RESUMEN
Earth system and environmental impact studies need high quality and up-to-date estimates of atmospheric deposition. This study demonstrates the methodological benefits of multimodel ensemble and measurement-model fusion mapping approaches for atmospheric deposition focusing on 2010, a year for which several studies were conducted. Global model-only deposition assessment can be further improved by integrating new model-measurement techniques, including expanded capabilities of satellite observations of atmospheric composition. We identify research and implementation priorities for timely estimates of deposition globally as implemented by the World Meteorological Organization.
Asunto(s)
Contaminantes Atmosféricos , Ozono , Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Nitrógeno/análisis , Ozono/análisis , AzufreRESUMEN
In Latin America, atmospheric deposition is a major vector of nitrogen (N) input to urban systems. Yet, measurements of N deposition are sparse, precluding analysis of spatial patterns, temporal trends, and ecosystem impacts. Chemical transport models can be used to fill these gaps in the absence of dense measurements. Here, we evaluate the performance of a global 3-D chemical transport model in simulating spatial and interannual variation in wet inorganic N (NH4-N + NO3-N) deposition across urban areas in Latin America. Monthly wet and dry inorganic N deposition to Latin America were simulated for the period 2006-2010 using the GEOS-Chem Chemical Transport Model. Published estimates of observed wet or bulk inorganic N deposition measured between 2006-2010 were compiled for 16 urban areas and then compared with model output from GEOS-Chem. Observed mean annual inorganic N deposition to the urban study sites ranged from 5.7-14.2 kg ha-1 yr-1, with NH4-N comprising 48-90% of the total. Results show that simulated N deposition was highly correlated with observed N deposition across sites (R2 = 0.83, NMB = -50%). However, GEOS-Chem generally underestimated N deposition to urban areas in Latin America compared to observations. Underestimation due to bulk sampler dry deposition artifacts was considered and improved bias without improving correlation. In contrast to spatial variation, the model did not capture year-to-year variation well. Discrepancies between modeled and observed values exist, in part, because of uncertainties in Latin American N emissions inventories. Our findings indicate that even at coarse spatial resolution, GEOS-Chem can be used to simulate N deposition to urban Latin America, improving understanding of regional deposition patterns and potential ecological effects.
RESUMEN
Dry deposition of ozone is an important sink of ozone in near surface air. When dry deposition occurs through plant stomata, ozone can injure the plant, altering water and carbon cycling and reducing crop yields. Quantifying both stomatal and nonstomatal uptake accurately is relevant for understanding ozone's impact on human health as an air pollutant and on climate as a potent short-lived greenhouse gas and primary control on the removal of several reactive greenhouse gases and air pollutants. Robust ozone dry deposition estimates require knowledge of the relative importance of individual deposition pathways, but spatiotemporal variability in nonstomatal deposition is poorly understood. Here we integrate understanding of ozone deposition processes by synthesizing research from fields such as atmospheric chemistry, ecology, and meteorology. We critically review methods for measurements and modeling, highlighting the empiricism that underpins modeling and thus the interpretation of observations. Our unprecedented synthesis of knowledge on deposition pathways, particularly soil and leaf cuticles, reveals process understanding not yet included in widely-used models. If coordinated with short-term field intensives, laboratory studies, and mechanistic modeling, measurements from a few long-term sites would bridge the molecular to ecosystem scales necessary to establish the relative importance of individual deposition pathways and the extent to which they vary in space and time. Our recommended approaches seek to close knowledge gaps that currently limit quantifying the impact of ozone dry deposition on air quality, ecosystems, and climate.
RESUMEN
Rapid development of agriculture and fossil fuel combustion greatly increased US reactive nitrogen emissions to the atmosphere in the second half of the 20th century, resulting in excess nitrogen deposition to natural ecosystems. Recent efforts to lower nitrogen oxides emissions have substantially decreased nitrate wet deposition. Levels of wet ammonium deposition, by contrast, have increased in many regions. Together these changes have altered the balance between oxidized and reduced nitrogen deposition. Across most of the United States, wet deposition has transitioned from being nitrate-dominated in the 1980s to ammonium-dominated in recent years. Ammonia has historically not been routinely measured because there are no specific regulatory requirements for its measurement. Recent expansion in ammonia observations, however, along with ongoing measurements of nitric acid and fine particle ammonium and nitrate, permit new insight into the balance of oxidized and reduced nitrogen in the total (wet + dry) US nitrogen deposition budget. Observations from 37 sites reveal that reduced nitrogen contributes, on average, â¼65% of the total inorganic nitrogen deposition budget. Dry deposition of ammonia plays an especially key role in nitrogen deposition, contributing from 19% to 65% in different regions. Future progress toward reducing US nitrogen deposition will be increasingly difficult without a reduction in ammonia emissions.
Asunto(s)
Amoníaco/análisis , Contaminantes Ambientales/análisis , Nitratos/análisis , Ácido Nítrico/análisis , Óxidos de Nitrógeno/análisis , Nitrógeno/análisis , Agricultura/tendencias , Amoníaco/química , Atmósfera/química , Conservación de los Recursos Naturales , Ecosistema , Monitoreo del Ambiente , Contaminantes Ambientales/química , Humanos , Nitratos/química , Ácido Nítrico/química , Nitrógeno/química , Óxidos de Nitrógeno/química , Oxidación-Reducción , Estados Unidos , Emisiones de Vehículos/análisisRESUMEN
The air quality of many large coastal areas in the United States is affected by the confluence of polluted urban and relatively clean marine airmasses, each with distinct atmospheric chemistry. In this context, the role of iodide-mediated ozone (O3) deposition over seawater and marine halogen chemistry accounted for in both the lateral boundary conditions and coastal waters surrounding the continental U.S. is examined using the Community Multiscale Air Quality (CMAQ) model. Several nested simulations are conducted in which these halogen processes are implemented separately in the continental U.S. and hemispheric CMAQ domains, the latter providing lateral boundary conditions for the former. Overall, it is the combination of these processes within both the continental U.S. domain and from lateral boundary conditions that lead to the largest reductions in modeled surface O3 concentrations. Predicted reductions in surface O3 concentrations occur mainly along the coast where CMAQ typically has large overpredictions. These results suggest that a realistic representation of halogen processes in marine regions can improve model prediction of O3 concentrations near the coast.
Asunto(s)
Yoduros , Ozono , Contaminantes Atmosféricos , Monitoreo del Ambiente , Halógenos , Modelos Teóricos , Estados UnidosRESUMEN
Fate of ozone in marine environments has been receiving increased attention due to the tightening of ambient air quality standards. The role of deposition and halogen chemistry is examined through incorporation of an enhanced ozone deposition algorithm and inclusion of halogen chemistry in a comprehensive atmospheric modeling system. The enhanced ozone deposition treatment accounts for the interaction of iodide in seawater with ozone and increases deposition velocities by 1 order of magnitude. Halogen chemistry includes detailed chemical reactions of organic and inorganic bromine and iodine species. Two different simulations are completed with the halogen chemistry: without and with photochemical reactions of higher iodine oxides. Enhanced deposition reduces mean summer-time surface ozone by â¼3% over marine regions in the Northern Hemisphere. Halogen chemistry without the photochemical reactions of higher iodine oxides reduces surface ozone by â¼15% whereas simulations with the photochemical reactions of higher iodine oxides indicate ozone reductions of â¼48%. The model without these processes overpredicts ozone compared to observations whereas the inclusion of these processes improves predictions. The inclusion of photochemical reactions for higher iodine oxides leads to ozone predictions that are lower than observations, underscoring the need for further refinement of the halogen emissions and chemistry scheme in the model.
Asunto(s)
Atmósfera/química , Halógenos/química , Ozono/análisis , Contaminantes Atmosféricos/análisis , Cinética , Modelos Teóricos , Estaciones del Año , Factores de TiempoRESUMEN
Organic nitrates are an important aerosol constituent in locations where biogenic hydrocarbon emissions mix with anthropogenic NOx sources. While regional and global chemical transport models may include a representation of organic aerosol from monoterpene reactions with nitrate radicals (the primary source of particle-phase organic nitrates in the Southeast United States), secondary organic aerosol (SOA) models can underestimate yields. Furthermore, SOA parametrizations do not explicitly take into account organic nitrate compounds produced in the gas phase. In this work, we developed a coupled gas and aerosol system to describe the formation and subsequent aerosol-phase partitioning of organic nitrates from isoprene and monoterpenes with a focus on the Southeast United States. The concentrations of organic aerosol and gas-phase organic nitrates were improved when particulate organic nitrates were assumed to undergo rapid (τ = 3 h) pseudohydrolysis resulting in nitric acid and nonvolatile secondary organic aerosol. In addition, up to 60% of less oxidized-oxygenated organic aerosol (LO-OOA) could be accounted for via organic nitrate mediated chemistry during the Southern Oxidants and Aerosol Study (SOAS). A 25% reduction in nitrogen oxide (NO + NO2) emissions was predicted to cause a 9% reduction in organic aerosol for June 2013 SOAS conditions at Centreville, Alabama.
Asunto(s)
Aerosoles/análisis , Aerosoles/química , Contaminantes Atmosféricos/análisis , Nitratos/análisis , Alabama , Butadienos/química , Hemiterpenos/química , Modelos Químicos , Modelos Teóricos , Monoterpenos/química , Nitratos/química , Óxidos de Nitrógeno/análisis , Óxidos de Nitrógeno/química , Pentanos/química , Sudeste de Estados UnidosRESUMEN
UNLABELLED: The US. Environmental Protection Agency (EPA) has developed the Watershed Deposition Tool (WDT) to calculate from the Community Multiscale Air Quality (CMAQ) model output the nitrogen, sulfur and mercury deposition rates to watersheds and their sub-basins. The CMAQ model simulates from first principles the transport, transformation, and removal of atmospheric pollutants. We applied WDT to estimate the atmospheric deposition of reactive nitrogen (N) to Tampa Bay and its watershed. For 2002 and within the boundaries of Tampa Bay's watershed, modeled atmospheric deposition rates averaged 13.3 kg N ha(-1) yr(-1) and ranged from 6.24 kg N ha(-1) yr(-1) at the bay's boundary with Gulf of Mexico to 21.4 kg N ha(-1) yr(-1) near Tampa's urban core, based on a 12-km x 12-km grid cell size. CMAQ-predicted loading rates were 1,080 metric tons N yr(-1) to Tampa Bay and 8,280 metric tons N yr(-1) to the land portion of its watershed. If we assume a watershed-to-bay transfer rate of 18% for indirect loading, our estimates of the 2002 direct and indirect loading rates to Tampa Bay were 1,080 metric tons N and 1,490 metric tons N, respectively, for an atmospheric loading of 2,570 metric tons N or 71% of the total N loading to Tampa Bay. To evaluate the potential impact of the US. EPA Clean Air Interstate Rule (CAIR, replaced with Cross-State Air Pollution Rule), Tier 2 Vehicle and Gasoline Sulfur Rules, Heavy Duty Highway Rule, and Non-Road Diesel Rule, we compared CMAQ outputs between 2020 and 2002 simulations, with only the emissions inventories changed. The CMAQ-projected change in atmospheric loading rates between these emissions inventories was 857 metric tons N to Tampa Bay, or about 24% of the 2002 loading of 3,640 metric tons N to Tampa Bay from all sources. IMPLICATIONS: Air quality modeling reveals that atmospheric deposition of reactive nitrogen (N) contributes a significant fraction to Tampa Bay's total N loading from external sources. Regulatory drivers that lower nitrogen oxide emissions from power plants and motor vehicles are important to bay management strategies, which seek to improve water quality through N load reduction.
Asunto(s)
Contaminantes Atmosféricos/análisis , Modelos Teóricos , Nitrógeno/análisis , Contaminación del Agua/análisis , Abastecimiento de Agua , FloridaRESUMEN
The fourth phase of the Air Quality Model Evaluation International Initiative (AQMEII4) is conducting a diagnostic intercomparison and evaluation of deposition simulated by regional-scale air quality models over North America and Europe. In this study, we analyze annual AQMEII4 simulations performed with the Community Multiscale Air Quality Model (CMAQ) version 5.3.1 over North America. These simulations were configured with both the M3Dry and Surface Tiled Aerosol and Gas Exchange (STAGE) dry deposition schemes available in CMAQ. A comparison of observed and modeled concentrations and wet deposition fluxes shows that the AQMEII4 CMAQ simulations perform similarly to other contemporary regional-scale modeling studies. During summer, M3Dry has higher ozone (O3) deposition velocities (Vd) and lower mixing ratios than STAGE for much of the eastern U.S. while the reverse is the case over eastern Canada and along the West Coast. In contrast, during winter STAGE has higher O3 Vd and lower mixing ratios than M3Dry over most of the southern half of the modeling domain while the reverse is the case for much of the northern U.S. and southern Canada. Analysis of the diagnostic variables defined for the AQMEII4 project, i.e. grid-scale and land-use (LU) specific effective conductances and deposition fluxes for the major dry deposition pathways, reveals generally higher summertime stomatal and wintertime cuticular grid-scale effective conductances for M3Dry and generally higher soil grid-scale effective conductances (for both vegetated and bare soil) for STAGE in both summer and winter. On a domain-wide basis, the stomatal grid-scale effective conductances account for about half of the total O3 Vd during daytime hours in summer for both schemes. Employing LU-specific diagnostics, results show that daytime Vd varies by a factor of 2 between LU categories. Furthermore, M3Dry vs. STAGE differences are most pronounced for the stomatal and vegetated soil pathway for the forest LU categories, with M3Dry estimating larger effective conductances for the stomatal pathway and STAGE estimating larger effective conductances for the vegetated soil pathway for these LU categories. Annual domain total O3 deposition fluxes differ only slightly between M3Dry (74.4 Tg/year) and STAGE (76.2 Tg/yr), but pathway-specific fluxes to individual LU types can vary more substantially on both annual and seasonal scales which would affect estimates of O3 damages to sensitive vegetation. A comparison of two simulations differing only in their LU classification scheme shows that the differences in LU cause seasonal mean O3 mixing ratio differences on the order of 1 ppb across large portions of the domain, with the differences generally largest during summer and in areas characterized by the largest differences in the fractional coverages of the forest, planted/cultivated, and grassland LU categories. These differences are generally smaller than the M3Dry vs. STAGE differences outside the summer season but have a similar magnitude during summer. Results indicate that the deposition impacts of LU differences are caused both by differences in the fractional coverages and spatial distributions of different LU categories as well as the characterization of these categories through variables like surface roughness and vegetation fraction in look-up tables used in the land-surface model and deposition schemes. Overall, the analyses and results presented in this study illustrate how the diagnostic grid-scale and LU-specific dry deposition variables adopted for AQMEII4 can provide insights into similarities and differences between the CMAQ M3Dry and STAGE dry deposition schemes that affect simulated pollutant budgets and ecosystem impacts from atmospheric pollution.
RESUMEN
The United States Environmental Protection Agency (US EPA) has developed a set of annual North American emissions data for multiple air pollutants across 18 broad source categories for 2002 through 2017. The sixteen new annual emissions inventories were developed using consistent input data and methods across all years. When a consistent method or tool was not available for a source category, emissions were estimated by scaling data from the EPA's 2017 National Emissions Inventory with scaling factors based on activity data and/or emissions control information. The emissions datasets are designed to support regional air quality modeling for a wide variety of human health and ecological applications. The data were developed to support simulations of the EPA's Community Multiscale Air Quality model but can also be used by other regional scale air quality models. The emissions data are one component of EPA's Air Quality Time Series Project which also includes air quality modeling inputs (meteorology, initial conditions, boundary conditions) and outputs (e.g., ozone, PM2.5 and constituent species, wet and dry deposition) for the Conterminous US at a 12 km horizontal grid spacing.
RESUMEN
A primary sink of air pollutants and their precursors is dry deposition. Dry deposition estimates differ across chemical transport models, yet an understanding of the model spread is incomplete. Here, we introduce Activity 2 of the Air Quality Model Evaluation International Initiative Phase 4 (AQMEII4). We examine 18 dry deposition schemes from regional and global chemical transport models as well as standalone models used for impact assessments or process understanding. We configure the schemes as single-point models at eight Northern Hemisphere locations with observed ozone fluxes. Single-point models are driven by a common set of site-specific meteorological and environmental conditions. Five of eight sites have at least 3 years and up to 12 years of ozone fluxes. The interquartile range across models in multiyear mean ozone deposition velocities ranges from a factor of 1.2 to 1.9 annually across sites and tends to be highest during winter compared with summer. No model is within 50 % of observed multiyear averages across all sites and seasons, but some models perform well for some sites and seasons. For the first time, we demonstrate how contributions from depositional pathways vary across models. Models can disagree with respect to relative contributions from the pathways, even when they predict similar deposition velocities, or agree with respect to the relative contributions but predict different deposition velocities. Both stomatal and nonstomatal uptake contribute to the large model spread across sites. Our findings are the beginning of results from AQMEII4 Activity 2, which brings scientists who model air quality and dry deposition together with scientists who measure ozone fluxes to evaluate and improve dry deposition schemes in the chemical transport models used for research, planning, and regulatory purposes.
RESUMEN
We present in this technical note the research protocol for phase 4 of the Air Quality Model Evaluation International Initiative (AQMEII4). This research initiative is divided into two activities, collectively having three goals: (i) to define the current state of the science with respect to representations of wet and especially dry deposition in regional models, (ii) to quantify the extent to which different dry deposition parameterizations influence retrospective air pollutant concentration and flux predictions, and (iii) to identify, through the use of a common set of detailed diagnostics, sensitivity simulations, model evaluation, and reduction of input uncertainty, the specific causes for the current range of these predictions. Activity 1 is dedicated to the diagnostic evaluation of wet and dry deposition processes in regional air quality models (described in this paper), and Activity 2 to the evaluation of dry deposition point models against ozone flux measurements at multiple towers with multiyear observations (to be described in future submissions as part of the special issue on AQMEII4). The scope of this paper is to present the scientific protocols for Activity 1, as well as to summarize the technical information associated with the different dry deposition approaches used by the participating research groups of AQMEII4. In addition to describing all common aspects and data used for this multi-model evaluation activity, most importantly, we present the strategy devised to allow a common process-level comparison of dry deposition obtained from models using sometimes very different dry deposition schemes. The strategy is based on adding detailed diagnostics to the algorithms used in the dry deposition modules of existing regional air quality models, in particular archiving diagnostics specific to land use-land cover (LULC) and creating standardized LULC categories to facilitate cross-comparison of LULC-specific dry deposition parameters and processes, as well as archiving effective conductance and effective flux as means for comparing the relative influence of different pathways towards the net or total dry deposition. This new approach, along with an analysis of precipitation and wet deposition fields, will provide an unprecedented process-oriented comparison of deposition in regional air quality models. Examples of how specific dry deposition schemes used in participating models have been reduced to the common set of comparable diagnostics defined for AQMEII4 are also presented.
RESUMEN
The Community Multiscale Air Quality (CMAQ) model version 5.3 (CMAQ53), released to the public in August 2019 and followed by version 5.3.1 (CMAQ531) in December 2019, contains numerous science updates, enhanced functionality, and improved computation efficiency relative to the previous version of the model, 5.2.1 (CMAQ521). Major science advances in the new model include a new aerosol module (AERO7) with significant updates to secondary organic aerosol (SOA) chemistry, updated chlorine chemistry, updated detailed bromine and iodine chemistry, updated simple halogen chemistry, the addition of dimethyl sulfide (DMS) chemistry in the CB6r3 chemical mechanism, updated M3Dry bidirectional deposition model, and the new Surface Tiled Aerosol and Gaseous Exchange (STAGE) bidirectional deposition model. In addition, support for the Weather Research and Forecasting (WRF) model's hybrid vertical coordinate (HVC) was added to CMAQ53 and the Meteorology-Chemistry Interface Processor (MCIP) version 5.0 (MCIP50). Enhanced functionality in CMAQ53 includes the new Detailed Emissions Scaling, Isolation and Diagnostic (DESID) system for scaling incoming emissions to CMAQ and reading multiple gridded input emission files. Evaluation of CMAQ531 was performed by comparing monthly and seasonal mean daily 8 h average (MDA8) O3 and daily PM2.5 values from several CMAQ531 simulations to a similarly configured CMAQ521 simulation encompassing 2016. For MDA8 O3, CMAQ531 has higher O3 in the winter versus CMAQ521, due primarily to reduced dry deposition to snow, which strongly reduces wintertime O3 bias (2-4 ppbv monthly average). MDA8 O3 is lower with CMAQ531 throughout the rest of the year, particularly in spring, due in part to reduced O3 from the lateral boundary conditions (BCs), which generally increases MDA8 O3 bias in spring and fall ( 0.5 µg m-3). For daily 24 h average PM2.5, CMAQ531 has lower concentrations on average in spring and fall, higher concentrations in summer, and similar concentrations in winter to CMAQ521, which slightly increases bias in spring and fall and reduces bias in summer. Comparisons were also performed to isolate updates to several specific aspects of the modeling system, namely the lateral BCs, meteorology model version, and the deposition model used. Transitioning from a hemispheric CMAQ (HCMAQ) version 5.2.1 simulation to a HCMAQ version 5.3 simulation to provide lateral BCs contributes to higher O3 mixing ratios in the regional CMAQ simulation in higher latitudes during winter (due to the decreased O3 dry deposition to snow in CMAQ53) and lower O3 mixing ratios in middle and lower latitudes year-round (due to reduced O3 over the ocean with CMAQ53). Transitioning from WRF version 3.8 to WRF version 4.1.1 with the HVC resulted in consistently higher (1.0-1.5 ppbv) MDA8 O3 mixing ratios and higher PM2.5 concentrations (0.1-0.25 µg m-3) throughout the year. Finally, comparisons of the M3Dry and STAGE deposition models showed that MDA8 O3 is generally higher with M3Dry outside of summer, while PM2.5 is consistently higher with STAGE due to differences in the assumptions of particle deposition velocities to non-vegetated surfaces and land use with short vegetation (e.g., grasslands) between the two models. For ambient NH3, STAGE has slightly higher concentrations and smaller bias in the winter, spring, and fall, while M3Dry has higher concentrations and smaller bias but larger error and lower correlation in the summer.
RESUMEN
This review summarizes the state of the science of measurements of dry deposition of reactive nitrogen (Nr) compounds in North America, beginning with current understanding of the importance of dry deposition at the U.S. continental scale followed by a review of micrometeorological flux measurement methods. Measurements of Nr air-surface exchange in natural ecosystems of North America are then summarized, focusing on the U.S. and Canada. Drawing on this synthesis, research needed to address the incompleteness of dry deposition budgets, more fully characterize temporal and geographical variability of fluxes, and better understand air-surface exchange processes is identified. Our assessment points to several data and knowledge gaps that must be addressed to advance dry deposition budgets and air-surface exchange modeling for North American ecosystems. For example, recent studies of particulate (NO3-) and gaseous (NOx, HONO, peroxy nitrates) oxidized N fluxes challenge the fundamental framework of unidirectional flux from the atmosphere to the surface employed in most deposition models. Measurements in forest ecosystems document the importance of in-canopy chemical processes in regulating the net flux between the atmosphere and biosphere, which can result in net loss from the canopy. These results emphasize the need for studies to quantify within- and near-canopy sources and sinks of the full suite of components of the Nr chemical system under study (e.g., NOy or HNO3-NH3-NH4NO3). With respect to specific ecosystems and geographical locations, additional flux measurements are needed particularly in agricultural regions (NH3), coastal zones (NO3- and organic N), and arid ecosystems and along urban to rural gradients (NO2). Measurements that investigate non-stomatal exchange processes (e.g., deposition to wet surfaces) and the biogeochemical drivers of bidirectional exchange (e.g., NH3) are considered high priority. Establishment of long-term sites for process level measurements of reactive chemical fluxes should be viewed as a high priority long-term endeavor of the atmospheric chemistry and ecological communities.
RESUMEN
Watershed nitrogen (N) budgets provide insights into drivers and solutions for groundwater and surface water N contamination. We constructed a comprehensive N budget for the transboundary Nooksack River Watershed (British Columbia, Canada and Washington, US) using locally-derived data, national statistics and standard parameters. Feed imports for dairy (mainly in the US) and poultry (mainly in Canada) accounted for 30 and 29% of the total N input to the watershed, respectively. Synthetic fertilizer was the next largest source contributing 21% of inputs. Food imports for humans and pets together accounted for 9% of total inputs, lower than atmospheric deposition (10%). N imported by returning salmon representing marine derived nutrients accounted for <0.06 % of total N input. Quantified N export was 80% of total N input, driven by ammonia emission (32% of exports). Animal product export was the second largest output of N (31%) as milk and cattle in the US and poultry products in Canada. Riverine export of N was estimated at 28% of total N export. The commonly used crop nitrogen use efficiency (NUE) metric alone did not provide sufficient information on farming activities but in combination with other criteria such as farm-gate NUE may better represent management efficiency. Agriculture was the primary driver of N inputs to the environment as a result of its regional importance; the N budget information can inform management to minimize N losses. The N budget provides key information for stakeholders across sectors and borders to create environmentally and economically viable and effective solutions.
RESUMEN
Air quality models provide spatial fields of wet deposition (WD) and dry deposition that explicitly account for the transport and transformation of emissions from thousands of sources. However, many sources of uncertainty in the air quality model including errors in emissions and meteorological inputs (particularly precipitation) and incomplete descriptions of the chemical and physical processes governing deposition can lead to bias and error in the simulation of WD. We present an approach to bias correct Community Multiscale Air Quality model output over the contiguous United States using observation-based gridded precipitation data generated by the Parameter-elevation Regressions on Independent Slopes Model and WD observations at the National Atmospheric Deposition Program National Trends Network sites. A cross-validation analysis shows that the adjusted annual accumulated WD for NO3 -, NH4 +, and SO4 2- from 2002 to 2012 has less bias and higher correlation with observed values than the base model output without adjustment. Temporal trends in observed WD are captured well by the adjusted model simulations across the entire contiguous United States. Consistent with previous trend analyses, WD NO3 - and SO4 2- are shown to decrease during this period in the eastern half of the United States, particularly in the Northeast, while remaining nearly constant in the West. Trends in WD of NH4 + are more spatially and temporally heterogeneous, with some positive trends in the Great Plains and Central Valley of CA and slightly negative trends in the south.
RESUMEN
Determination of the amount of reactive nitrogen (Nr) deposition in excess of the ecosystem critical load (CL) requires an estimate of total deposition. Because the CL exceedance is used to inform policy decisions, uncertainty in both the CL and the exceedance itself must be understood. In this paper we review the state of the science with respect to the sources of uncertainty in total Nr deposition budgets used for CL assessments in North America and put forth recommendations for research and monitoring to improve deposition measurements and models. In the absence of methods to rigorously quantify uncertainty in total Nr deposition, a simple weighted deposition uncertainty metric (WDUM) is introduced as a tool for scientists and decision makers to use in assessing CL exceedances. Maps of the WDUM applied to National Atmospheric Deposition Program (NADP) Total Deposition (TDep) estimates show greater uncertainty in areas of the U.S. where dry deposition makes a larger contribution to the deposition budget, particularly ammonia (NH3) in agricultural areas and oxidized nitrogen (NOx) in urban areas. Organic N deposition is an important source of uncertainty over much of the U.S. Our analysis illustrates how the WDUM can be used to assess spatial patterns of deposition uncertainty and inform actions to improve deposition budgets for CL assessments at the local scale.
RESUMEN
Deposition and accumulation of aerosol particles on photovoltaics (PV) panels, which is commonly referred to as "soiling of PV panels," impacts the performance of the PV energy system. It is desirable to estimate the soiling effect at different locations and times for modeling the PV system performance and devising cost-effective mitigation. This study presents an approach to estimate the soiling effect by utilizing particulate matter (PM) dry deposition estimates from air quality model simulations. The Community Multiscale Air Quality (CMAQ) modeling system used in this study was developed by the U.S. Environmental Protection Agency (U.S. EPA) for air quality assessments, rule-making, and research. Three deposition estimates based on different surface roughness length parameters assumed in CMAQ were used to illustrate the soling effect in different land-use types. The results were analyzed for three locations in the U.S. for year 2011. One urban and one suburban location in Colorado were selected because there have been field measurements of particle deposition on solar panels and analysis on the consequent soiling effect performed at these locations. The third location is a coastal city in Texas, the City of Brownsville. These three locations have distinct ambient environments. CMAQ underestimates particle deposition by 40% to 80% when compared to the field measurements at the two sites in Colorado due to the underestimations in both the ambient PM10 concentration and deposition velocity. The estimated panel transmittance sensitivity due to the deposited particles is higher than the sensitivity obtained from the measurements in Colorado. The final soiling effect, which is transmittance loss, is estimated as 3.17⯱â¯4.20% for the Texas site, 0.45⯱â¯0.33%, and 0.31⯱â¯0.25% for the Colorado sites. Although the numbers are lower compared to the measurements in Colorado, the results are comparable with the soiling effects observed in U.S.