Adropin, a novel hepatokine: localization and expression during postnatal development and its impact on testicular functions of pre-pubertal mice.

Adropin, a multifaceted peptide, was identified as a new metabolic hormone responsible for regulating gluco-lipid homeostasis. However, its role in the testicular function is not yet understood. We aimed to investigate the localization and expression of adropin and GPR19 during different phases of postnatal development. Immunohistochemical study revealed the intense reactivity of adropin in the Leydig cells during all phases of postnatal development, while GPR19 showed intense immunoreactivity in the pachytene spermatocytes and mild immunoreactivity in Leydig cells as well as primary and secondary spermatocytes. Western blot study revealed maximum expression of GPR19 in pre-pubertal mouse testis that clearly indicates maximum responsiveness of adropin during that period. So, we hypothesized that adropin may act as an autocrine/paracrine factor that regulates pubertal changes in mouse testis. To examine the effect of adropin on pubertal onset, we gave bilateral intra-testicular doses (0.5 and 1.5 µg/testis) to pre-pubertal mice. Adropin treatment promoted testicular testosterone synthesis by increasing the expression of StAR, 3ß-HSD, and 17ß-HSD. Adropin also promoted germ cell survival and proliferation by upregulating the expression of PCNA and downregulating the Bax/Bcl2 ratio and Caspase 3 expression resulting in fewer TUNEL-positive cells in adropin-treated groups. FACS analysis demonstrated that adropin treatment not only increases 1C to 4C ratio but also significantly increases the 1C (spermatid) and 1C to 2C ratio which demarcates accelerated germ cell differentiation and turnover of testicular cells. In conclusion, adropin promotes steroidogenesis, germ cell survival, as well as the proliferation in the pre-pubertal mouse testis that may hasten the pubertal transition in an autocrine/paracrine manner.

Interactions of Turmeric- and Curcumin-Functionalized Gold Nanoparticles with Human Serum Albumin: Exploration of Protein Corona Formation, Binding, Thermodynamics, and Antifibrillation Studies.

In order to better understand the bioavailability and biocompatibility of polyphenol-assisted surface-modified bioengineered nanoparticles in nanomedicine applications, here, we address a series of photophysical experiments to quantify the binding affinity of serum albumin toward polyphenol-capped gold nanoparticles. For this, two different gold nanoparticles (AuNPs) were synthesized via the green synthesis approach, where curcumin and turmeric extract act as reducing as well as capping agents. The size, surface charge, and surface plasmon bands of the AuNPs were highly affected by the adsorption of human serum albumin (HSA) during protein corona formation, which was investigated using dynamic light scattering (DLS), ξ-potential, ultraviolet-visible (UV-vis) spectroscopy, and transmission electron microscopy (TEM) measurements. Fluorescence-based methods, absorbance, and SERS experiments were carried out to evaluate the binding aspects of AuNPs with HSA. We found that the AuNPs show moderate binding affinity toward HSA (Kb ∼ 104 M-1), irrespective of the capping agents on the surface. Hydrophobic association, along with some contribution of electrostatic interaction, played a key role in the binding process. The binding interaction was more toward the subdomain IIA region of HSA, as indicated by the competitive displacement studies using site-specific binders (warfarin and flufenamic acid). Because of the large surface curvature of small-sized AuNPs, the secondary structural conformations of HSA were slightly altered, as revealed by circular dichroism (CD), Fourier transform infrared (FT-IR) spectroscopy, and surface-enhanced Raman scattering (SERS) measurements. Additionally, the findings of the binding interactions were re-evaluated using molecular dynamics (MD) simulation studies by determining the root-mean-square deviation (RMSD), root-mean-square fluctuation (RMSF), radius of gyration (Rg), and changes in the binding energy of HSA upon complexation with AuNPs. To determine the tentative evidence for pharmacokinetic administration, these biocompatible AuNPs were applied to inhibit the amyloid fibril formation of HSA and monitored by using the thioflavin T (ThT) assay, ANS fluorescence assay, fluorescence microscopic imaging, and FESEM. AuNPs were found to show better resistance toward fibrillation of the adsorbed protein.

Novel amino- and hydroxy-functionalized 1,2,4-trioxanes and their antimalarial activity against multidrug-resistant Plasmodium yoelii nigeriensis in Swiss mice via intramuscular and oral route.

Following the economic and social state of humanity, Malaria is categorized as one of the life-threatening illness epidemics in under developed countries. For the eradication of the same, 1,2,4-trioxanes 17a1-a2, 17b1-b2, 17c1-c2 15a-c, 18 and 19 have been synthesized continuing the creation of a novel series. Additionally, these novel compounds were tested for their effectiveness against the multidrug-resistant Plasmodium yoelii nigeriensis in mice model using both oral and intramuscular (im) administration routes. The two most potent compounds of the series, 17a1 and 17a2, demonstrated 100 % protection at 48 mg/kg x 4 days via oral route, which is twice as potent as artemisinin. In this model artemisinin provided 100 % protection at a dose of 48 mg/kg × 4 days and 80 % protection at 24 mg/kg × 4 days via im route.

Status of visfatin in female reproductive function under normal and pathological conditions: a mini review.

Adipokines are now well-known to regulate reproduction. Visfatin is an adipokine expressed in the hypothalamus, pituitary, ovary, uterus, and placenta of different species, and since it has been found to modulate the endocrine secretion of the hypothalamus, pituitary gland and ovary, it may be considered a novel regulator of female reproduction. Although the majority of the literature explored its role in ovarian regulation, visfatin has also been shown to regulate uterine remodeling, endometrial receptivity and embryo development, and its expression in the uterus is steroid dependent. Like other adipokines, visfatin expression and levels are deregulated in pathological conditions including polycystic ovary syndrome. Thus, the present mini-review focuses on the role of visfatin in female reproduction under both physiological and pathological conditions.

Phenotypic and genetic characterization of unexplored, potential cattle population of Madhya Pradesh.

Bawri or Garri, a non-descript cattle population managed under an extensive system in Madhya Pradesh state of India, was identified and characterized both genetically and phenotypically to check whether or not it can be recognised as a breed. The cattle have white and gray colour and are medium sized with 122.5 ± 7.5 cm and 109.45 ± 0.39 cm height at withers in male and female, respectively. Double-digest restriction site associated DNA (ddRAD) sequencing was employed to identify ascertainment bias free SNPs representing the entire genome cost effectively; resulting in calling 1,156,650 high quality SNPs. Observed homozygosity was 0.76, indicating Bawri as a quite unique population. However, the inbreeding coefficient was 0.025, indicating lack of selection. SNPs found here can be used in GWAS and genetic evaluation programs. Considering the uniqueness of Bawri cattle, it can be registered as a breed for its better genetic management.

Promoting sustainable packaging applications in the circular economy by exploring and advancing molded pulp materials for food products: a review.

Packaging ensures the safe handling and distribution of fresh and processed food products via diverse supply chains, and has become an indispensable component of the food industry. However, the rapidly expanding use of plastics, especially single-use plastics, as packaging material leads to inadequate waste management, littering, and consequently serious environmental damage, which predominantly affects marine and freshwater sources. Thus, the use of plastics for packaging purposes has become a major public concern and hence a concern among global policymakers. Notably, 26% of the total volume of global plastic production is primarily used for packaging, of which single-use plastics account for 50%, resulting in pollution that may last hundreds of years. This review provides an overview of the manner in which molded pulp products can be utilized to improve sustainability of food packaging applications, by highlighting the manufacturing processes, signifying characteristics features of recyclable molded pulp, and coupling circularity with eco-friendly and safe food product packaging. In this regard, current concepts advocate the implementation of a dynamic and sustainable approach using molded pulp products. This approach encompasses the design and production of eco-friendly packaging, distribution and consumption of packaged products, and collection and recycling of used packaging for subsequent reuse.

Exploring Ligand-Controlled C2 Product Selectivity in Carbon Dioxide Reduction with Copper Metal-Organic Framework Nanosheets.

The suitable choice of an electrocatalyst is crucial in controlling the selectivity of electrocatalytic CO2 reduction products. Herein, we have explored the effect of different ligand environments in 2D metal-organic frameworks (MOFs), viz., copper naphthalenedicarboxylate (Cu-UNDC) and copper benzenedicarboxylate (Cu-UBDC). The change of ligand modulates the structure of the MOFs as well as the electronic environment around the copper center. The variation in the electronic structure and the coordination environment of the active Cu center changes the selectivity toward C2 products. In the electrocatalytic process, Cu-UNDC produced 24.3% Faradaic efficiency (FE) for the C2 products─far better than that of Cu-UBDC (13.2%). In contrast to electrocatalytic CO2RR, in the presence of light, Cu-UBDC (26.2%) achieved a better FE for the C2 products than Cu-UNDC (21.8%).

C-H Bond Activation by an Antimony(V) Oxo Intermediate Accessed through Electrochemical Oxidation of Antimony(III) Tetrakis(thiocyano)corrole.

A new class of antimony(III) corroles has been described. The photophysical properties of these newly synthesized tetrakis(thiocyano)corrolatoantimony(III) derivatives having four SCN groups on the bipyrrole unit of corrole are drastically altered compared to their ß-unsubstituted corrolatoantimony(III) analogues. The UV-vis and emission spectra of tetrakis(thiocyano)corrolatoantimony(III) derivatives are significantly red-shifted (roughly 30-40 nm) in comparison with their ß-unsubstituted corrolatoantimony(III) derivatives. The Q bands are significantly strengthened. The intensity of the most prominent Q band is roughly 70% that of the Soret band and absorbs strongly at the far-red region, i.e., at 700-720 nm. These molecules emit light in the near-infrared region (700-900 nm). Tetrakis(thiocyano)corrolatoantimony(III) undergoes electrochemical anodic oxidation to form SbV═O species, which facilitates electrocatalytic oxygen evolution reaction (OER) and the activation of benzylic C-H to produce benzoic acid selectively. Under optimized conditions, SbIII-corrole@NF (NF = nickel foam) required an overpotential of 380 mV to reach a 50 mA cm-2 current density, comparable with those of other transition-metal-based complexes. On the other hand, replacing the anodic OER with benzyl alcohol oxidation lowered the required potential by 150 mV (at 300 mA cm-2) to improve the energy efficiency of the electrochemical process.

Molecular and genetic diversity in isolates of Trypanosoma evansi from naturally infected horse and dogs by using RoTat 1.2 VSG gene in Madhya Pradesh, India.

BACKGROUND: Trypanosoma evansi is a protozoan parasite that can infect a wide range of animals and is widespread around the world. In this study, we analyzed four fatal cases of T. evansi infection using clinical, parasitological, and molecular approaches. We also explored the genetic diversity, demographic history, and population-genetic structure of T. evansi using available Rode Trypanozoon antigenic type (RoTat) 1.2 gene sequences. METHODS AND RESULTS: Clinical findings of infected animals revealed high fever, anemia, weakness, and anorexia. The animals were treated with diminazene aceturate, which was moderately effective, and hematobiochemical parameters showed changes in hemoglobin and glucose levels. The molecular and genetic diversity of T. evansi was analyzed using the RoTat 1.2 VSG gene. Phylogenetic and haplotype analysis revealed two distinct clusters of T. evansi circulating in India. The genetic diversity indices, neutrality tests, gene flow, and genetic differentiation outcomes confirmed the genetic diversity of the T. evansi population, with a lack of uniformity. The identification of two distinct clusters, exhibiting differential demographic histories and evolutionary forces, implies that the clusters may have undergone independent evolutionary trajectories or experienced different environmental pressures. CONCLUSION: The present findings underlined the need of an early and precise diagnosis in order to treat and control T. evansi infections, and the RoTat 1.2 VSG gene is an important genetic marker for understanding the genetic diversity and evolutionary history of T. evansi. This knowledge can be used to create tailored strategies to control and manage the infection in an endemic region.

Efficacy and safety of fixed-dose combination of Bilastine-Montelukast in adult patients with allergic rhinitis: a phase III, randomized, multi-center, double-blind, active controlled clinical study.

BACKGROUND: Histamine and cysteinyl leukotrienes (CysLTs) are potent inflammatory mediators in allergic rhinitis (AR). Studies involving other combinations of antihistaminics (Levocetirizine) and highly selective leukotriene receptor antagonist (LTA) (Montelukast) combination have shown additive benefits and are widely prescribed for AR. OBJECTIVE: Evaluate the efficacy and safety of Bilastine 20 mg and Montelukast 10 mg fixed-dose combination (FDC) therapy in patients with AR. METHODS: A randomized, double-blind, comparative, parallel, phase III study was conducted to evaluate efficacy and safety of Bilastine 20 mg and Montelukast 10 mg FDC at 16 tertiary care otolaryngology centres in India. Adult patients with AR for one year with IgE antibody positive and 12-h NSS score >36 in 3 days were randomized to receive either Bilastine 20 mg and Montelukast 10 mg or Montelukast 10 mg & Levocetirizine 5 mg tablets for 4 weeks. The change in total symptom score (nasal symptom scores (NSS) & non-nasal symptom scores (NNSS)) from baseline to week 4 was assessed as primary endpoint. Secondary endpoints included changes in TSS, NSS, NNSS, individual symptom scores (ISS), Rhinoconjunctivitis Quality of Life (RQLQ), discomfort due to rhinitis (VAS), and clinical global impression (CGI) scores. RESULTS: The change in mean TSS from baseline to week 4 in Test group (16.6 units) was comparable to reference group (17 units) (p= 0.8876). The difference in change in mean NSS, NNSS and ISS from baseline to day 7, 14, 28 were comparable. RQLQ improved from baseline to Day 28. Significant improvements were observed in discomfort due to AR measured by VAS and CGI scores from baseline to day 14 and 28. The safety and tolerability of patients were comparable between the groups. All adverse events (AEs) were mild to moderate in severity. No patient discontinued due to AEs. CONCLUSIONS: The FDC of Bilastine 20 mg and Montelukast 10 mg was efficacious and well tolerated in Indian patients with AR.

First report of Klebsiella Leaf Streak on Sorghum Caused by Klebsiella variicola in Haryana, India.

Sorghum (Sorghum bicolor [L.] Moench) is one of the top ten cereal crops in the world and is grown for fodder and seed purposes. During the fall of 2019 to 2022, a disease causing small to long streaks on leaves was observed in sorghum fields of Hisar (29° 9' 6.6996'' N, 75° 43' 16.0428'' E), Rohtak (28° 53' 43.8540'' N, 76° 36' 23.8068'' E) and Mohindergarh (28° 16' 6.0492'' N, 76° 9' 3.3552'' E) regions of Haryana between July and October. The reddish brown streaks were observed in the interveinal spaces of upper and lower leaves. The disease incidence reached 20-30% of plants in affected fields. The diseased leaf tissues were disinfected with 70% alcohol and placed in a tube with sterile water. After 30 minutes, 100 µl of the suspension was inoculated onto nutrient agar medium, incubated at 28 ± 2°C for three days, and a pure culture was obtained by restreaking on nutrient agar (Janse, 2005). The rod-shaped gram-negative bacterium with round, cream to white colonies was positive for methyl red, citrate utilization, urease activity, and glucose, lactose, sorbitol, rhamnose and sucrose fermentation tests. The genomic DNA of the bacterial suspension was extracted and 16S rDNA was amplified using universal 27F/1492R primers (Marchesi et al. 1998), resulting in tentative identification as Klebsiella sp. It was further confirmed with PCR amplification of Klebsiella specific primers (F:5'-CGCGTACTATACGCCATGAACGTA-3'; R:5'-ACCGTTGATCACTTCGGTCAGG-3') for gyrA gene (Brisse and Verhoef 2001). Discrete PCR amplicons of 1,500 (16S rDNA) and 300 bp (gyrA) were observed in a 1% (w/v) agarose gel. Forward and reverse DNA sequencing of both amplicons of the Hisar isolate (VMKV101) was carried out using a BDT v3.1 Cycle sequencing kit and consensus sequences were generated by using the program SeqMan Ultra (DNASTAR Lasergene). Sequences of the PCR products were deposited in GenBank with accession numbers MZ569433 (16S rDNA) and OP390080 (gyrA). The 16S rDNA sequence was 97.32% similar to K. variicola strain 13450 (CP026013; 1,450/1,490 bp) and the gyrA sequence had 99.66% similarity to K. variicola strain FH-1 (CP054254; 297/298 bp). A 16S RNA-based phylogenetic tree done by MEGA11 (Tamura et al. 2021) using the Maximum Likelihood method showed that strain VMKV101 clustered with K. variicola type strain F2R9. The complete bacterial genome (GCA025629215), sequenced by the Ion GeneStudio S5 system using Ion 530 chips (Thermo Fisher Scientific), was 99.03% identical by average nucleotide identity (ANI) to the type genome (CP045783) of Klebsiella variicola, with 87.8% genome coverage. For pathogenicity testing, a bacterial suspension (10 ml, 1×107 colony forming units/ml) was injected into the whole whorl after mechanical injury on 15-20 days old seedlings of the susceptible genotype HC-171, then plants were incubated at 35 ± 2°C, >80% relative humidity. Control plants were injected with sterile distilled water. Initial symptoms were observed on leaves of inoculated plants after 5 to 7 days as narrow, small longitudinal reddish brown streaks. As the disease progressed, the streaks on the leaf blade increased in number and size maintaining the reddish brown color. These streaks had slightly wavy margins and were surrounded by bright yellow halos. After 15 to 20 days, the streaks were 0.5 to 2.0 mm wide and 1.0 to 5.0 cm long, occasionally up to 10.0 cm long on both side of the leaves. Over time, neighboring streaks coalesced to form large necrotic areas. All inoculated plants exhibited identical symptoms. No symptoms were observed on control leaves. The reisolated bacterium from diseased sorghum leaves showed exactly the same morphological, biochemical and 16S RNA and gyrA molecular characteristics. To our knowledge, this is the first report of K. variicola causing a leaf streak disease on sorghum. Klebsiella species primarily cause diseases in humans and animals, but K. variicola has been found to incite banana soft rot (Fan et al. 2015) and K. aerogenes to cause stem rot in pearl millet (Malik et al. 2022). Differences of prevalence, spread and control between K. variicola and two other bacteria (Xanthomonas vasicola pv. holcicola causing Bacterial leaf streak; Paraburkholderia andropogonis causing Bacterial leaf stripe) causing leaf streak diseases on sorghum need to be determined. The identification of Klebsiella leaf streak disease lays the groundwork for future investigations into epidemiology and management of K. variicola on sorghum.

Low-Loss Paper-Substrate Triple-Band-Frequency Reconfigurable Microstrip Antenna for Sub-7 GHz Applications.

In this paper, a low-cost resin-coated commercial-photo-paper substrate is used to design a printed reconfigurable multiband antenna. The two PIN diodes are used mainly to redistribute the surface current that provides reconfigurable properties to the proposed antenna. The antenna size of 40 mm × 40 mm × 0.44 mm with a partial ground, covers wireless and mobile bands ranging from 1.91 GHz to 6.75 GHz. The parametric analysis is performed to achieve optimized design parameters of the antenna. The U-shaped and C-shaped emitters are meant to function at 2.4 GHz and 5.9 GHz, respectively, while the primary emitter is designed to operate at 3.5 GHz. The proposed antenna achieved peak gain and radiation efficiency of 3.4 dBi and 90%, respectively. Simulated and measured results of the reflection coefficient, radiation pattern, gain, and efficiency show that the antenna design is in favorable agreement. Since the proposed antenna achieved wideband (1.91-6.75 GHz) using PIN diode configuration, using this technique the need for numerous electronic components to provide multiband frequency is avoided.

Quad Element MIMO Antenna for C, X, Ku, and Ka-Band Applications.

This article presents a quad-element MIMO antenna designed for multiband operation. The prototype of the design is fabricated and utilizes a vector network analyzer (VNA-AV3672D) to measure the S-parameters. The proposed antenna is capable of operating across three broad frequency bands: 3-15.5 GHz, encompassing the C band (4-8 GHz), X band (8-12.4 GHz), and a significant portion of the Ku band (12.4-15.5 GHz). Additionally, it covers two mm-wave bands, specifically 26.4-34.3 GHz and 36.1-48.9 GHz, which corresponds to 86% of the Ka-band (27-40 GHz). To enhance its performance, the design incorporates a partial ground plane and a top patch featuring a dual-sided reverse 3-stage stair and a straight stick symmetrically placed at the bottom. The introduction of a defected ground structure (DGS) on the ground plane serves to provide a wideband response. The DGS on the ground plane plays a crucial role in improving the electromagnetic interaction between the grounding surface and the top patch, contributing to the wideband characteristics of the antenna. The dimensions of the proposed MIMO antenna are 31.7 mm × 31.7 mm × 1.6 mm. Furthermore, the article delves into the assessment of various performance metrics related to antenna diversity, such as ECC, DG, TARC, MEG, CCL, and channel capacity, with corresponding values of 0.11, 8.87 dB, -6.6 dB, ±3 dB, 0.32 bits/sec/Hz, and 18.44 bits/sec/Hz, respectively. Additionally, the equivalent circuit analysis of the MIMO system is explored in the article. It's worth noting that the measured results exhibit a strong level of agreement with the simulated results, indicating the reliability of the proposed design. The MIMO antenna's ability to exhibit multiband response, good diversity performance, and consistent channel capacity across various frequency bands renders it highly suitable for integration into multi-band wireless devices. The developed MIMO system should be applicable on n77/n78/n79 5G NR (3.3-5 GHz); WLAN (4.9-5.725 GHz); Wi-Fi (5.15-5.85 GHz); LTE5537.5 (5.15-5.925 GHz); WiMAX (5.25-5.85 GHz); WLAN (5.725-5.875 GHz); long-distance radio telecommunication (4-8 GHz; C-band); satellite, radar, space communications and terrestrial broadband (8-12 GHz; X-band); and various satellite communications (27-40 GHz; Ka-band).

ApoE3 Anchored Liposomal Delivery of Rivastigmine for Brain Delivery: Formulation, Characterization, and In Vivo Pharmacokinetic Evaluation.

Rivastigmine hydrogen tartrate (RHT) is an acetylcholinesterase (AChE) inhibitor used in the management of Alzheimer's disease (AD). RHT is a BCS class-I drug that undergoes significant first-pass metabolism. Permeating a hydrophilic drug through the brain remains a major challenge in brain delivery. In this study, the RHT was incorporated inside the hydrophilic core of liposomes (LPS) and then coated with the ApoE3. ApoE3-coated RHT-loaded liposomes (ApoE3-RHT-LPS) were fabricated through the thin film hydration method using DSPE-PEG. The coating of LPS with ApoE3 enhances brain uptake and improves Aß clearance. The results obtained from the physicochemical characterization demonstrated that ApoE3-RHT-LPS shows a particle size of 128.6 ± 2.16 nm and a zeta potential of 16.6 ± 1.19. The % entrapment efficiency and % drug loading were found to be 75% and 17.84%, respectively. The data obtained from TEM and SEM studies revealed that the particle size of the LPS was less than 200 nm. An in vitro AChE assay was performed, and the results demonstrated the AChE inhibitory potential of ApoE3-RHT-LPS. Through the intravenous route, an in vivo pharmacokinetic study of formulation displayed improved brain uptake of RHT by ~ 1.3-fold than pure RHT due to ApoE3 coating. In vivo, biodistribution studies in vital organs suggested that the biodistribution of RHT to the liver was significantly reduced (p < 0.001), signifying an increase in the drug's half-life and blood circulation time. All research findings suggested that ApoE3 coating and LPS strategy are proven effective for improving the brain uptake of RHT designed for the management of AD.

The impact of COVID-19 public health restrictions on particulate matter pollution measured by a validated low-cost sensor network in Oxford, UK.

Emergency responses to the COVID-19 pandemic led to major changes in travel behaviours and economic activities with arising impacts upon urban air quality. To date, these air quality changes associated with lockdown measures have typically been assessed using limited city-level regulatory monitoring data, however, low-cost air quality sensors provide capabilities to assess changes across multiple locations at higher spatial-temporal resolution, thereby generating insights relevant for future air quality interventions. The aim of this study was to utilise high-spatial resolution air quality information utilising data arising from a validated (using a random forest field calibration) network of 15 low-cost air quality sensors within Oxford, UK to monitor the impacts of multiple COVID-19 public heath restrictions upon particulate matter concentrations (PM10, PM2.5) from January 2020 to September 2021. Measurements of PM10 and PM2.5 particle size fractions both within and between site locations are compared to a pre-pandemic related public health restrictions baseline. While average peak concentrations of PM10 and PM2.5 were reduced by 9-10 µg/m3 below typical peak levels experienced in recent years, mean daily PM10 and PM2.5 concentrations were only ∼1 µg/m3 lower and there was marked temporal (as restrictions were added and removed) and spatial variability (across the 15-sensor network) in these observations. Across the 15-sensor network we observed a small local impact from traffic related emission sources upon particle concentrations near traffic-oriented sensors with higher average and peak concentrations as well as greater dynamic range, compared to more intermediate and background orientated sensor locations. The greater dynamic range in concentrations is indicative of exposure to more variable emission sources, such as road transport emissions. Our findings highlight the great potential for low-cost sensor technology to identify highly localised changes in pollutant concentrations as a consequence of changes in behaviour (in this case influenced by COVID-19 restrictions), generating insights into non-traffic contributions to PM emissions in this setting. It is evident that additional non-traffic related measures would be required in Oxford to reduce the PM10 and PM2.5 levels to within WHO health-based guidelines and to achieve compliance with PM2.5 targets developed under the Environment Act 2021.

Flood risk assessment in the Karamana river basin, Kerala, using HEC-RAS.

The State of Kerala has frequently been facing a series of flooding phenomena that have adversely affected its multiple sectoral growths. The floods of 2018 have happened to be one of the most devastating floods that have occurred in the State of Kerala. It was seen that nearly thirteen out of fourteen districts in Kerala were tremendously affected during the 2018 August floods. The worst affected districts during the 2018 floods were Trivandrum, Pathanamthitta, Idukki, Thrissur, Ernakulam, and Kottayam. A sub-region near the Karamana basin located in the Trivandrum district is considered for the present study. The Karamana sub-region is a highly urbanized area that is also more or less prone to intense riverine flooding. The major rivers-Karamana and Killi-along with their respective tributaries, are the water bodies in the study region. Extensive urbanization, along with the overflowing of rivers during monsoon seasons, has paved the way for intense flooding in the region. This, in turn, necessitates developing a flood model for the sub-region. The development of an efficient flood model will aid in understanding the future challenges related to a flooding event in a region. In this study, the flood return probability water levels for the 5-year, 10-year, 25-year, 50-year, 100-year, 250-year, and 500-year were estimated for the Karamana sub-region. Besides, the flood risk zoning for the study area was conducted and elaborated as very high risk, high risk, moderate risk, and low risk for the different areas of the sub-region. Overall, the study can be helpful in identifying the most vulnerable areas to flooding in the Karamana region. By the proper identification of vulnerable areas in the region, proper planning and early warning measures can be devised and carried out by policymakers.

Use of machine learning-based classification algorithms in the monitoring of Land Use and Land Cover practices in a hilly terrain.

The current high rate of urbanization in developing countries and its consequences, like traffic congestion, slum development, scarcity of resources, and urban heat islands, raise a need for better Land Use Land Cover (LULC) classification mapping for improved planning. This study mainly deals with two objectives: 1) to explore the applicability of machine learning-based techniques, especially the Random forest (RF) algorithm and Support Vector Machine (SVM) algorithm as the potential classifiers for LULC mapping under different scenarios, and 2) to prepare a better LULC classification model for mountain terrain by using different indices with combination of spectral bands. Due to differences in topography, shadows, spectral confusion from overlapping spectral signatures of different land cover types, and a lack of access for ground verification, classification in mountainous terrain is difficult task compared to plain terrain classification. An enhanced LULC classification model has been designed using two popular machine learning (ML) classifier algorithms, SVM and RF, explicitly for mountainous terrains by taking into consideration of a study area of Gopeshwer town in the Chamoli district of Uttarakhand state, India. Online-based cloud platform Google Earth Engine (GEE) was used for overall processing. Four classification models were built using Sentinel 2B satellite imagery with 20m and 10m resolutions. Two of these models (Model 'i' based on RF algorithm and Model 'ii' based on SVM algorithm) were designed using spectral bands of visible and infrared wavelengths, and the other two (Model 'iii' based on RF algorithm and Model 'iv' based on SVM algorithm) with the addition of indices with spectral bands. The accuracy assessment was done using the confusion matrix based on the output results. Obtained result highlights that the overall accuracy for model 'i' and model 'ii' were 82% and 86% respectively, whereas these were 87.17% and 87.2% for model 'iii' and model 'iv' respectively. Finally, the study compared the performance of each model based on different accuracy metrics for better LULC mapping. It proposes an improved LULC classification model for mountainous terrains, which can contribute to better land management and planning in the study area.

Characterization of Foot-and-Mouth Disease Virus Serotype O-Specific Single Domain Antibody Expressed in the pET Expression System.

Foot and mouth disease (FMD) is an extremely contagious disease of cloven-hoofed domesticated and wild animals, resulting in significant economic losses in many parts of the world. FMD virus (FMDV) serotype O is responsible for approximately 70% of global outbreaks. For detection of FMDV antigen or antibody, ELISAs are used worldwide and have several limitations, such as batch-to-batch variation in generating immunobiologicals, high production cost and ethical concerns over animal sacrifice. The use of single domain antibody (sdAb) or variable N-terminal domain of the heavy chain of heavy chain antibody (VHH) found naturally in camels has proven their effectiveness in diagnostics and therapeutics. In the present study, the anti-FMDV serotype O-specific VHH-C1 gene sequence (Accession no. KJ751546) was retrieved from the NCBI database. The gene was synthesized commercially in the pBluescript KS+ cloning vector and expressed in E. coli BL21 (DE3) cells using the pET303/CT-His expression system with a C-terminal 6X-His tag. The expressed sdAb, verified by SDS‒PAGE and western blotting, was purified by Ni-chelate chromatography and used as a coating antibody in double antibody sandwich (DAS) ELISA for FMDV detection and typing. The sdAb exhibited a high binding affinity for FMDV serotype O, without any cross-reactivity toward serotypes A and Asia-1. It exhibited better thermostability up to 85 °C than conventional rabbit polyclonal anti-FMDV sera. The potential of sdAbs thus produced without sacrificing lab animals could be explored for replacing polyclonal sera in DAS-ELISA as well as for developing biosensors or lateral flow devices for FMDV type O detection.

Trypanosoma evansi RoTat 1.2 variant surface antigen mimotopes selected by panning of the random peptide phage-display library against monoclonal antibodies.

Mimotope peptides of native antigens are valuable for diverse applications such as diagnostics, therapeutics and modern vaccine design. Here, we report for the first time the selection and identification of peptide mimotopes of Trypanosoma evansi RoTat 1.2 variant surface glycoprotein (VSG) for their potential uses in surra diagnostics and multi-epitope vaccine research. First, we produced the mouse monoclonal antibodies (mAbs), designated as 2E11 (IgG1) and 1C2 (IgG1), against the antigens in T. evansi RoTat 1.2 lysates. We then used 2E11 mAb to immunoprecipitate the target antigen. The immunoprecipitated antigen was then identified to be the VSG by mass spectrometry. Both 2E11 and 1C2 mAbs reacted with the VSG in immunoblots. The surface plasmon resonance immunosensors developed with both the mAbs detected VSG in the parasite lysates as well as in the rodent sera. Further, the mAbs were biotinylated and used in three rounds of panning to select peptide mimotopes from the random peptide phage display library (PhD-12; New England Biolabs, USA). The phage clones selected against each mAb were amplified and tested by phage capture ELISA for specificity. The peptide coding regions of the selected phages were sequenced and the protein blast search of the deduced amino acid sequences was performed by accessing the non-redundant protein database at https://blast.ncbi.nlm.nih.gov/. The conformational B epitope prediction of the selected mimotope sequences was done by using 3D Pepitope algorithms accessed at: http://pepitope.tau.ac.il/. The potential applications of the selected mimotopes in surra diagnostics and research are being explored.

Novel hydrazone derivatives of N-amino-11-azaartemisinin with high order of antimalarial activity against multidrug-resistant Plasmodium yoelii nigeriensis in Swiss mice via intramuscular route.

Novel hydrazone derivatives 10a-m were prepared from N-Amino-11-azaartemisinin (9) and screened for their antimalarial activity by oral and intramuscular (i.m.) routes against multidrug-resistant Plasmodium yoelii in Swiss mice model. Several of the hydrazone derivatives showed higher order of antimalarial activity. Compounds 10b, 10g, 10m provided 100% protection to the infected mice at the dose of 24 mg/kg × 4 days via oral route. Fluorenone based hydrazone 10m the most active compound of the series, provided 100% protection at the dose of 6 mg/kg × 4 days via intramuscular route and also provided 100% protection at the dose of 12 mg/kg × 4 days via oral route. While artemisinin gave 100% protection at 48 mg/kg × 4 days and only 60% protection at 24 mg/kg × 4 days via intramuscular (i.m.) route. Compound 10m found to be four-fold more active than artemisinin via intramuscular route.