatal soft tissue volume: a 3D virtual analysis for digital workflows and presurgical planning.

BACKGROUND: In mucogingival and implant surgery, an autologous soft tissue graft from the palate is the gold standard for reconstructing missing keratinised soft tissue and volume. Previously, presurgical measurements of the graft harvesting site were described with two-dimensional (2D) linear measurements. The present observational clinical study aimed to evaluate a three-dimensional (3D) measurement method for determining the present palatal soft tissue volume for each patient individually. METHODS: Pre-existing cone beam computed tomography (CBCT) scans of 20 patients were converted into 3D Standard Tessellation Language models of the bone surface. Intraoral impressions of the maxilla were taken and digitised to visualise the gingival surface. The resulting virtual models of bone (reference value) and gingival (actual value) surfaces were merged, with tooth surfaces used for registration. The region between the central incisors and the hard palate was subdivided into 5 regions of interest (ROIs). The distance between palatal bone and gingival surface was analysed both volumetrically and linearly, and the results were statistically evaluated for the ROIs. RESULTS: The average gingival surface area on the palate was 19.1 cm2, and the mean volume was 58.2 cm3 (± 16.89). Among the ROIs, the mean linear value was highest in the most distal region, from the second molar to the hard palate (4.0 ± 1.09 mm) and lowest in the canine region (1.9 ± 0.63 mm). For mean distance, significant differences were found for the anterior palate and the most posterior palate in comparison with all other ROIs (p < 0.01). The volume measurements also declined significantly and steadily between the posterior (1.9 ± 1.0 cm3) and anterior palates (0.4 ± 0.2 cm3). CONCLUSIONS: By merging digital data, palatal soft tissue could be quantified virtually. The results were reliable and comparable to previous findings with linear measurement methods. This 3D soft tissue volume analysis method fully exploited the diagnostic potential of data that are frequently collected for presurgical planning in oral surgery (i.e., CBCT + surface scans). This evaluation method might be useful for volumetric and linear measurements in other applications in anatomy and for determining palatal soft tissue dimensions in the planning stage before surgical interventions. TRIAL REGISTRATION: This observational clinical trial was retrospectively registered in the German Clinical Trials Register, reference number: DRKS00023918.

Volumetric soft tissue alterations in the early healing phase after peri- implant soft tissue contour augmentation with a porcine collagen matrix versus the autologous connective tissue graft: A controlled clinical trial.

AIM: This study evaluates the early volumetric changes after buccal soft tissue contour augmentation around implants with a porcine collagen matrix (CM) vs. the subepithelial connective tissue graft (SCTG) from the palate. MATERIALS AND METHODS: 14 patients were enrolled after early implant placement with simultaneous contour augmentation and persistent buccal tissue deficits. At implant exposure, buccal soft tissues were thickened with the CM (n = 7) or the SCTG (n = 7). Impressions were taken before and after surgery, after ten days, one, three and six months. Impressions were digitized and augmented regions 3D evaluated (soft tissue volume (mm3 , %)/thickness (mm)). RESULTS: Volume increase (mm3 ) after 6 months was 19.56 ± 8.95 mm3 (CM) and 61.75 ± 52.69 mm3 (SCTG) (insignificant, p = .058). In percentage, this was a volume loss of the initially augmented soft tissue volume (100%) of 81.76% in the CM group and 56.39% in the SCTG group (6 months). The mean soft tissue thickness increase (mm) in the buccal contour after 6 months was 0.30 ± 0.16 mm (CM) and 0.80 ± 0.61 mm (SCTG) (insignificant, p = .071). CONCLUSION: The early healing phase is associated with a significant volume loss of the soft tissues. The SCTG shows insignificant superiority compared to the CM.

Free Gingival Graft and Collagen Matrix Revascularization in an Enoral Open Wound Situation.

PURPOSE: Vestibuloplasty with free gingival grafting is a frequently performed surgical procedure to generate sufficient keratinized mucosa (KM) around dental implants. Avascular porcine collagen matrices (CM) have been proclaimed to be sufficient substitutes as alternatives to free gingival grafts (FGGs). However, the process of graft integration and vascularization is still incompletely understood. METHODS: In 18 patients a vestibuloplasty in the lower edentulous jaw situation was performed during implant exposure, either with FGGs from the palate or a porcine CM (mucoderm). Tissue perfusion of the soft tissue grafts was measured using laser-doppler-spectrophotometer intraoperatively and on postoperative days 2, 5, 10, 30 and between days 60 and 90. With graft perfusion expressed by oxygen saturation [SO2%], the relative amount of hemoglobin [rHb], blood flow, and velocity [AU] was detected and compared between groups and the surrounding mucosa. RESULTS: Healing was uneventful in both groups, with mature KM around dental implants after healing. Blood flow and velocity significantly increased until postoperative day 10, comparable to perfusion values of the surrounded mucosa. Intergroup comparisons revelated no significant differences concerning the flow between CM and FGGs. Oxygen saturation also significantly increased within the first 5 postoperative days in both groups. Hemoglobin content did not show any differences during the investigated period. CONCLUSIONS: The perfusion mainly progresses within the first postoperative week with only minimal further detectable alterations until the final investigation, comparable in both groups. Although integration of FGGs (revascularized) and the CM (new tissue formation) is biologically different, both transplants show comparable perfusion patterns, leading to sufficient KM.

Sox9 overexpression exerts multiple stage-dependent effects on mouse spinal cord development.

The high-mobility-group (HMG)-domain protein Sox9 is one of few transcription factors implicated in gliogenesis in the vertebrate central nervous system. To further study the role of Sox9 in early spinal cord development, we generated a mouse that allows expression of Sox9 in a temporally and spatially controlled manner. Using this mouse, we show that premature Sox9 expression in neural precursor cells disrupted the neuroepithelium of the ventricular zone. Sox9 also compromised development and survival of neuronal precursors and neurons. Additionally, we observed in these mice substantial increases in oligodendroglial and astroglial cells. Reversing the normal order of appearance of essential transcriptional regulators during oligodendrogenesis, Sox10 preceded Olig2. Our study reinforces the notion that Sox9 has a strong gliogenic activity. It also argues that Sox9 expression has to be tightly controlled to prevent negative effects on early spinal cord structure and neuronal development.

All Eyes on Visible-Light Peroxyoxalate Chemiluminescence Read-Out Systems.

Chemiluminescence (CL) reactions have been widely employed and explored over the past 50 years because they offer unique light emission upon a defined chemical stimulus. In this Minireview, we focus on peroxyoxalate (PO) compounds because they feature very high quantum yields tuneable over the entire visible spectrum, allowing for visible-light detection by the naked eye without the necessity for expensive analytical instruments. Although analytical methods have been extensively described, PO-CL read-out is a strongly emerging field with ample industrial potential. The state-of-the-art PO-CL detection read-out systems for various key analytes is here explored. In particular, structural requirements, recent developments of PO-CL read-out probes and current limitations of selected examples are detailed. Furthermore, innovative approaches and synthetic routes to push the boundaries of PO-CL reactions into biological systems are highlighted. Underpinned by recent contributions, we share perspectives on embedding PO-CL molecules into polymeric materials, which they consider the next step in designing high performance solid-phase read-out systems.

Correction to: Osseous ingrowth in allogeneic bone blocks applied for vertical bone augmentation: a preclinical randomized controlled study.

In the article by Möst et al., entitled "Osseous ingrowth in allogeneic bone blocks applied for vertical bone augmentation: a preclinical randomized controlled study.

Osseous ingrowth in allogeneic bone blocks applied for vertical bone augmentation: a preclinical randomised controlled study.

OBJECTIVES: The aim of the present study was the qualitative and quantitative evaluation of osseous graft consolidation using allogeneic bone blocks for vertical bone augmentation in an animal model. MATERIAL AND METHODS: Standardised allogeneic and autologous bone blocks were fixed on the frontal skull of 20 adult female pigs and covered with a resorbable collagen membrane. Animals were sacrificed after 2 and 6 months. Specimens were histologically and histomorphometrically analysed focusing on the amount of vital bone, residual bone substitute material and connective tissue. Furthermore, the amount of expression of bone matrix proteins (collagen type I and osteocalcin) and de novo vessel formation (von Willebrand factor) were quantified by immunohistochemistry. RESULTS: Significantly more allogeneic bone blocks failed for both evaluation time points (p < 0.05). Allogeneic blocks showed significantly less vital bone with more connective tissue formation compared to autologous bone blocks. Increased vessel formation could be detected for both evaluation time points in the contact area of autologous bone with local bone. The expression of collagen type I and osteocalcin was significantly lower in the allogeneic bone graft. CONCLUSIONS: Allogeneic cancellous bone blocks showed a significantly higher failure rate compared to autologous bone blocks. Allogeneic bone blocks seemed to negatively affect bone formation or negatively influence the host in the long term, and increased connective tissue formation and block loss should be anticipated. CLINICAL RELEVANCE: In order to maintain patient safety and treatment success clinicians should be persuaded to make a conscious choice of the applied biomaterials with regard to their components and structure.

Retrospective 3D analysis of bone regeneration after cystectomy of odontogenic cysts.

BACKGROUND/OBJECTIVE: In this retrospective study, we aimed to investigate a new 3D evaluation method for evaluating bone regeneration after cystectomy of odontogenic cysts. METHODS: The study included 26 patients who underwent cystectomies between 2012 and 2017 and had received either fillings or non-fillings with autologous iliac crest. Bony regeneration was analyzed using 3D imaging software and comparing identical regions of interest (ROIs) that were determined by exact overlays of the postoperative cone beam computer tomography (CBCT) or computer tomography (CT) images. Outcome measures, including volume changes according to the defect size and configuration, patient age, the entity and distribution of the cysts, were collected. RESULTS: Twenty-six patients (5 women and 21 men) had 30 defects, including nine keratocysts, seven radicular cysts and 14 dentigerous cysts. A total of 73% of the defects were in the mandible. The mean 3D follow-up time was 12 months. According to the 3D evaluation of bony regeneration, the defect size and configuration showed no significant differences between the groups (filled or non-filled with 15 defects per group). CONCLUSIONS: By establishing a standardized 3D method for evaluating bone regeneration, healing can be better monitored and evaluated.

A Photochemical Ligation System Enabling Solid-Phase Chemiluminescence Read-Out.

The peroxyoxalate chemiluminescence (PO-CL) reaction is among the most powerful and versatile techniques for the detection of hydrogen peroxide (H2 O2 ) and has been employed in various biological and chemical applications over the past 50 years. However, its two-component nature (peroxyoxalate and fluorophore) limits its use. This contribution introduces an innovative and versatile photochemical platform technology for the synthesis of inherently fluorescent PO probes by exploiting the nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) reaction. In the presence of hydrogen peroxide, the pioneered "2-in-1" molecule emits either yellow or blue light, depending on tetrazole (Tz) structure. Even in the absence of base, the emitted light remains visible and H2 O2 could be detected in the nanomolar range. Critically, the PO-Tz can be readily incorporated into polymeric materials. As a first application of this promising material, a tailor-made PO-Tz is grafted on poly(divinylbenzene) (PDVB) particles to enable solid-phase chemiluminescence on microspheres.

Gingiva thickening with a porcine collagen matrix in a preclinical dog model: Histological outcomes.

AIM: To compare 10-month histological and immunohistological outcomes after soft tissue thickening around teeth with a porcine collagen matrix (CM) versus a subepithelial connective tissue graft (SCTG). MATERIAL AND METHODS: In eight beagle dogs, soft tissue thickening of the buccal gingiva of upper canines was performed with the SCTG or the CM. Connective tissue thickness (CTT) was histomorphometrically measured in the augmented regions. The augmented connective tissues were also histologically characterized and the collagen I and vascular endothelial growth factor (VEGF) expressions immunohistologically quantified. RESULTS: CTT significantly differed between groups (SCTG: 1.32 mm ± 0.44 mm; CM: 1.06 mm ± 0.27 mm; p = .008). Descriptive histological analyses revealed mature connective tissue that did not differ between groups. Immunohistological quantification of collagen I and VEGF expressions in the connective tissue also revealed no significant inter-group differences (collagen I: SCTG, 32.64% ± 7.09% vs. CM, 30.57% ± 7.83%; VEGF: SCTG, 39.06% ± 7.27% vs. CM, 37.15% ± 9.80%). CONCLUSION: SCTG is superior to CM with regard to CTT in this experimental model. The CM and the SCTG lead to comparable connective tissue quality ten months after connective tissue thickening.

Collagen Matrix Vascularization in a Peri-Implant Vestibuloplasty Situation Proceeds Within the First Postoperative Week.

PURPOSE: Vestibuloplasty is a frequently performed surgical procedure to create or increase soft tissue mucosal sealing around dental restorations. Collagen matrices have exhibited comparable clinical results as free gingival grafts in the context of intraoral tissue augmentation. However, the process of matrix vascularization, the basic requirement for local healing, is incompletely understood. Therefore, this study investigated collagen matrix perfusion in a clinical intraoral setting. MATERIALS AND METHODS: In a prospective cohort study, vestibuloplasty was performed during implant exposure using prefabricated collagen matrices. Matric perfusion was determined intraoperatively and at days 2, 5, 7, 14, 30, and 90 using a laser Doppler spectrophotometer measuring oxygen saturation, relative amount of hemoglobin, blood flow, and blood velocity as primary outcome variables. These parameters were compared with perfusion of the oral mucosa surrounding the matrices. Statistical analysis was performed by applying variance and regression models. RESULTS: In 10 patients (average age, 60.9 yr), vestibuloplasty was performed exclusively in the anterior mandible. Blood flow and tissue oxygen saturation in the augmented zones markedly increased until postoperative day 5 and approximated perfusion values of the adjacent mucosa at the following 2 time points. Likewise, matrix oxygen saturation markedly increased until day 7 and subsequently converged to perfusion parameters of the surrounding mucosa at the following time points. CONCLUSION: Flow signals in incorporated collagen matrices occurred on day 2 after vestibuloplasty and further increased until days 5 to 7. Therefore, matrix perfusion mainly occurs within the first postoperative week, converging to perfusion levels of the surrounding mucosa with minimal alterations during the following course.

Evaluation of Staff Satisfaction After Implementation of a Surgical Safety Checklist in the Ambulatory of an Oral and Maxillofacial Surgery Department and its Impact on Patient Safety.

PURPOSE: Safety checklists in medicine have been shown to be effective in the prevention of complications and adverse events in patients undergoing surgery. Such checklists are not as common in dentistry. The aims of this study were to propose a safety checklist for the ambulatory treatment of patients undergoing oral and implant surgery and to assess its impact on patient safety and staff satisfaction. MATERIALS AND METHODS: After implementation of a surgical safety checklist in the ambulatory treatment of patients undergoing oral and implant surgeries, a questionnaire regarding staff satisfaction and safety-related parameters was randomly administered. Incidents, complications, and adverse events were documented. Outcomes with (n = 40 surgeries) and without (n = 40 surgeries) use of the checklist were analyzed and compared. RESULTS: Staff reported high satisfaction with the use of the checklist, which demonstrably improved team communication and lowered stress levels during surgery. There was a statistically significantly higher frequency of reported incidents without the use of the checklist (n = 43) than with the use of the checklist (n = 10; P = .000). Most incidents were reported in the context of pre- and post-procedural processes. CONCLUSIONS: Safety checklists help to improve work processes, optimize communication, and lower stress levels. Their use in clinical dental practice is recommended.

Elevated in vivo levels of a single transcription factor directly convert satellite glia into oligodendrocyte-like cells.

Oligodendrocytes are the myelinating glia of the central nervous system and ensure rapid saltatory conduction. Shortage or loss of these cells leads to severe malfunctions as observed in human leukodystrophies and multiple sclerosis, and their replenishment by reprogramming or cell conversion strategies is an important research aim. Using a transgenic approach we increased levels of the transcription factor Sox10 throughout the mouse embryo and thereby prompted Fabp7-positive glial cells in dorsal root ganglia of the peripheral nervous system to convert into cells with oligodendrocyte characteristics including myelin gene expression. These rarely studied and poorly characterized satellite glia did not go through a classic oligodendrocyte precursor cell stage. Instead, Sox10 directly induced key elements of the regulatory network of differentiating oligodendrocytes, including Olig2, Olig1, Nkx2.2 and Myrf. An upstream enhancer mediated the direct induction of the Olig2 gene. Unlike Sox10, Olig2 was not capable of generating oligodendrocyte-like cells in dorsal root ganglia. Our findings provide proof-of-concept that Sox10 can convert conducive cells into oligodendrocyte-like cells in vivo and delineates options for future therapeutic strategies.

Transcription factor Sox10 regulates oligodendroglial Sox9 levels via microRNAs.

During development of myelin-forming oligodendrocytes in the central nervous system the two closely related transcription factors Sox9 and Sox10 play essential roles that are partly shared and partly unique. Whereas Sox9 primarily functions during oligodendroglial specification, Sox10 is uniquely required to induce terminal differentiation and myelination. During this process, Sox10 protein levels rise substantially. As this coincides with a reciprocal decrease in Sox9, we postulated that Sox10 influences Sox9 amounts in differentiating oligodendrocytes. Here we show that Sox9 levels are indeed inversely coupled to Sox10 levels such that Sox10 deletion in oligodendroglial cells evokes a reciprocal increase in Sox9. We furthermore provide evidence that this coupling involves upregulation of microRNAs miR335 and miR338 as direct transcriptional targets of Sox10. The two microRNAs in turn recognize the 3'-UTR of Sox9 mRNA and may thereby reduce Sox9 protein levels posttranscriptionally in oligodendroglial cells. Such a mechanism may enable oligodendroglial cells to adapt the ratio of both related Sox proteins in a manner required for successful lineage progression and differentiation. Mathematical modeling furthermore shows that the identified regulatory circuit has the potential to convert a transient stimulus into an irreversible switch of cellular properties and may thus contribute to terminal differentiation of oligodendrocytes.

Morphology and ultrastructure of the tarsal adhesive organs of the Madagascar hissing cockroach Gromphadorhina portentosa.

The present transmission and scanning electron microscopic study of the ultramorphology of the pliable attachment pads (arolium, euplantulae) of the Madagascar hissing cockroach Gromphadorhina portentosa reveals structural evidence for their function in producing, storing, and secreting an adhesion-mediating secretion and releasing it to the exterior. The exocrine epidermal tissue of both the arolium and the euplantula is significantly enlarged by numerous invaginations stretching into the hemolymph cavity. Its cells show large nuclei, numerous mitochondria, Golgi complexes, and a prominent rough-surfaced endoplasmic reticulum integrated within an electron-dense cytoplasm that contains numerous vesicles of diverse electron density and size. Invaginations of the cell membrane provide evidence for strong membrane turnover. The glandular epithelium of both the arolium and the euplantula releases the adhesion-mediating secretion into a subcuticular void from which it has to permeate the thick cuticle of the adhesive pads. The subcuticular void is compartmentalized by cuticle bands through which the adhesion-mediating secretion permeates via small canals. The secretion subsequently enters a larger storage reservoir before being received by a prominent sponge-like cuticle. The structural differences between the arolium and the euplantula consist of the number and length of the interdigitations spanning the hemolymph cavity, of the subdivision of the subcuticular reservoir by cuticle bands, and of the thickness of the sponge-like cuticle. The structural results are discussed with respect to the production of a chemically complex (emulsion-like) adhesive, its controlled release to the exterior, and the micromechanical properties of the cuticle of the pliable pad.