Prevalence and predisposing factors of neuropathic pain in patients with rotator cuff tears.

BACKGROUND: The management of pain in patients with rotator cuff tears can be challenging. Neuropathic pain is reportedly associated with pain occurrence in musculoskeletal diseases. However, to date, few studies have reported on the prevalence of neuropathic pain in patients with rotator cuff tears or identified the factors associated with neuropathic pain in a multicenter study. METHODS: A total of 391 patients (205 males and 186 females; median age, 67.7 years; range, 27-92 years) with rotator cuff tears were included in this study. The prevalence of neuropathic pain in rotator cuff tears was investigated using the Japanese version of the painDETECT questionnaire for all patients. In addition, factors significantly associated with the occurrence of neuropathic pain were examined using multivariate logistic regression analysis. RESULTS: Twenty-eight patients (7.2%) were classified into the neuropathic pain group (score ≥19), 97 (24.8%) into the uncertainty regarding neuropathy group (score 13-18), and 266 (68.0%) into the nociceptive pain group (score ≤12). According to the multivariate logistic regression analysis, the independent predictors of neuropathic pain were the VAS score (most severe pain during the past 4 weeks; odds ratio, 1.55; 95% confidence interval [CI], 1.23-2.09) and UCLA shoulder score (odds ratio, 0.81; 95% CI, 0.65-0.97). CONCLUSIONS: Based on the study findings, the prevalence of neuropathic pain in patients with rotator cuff tear was 7.2%. It is important to investigate the presence or absence of neuropathic pain when treating patients with painful rotator cuff tears, because neuropathy associated with rotator cuff tears may adversely affect patient outcomes.

Stump classification was correlated with retear in the suture-bridge and double-row repair techniques for arthroscopic rotator cuff repair.

PURPOSE: The Stump classification is significantly correlated with a retear after arthroscopic rotator cuff repair. However, no study has evaluated whether or not the stump classification is correlated with retear in the suture-bridge or double-row repair techniques. The aim of this study was to evaluate the relationship between a retear and the stump classification in the suture-bridge and double-row repair techniques. METHODS: Among 389 patients who underwent arthroscopic repairs of full-thickness rotator cuff tears using suture-bridge or double-row repair techniques, 326 patients (median age 67.0 years; range 25-85) were included. There were 51 small, 172 medium, 83 large, and 20 massive tears. Two hundred forty patients were treated with the suture-bridge technique, and 86 patients were treated with the double-row technique. The following variables were analyzed: age, sex, the Cofield classification, anteroposterior and mediolateral tear size on preoperative MRI, global fatty degeneration index, and the stump classification. Cuff integrity was evaluated on magnetic resonance imaging at 6 months after surgery. The patients were divided into the intact and retear groups and the relationship between the variables and retear was evaluated by multivariate logistic regression analysis. RESULTS: The overall retear rate was 10.1%. In the multivariate logistic regression analysis, the independent predictors of a retear were the stump classification type 3 (Odds ratio: 4.71, p = 0.0246), global fatty degeneration index (Odds ratio: 3.87, p = 0.0030), and anteroposterior tear size (Odds ratio: 1.07, p = 0.0077) in the suture bridge technique. In the double-row technique, the independent predictors of retear were stump classification type 3 (Odds ratio: 7.82, p = 0.0348), and age (Odds ratio: 1.22, p = 0.0163). CONCLUSION: The stump classification was significantly correlated with retear in the suture-bridge and double-row repair technique. Stump classification type 3 was indicated to be an important risk factor for predicting retear. LEVEL OF EVIDENCE: III.

Evaluation of humeral head cartilage using magnetic resonance imaging T1 rho mapping for patients with small-to-medium rotator cuff tears: A pilot study.

BACKGROUND: It is unclear whether smaller rotator cuff tears cause cartilage degeneration. This study was designed to detect early humeral head cartilage degeneration in patients with small-to-medium cuff tears using magnetic-resonance-imaging T1 rho mapping. METHODS: Five male and 5 female volunteers without shoulder symptoms (control group) and 5 male and 5 female patients with small-to-medium (<3 cm) rotator cuff tears underwent 3.0-T magnetic resonance imaging of a single shoulder. T1 rho values of the humeral head cartilage were measured and analyzed. RESULTS: The total mean T1 rho value was 40.4 ± 3.4 ms for the control group and 45.0 ± 5.3 ms for the patient group. In the control group, the T1 rho values in the inferior articular cartilage were significantly higher than those in the superior and middle articular cartilage. In the patient group, there was no significant difference between all regions. A comparison between the patient and control groups showed that the mean T1 rho values in the superior-to-middle articular cartilage were significantly higher for the patient group than for the control group. However, in the inferior articular cartilage, there was no significant difference between both groups. CONCLUSIONS: This study showed the possibility of early cartilage degenerative changes in the superior-to-middle humeral head articular cartilage of patients with small-to-medium rotator cuff tears.

Mid-term clinical results of primary total knee arthroplasty using metal block augmentation and stem extension in patients with rheumatoid arthritis.

BACKGROUND: Despite recent advancements in rheumatoid arthritis (RA) pharmacotherapy, surgeons still encounter severely damaged knees. The purpose of the present study was to analyze the mid-term clinical results of total knee arthroplasty (TKA) with metal block augmentation and stem extension. METHODS: A total of 26 knees in 21 patients who underwent primary TKA with metal block augmentation and stem extension were retrospectively reviewed. All patients with a mean age of 63 years had RA for a mean duration of 15 years. Functional and radiographic results as well as complications were evaluated at the mean follow-up period of 6 years after TKA. Eight knees were lost follow-up after the two-year evaluation. RESULTS: Tibial bone defects with average depth of 19 mm were preoperatively recognized in all 26 knees. The postoperative joint line was reconstructed on average 11 mm above the fibular head using average thickness of 11 mm tibial inserts and 9 mm metal blocks with stem extension. Significant improvements (p < 0.05 for all comparisons) were observed postoperatively in maximum extension angle from -10° to -1°, range of motion from 101 ° to 115 °, and Knee Society Score (knee score/function score) from 35/18 to 90/64. Non-progressive radiolucent lines beneath the metal block and osteosclerotic changes around the medullary stem were found in 16 knees (62%) and 14 knees (54%), respectively. There was two failures (8%): fragile supracondylar femur fractures and knee instability. No knees showed any radiographic implant loosening, dislocation, polyethylene insert breakage, peroneal palsy, or infection. CONCLUSIONS: Primary TKA with metal block augmentation and stem extension could effectively restore function in RA patients with advanced forms of knee joint destruction, and be reliable and durable for a mean postoperative period of 6 years. Further study is needed to determine the long-term results of TKA using metal block augmentation and stem extension.

Biomechanical Comparison of a Horizontal Mattress, Cross Suture and Vertical Mattress for Repair of a Tendon Weave in a Porcine Model.

Background: An effective suture method enables early active motion exercises and optimal post-surgical outcomes. The aim of this study is to evaluate the tensile strength of three suture configurations - horizontal mattress (HM), vertical mattress (VM) and a cross suture for repair of a tendon weave. We hypothesised that the direction of mattress sutures relative to the tendon fibres would affect the tensile strength of tendon repair. Methods: Using porcine flexor tendons and the same number of surgical sutures, three tendon weave constructs differing in the method of suture were compared: HM suture configuration (conventional technique), cross-stitch (CS) configuration (conventional technique) and VM suture configuration (novel technique). Ten pairs of each group were mounted in a material testing machine and subjected to a simple tensile test and a cyclic loading test for their biomechanical comparison. Results: The VM group and CS group had significantly higher ultimate failure load, linear stiffness and fatigue strength as compared to the HM group. The failure mode was suture breakage or tendon rupture for the VM and the CS group, while the suture pullout of the tendon only occurred in the HM group. Conclusion: Among the three techniques used for repair of a tendon weave, the VM suture technique was demonstrated to have the greatest tensile strength and least associated with suture pull-out. The direction of the mattress suture in relation the direction of tendon fibres affects the strength of repair.

Dynamic scapulohumeral rhythm: Comparison between healthy shoulders and those with large or massive rotator cuff tear.

INTRODUCTION: Assessment of scapular kinematics and the dynamics of the scapulohumeral rhythm (SHR) would be important for understanding pathologies of the shoulder and to inform treatment. Our aim in this study was to evaluate the SHR and scapular kinematics in patients with a rotator cuff tear (RCT), compared to a control group with healthy shoulders using image-matching techniques. MATERIALS AND METHODS: The shoulder kinematics of large or massive RCT patients were evaluated and compared to a control group with healthy shoulders. Radiographic surveillance was performed throughout the full range of external rotation and scapular plane abduction. Computed tomography imaging of the shoulder complex was performed, with three-dimensional image reconstruction and matching to the radiographs to measure three-dimensional positions and orientations. SHR and angular values of the scapula were measured. RESULTS: Scapular external rotation in the late phase of external rotation movement was greater in the RCT group than in the control group (p < 0.05), but with no difference in the SHR. During scapular plane abduction, there were significant differences in SHR, scapular posterior tilt and scapular upward rotation between the RCT and control group (p < 0.05). CONCLUSIONS: Regarding clinical relevance, this study clarified the differences of SHR and angular values of the scapula between the RCT and control group. These results underline the importance of assessment the SHR and scapular kinematics in individuals with a RCT. RCT is associated with specific compensation in the kinematics of the scapula and SHR during external rotation and scapular plane abduction, which could inform treatment.

Histological evaluation of tendon formation using a scaffold-free three-dimensional-bioprinted construct of human dermal fibroblasts under in vitro static tensile culture.

INTRODUCTION: Tendon tissue engineering requires scaffold-free techniques for safe and long-term clinical applications and to explore alternative cell sources to tenocytes. Therefore, we histologically assessed tendon formation in a scaffold-free Bio-three-dimensional (3D) construct developed from normal human dermal fibroblasts (NHDFs) using our Bio-3D printer system under tensile culture in vitro. METHODS: Scaffold-free ring-like tissues were constructed from 120 multicellular spheroids comprising NHDFs using a bio-3D printer. Ring-like tissues were cultured in vitro under static tensile-loading with or without in-house tensile devices (tension-loaded and tension-free groups), with increases in tensile strength applied weekly to the tensile-loaded group. After a 4 or 8-week culture on the device, we evaluated histological findings according to tendon-maturing score and immunohistological findings of the middle portion of the tissues for both groups (n = 4, respectively). RESULTS: Histology of the tension-loaded group revealed longitudinally aligned collagen fibers with increased collagen deposition and spindle-shaped cells with prolonged culture. By contrast, the tension-free group showed no organized cell arrangement or collagen fiber structure. Additionally, the tension-loaded group showed a significantly improved tendon-maturing score as compared with that for the tension-free group at week 8. Moreover, immunohistochemistry revealed tenascin C distribution with a parallel arrangement in the tensile-loading direction at week 8 in the tension-loaded group, which exhibited stronger scleraxis-staining intensity than that observed in the tension-free group at weeks 4 and 8. CONCLUSIONS: The NHDF-generated scaffold-free Bio-3D construct underwent remodeling and formed tendon-like structures under tensile culture in vitro.

Biomechanical analysis of four different medial row configurations of suture bridge rotator cuff repair.

BACKGROUND: Rotator cuff tendon rupture after suture bridge repair occasionally occurs at the medial row, with remnant tendon tissue remaining at the footprint. While concentrated medial row stress is suspected to be involved in such tears, the optimal suture bridge technique remains controversial. METHODS: This study aimed to investigate the construct strength provided by suture bridge techniques having four different medial row configurations using artificial materials (n = 10 per group): Group 1, four-hole (two stitches per hole) knotless suture bridge; Group 2, eight-hole (one stitch per hole) parallel knotless suture bridge; Group 3, eight-hole non-parallel knotless suture bridge; and Group 4, eight-hole knot-tying suture bridge. Each construct underwent cyclic loading from 5 to 30 N for 20 cycles, followed by tensile testing to failure. The ultimate failure load and linear stiffness were measured. FINDINGS: Group 2 had the highest ultimate failure load (mean 160.54 N, SD 6.40) [Group 4 (mean 150.21 N, SD 9.76, p = 0.0138), Group 3 (mean 138.80 N, SD 7.18, p < 0.0001), and Group 1 (mean 129.35 N, SD 4.25, p < 0.0001)]. The linear stiffness of Group 2 (mean 9.32 N/mm, SD 0.25) and Group 4 (mean 9.72 N/mm, SD 0.40) was significantly higher (p = 0.0032) than that of Group 1 (mean 8.44 N/mm, SD 0.29) and Group 3 (mean 8.61 N/mm, SD 0.31). INTERPRETATION: In conclusion, increasing the number of suture-passed holes, arranging the holes in parallel, and a knotless technique improved the failure load following suture bridge repair.

In vivo dynamic acromiohumeral distance in shoulders with rotator cuff tears.

BACKGROUND: There are no previous studies on the acromiohumeral distance in shoulders with large-to-massive full-thickness rotator cuff tears. In this study, the acromiohumeral distance in rotator cuff tear and healthy shoulders was measured using 3D-to-2D model-to-image registration techniques. METHODS: The dynamic glenohumeral kinematics during scapular plane abduction and axial rotation were analyzed in 11 rotator cuff tear patients and 10 healthy control subjects. Periodic radiographic images of scapular plane abduction and axial rotation were taken using a flat-panel radiograph image detector. Movements of the shoulder joint were assessed using radiographic images and computed tomography-derived digitally reconstructed radiographs. The acromiohumeral distance was defined as the shortest 3D distance between the acromion and the proximal humerus. FINDINGS: For scapular plane abduction, the rotator cuff tear group had significantly smaller acromiohumeral distance than the control group at 15°, 30°, 45°, 60°, 75°, 135°, and 150° of humeral abduction (P < 0.05 at each measured angle). For axial rotation in the adducted position, the rotator cuff tear group had significantly smaller acromiohumeral distance than the control group at each point between -20° and 40° of glenohumeral external rotation (P < 0.05 at each measured angle). INTERPRETATION: The minimum measured acromiohumeral distance was 0.9 mm in the rotator cuff tear shoulders and 2.1 mm in the healthy shoulders at 90° of scapular plane abduction. The findings are of clinical relevance because quantitative evaluation of the dynamic acromiohumeral distances in rotator cuff tear and healthy shoulders might provide important insight into subacromial impingement.

Dynamic kinematics of the glenohumeral joint in shoulders with rotator cuff tears.

BACKGROUND: No clear trend has emerged from the literature regarding three-dimensional (3D) translations of the humerus relative to the scapula in shoulders with rotator cuff tears (RCTs). The purpose of this study was to evaluate the kinematics of RCT shoulders using 3D-to-two-dimensional (2D) model-to-image registration techniques. METHODS: Dynamic glenohumeral kinematics during scapular plane abduction and axial rotation were analyzed in 11 RCT patients and 10 healthy control subjects. We measured the 3D kinematic parameters of glenohumeral joints using X-ray images and CT-derived digitally reconstructed radiographs. RESULTS: For scapular plane abduction, the humeral head center was positioned significantly more medially in shoulders with RCTs than in controls at 135° of humeral abduction (p = 0.02; RCTs versus controls: - 0.9 ± 1.6 versus 0.3 ± 1.3 mm). There was no significant difference in the superior/inferior translation of the humeral head center (p = 0.99). For axial rotation in adducted position, the humeral head center was positioned significantly more anteriorly in shoulders with RCTs than in controls at - 30° of glenohumeral external rotation (p < 0.0001; RCTs versus controls: 3.0 ± 1.7 versus 0.3 ± 1.5 mm). CONCLUSIONS: This study revealed the kinematics of shoulders with large to massive full-thickness RCTs: the humeral head center showed a medial shift at the late phase of scapular plane full abduction, and an anterior shift at the internal rotation position during full axial rotation. The kinematic data in this study, which describe the patterns of movement of shoulders with large to massive full-thickness RCTs, provide valuable information for future studies investigating glenohumeral translations in other pathological conditions of the shoulder. For clinical relevance, quantitative assessment of the dynamic kinematics of shoulders with RCTs might be a therapeutic indicator for achieving functional restoration.