RESUMEN
Silk fibroin (SF) is a biocompatible natural protein with excellent mechanical characteristics. SF-based biomaterials can be structured using a number of techniques, allowing the tuning of materials for specific biomedical applications. In this study, SF films, porous membranes, and electrospun membranes were produced using solvent-casting, salt-leaching, and electrospinning methodologies, respectively. SF-based materials were subjected to physicochemical and biological characterizations to determine their suitability for tissue regeneration applications. Mechanical analysis showed stress-strain curves of brittle materials in films and porous membranes, while electrospun membranes featured stress-strain curves typical of ductile materials. All samples showed similar chemical composition, melting transition, hydrophobic behavior, and low cytotoxicity levels, regardless of their architecture. Finally, all of the SF-based materials promote the proliferation of human umbilical vein endothelial cells (HUVECs). These findings demonstrate the different relationship between HUVEC behavior and the SF sample's topography, which can be taken advantage of for the design of vascular implants.
Asunto(s)
Fibroínas , Humanos , Fibroínas/química , Andamios del Tejido/química , Materiales Biocompatibles/química , Células Endoteliales de la Vena Umbilical Humana , Porosidad , Seda/química , Ingeniería de TejidosRESUMEN
Among the stimuli to which cells are exposed in vivo, it has been shown that tensile deformations induce specific cellular responses in musculoskeletal, cardiovascular, and stromal tissues. However, the early response of cells to sustained substrate-based stretch has remained elusive because of the short timescale at which it occurs. To measure the tensile mechanical properties of adherent cells immediately after the application of substrate deformations, we have developed a dynamic traction force microscopy method that enables subsecond temporal resolution imaging of transient subcellular events. The system employs a novel, to our knowledge, tracking approach with minimal computational overhead to compensate substrate-based, stretch-induced motion/drift of stretched single cells in real time, allowing capture of biophysical phenomena on multiple channels by fluorescent multichannel imaging on a single camera, thus avoiding the need for beam splitting with the associated loss of light. Using this tool, we have characterized the transient subcellular forces and nuclear deformations of single cells immediately after the application of equibiaxial strain. Our experiments reveal significant differences in the cell relaxation dynamics and in the intracellular propagation of force to the nuclear compartment in cells stretched at different strain rates and exposes the need for time control for the correct interpretation of dynamic cell mechanics experiments.
Asunto(s)
Fenómenos Mecánicos , Fenómenos Biofísicos , Microscopía de Fuerza Atómica , Estrés MecánicoRESUMEN
Although mechanisms of cell-material interaction and cellular mechanotransduction are increasingly understood, the mechanical insensitivity of mesenchymal cells to certain soft amorphous biomaterial substrates has remained largely unexplained. We reveal that surface energy-driven supramolecular ligand assembly can regulate mesenchymal stem cell (MSC) sensing of substrate mechanical compliance and subsequent cell fate. Human MSCs were cultured on collagen-coated hydrophobic polydimethylsiloxane (PDMS) and hydrophilic polyethylene-oxide-PDMS (PEO-PDMS) of a range of stiffnesses. Although cell contractility was similarly diminished on soft substrates of both types, cell spreading and osteogenic differentiation occurred only on soft PDMS and not hydrophilic PEO-PDMS (elastic modulus <1 kPa). Substrate surface energy yields distinct ligand topologies with accordingly distinct profiles of recruited transmembrane cell receptors and related focal adhesion signaling. These differences did not differentially regulate Rho-associated kinase activity, but nonetheless regulated both cell spreading and downstream differentiation.
Asunto(s)
Mecanotransducción Celular/fisiología , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/fisiología , Materiales Biocompatibles/metabolismo , Adhesión Celular , Diferenciación Celular , Proliferación Celular , Colágeno/química , Módulo de Elasticidad , Humanos , Transducción de Señal , Células Madre , Tensión SuperficialRESUMEN
BACKGROUND: Fascin-1, a prominent actin-bundling protein, is found to be upregulated in several human carcinomas. While it is accepted that Fascin-1 expression correlates with poor clinical outcome and decreased survival in various carcinomas, its role in sarcoma such as osteosarcoma (OS) remains unknown. In the present study, we evaluated the prognostic value and biological relevance of Fascin-1 in OS. METHODS: The correlation between Fascin-1 expression and the outcome of OS patients was determined by immunohistochemistry analysis of Fascin-1 expression in a tissue microarray of OS tissue specimens collected during primary tumor resection. To examine the effect of Fascin-1, shRNA and overexpression technology to alter Fascin-1 levels in OS cells were used in cellular assays as well as in intratibial xenograft OS models in SCID mice. RESULTS: Kaplan-Meier survival analysis of Fascin-1 expression in OS tumor specimens revealed a direct relationship between Fascin-1 expression and poor patient survival. Furthermore, overexpression of Fascin-1 in OS cells significantly increased their migratory capacity as well as the activity of the matrix metalloprotease MMP-9, known to be critical for the execution of metastasis. Finally, using relevant xenograft mouse models, orthotopic intratibial transplantation of two different OS cell lines overexpressing Fascin-1 promoted tumor growth and lung metastasis. CONCLUSIONS: Collectively, our findings demonstrate for the first time that Fascin-1 has considerable potential as a novel prognostic biomarker in OS, and suggest that targeting of Fascin-1 might be a new anti-metastatic strategy in OS patient treatment.
Asunto(s)
Biomarcadores de Tumor/metabolismo , Neoplasias Óseas/patología , Proteínas Portadoras/metabolismo , Proteínas de Microfilamentos/metabolismo , Osteosarcoma/patología , Adolescente , Adulto , Animales , Biomarcadores de Tumor/genética , Neoplasias Óseas/mortalidad , Huesos/patología , Proteínas Portadoras/genética , Línea Celular Tumoral , Movimiento Celular , Niño , Femenino , Humanos , Masculino , Ratones , Ratones SCID , Proteínas de Microfilamentos/genética , Osteosarcoma/mortalidad , Pronóstico , ARN Interferente Pequeño/metabolismo , Análisis de Supervivencia , Análisis de Matrices Tisulares , Ensayos Antitumor por Modelo de Xenoinjerto , Adulto JovenRESUMEN
Intoxication of eukaryotic cells by Photorhabdus luminescens toxin TccC3 induces cell rounding and detachment from the substratum within a few hours and compromises a number of cell functions like phagocytosis. Here, we used morphological and biochemical procedures to analyse the mechanism of TccC3 intoxication. Life imaging of TccC3-intoxicated HeLa cells transfected with AcGFP-actin shows condensation of F-actin into large aggregates. Life cell total internal reflection fluorescence (TIRF) microscopy of identically treated HeLa cells confirmed the formation of actin aggregates but also disassembly of F-actin stress fibres. Recombinant TccC3 toxin ADP-ribosylates purified skeletal and non-muscle actin at threonine148 leading to a strong propensity to polymerize and F-actin bundle formation as shown by TIRF and electron microscopy. Native gel electrophoresis shows strongly reduced binding of Thr148-ADP-ribosylated actin to the severing proteins gelsolin and its fragments G1 and G1-3, and to ADF/cofilin. Complexation of actin with these proteins inhibits its ADP-ribosylation. TIRF microscopy demonstrates rapid polymerization of Thr148-ADP-ribosylated actin to curled F-actin bundles even in the presence of thymosin ß4, gelsolin or G1-3. Thr148-ADP-ribosylated F-actin cannot be depolymerized by gelsolin or G1-3 as verified by TIRF, co-sedimentation and electron microscopy and shows reduced treadmilling as indicated by a lack of stimulation of its ATPase activity after addition of cofilin-1.
Asunto(s)
Actinas/metabolismo , Adenosina Difosfato/metabolismo , Toxinas Bacterianas/metabolismo , Photorhabdus/metabolismo , Agregación Patológica de Proteínas , Células Epiteliales/efectos de los fármacos , Células HeLa , Humanos , Microscopía Electrónica , Microscopía FluorescenteRESUMEN
Two distinct dimers are formed during the initial steps of actin polymerization. The first one, referred to as the 'lower dimer' (LD) was discovered many years ago by means of chemical crosslinking. Owing to its transient nature, a biological relevance had long been precluded when, using LD-specific antibodies, we detected LD-like contacts in actin assemblies that are associated with the endolysosomal compartment in a number of different cell lines. Moreover, immunofluorescence showed the presence of LD-related structures at the cell periphery of migrating fibroblasts, in the nucleus, and in association with the centrosome of interphase cells. Here, we explore contributions of the LD to the assembly of supramolecular actin structures in real time by total internal reflection fluorescence (TIRF) microscopy. Our data shows that while LD on its own cannot polymerize under filament forming conditions, it is able to incorporate into growing F-actin filaments. This incorporation of LD triggers the formation of X-shaped filament assemblies with barbed ends that are pointing in the same direction in the majority of cases. Similarly, an increased frequency of junction sites was observed when filaments were assembled in the presence of oxidized actin. This data suggests that a disulfide bridge between Cys374 residues might stabilize LD-contacts. Based on our findings, we propose two possible models for the molecular mechanism underlying the supramolecular actin patterning in LD-related structures.
Asunto(s)
Citoesqueleto de Actina/química , Actinas/química , Citoesqueleto/ultraestructura , Multimerización de Proteína , Citoesqueleto de Actina/ultraestructura , Actinas/ultraestructura , Animales , Núcleo Celular/química , Núcleo Celular/ultraestructura , Cisteína/química , Citoesqueleto/química , Microscopía Electrónica de Transmisión de Rastreo , Microscopía Fluorescente , Conformación Proteica , ConejosRESUMEN
Formins are actin polymerization factors that are known to nucleate and elongate actin filaments at the barbed end. In the present study we show that human FHOD1 lacks actin nucleation and elongation capacity, but acts as an actin bundling factor with capping activity toward the filament barbed end. Constitutively active FHOD1 associates with actin filaments in filopodia and lamellipodia at the leading edge, where it moves with the actin retrograde flow. At the base of lamellipodia, FHOD1 is enriched in nascent, bundled actin arcs as well as in more mature stress fibers. This function requires actin-binding domains located N-terminally to the canonical FH1-FH2 element. The bundling phenotype is maintained in the presence of tropomyosin, confirmed by electron microscopy showing assembly of 5 to 10 actin filaments into parallel, closely spaced filament bundles. Taken together, our data suggest a model in which FHOD1 stabilizes actin filaments by protecting barbed ends from depolymerization with its dimeric FH2 domain, whereas the region N-terminal to the FH1 domain mediates F-actin bundling by simultaneously binding to the sides of adjacent F-actin filaments.
Asunto(s)
Citoesqueleto de Actina/metabolismo , Proteínas Fetales/metabolismo , Proteínas Nucleares/metabolismo , Fibras de Estrés/metabolismo , Citoesqueleto de Actina/ultraestructura , Actinas/metabolismo , Animales , Células COS , Chlorocebus aethiops , Forminas , Humanos , Proteínas de Microfilamentos/metabolismo , Unión Proteica , Fibras de Estrés/ultraestructuraRESUMEN
Next-generation high-performance polymers require consideration as sustainable solutions. Here, to satisfy these criteria, we propose to combine high-performance styrenic block copolymers, a class of thermoplastic elastomer, with cellulose derivatives as a reinforcing agent with the aim of maintaining and/or improving structural and surface properties. A great advantage of the proposed blends is, besides their biocompatibility, a decrease in environmental impact due to blending with a natural polymer. Particularly, we focus on identifying the effect of different blending compounds and blend ratios on the morphological, structural, thermal, mechanical, electrical and cytotoxic characteristics of materials. This research provides, together with novel material formulations, practical guidelines for the design and fabrication of next-generation sustainable high-performance polymers.
RESUMEN
The extensive use of polymers in the medical field has facilitated the development of various devices and implants, contributing to the restoration of organ function. However, despite their advantages such as biocompatibility and robustness, these materials often face challenges like bacterial contamination and subsequent inflammation, leading to implant-associated infections (IAI). Integrating implants effectively is crucial to prevent bacterial colonization and reduce inflammatory responses. To overcome these major issues, surface chemical modifications have been extensively explored. Indeed, click chemistry, and particularly, copper (I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction has emerged as a promising approach for surface functionalization without affecting material bulk properties. Curcumin, known for its diverse biological activities, suffers from low solubility and stability. To enhance its bioavailability, bioconjugation strategy has garnered attention in recent years. This study represents pioneering work in immobilizing curcumin derivative onto polyethylene terephthalate (PET) surfaces, aiming to combat bacterial adhesion, inflammation and coagulation. Before curcumin derivative bioconjugation, a fluorophore, dansyl derivative, was employed in order to monitor and determine the efficiency of the proposed methodology. Previous surface chemical modifications were required for the immobilization of both dansyl and curcumin derivatives. Ultraviolet-Visible (UV-Vis) demonstrated the amidation functionalization of PET surface. Other surface characterization techniques including X-ray Photoelectron Spectroscopy (XPS), Attenuated Total Reflectance Fourier Transformed Infrared (ATR-FTIR), Scanning Electron Microscopy (SEM) and contact angle, among others, confirmed also the conjugation of both dansyl and curcumin derivatives. On the other hand, different biological assays corroborated that curcumin derivative immobilized PET surfaces do not exhibit cytotoxicity effect. Additionally, corresponding inflammation test were performed, indicating that these polymeric surfaces do not produce inflammation and, when curcumin derivative is immobilized, they decrease the inflammation marker level (IL-6). Moreover, the bacterial growth of both Gram positive and Gram negative bacteria were measured, demonstrating that the immobilization of curcumin derivative on PET provided antibacterial properties to the material. Finally, hemolysis rate analysis and whole blood clotting assay demonstrated the antithrombogenic effect of PET-Cur surfaces as well as no hemolysis concern in the fabricated functional surfaces.
Asunto(s)
Curcumina , Inflamación , Polímeros , Curcumina/farmacología , Curcumina/química , Inflamación/tratamiento farmacológico , Polímeros/química , Polímeros/farmacología , Humanos , Propiedades de Superficie , Antibacterianos/farmacología , Antibacterianos/química , Antibacterianos/síntesis química , Coagulación Sanguínea/efectos de los fármacos , Pruebas de Sensibilidad Microbiana , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Adhesión Bacteriana/efectos de los fármacos , Escherichia coli/efectos de los fármacosRESUMEN
The precise mechanisms underlying the cellular response to static electric cues remain unclear, limiting the design and development of biomaterials that utilize this parameter to enhance specific biological behaviours. To gather information on this matter we have explored the interaction of collagen type-I, the most abundant mammalian extracellular protein, with poly(vinylidene fluoride) (PVDF), an electroactive polymer with great potential for tissue engineering applications. Our results reveal significant differences in collagen affinity, conformation, and interaction strength depending on the electric charge of the PVDF surface, which subsequently affects the behaviour of mesenchymal stem cells seeded on them. These findings highlight the importance of surface charge in the establishment of the material-protein interface and ultimately in the biological response to the material. STATEMENT OF SIGNIFICANCE: The development of new tissue engineering strategies relies heavily on the understanding of how biomaterials interact with biological tissues. Although several factors drive this process and their driving principles have been identified, the relevance and mechanism by which the surface potential influences cell behaviour is still unknown. In our study, we investigate the interaction between collagen, the most abundant component of the extracellular matrix, and poly(vinylidene fluoride) with varying surface charges. Our findings reveal substantial variations in the binding forces, structure and adhesion of collagen on the different surfaces, which collectively explain the differential cellular responses. By exposing these differences, our research fills a critical knowledge gap and paves the way for innovations in material design for advanced tissue regeneration strategies.
Asunto(s)
Células Madre Mesenquimatosas , Polivinilos , Propiedades de Superficie , Polivinilos/química , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/metabolismo , Células Madre Mesenquimatosas/efectos de los fármacos , Animales , Colágeno Tipo I/metabolismo , Colágeno Tipo I/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Adhesión Celular/efectos de los fármacos , Electricidad Estática , Polímeros de FluorocarbonoRESUMEN
Since neurons were first cultured outside a living organism more than a century ago, a number of experimental techniques for their in vitro maintenance have been developed. These methods have been further adapted and refined to study specific neurobiological processes under controlled experimental conditions. Despite their limitations, the simplicity and visual accessibility of 2D cultures have enabled the study of the effects of trophic factors, adhesion molecules, and biophysical stimuli on neuron function and morphology. Nevertheless, the impact of fundamental properties of the surfaces to which neurons adhere when cultured in vitro has not been sufficiently considered. Here, we used an electroactive polymer with different electric poling states leading to different surface charges to evaluate the impact of the net electric surface charge on the behavior of primary neurons. Average negative and positive surface charges promote increased metabolic activity and enhance the maturation of primary neurons, demonstrating the relevance of considering the composition and electric charge of the culture surfaces. These findings further pave the way for the development of novel therapeutic strategies for the regeneration of neural tissues, particularly based on dynamic surface charge variation that can be induced in the electroactive films through mechanical solicitation.
Asunto(s)
Neuronas , PolímerosRESUMEN
Natural killer (NK) cells are lymphocytes of the innate immune system that play a key role in the elimination of tumor and virus-infected cells. Unlike T cells, NK cell activation is governed by their direct interaction with target cells via the inhibitory and activating receptors present on their cytoplasmic membrane. The simplicity of this activation mechanism has allowed the development of immunotherapies based on the transduction of NK cells with CAR (chimeric antigen receptor) constructs for the treatment of cancer. Despite the advantages of CAR-NK therapy over CAR-T, including their inability to cause graft-versus-host disease in allogenic therapies, a deeper understanding of the impact of their handling is needed in order to increase their functionality and applicability. With that in mind, the present work critically examines the steps required for NK cell isolation, expansion and storage, and analyze the response of the NK cells to these manipulations. The results show that magnetic-assisted cell sorting, traditionally used for NK isolation, increases the CD16+ population of NK cultures only if the protocol includes both, antibody incubation and passage through the isolation column. Furthermore, based on the importance of surface potential on cellular responses, the influence of surfaces with different net surface charge on NK cells has been evaluated, showing that NK cells displayed higher proliferation rates on charged surfaces than on non-charged ones. The present work highlights the relevance of NK cells manipulation for improving the applicability and effectiveness of NK cell-based therapies.
Asunto(s)
Células Asesinas Naturales , Receptores Quiméricos de Antígenos , Anticuerpos , Membrana Celular , Separación Celular , Tratamiento Basado en Trasplante de Células y TejidosRESUMEN
The dynamic rearrangement of the actin cytoskeleton plays a key role in several cellular processes such as cell motility, endocytosis, RNA processing and chromatin organization. However, the supramolecular actin structures involved in the different processes remain largely unknown. One of the less studied forms of actin is the lower dimer (LD). This unconventional arrangement of two actin molecules in an antiparallel orientation can be detected by chemical crosslinking at the onset of polymerization in vitro. Moreover, evidence for a transient incorporation of LD into growing filaments and its ability to inhibit nucleation of F-actin filament assembly implicate that the LD pathway contributes to supramolecular actin patterning. However, a clear link from this actin species to a specific cellular function has not yet been established. We have developed an antibody that selectively binds to LD configurations in supramolecular actin structures assembled in vitro. This antibody allowed us to unveil the LD in different mammalian cells. In particular, we show an association of the antiparallel actin arrangement with the endocytic compartment at the cellular and ultrastructural level. Taken together, our results strongly support a functional role of LD in the patterning of supramolecular actin assemblies in mammalian cells.
Asunto(s)
Citoesqueleto de Actina/ultraestructura , Actinas/química , Actinas/ultraestructura , Mamíferos/metabolismo , Citoesqueleto de Actina/química , Animales , Línea Celular , Movimiento Celular , Endocitosis , Técnica del Anticuerpo Fluorescente/métodos , Células HeLa , Humanos , Microscopía Electrónica de Transmisión de Rastreo , Microscopía Inmunoelectrónica/métodos , Modelos Moleculares , Células PC12 , Polímeros/química , Estructura Terciaria de Proteína , Conejos , RatasRESUMEN
Cell transplantation into the seminiferous tubules is a useful technique for the study of physiological and pathological conditions affecting the testis. However, the precise three-dimensional organization and, particularly, the complex connectivity of the seminiferous network have not yet been thoroughly characterized. To date, the technical approaches to address these issues have included manual dissection under the stereomicroscope, reconstruction of histological serial sections, and injection of contrast dyes, but all of them have yielded only partial information. Here, using an approach based on the microinjection of a self-polymerizing resin followed by chemical digestion of the surrounding soft tissues, we reveal fine details of the seminiferous tubule scaffold and its connections. These replicas of the testis seminiferous network were studied by scanning electron microscopy. The present results not only establish a morphological basis for more precise microinjection into the mouse seminiferous tubules but also enable a more profound investigation of physiological and embryological features of the testis.
Asunto(s)
Trasplante de Células , Ratones , Túbulos Seminíferos/anatomía & histología , Testículo/anatomía & histología , Animales , Colorantes/administración & dosificación , Molde por Corrosión/veterinaria , Masculino , Microinyecciones , Microscopía Electrónica de Rastreo , Polímeros , Resinas Sintéticas/administración & dosificación , Testículo/embriología , Testículo/fisiologíaRESUMEN
Three-dimensional (3D) printing represents a suitable technology for the development of biomimetic scaffolds for biomedical and tissue engineering applications. However, hydrogel-based inks' printability remains a challenge due to their restricted print accuracy, mechanical properties, swelling or even cytotoxicity. Chitosan is a natural-derived polysaccharide that has arisen as a promising bioink due to its biodegradability, biocompatibility, sustainability and antibacterial properties, among others, as well as its ability to form hydrogels under the influence of a wide variety of mechanisms (thermal, ionic, pH, covalent, etc.). Its poor solubility at physiological pH, which has traditionally restricted its use, represents, on the contrary, the simplest way to induce chitosan gelation. Accordingly, herein a NaOH strong base was employed as gelling media for the direct 3D printing of chitosan structures. The obtained hydrogels were characterized in terms of morphology, chemical interactions, swelling and mechanical and rheological properties in order to evaluate the influence of the gelling solution's ionic strength on the hydrogel characteristics. Further, the influence of printing parameters, such as extrusion speed (300, 600 and 800 mm/min) and pressure (20-35 kPa) and the cytocompatibility were also analyzed. In addition, printed gels show an electro-induced motion due to their polycationic nature, which highlights their potential as soft actuators and active scaffolds.
RESUMEN
In situ-forming, biodegradable, and self-healing hydrogels, which maintain their integrity after damage, owing to dynamic interactions, are essential biomaterials for bioapplications, such as tissue engineering and drug delivery. This work aims to develop in situ, biodegradable and self-healable hydrogels based on dynamic covalent bonds between N-succinyl chitosan (S-CHI) and oxidized aldehyde hyaluronic acid (A-HA). A robust effect of the molar ratio of both S-CHI and A-HA was observed on the swelling, mechanical stability, rheological properties and biodegradation kinetics of these hydrogels, being the stoichiometric ratio that which leads to the lowest swelling factor (×12), highest compression modulus (1.1·10−3 MPa), and slowest degradation (9 days). Besides, a rapid (3 s) self-repairing ability was demonstrated in the macro scale as well as by rheology and mechanical tests. Finally, the potential of these biomaterials was evidenced by cytotoxicity essay (>85%).
RESUMEN
Biocompatible and biodegradable hydrogels with biomimetic properties, such as self-repairing, are increasingly interesting for biomedical applications, particularly when they can be printed or in situ formed to mimic extracellular matrix or as personalized implantable devices in tissue regeneration or drug delivery. Photocrosslinkable hydrogels based on methacrylated chitosan (CHIMe) and hyaluronic acid that exhibit according with their composition, tuneable physico-chemical properties are here presented. The study of the conversion, gelation time, mechanical and rheological properties of photopolymerized CHIMe showed an optimal phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) initiator feed (0.1 % w). These photocrosslinkable hydrogels demonstrated being able to promote doubly crosslinked hydrogels with similar Young Moduli regardless the cycles of self-healing processes, and tailored swelling (25-70 swelling factor), mechanical (1 × 10-4-2 × 10-2 MPa) and rheological properties, as a function of polysaccharides relative content. Clear evidences have been found that fast photopolymerization of CHIMe/HA solutions leads to biocompatible (>80 % cell viability), biodegradable (20-24 days in hydrolytic medium) and robust self-healable hydrogels suitable for advanced biomedical and tissue engineering applications.
Asunto(s)
Quitosano , Hidrogeles , Quitosano/química , Matriz Extracelular , Ácido Hialurónico/química , Hidrogeles/química , Ingeniería de TejidosRESUMEN
Soft materials are attracting much attention for the development of biostructures able to mimic the movement of natural systems by remote actuation. Multi-sensitive hydrogels are among the best materials for obtaining dynamic and biocompatible soft structures for soft actuators and related biomedical devices. Nevertheless, bioinks based on naturally occurring and stimuli responsive hydrogels able to be 3D printed continues being a challenge for advanced applications. In this work 3D printable electrically and magnetically responsive, non-cytotoxic, hybrid hydrogels based on alginate and zero monovalent iron nanoparticles (NPs) are presented. The effect of NPs addition on the physico-chemical properties of the hydrogels is addressed, together with its effect on the functional electroactive and magnetoactive response. NPs concentration up to 10 % do not affect the mechanical stability of the gels, while promoting an increase actuation response.
Asunto(s)
Hidrogeles , Nanopartículas , Alginatos/química , Hidrogeles/química , HierroRESUMEN
Tissue engineering (TE) aims to develop structures that improve or even replace the biological functions of tissues and organs. Mechanical properties, physical-chemical characteristics, biocompatibility, and biological performance of the materials are essential factors for their applicability in TE. Poly(vinylidene fluoride) (PVDF) is a thermoplastic polymer that exhibits good mechanical properties, high biocompatibility and excellent thermal properties. However, PVDF structuring, and the corresponding processing methods used for its preparation are known to significantly influence these characteristics. In this study, doctor blade, salt-leaching, and electrospinning processing methods were used to produce PVDF-based structures in the form of films, porous membranes, and fiber scaffolds, respectively. These PVDF scaffolds were subjected to a variety of characterizations and analyses, including physicochemical analysis, contact angle measurement, cytotoxicity assessment and cell proliferation. All prepared PVDF scaffolds are characterized by a mechanical response typical of ductile materials. PVDF films displayed mostly vibration modes for the a-phase, while the remaining PVDF samples were characterized by a higher content of electroactive ß-phase due the low temperature solvent evaporation during processing. No significant variations have been observed between the different PVDF membranes with respect to the melting transition. In addition, all analysed PVDF samples present a hydrophobic behavior. On the other hand, cytotoxicity assays confirm that cell viability is maintained independently of the architecture and processing method. Finally, all the PVDF samples promote human umbilical vein endothelial cells (HUVECs) proliferation, being higher on the PVDF film and electrospun randomly-oriented membranes. These findings demonstrated the importance of PVDF topography on HUVEC behavior, which can be used for the design of vascular implants.
RESUMEN
Multifunctional printable biomaterials are at the base of advanced biomedical applications. Chitosan (CHI) and hyaluronic acid (HA) allow the development of polycomplex hydrogels with tailorable properties, including self-healing and controlled drug release. This work correlates and optimizes the mucoadhesive, swelling, biodegradation, mechanical and rheological properties of HA/CHI polycomplex hydrogels with synthesis parameters such as polysaccharide content and complexation time, according to the interaction forces established between both polyelectrolytes. Related to these dynamic forces, the self-healing ability of the hydrogels was investigated together with the potential of the HA/CHI polycomplex hydrogels for 3D printing. Finally, their capability to modulate and promote controlled release of a variety of drugs (anionic and anti-inflammatory sodium diclofenac and the neutral antibiotic rifampicin) was demonstrated. Thus, the reported tunable properties, self-repair ability, printability and drug release properties, demonstrate the suitability of HA/CHI hydrogels for advanced biomedical applications.