RESUMEN
Identifying reactive species in advanced oxidation process (AOP) is an essential and intriguing topic that is also challenging and requires continuous efforts. In this study, we exploited a novel AOP technology involving peracetic acid (PAA) activation mediated by a MnII-nitrilotriacetic acid (NTA) complex, which outperformed iron- and cobalt-based PAA activation processes for rapidly degrading phenolic and aniline contaminants from water. The proposed MnII/NTA/PAA system exhibited non-radical oxidation features and could stoichiometrically oxidize sulfoxide probes to the corresponding sulfone products. More importantly, we traced the origin of O atoms from the sulfone products by 18O isotope-tracing experiments and found that PAA was the only oxygen-donor, which is different from the oxidation process mediated by high-valence manganese-oxo intermediates. According to the results of theoretical calculations, we proposed that NTA could tune the coordination circumstance of the MnII center to elongate the O-O bond of the complexed PAA. Additionally, the NTA-MnII-PAA* molecular cluster presented a lower energy gap than the MnII-PAA complex, indicating that the MnII-peroxy complex was more reactive in the presence of NTA. Thus, the NTA-MnII-PAA* complex exhibited a stronger oxidation potential than PAA, which could rapidly oxidize organic contaminants from water. Further, we generalized our findings to the CoII/PAA oxidation process and highlighted that the CoII-PAA* complex might be the overlooked reactive cobalt species. The significance of this work lies in discovering that sometimes the metal-peroxy complex could directly oxidize the contaminants without the further generation of high-valence metal-oxo intermediates and/or radical species through interspecies oxygen and/or electron transfer.
Asunto(s)
Complejos de Coordinación , Contaminantes Químicos del Agua , Ácido Peracético , Oxígeno , Metales , Complejos de Coordinación/química , Cobalto , Oxidación-Reducción , Agua , Peróxido de HidrógenoRESUMEN
This study identified and detected the existence of major pollutants in northeast China. As an alpine region and an agricultural base, this region has representative significance in pollution research. We selected 56 samples from drinking water sources of typical villages and towns, focusing on the analysis of heavy metals and organic micropollutants in northeast China. The analysis results showed that Fe and Mn were the main metal elements exceeding the standard. The exceeding rates were 17.9% and 19.6%. Experiments showed that there were 19 kinds of pesticides, 6 kinds of OPEs, 2 kinds of PAEs, 22 kinds of PPCPs. The detection rate of these 49 kinds of organic micro-pollutants were 1.79~82.14%. The characteristics of organic pollution were extensive and varied. Many underground water samples had high level of micropollutants. The water quality parameters of drinking water sources in villages and towns showed close relation to local geological conditions and agricultural activities. Actions must be taken to control these parameters from the source of pollution.
Asunto(s)
Agua Potable , Contaminantes Ambientales , Metales Pesados , Agua Potable/análisis , Ciudades , Metales Pesados/análisis , Calidad del Agua , Contaminantes Ambientales/análisis , ChinaRESUMEN
Natural organic matter (NOM) has always been considered the main precursor of disinfection by-products (DBPs) during the chlorine disinfection of drinking water. This research focuses on investigating the correlation between the functional group (carboxyl and carbonyl groups) content of NOM and the formation of trichloromethane (TCM) and chloral hydrate (CH). The quantitative determination of carboxyl groups, carbonyl groups, TCM, and CH were conducted during the drinking water treatment processes with different coagulant dosages and with/without pre-oxidation by KMnO4 or NaClO. The most appropriate coagulant for the removal of conventional components was polyaluminum chloride (PAC), and the dosage was 110 mg/L. Up to 43.7% and 14.5% of the carboxyl and carbonyl groups, respectively, were removed through the coagulation and sedimentation processes, which can be enhanced by increasing PAC dosage. The filtration process further increased the removal rates of these two functional groups to 59.8% and 33.5%, respectively. The formation potential of the TCM and CH decreased as the PAC dosage increased. Pre-oxidation by KMnO4 (0.8-1.0 mg/L) effectively controlled the formation of DBPs while increasing the carboxyl and carbonyl group content. Pre-oxidation by NaClO decreased the formation of TCM rather than CH, and a suitable amount (0.5-1.0 mg/L) decreased the carboxyl and carbonyl groups. It was found that there was a good linear correlation between carboxyl groups and TCM and CH. The linear fit R2 values of the carboxyl groups to TCM and CH were 0.6644 and 0.7957, respectively. The linear fit R2 values of the carbonyl groups to TCM and CH were 0.5373 and 0.7595, respectively.
Asunto(s)
Desinfectantes , Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Trihalometanos/análisis , Hidrato de Cloral/análisis , Agua Potable/análisis , Cloro/análisis , Desinfección , Cloroformo , Contaminantes Químicos del Agua/análisis , Halogenación , Desinfectantes/análisisRESUMEN
The method of treating high concentrations of Cr(VI) alone by NaBH4 has proved feasible, but the effects of the coexistence of Cr(VI) and organic compounds have not been evaluated. The objective of this study was to explore the potential mechanism by which oxalate affects the reduction of high concentrations of Cr(VI) treated by sodium borohydride (NaBH4) and the subsequent precipitation of Cr(III). The results show that Cr(VI) reduction could be gradually promoted by oxalate (1.0-10 mM). Compared with the control solution, the reduction of Cr(VI) in a 10 mM oxalate solution could be increased from 56.6% to 99.1%. Particularly, the promotion of Cr(VI) reduction attributed to the enhancement of OH- production from NaBH4 hydrolysis due to the increasing concentration of C2O42- species, forming conjugated acid-base pairs in the form HC2O4--C2O42-, which provided an effective buffer. In 0.10-0.40 mM oxalate-Cr(VI)-NaBH4 systems, the resulting Cr(III) could precipitate at different levels within 20 h, and showed settlement rates in the range of 8.8% and 95.8%, but no precipitate was found in 1.0-10 mM oxalate-Cr-NaBH4 systems. This is related to whether there was a sufficient oxalate dosage, which could be complexed with Cr (III) at a molar ratio of 1:1. The precipitates were analysed by means of electron spin resonance (ESR), atomic force microscopy (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR), indicating that Cr (III) could support oxalate coprecipitation. The results of the present study reveal the influence of oxalate on Cr(VI) reduction and subsequent Cr (III) precipitation, which are of great significance to the application of NaBH4 in the treatment of industrial wastewater containing Cr(VI)-oxalate.
Asunto(s)
Cromo , Oxalatos , Borohidruros , Oxidación-ReducciónRESUMEN
Aerobic granular sludge (AGS) is a type of biofilm with good sedimentation and density, high biomass, high organic load tolerance and toxicity resistance. Oxytetracycline (OTC) is an antibiotic widely used in livestock and aquaculture, and its low absorption and high residue bring many risks and harms to the ecological environment. In this study, an OTC-degrading strain TJ3 was isolated from AGS and identified as Pandoraea sp. The biodegradation characteristics of OTC by strain TJ3 under different environmental conditions were also investigated. The results showed that the optimal initial pH value and temperature for the culture strain were 6.0 and 30⯰C, respectively. At an inoculation dose of 6% (v/v), the removal rate of OTC by strain TJ3 was remarkable (59.4%). Furthermore, when the sodium acetate was present as an additional substrate, the biomass and the OTC removal rate of strain TJ3 were improved. The biodegradability of strain TJ3 to OTC was proved by LC-QTOF/MS, and two possible biotransformation products, i.e. m/z 416 and 219, were identified. In the bioaugmentation experiments of AGS by strain TJ3, the average OTC removal rate was 92.89% after the stable operation of bioreactor. The chemical oxygen demand (COD), ammonium nitrogen (NH4+-N) and total phosphorus (TP) were efficiently removed. The microbial community structure had significantly changed at the genus level, and the relative abundance of Zoogloea, Pandoraea, Cloacibacterium and Desulfovibrio increased evidently. These results implied that the OTC removal performance and the structural stability of AGS were improved. In this study, Pandoraea sp. TJ3 was applied to removal OTC for the first time, and results showed that Pandoraea sp. TJ3 may be a new auxiliary bacterial resource for the biodegradation of OTC and a potential candidate in the treatment of antibiotic wastewater.
Asunto(s)
Oxitetraciclina , Aguas del Alcantarillado , Aerobiosis , Bacterias , Análisis de la Demanda Biológica de Oxígeno , Reactores Biológicos , Nitrógeno , Eliminación de Residuos LíquidosRESUMEN
Two types of inoculated sludges, granular sludge that had been stored at -20°C and activated sludge, were investigated for the domestication of aerobic granular sludges (AGSs) in sequencing batch reactors (SBRs). The results showed that using the stored granular sludge as inoculation sludge could effectively shorten the domestication time of AGS and yielded mature granular sludge after 22 days of operation. The AGS domesticated by stored granular sludge had better biomass and sedimentation properties; its MLSS and SVI reached 8.55 g/L and 35.27 mL/g, respectively. The removal efficiencies for chemical oxygen demand (COD), ammonium nitrogen (NH4+-N) and total phosphorus (TP) reached 90.76%, 97.39% and 96.40%, respectively. By contrast, 54 days were needed to obtain mature granules using activated sludge. The microbial community structure was probed by using scanning electron microscopy (SEM) and high-throughput sequencing. The results showed that the diversity of the microbial community in mature granules was reduced when stored granular sludge rather than activated sludge was employed as inoculation sludge, and the dominant microbes were changed. The dominant species in mature granules domesticated using stored granular sludge were Zoogloea, Acidovorax and Tolumonas at the genus classification level, while the dominant species were Zoogloea and TM7-genera in granules developed from activated sludge.
Asunto(s)
Reactores Biológicos , Aguas del Alcantarillado/química , Eliminación de Residuos Líquidos/métodos , Aerobiosis , Compuestos de Amonio , Análisis de la Demanda Biológica de Oxígeno , Biomasa , Nitrógeno , Fósforo , Aguas del Alcantarillado/microbiología , Contaminantes Químicos del AguaRESUMEN
Iron silicate was synthesized and characterized as an efficient ozonation catalyst. Results indicated that iron silicate is a microporous material with poor crystallinity. Fe-O-Si and Fe-O bonds were observed on its surface. The Fe-O bonds belonged to α-Fe2O3. Heterogeneous catalytic ozonation test was performed in batch reaction mode, and 4-chloronitrobenzene was used as model organic compounds. Amorphous iron silicate exhibited high catalytic activity, ozone utilization efficiency, and stability in catalytic ozonation. Hydroxyl radical was the dominant oxide species in this process. The reaction mechanism at the solid-water interface indicates that Fe-Si binary oxides on iron silicate surface inhibited ozone futile decomposition. This behavior resulted in enhanced probability of the reaction between ozone and α-Fe2O3 on the iron silicate surface to generate hydroxyl radicals, which promoted 4-chloronitrobenzene removal in aqueous solution.
Asunto(s)
Ozono , Contaminantes Químicos del Agua , Catálisis , Hierro , Nitrobencenos , SilicatosRESUMEN
The removal of Cr(â ¥) by chemical reduction-precipitation is widely applied in wastewater treatment plants. Nevertheless, the formation of Cr(OH)3 with gel properties has weak settlement performance, making it necessary to add a coagulant aid to reduce the settling time and improve the settling effect. In this investigation, a high concentration of Cr(â ¥) was removed using Na2SO3 as a reducing agent and CaO as a coagulant. An improved reduction and precipitation experiment was modeled by applying a three-factor central composite experimental design (CCD). To reveal as many mechanisms as possible for CrT removal, other verification experiments were performed. The CrT removal efficiency decreased, which can be explained by the following three reasons: dissolution of Cr(â ¢), competition for adsorption between Ca2+ and Cr(â ¢) at different coagulation times, and formation of a solubility complex with Cr(â ¢) due to the surplus SO32- in solution. The increasing CrT removal efficiency can be explained by the following two reasons: dissolved Ca2+ from CaO can neutralize CrO2- that is produced by the dissolution of Cr(OH)3 in alkaline solution and can broaden the optimal final pH range of coagulation. Ca2+ could also strengthen the CrT removal through adsorption bridging and co-precipitation with CaO as the core of flocs.
Asunto(s)
Cromo , Purificación del Agua , Adsorción , Concentración de Iones de Hidrógeno , Aguas ResidualesRESUMEN
Five types of pharmaceuticals and personal care products (PPCPs) substances were selected as pollutants in this study. The effects of the removal of these pollutants and the microbial succession process in a granular sludge membrane bioreactor (GMBR) were investigated. Results showed that wastewater containing PPCPs influenced the performance of granular sludge. The removal of the five PPCPs from the GMBR had different effects. The removal rates of prednisolone, norfloxacin and naproxen reached 98.5, 87.8 and 84 %, respectively. The degradation effect in the GMBR system was relatively lower for sulphamethoxazole and ibuprofen, with removal efficiency rates of 79.8 and 63.3 %, respectively. Furthermore, the microbial community structure and diversity variation of the GMBR were analysed via high-throughput sequencing technology. The results indicated the structural and functional succession of the microbial community based on the GMBR process. The results indicate the key features of bacteria with an important role in drug degradation.
Asunto(s)
Reactores Biológicos/microbiología , Biota , Membranas/microbiología , Preparaciones Farmacéuticas/metabolismo , Aguas del Alcantarillado/microbiología , Contaminantes Químicos del Agua/metabolismo , Aerobiosis , Biotransformación , Aguas Residuales , Purificación del AguaRESUMEN
An aerobic granular sludge membrane bioreactor (GMBR) was applied to the treatment of pharmaceutical and personal care products (PPCPs) wastewater. The influence of granular sludge on five antibiotic and antiphlogistic PPCPs wastewater and the removal effect of methyl alcohol and conventional organic matter were investigated while constantly reducing the density of inflow organic matter. The results showed that the sludge granulation process in the system was rapid but unstable, and that the system exhibits a dissolution-reunion dynamic equilibrium. The reactor demonstrated varying removal effects of PPCPs on different objects. The use of a GMBR was more effective for the removal of prednisolone, naproxen, and ibuprofen; the first two drugs were lower the average removal rate of which reached 98.46 and 84.02 %, respectively; whereas the average removal rate of ibuprofen was 63.32 %. By contrast, the GMBR has an insignificant degradation effect on antibiotics such as amoxicillin, indicating that such antibiotic medicine is not easily degraded by microorganisms, which plays different roles in system operation. Because of the different chemical structures and characteristics of drugs that result in various degradation behavior. During the GMBR granulation process, the value of mixed liquor volatility suspended solids (MLVSS) gradually increases from 1.5 to 4.1 g/L during the GMBR granulation process, and the removal rate of CODCr reaches up to 87.98 %. After reducing the density of organic matter is reduced, the removal rates of NH3-N and TP both reach more than 90 %, respectively. Moreover, the proposed technique is considerably effective in the removal of methanol.
Asunto(s)
Antiinflamatorios/metabolismo , Reactores Biológicos/microbiología , Membranas/microbiología , Aguas del Alcantarillado/microbiología , Contaminantes Químicos del Agua/metabolismo , Aerobiosis , Amoníaco/metabolismo , Antibacterianos/metabolismo , Consorcios Microbianos , Nitrógeno/metabolismo , Compuestos Orgánicos/metabolismoRESUMEN
Inoculated sludge from the Brewery wastewater treatment plant was cultured in a sequencing batch reactor (SBR). The granular sludge was then used to process the artificial simulation wastewater to compare the performance and efficiency of the granular sludge in organic matter removal by using SBR and granular membrane bioreactor (GMBR). Results showed that the granular sludge in the SBR exhibited desirable characteristics and good removal efficiency. The mixed liquor suspended solids (MLSS) and the sludge volume index (SVI) were approximately 2.56 g/L and 78.13 mL/g, respectively, and it exhibited a satisfactory settling ability. The removal efficiency of the resulting chemical oxygen demand (COD), NH3-N and total phosphorus (TP) reached 89.35%, 96.49% and 83.76%, respectively. The removal efficiency of both nitrate nitrogen and total nitrogen (TN) reached 90%. The performance of the granular sludge as well as the removal efficiency of the organic matter in the GMBR was subsequently observed. Results showed that the process influenced the characteristics and microbial biomass of the granular sludge. The SVI and the MLSS were about 175.82 mL/g and 1.14 g/L, respectively. The removal efficiency of COD and TP increased to 93.17% and 90.42%, respectively. The removal efficiency of NH3-N was slightly affected, whereas that of both nitrate nitrogen and TN increased to 95%. In this study, the physical properties and the removal efficiency of granular sludge in different bioreactors were compared. The comparison demonstrated that granulation membrane bioreactors perform more efficiently compared with SBR in wastewater treatment for organic matter removal.
Asunto(s)
Reactores Biológicos , Aguas del Alcantarillado/química , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Aerobiosis , Análisis de la Demanda Biológica de Oxígeno , Biomasa , Diseño de Equipo , Nitratos/química , Nitrógeno/química , Fósforo/química , Aguas Residuales , Agua/química , Purificación del Agua/métodosRESUMEN
A novel treatment technique by coupling granular activated carbon (GAC) adsorption and ozone regeneration was constructed for long-lasting water decontamination. The GAC adsorption showed high performance for atrazine (ATZ) removal (99.9 %), and the ozone regeneration ensured the recyclability of GAC for water purification. The regeneration process was evaluated via several paths to assist the efficient adsorption process. Employing ozone micro-nano bubbles (O3-MNBs) for regenerating GAC showed superior performance compared to traditional ozone. Meantime, inhibiting the formation of bromate (BrO3-). ATZ adsorption process suffered from the pore-filling, hydrogen bonding effect and π-π EDA interaction. The surface phenolic hydroxyl group, carboxyl group and pyridine nitrogen benefitted the triggering of ozone to generate reactive oxygen species, and regenerate the GAC surface. The superior performance of the adsorption and regeneration process was verified via a long-term running by a pilot study. It significantly improved the removal of organic micropollutants, UV254 and permanganate index. Additionally, the intermittent O3-MNBs regeneration process resulted in efficient decontamination within the pores structure of GAC, which also effectively preserved the pore structure from destruction. For actual application, the cost of water production can be saved around 0.63 kWh m-3. This work proposed new ideas and theoretical support for economic water production.
Asunto(s)
Atrazina , Bencenosulfonatos , Ozono , Contaminantes Químicos del Agua , Purificación del Agua , Carbón Orgánico/química , Proyectos Piloto , Ozono/química , Purificación del Agua/métodos , Contaminantes Químicos del Agua/análisis , Agua , AdsorciónRESUMEN
The catalytic ozonation of p-chloronitrobenzene (pCNB) in an aqueous solution using pumice-supported zinc oxyhydroxide (ZMP) as the catalyst was investigated. ZMP significantly enhanced the degradation efficiency in the heterogeneous catalytic ozonation compared with ozonation alone. The decomposition rate of the aqueous ozone increased 2.84-fold in the presence of ZMP. Catalytic ozone decomposition showed that pCNB is oxidized primarily by hydroxyl radicals (â¢OH) in ozonation/ZMP processes. This modification increases the density of surface hydroxyl groups as well as the pH at the point of zero charge (pHPZC) of pumice, resulting in the appearance of new ZnO and Zn(OH)2 crystalline phases. An investigation of the underlying mechanism confirms that ZnOOH loading promotes â¢OH initiation, which enhances the degradation of pCNB.
Asunto(s)
Nitrobencenos/química , Ozono/química , Contaminantes Químicos del Agua/química , Compuestos de Zinc/química , Catálisis , Radical Hidroxilo/química , SilicatosRESUMEN
The removal of p-chloronitrobenzene (pCNB) was investigated by a heterogeneous Fenton-like system using a laboratory synthesized goethite (FeOOH) as catalyst. The influencing factors and the degradation pathway of pCNB were also evaluated. With a stronger catalytic activity than Fe(2+) catalyst, the synthesized FeOOH catalyst can significantly promote the decomposition of H(2)O(2), and the decomposition product hydroxyl radicals (·OH) can oxidize pCNB in the water effectively. The FeOOH catalyst can also adsorb a certain amount of pCNB, and the adsorption effect is related to the amount of FeOOH and the initial pH value of solution. The results of liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) showed that the main intermediate products were phenolic compounds and carbonyl compounds. About 60% of pCNB was mineralized during the catalytic oxidation, and chlorine and nitro groups on benzene ring were converted into Cl(-) and NO(3)(-) after being attacked.
Asunto(s)
Compuestos de Hierro/síntesis química , Minerales/síntesis química , Nitrobencenos/química , Adsorción , Catálisis , Estructura Molecular , Contaminantes Químicos del Agua/químicaRESUMEN
A pilot-scale ballasted flocculation system was used to remove fluoride from one type of industrial wastewater. The system included the formation of calcium fluoride (CaF2) using calcium hydroxide followed by coagulation sedimentation. Calcium fluoride was recycled as nuclei for enhancing CaF2 precipitation and as a ballasting agent for improving fluoride removal and flocculation efficiency. Factors affecting fluoride and turbidity removal efficiencies, including pH in the CaF2-reacting tank and coagulation-mixing tank, sludge recycling ratio, and dosages of FeCl3 and polyacrylamide (PAM), were investigated in the pilot-scale system. The recycled CaF2 precipitates improved CaF2 formation kinetics, enhanced fluoride removal and flocculation performance. Under the optimized condition, the ballast flocculation process reduced fluoride concentration from 288.9 to 10.67 mg/L and the turbidity from 129.6 NTU to below 2.5 NTU.
Asunto(s)
Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodos , Fluoruro de Calcio/análisis , Floculación , Concentración de Iones de Hidrógeno , Contaminantes Químicos del AguaRESUMEN
The Songhua River is the third largest river in China and the primary source of drinking and irrigation water for northeastern China. The distribution of 16 priority polycyclic aromatic hydrocarbons (PAHs) in water [dissolved water (DW) and suspended particulate matter (SPM)], sediment, and soil in the river basin was investigated, and the associated risk of cancer from these PAHs was also assessed. The total concentration of PAHs ranged from 13.9 to 161 ng L(-1) in DW, 9.21 to 83.1 ng L(-1) in SPM, 20.5 to 632 ng g(-1) dw (dry weight) in sediment, and from 30.1 to 870 ng g(-1) dw in soil. The compositional pattern of PAHs indicated that three-ring PAHs were predominant in DW and SPM samples, while four-ring PAHs dominated in sediment and soil samples. The spatial distribution of PAHs revealed some site-specific sources along the river, with principal component analysis indicating that these were from pyrogenic sources (such as coal and biomass combustion, and vehicle emissions) and coke oven emission distinguished as the main source of PAHs in the Songhua River Basin. Based on the ingestion of PAH-contaminated drinking water from the Songhua River, cancer risk was quantitatively estimated by combining the Incremental Lifetime Cancer Risk assessment model and BaP-equivalent concentration for five age groups of people (adults, teenagers, children, toddlers, and infants). Overall, the results suggest that the estimated integrated lifetime cancer risk for all groups was in acceptable levels. This study is the first attempt to provide information on the cancer risk of PAHs in drinking water from the Songhua River.
Asunto(s)
Monitoreo del Ambiente , Hidrocarburos Policíclicos Aromáticos/análisis , Contaminantes Químicos del Agua/análisis , China , Sedimentos Geológicos/química , Ríos/química , Suelo/químicaRESUMEN
Nano zero-valent iron (nZVI) has a great potential for arsenic removal, but it would form aggregates easily and consume largely by H+ in the strongly acidic solution. In this work, 15%CaO doped with nZVI (15%CaO-nZVI) was successfully synthesized from a simplified ball milling mixture combined with a hydrogen reduction method, which had a high adsorption capacity for As(V) removal from high-arsenic acid wastewater. More than 97% As(V) was removed by 15%CaO-nZVI under the optimum reaction conditions of pH 1.34, initial As(V) concentration 16.21 g/L, and molar ratio of Fe/As (nFe/nAs) 2.5:1. The effluent pH solution was weakly acidic 6.72, and the secondary arsenic removal treatment reduced the solid waste and improved arsenic grade in slag from the mass fraction of 20.02% to 29.07%. Multiple mechanisms including Ca2+ enhanced effect, adsorption, reduction, and co-precipitation coexisted for As(V) removal from high-arsenic acid wastewater. Doping of CaO might lead to improving cracking channels which was benefit for electronic transmission and the confusion of atomic distribution. The in situ weak alkaline environment generated on the surface of 15%CaO-nZVI would increase the content of γ-Fe2O3/Fe3O4, which was in favor for As(V) adsorption. In addition, H+ in the strongly acidic solution could accelerate corrosion of 15%CaO-nZVI and abundant fresh and reactive iron oxides continuously generated, which would provide plenty specific reactive site and fast charge transfer and ionic mobility for arsenic removal.
Asunto(s)
Arsénico , Contaminantes Químicos del Agua , Purificación del Agua , Hierro/química , Arsénico/análisis , Aguas Residuales , Contaminantes Químicos del Agua/análisis , Óxidos/química , AdsorciónRESUMEN
In this study, a novel in situ iron-loaded activated carbon (AFPAC) was prepared by a FeSO4/K2FeO4 impregnation and oxidation combination two-step supported on activated carbon for enhanced removal of Cr(VI) from aqueous solutions. Cr(VI) removal efficiency greatly increased by AFPAC more than 70% than that of fresh activated carbon (AC), which is due to rich iron oxides formed in situ and the synergistic effect between iron oxides and activated carbon. Cr(VI) adsorption behaviors on AFPAC under different water quality parameters were investigated. The maximum monolayer adsorption capacities for Cr(VI) by AFPAC are as high as 26.24 mg/g, 28.65 mg/g, and 32.05 mg/g at 25 °C, 35 °C and 45 °C at pH 4, respectively. Density functional theory (DFT) results showed that the adsorption energy of K2Cr2O7 on the surface of FeOOH was - 2.52 eV, which was greater than that on the surface of bare AC, and more charge transfer occurred during the adsorption of K2Cr2O7 on the surface of FeOOH, greatly promoting the formation of Cr = O-Fe. Cr(VI) removal by AFPAC included electrostatic attraction, redox reaction, coordinate complexation, and co-precipitation. Cr(VI) adsorption process on AFPAC consisted of the three reaction steps: (1) AFPAC was fast protonation and Cr2O72- would electrostatically attract to the positively charged AFPAC surface. (2) Cr2O72- was reduced into Cr2O3 by the carbons bond to the oxygen functionalities on activated carbon and the redox reaction process of FeSO4 and K2FeO4. (3) The inner-sphere complexes were formed, and adsorbed on AFPAC by iron oxides and then co-precipitation.
Asunto(s)
Hierro , Contaminantes Químicos del Agua , Hierro/química , Carbón Orgánico/química , Contaminantes Químicos del Agua/análisis , Cromo/química , Adsorción , Compuestos Ferrosos , ÓxidosRESUMEN
This study was carried out to investigate the enhanced removal of arsenite (As(III)) by potassium ferrate (K2FeO4) coupled with three Al-based coagulants, which focused innovatively on the distribution and transformation of hydrolyzed aluminum species as well as the mechanism of K2FeO4 interacted with different aluminum hydrolyzed polymers during As(III) removal. Results demonstrated that As(III) removal efficiency could be substantially elevated by K2FeO4 coupled with three Al-based coagulants treatment and the optimum As(III) removal effect was occurred at pH 6 with more than 97%. K2FeO4 showed a great effect on the distribution and transformation of aluminum hydrolyzed polymers and then coupled with a variety of aluminum species produced by the hydrolysis of aluminum coagulants for arsenic removal. During enhanced coagulation, arsenic removal by AlCl3 was main through the charge neutralization of in situ Al13 and the sweep flocculation of Al(OH)3, while PACl1 mainly depended on the charge neutralization of preformed Al13 and the bridging adsorption of Al13 aggregates, whereas PACl2 mainly relied on the sweep flocculation of Al(OH)3. This study provided a new insight into the distribution and transformation of aluminum species for the mechanism of As(III) removal by K2FeO4 coupled with different Al-based coagulants.
Asunto(s)
Arsénico , Purificación del Agua , Aluminio , Purificación del Agua/métodos , Hidróxido de Aluminio , Polímeros , FloculaciónRESUMEN
It is well known the capacity of potassium ferrate (Fe(VI)) for the oxidation of pollutants or co-precipitation and adsorption of hazardous species. However, little information has been paid on the adsorption and co-precipitation contribution of the Fe(VI) resultant nanoparticles, the in situ hydrolytic ferric iron oxides. Here, the removal of arsenate (As(V)) and arsenite (As(III)) by Fe(VI) was investigated, which focused on the interaction mechanisms of Fe(VI) with arsenic, especially in the contribution of the co-precipitation and adsorption of its hydrolytic ferric iron oxides. pH and Fe(VI) played significant roles on arsenic removal; over 97.8% and 98.1% of As(V) and As(III) removal were observed when Fe(VI):As(V) and Fe(VI):As(III) were 24:1 and 16:1 at pH 4, respectively. The removal of As(V) and As(III) by in situ and ex situ formed hydrolytic ferric iron oxides was examined respectively. The results revealed that As(III) was oxidized by Fe(VI) to As(V), and then was removed though co-precipitation and adsorption by the hydrolytic ferric iron oxides with the contribution content was about 1:3. For As(V), it could be removed directly by the in situ formed particles from Fe(VI) through co-precipitation and adsorption with the contribution content was about 1:1.5. By comparison, As(III) and As(V) were mainly removed through adsorption by the 30-min hydrolytic ferric iron oxides during the ex situ process. The hydrolytic ferric iron oxides size was obviously different in the process of in situ and ex situ, possessing abundant and multiple morphological structures ferric oxides, which was conducive for the efficient removal of arsenic. This study would provide a new perspective for understanding the potential of Fe(VI) treatment on arsenic control.