Development of a biophotonic fiber sensor using direct-taper and anti-taper techniques with seven-core and four-core fiber for the detection of doxorubicin in cancer treatment.

Doxorubicin (DOX) is an important drug for cancer treatment, but its clinical application is limited due to its toxicity and side effects. Therefore, detecting the concentration of DOX during treatment is crucial for enhancing efficacy and reducing side effects. In this study, the authors developed a biophotonic fiber sensor based on localized surface plasmon resonance (LSPR) with the multimode fiber (MMF)-four core fiber (FCF)-seven core fiber (SCF)-MMF-based direct-taper and anti-taper structures for the specific detection of DOX. Compared to other detection methods, it has the advantages of high sensitivity, low cost, and strong anti-interference ability. In this experiment, multi-walled carbon nanotubes (MWCNTs), cerium-oxide nanorods (CeO2-NRs), and gold nanoparticles (AuNPs) were immobilized on the probe surface to enhance the sensor's biocompatibility. MWCNTs and CeO2-NRs provided more binding sites for the fixation of AuNPs. By immobilizing AuNPs on the surface, the LSPR was stimulated by the evanescent field to detect DOX. The sensor surface was functionalized with DOX aptamers for specific detection, enhancing its specificity. The experiments demonstrated that within a linear detection range of 0-10 µM, the sensitivity of the sensor is 0.77 nm/µM, and the limit of detection (LoD) is 0.42 µM. Additionally, the probe's repeatability, reproducibility, stability, and selectivity were evaluated, indicating that the probe has high potential for detecting DOX during cancer treatment.

Plasmonic sensor based on offset-splicing and waist-expanded taper using multicore fiber for detection of Aflatoxins B1 in critical sectors.

In this work, authors have developed a portable, sensitive, and quick-response fiber optic sensor that is capable of detection of Aflatoxins B1 (AFB1) quantitatively and qualitatively. Using multi-mode fiber (MMF) and multi-core fiber (MCF), the MMF-MCF-MCF-MMF fiber structure based on symmetric transverse offset splicing and waist-expanded taper is fabricated. The evanescent waves are enhanced to form a strong evanescent field by etching the fiber surface with hydrofluoric acid. To successfully excite the localized surface plasmon resonance phenomenon, gold nanoparticles are deposited on the optical fiber probe's surface. Further, to modify the fiber optic probes, Niobium carbide (Nb2CTx) MXene and AFB1 antibodies are functionalized. Nb2CTx MXene is employed to strengthen the biocompatibility of the sensor and increase the specific surface area of the fiber probe, while AFB1 antibody is used to identify AFB1 micro-biomolecules in a specific manner. The reproducibility, reusability, stability, and selectivity of the proposed fiber probe are tested and validated using various concentration of AFB1 solutions. Finally, the linear range, sensitivity, and limit of detection of the sensing probe are determined as 0 - 1000 nM, 11.7 nm/µM, and 26.41 nM, respectively. The sensor offers an indispensable technique, low-cost solution and portability for AFB1-specific detection in agricultural products and their byproducts with its novel optical fiber structure and superior detecting capability. It is also useful for marine species like fish and consequently affecting health of human body.

Humanoid shaped optical fiber plasmon biosensor functionalized with graphene oxide/multi-walled carbon nanotubes for histamine detection.

Histamine is a biologically active molecule that serves as a reliable predictor of the quality of fish. In this work, authors have developed a novel humanoid-shaped tapered optical fiber (HTOF) biosensor based on the localized surface plasmon resonance (LSPR) phenomenon to detect varying histamine concentrations. In this experiment, a novel and distinctive tapering structure has been developed using a combiner manufacturing system and contemporary processing technologies. Graphene oxide (GO)/multi-walled carbon nanotubes (MWCNTs) are immobilized on the HTOF probe surface to increase the biocompatibility of biosensor. In this instance, GO/MWCNTs are deployed first, then gold nanoparticles (AuNPs). Consequently, the GO/MWCNTs help to give abundant space for the immobilization of nanoparticles (AuNPs in this case) as well as increase surface area for the attachment of biomolecules to the fiber surface. By immobilizing AuNPs on the surface of the probe, the evanescent field can stimulate the AuNPs and excite the LSPR phenomena for sensing the histamine. The surface of the sensing probe is functionalized with diamine oxidase enzyme in order to enhance the histamine sensor's particular selectivity. The proposed sensor is demonstrated experimentally to have a sensitivity of 5.5 nm/mM and a detection limit of 59.45 µM in the linear detection range of 0-1000 µM. In addition, the probe's reusability, reproducibility, stability, and selectivity are tested; the results of these indices show that the probe has a high application potential for detecting histamine levels in marine products.

Signal-enhanced multi-core fiber-based WaveFlex biosensor for ultra-sensitive xanthine detection.

In this work, we introduce a novel multimode fiber (MMF) - seven core fiber (SCF) - MMF (MCM) optical fiber biosensor, also known as the WaveFlex biosensor (plasma wave assisted fiber biosensor), based on localized surface plasmon resonance (LSPR) for qualitative detection of xanthine. Xanthine is a purine base widely distributed in human blood and tissues, and commonly used as an indicator for various disease detections. The MCM sensor incorporates a tapered optical fiber structure, fabricated using the combiner manufacturing system (CMS), and is designed with SCF and MMF. By effectively harnessing LSPR, the sensor boosts the attachment points of biomolecules on the probe surface through immobilized tungsten disulfide (WS2)-thin layers, gold nanoparticles (AuNPs), and carbon nitride quantum dots (C3N-QDs). The functionalization of xanthine oxidase (XO) on the sensing probe further enhances the sensor's specificity. The proposed WaveFlex biosensor exhibits a remarkable sensitivity of 3.2 nm/mM and a low detection limit of 96.75 µM within the linear detection range of 100 - 900 µM. Moreover, the sensor probe demonstrates excellent reusability, reproducibility, stability, and selectivity. With its sensitivity, biocompatibility, and immense potential for detecting human serum and fish products, this WaveFlex biosensor presents a promising platform for future applications.

Slide-type waveflex biosensor based on signal enhancement technology for alpha-fetoprotein detection.

The development of signal enhancement technology in optical fiber biosensors is beneficial for the accurate measurement of low-concentration samples. Here, a localized surface plasmon resonance (LSPR)-based fiber biosensor combining a slide-type fiber structure (thus named WaveFlex Biosensor) and low-dimensional materials is proposed for alpha-fetoprotein (AFP) detection. A symmetric transverse offset splicing technology was used to fabricate the multi-mode fiber (MMF-multi-core fiber (MCF)-MMF structure. Furthermore, the MMF on one side was prepared into an S-taper, forming a slide-type fiber structure to generate more energy leakage. The LSPR signal generated by gold nanoparticles (AuNPs) was enhanced by the CeO2 NPs and C3N quantum dots functionalized on the fiber probe. The excellent performance of NPs was conducive to improving the sensitivity of the WaveFlex biosensor and enabling the rapid detection of samples. An AFP antibody was used to identify AFP micro-biomolecules in a specific manner. Based on the combination of the above two methods, the developed fiber probe was applied to detect AFP, and the sensitivity and limit of detection were 32 pm/(ng/mL) and 6.65 ng/mL, respectively. The experimental results demonstrate that the signal-enhanced AFP WaveFlex biosensor has great potential for the rapid and accurate detection of AFP.

Homemade low-cost fabrication technique and stability analysis of a U-shaped fiber sensor structure.

In this work, the fabrication method of a U-shaped optical fiber (UOF) structure using single-mode fiber is proposed. Few UOF sensors have been developed to date, but the fabrication process has not been described in detail. Here, its subsequent homemade fabrication, optimization strategies, and analysis are thoroughly explored. Further, the influence of transmission on U-shaped diameter is explored. The transmitted intensity is mainly used to assess the strength of the evanescent field. For this purpose, three different diameters of 2 mm, 4 mm, and 6 mm UOFs are fabricated. The results show that the transmission of the U-shaped structure is dependent on the diameter of the UOF. Thereafter, different concentrations of glucose solutions are detected using the optimized stable UOF structure to showcase the sensing properties. Overall, this work is essential for beginners who want to conduct research on optical fiber sensors with a curved shape.

Development of a core-offset-based SMS fiber structure for detection of various biomolecules.

This paper discusses the details about the fabrication of single-mode fiber (SMF)- and multi-mode fiber (MMF)-based core-offset sensor structures for biomolecules detection. SMF-MMF-SMF (SMS) and SMF-core-offset MMF-SMF (SMS structure with core-offset) are proposed in this paper. In the conventional SMS structure the incident light is introduced from the SMF to the MMF and then passes through the MMF to the SMF. However, in the SMS-based core offset structure (COS) the incident light is introduced from the SMF to the core offset MMF and then passes through the MMF to the SMF, and more incident light leaks at the fusion point between the SMF and the MMF. This structure causes more incident light to leak out from the sensor probe, forming evanescent waves. By analyzing the transmitted intensity, the performance of COS can be improved. The results show that the structure of the core offset has great potential for the development of fiber-optic sensors.

Effective splicing technique of different cladding diameter-based optical fibers and performance evaluation.

In this work, the fabrication and sensing performance of fusion structures based on single-mode fiber (SMF) and multimode fiber (MMF) with different cladding diameters are discussed, and the effects of different lengths of MMF and fiber etching on sensing performance are analyzed. First, the transmitted intensity measurement experiment is performed, and the results indicate that the performance of the SMF-MMF-SMF(SMS)-based structure is better for sensing purposes. In addition, the results demonstrate that the performance of etched fiber is better than that of non-etched fiber. The etched fiber structure with lower fiber diameters produces more evanescent waves and is better for sensing purposes. Therefore, the proposed structure has certain development potential as an application of future optical fiber sensors.

Development and stability analysis of an S-tapered optical fiber-based sensor structure.

In this paper, three S-tapered fiber (STF) structures with different diameters (40, 60, and 80 µm) are fabricated using conventional single-mode fiber. First, the reproducibility of the proposed S-tapered structure is confirmed through an analysis of the diameter distribution. Considering the transmitted intensities of the three various diameter, S-tapered structures reveal that the STF with a 40 µm diameter produces more evanescent waves and is more sensitive to external refractive index variations. Therefore, the STF structure with a 40 µm diameter was evaluated for the detection of different concentration of glucose solutions, demonstrating that the structure has the potential to be utilized to develop a highly sensitive fiber sensor.

Association of the Human Leptin Receptor Gene (rs1137101; Gln223Arg) Polymorphism and Circulating Leptin in Patients with Metabolic Syndrome in the Indian Population.

Phenotypic expression of metabolic syndrome is precipitated by environmental variables along with the individual genetic susceptibility to the obesogenic environment and growing body of evidence suggest a paramount role of adipocytokines. Therefore, identifying the genetic influence on circulation leptin levels and clarifying genotype-phenotype correlation of rs1137101 {Leptin receptor gene (LEPR) Gln223Arg (Q223R; A668G)} in metabolic syndrome were the primary objective of this study. A total of 447 adult participants, including 214 metabolic syndrome patients and 233 healthy controls, were genotyped using polymerase chain reaction-restriction fragment length polymorphism method to unravel the effects of genetic risk loci {Leptin receptor gene; Gln223Arg (Q223R; A668G); rs1137101} on the occurrence of metabolic syndrome in consort with circulation leptin levels. Suitable descriptive statistics was used for different variables. The genotype frequencies were found to be in Hardy-Weinberg equilibrium for both cases (p > 0.2722) as well as in controls (p > 0.2331). However, genotype (x2: 11.26, 2 d.f. p = 0.0036) and allele distribution (x2: 10.51, 2 d.f. p: 0.0012) of the LEPR Gln223Arg (Q223R; A668G) differed significantly between cases and controls. Gln/Arg genotype (OR = 1.6099; 95% CI = 1.0847-2.3893; p value = 0.0181), Arg/Arg genotype (OR = 2.8121; 95% CI = 1.4103-5.6074; p value = 0.0033) and R allele (OR = 1.5875; 95% CI = 1.1996-2.1008; p value = 0.0012) were significantly associated with increased risk of metabolic syndrome in univariate analysis. Further a multivariate logistic regression adjusted for potential confounders showed that Arg/Arg genotype (OR = 1.9; 95% CI = 1.271-2.639; p-value < 0.05) and Gln/Arg (OR: 1.3; 95% CI = 0.873-2.034; p value < 0.05) have a significant risk for the occurrence of the metabolic syndrome. A progressive increase in the serum leptin levels from major homozygous alleles to minor homozygous alleles were observed indicating that rs1137101 modify the serum leptin concentrations in patients with metabolic syndrome. These findings provide enough evidence of a significant association of LEPR Gln223Arg (Q223R; A668G) polymorphism in the LepR gene in Indian patients with increased risk of metabolic syndrome for R allele and Arg/Arg homozygote. Thus, rs1137101 might be a pleiotropic locus for metabolic syndrome and its components in studied population.

Convex fiber-tapered seven core fiber-convex fiber (CTC) structure-based biosensor for creatinine detection in aquaculture.

The purpose of this article is to propose an optical fiber sensor probe based on the localized surface plasma resonance (LSPR) technique for the detection of creatinine in aquaculture. The sensing probe is functionalized through the use of gold nanoparticles (AuNPs), niobium carbide (Nb2CTx) MXene, and creatinase (CA) enzyme. The intrinsic total internal reflection (TIR) mechanism is modified to increase the evanescent field intensity using a heterogeneous core mismatch and tapering probe structure (i.e., convex fiber-tapered seven core fiber-convex fiber (CTC) structure). Strong evanescent fields can stimulate AuNPs and induce the LSPR effect, thereby increasing probe sensitivity. The specific recognition is enhanced by Nb2CTx MXene adsorbing more active CA enzymes. The developed sensor probe has a sensitivity and limit of detection of 3.1 pm/µM and 86.12 µM, respectively, in the linear range of 0-2000 µM. Additionally, the sensor probe's reusability, reproducibility, stability, and selectivity were evaluated, with satisfactory results obtained with impact for areas like food protein, marine life and healthcare.

Calvatia Lilacina Extracts Exert Anti-Breast-Cancer Bioactivity through the Apoptosis Induction Dependent on Mitochondrial Reactive Oxygen Species and Caspase Activation.

Puffballs are a class of fungi widely distributed worldwide and associated with various bioactivities. This research mainly showed the antitumor bioactivity of extracts from Calvatia lilacina (CL), which is a common variety of puffballs. NMR and high-performance liquid chromatography methods are used to characterize the extracts. Results showed that CL extracts obtained with petroleum ether, ethyl acetate, ethanol, and water elicited obvious inhibitory effects on the proliferation of A549, Caco-2, and MDA-MB-231. Among these extracts, petroleum ether extract demonstrated the highest performance. This extract was then separated into seven sub-fractions (SFs). Three of these SFs (3#, 6#, and 7#) induces a decrease in the viability of MDA-MB-231 cells in which 7# SF exhibited the highest cytotoxicity, where the major component was found to be ergosta-7,22-dien-3-one. Further tests revealed that 7# SF from petroleum ether extract could trigger severe cell death in human breast cancer cells (MDA-MB-231) by activating the apoptotic pathway dependent on mitochondrial reactive oxygen species and caspase activation. All these results in combination indicate that the mechanism of extract-potentiated apoptosis associates closely with ROS-dependent mitochondrial dysfunction events which further induces mitochondria-mediated intrinsic cytochrome C-caspase-related pathway of apoptosis.Supplemental data for this article is available online at https://doi.org/10.1080/01635581.2021.1936576.

Feasibility analysis of an SMS-/MSM-/SMSMS-based optical fiber sensor structure.

The paper discusses the application of single-mode fiber (SMF) and multimode fiber (MMF) to the fabrication of a sensor structure based on the hetero-core optical fiber structure. The proposed structures are SMF-MMF-SMF (SMS), MMF-SMF-MMF (MSM), and SMF-MMF-SMF-MMF-SMF (SMSMS). The transmitted intensity of the probe is used to estimate the strength of the evanescent field. The results indicate that the SMSMS structure generates more evanescent waves that penetrate deeper into the sensing probe, increasing its sensitivity. As a result, the SMSMS structure has enormous development potential in the field of sensing.

Performance analysis of an SMF-/MMF-based single/double/quadruple tapered optical fiber structure.

This paper primarily discusses the structural performance analysis of a single/double/quadruple tapered optical fiber (TOF) structure based on single-mode fiber (SMF) and multi-mode fiber (MMF). Furthermore, the TOF's performance, including its diameter distribution, transmitted intensity, and reproducibility, is also evaluated. According to the experimental results, it can be concluded that the quadruple TOF structure based on SMF has a higher density of evanescent waves (EWs) on the surface of the tapered area, which is essential for the fabrication of high-sensitivity optical fiber sensors. The structure proposed in this article is feasible, and it can be used for optical fiber sensing while offering significant practical and promising applications as well.

Comparative evaluation of host immune response and cytokine signature pertaining to Th1 and Th2 immune arms in serum and tissue among patients of acute localised vs. chronic disseminated dermatophytosis.

BACKGROUND: India is witnessing an epidemic of dermatophytosis. The role of host immune response against fungi in chronicity and dissemination is topic of ongoing research. We conducted cross-sectional comparative study to determine the difference in Th1 (IFN-γ) and Th2 (IL4) response in serum and tissue between acute and localised vs. chronic and disseminated cases. METHODS: Patients (18-60 years) were divided in two groups-group A (n = 114, BSA <5%, single anatomic site, duration <6 months, n = 118) and group B (n = 107 BSA >10%, > one anatomic site, duration >12 months, n = 118). Clinical parameters along with serum levels of IgE, IL-4 and IFN-γ and expression of IL4 and IFN-γ in dermal infiltrate were compared between group. RESULTS: Trichophyton mentagrophytes complex was commonest causative fungi. Serum levels of IgE were significantly higher (median A-539.2, B-2901.0, p < .001) whereas levels IL-4(median A-21.3, B-20.4, p < .001) and IFN-γ(median A-9.6, B-5.1, p < .001) were significantly lower in chronic cases. Expression of IL-4 was observed in most biopsy specimens in both groups without any difference in intensity of staining. Expression of IFN-γ was not detected in all but one specimen across both the groups. Severe itching (OR:0.050, CI:0.018, 0.139, p < .001), sign of topical steroid abuse (OR:0.203,CI:0.077, 0.537; p = .001), ↓IFN-γ (OR:4.683, CI:1.634, 13.418; p = .004) correlated significantly and independently with chronic dermatophytosis. CONCLUSION: Our study shows chronic and disseminated cases of dermatophytosis differ immunologically in terms of higher IgE, and lower IL4 and IFN-γ. Expression of IL4 is present in tissue of both acute, localised and chronic disseminated cases. Expression of IFN-γ cannot be established in our study.

Utility of P-SEP, sTREM-1 and suPAR as Novel Sepsis Biomarkers in SARS-CoV-2 Infection.

The coronavirus disease 2019 is a highly contagious viral infection caused by SARS-CoV-2 virus, member of coronaviridae family. It causes life threatening complications due to complexity and rapid onset course of the disease. Early identification of high-risk patients who require close monitoring and aggressive treatment remains challengeable till date. Novel biomarkers which help to identify high risk patients at the early stage is high priority. Objective of this review to find utility of P-SEP, sTREM-1 and suPAR for diagnosis, risk stratification and prognosis of SARS-CoV-2 infected cases. Soluble receptors like, P-SEP, sTREM-1 and suPAR have been involved in immune regulation in SARS-CoV-2 infection and elevate more in severe cases. A comprehensive research of databases like PubMed, EMBASE, CNKI and Web of Science was performed for relevant studies. A total of nine out of fifteen research literature in initial screening were included for this review. Interestingly all studies have reported high levels of P-SEP, sTREM-1 and suPAR in SARS-CoV-2 infected cases and the biomarkers positively correlated with severity of infection. This implies that P-SEP, sTREM-1 and suPAR can be implemented as surrogate marker in blood profile for early diagnosis, risk stratification and prognosis in SARS-CoV-2 for better management in Indian population at the current situation.

A Molecular Insight of the Role of PIN-1 Promoter Polymorphism (- 667C > T; rs2233679) in Chronic Kidney Disease Patients with Secondary Hyperparathyroidism.

Murine studies stipulate Peptidyl-prolyl cis-trans isomerase NIMA-interacting 1 (PIN-1) as a key mediator of PTH mRNA stability and is acknowledged by genome-wide-association-studies as secondary hyperparathyroidism defining trait in chronic kidney disease. Therefore, we hypothesize that molecular variants of the PIN-1 gene might affect the incidence and predisposition to secondary hyperparathyroidism in chronic renal insufficiency. A total of 281 adult participants, including 124 chronic kidney disease patients with secondary hyperparathyroidism and 157 healthy controls, were genotyped using polymerase chain reaction-restriction fragment length polymorphism method to unravel the effects of genetic risk loci (PIN-1 gene; - 667C > T; rs2233679) on the susceptibility to secondary hyperparathyroidism in chronic kidney disease. Suitable descriptive statistics was used for different variables. The genotype (x2: 8.03, 2 d. f. p = 0.0181) and allele distribution (x2: 7.27, 2 d. f. p: 0.007) of the - 667C > T variant differed significantly in cases and controls, with no deviation from Hardy-Weinberg equilibrium in either affected or control group. The observed frequencies of T allele of PIN-1 - 667 C > T SNP was significantly high in CKD-SHPT group compared to control group (52.41% vs. 41.71%; p: 0.0118). TT variant of PIN-1 - 667C > T SNP was associated with increased risk for occurrence of CKD-SHPT in univariate analysis (OR: 4.6, p: 0.0032, 95% CI: 1.66-12.76). Further in multivariate analysis, both TT (OR: 3.84, p: 0.002, 95% CI: 0.79-9.26) and CT + TT (OR: 2.51, p: 0.031, 95% CI: 0.64-8.68) variants were independently associated with increased risk for CKD-SHPT, emphasizing the deleterious effect of minor T allele. Serum PTH, phosphorus levels were significantly high in CT and TT genotypes compared to CC genotype of PIN-1 - 667C > T SNP (p = 0.001). PIN-1 promoter functional SNP (- 667C > T; rs2233679) appeared to be an important genetic determinant in etiopathogenesis of CKD-SHPT and genetic variants of this SNP influences the risk stratification and might serve as a predictive marker. Thus, rs2233679 can be useful for outcome predictions during diagnostic processes.

Dynamics of Zea mays transcriptome in response to a polyphagous herbivore, Spodoptera litura.

Zea mays defense response is well-crafted according to the physical and chemical weapons utilized by their invaders during the coevolutionary period. Maize plants employ diversified defense strategies and alter the spatiotemporal distribution of several classes of defensive compounds to affect insect herbivore performance. However, only little knowledge is available about the defense orchestration of maize in response to Spodoptera litura, a voracious Noctuidae pest. In order to decipher the defense status of Zea mays (African tall variety) against S. litura, a comparative feeding bioassay was executed, which revealed reduced performance of the herbivore on maize. In order to understand the molecular mechanism behind maize tolerance against S. litura, a microarray-based genome-wide expression analysis was performed. The comparative analysis displayed 792 differentially expressed genes (DEGs), wherein 357 genes were upregulated and 435 genes were downregulated at fold change ≥ 2 and p value ≤ 0.05. The upregulated genes were identified and categorized as defense-related, oxidative stress-related, transcription regulatory genes, protein synthesis genes, phytohormone-related, and primary and secondary metabolism-related. In contrast, downregulated genes were mainly associated with plant growth and development, indicating a balance of growth and defense response and utilization of a highly evolved C-diversion response were noticed. Maize plants showed better tolerance against herbivory and maintained its fitness using a combinatorial strategy. This peculiar response of Zea mays against S. litura offers an excellent possibility of managing polyphagous pests by spicing up the plant's defensive response with tolerance mechanism.

2D material assisted SMF-MCF-MMF-SMF based LSPR sensor for creatinine detection.

The purpose of this work is to propose a simple, portable, and sensitive biosensor structure based on singlemode fiber-multicore fiber-multimode fiber-singlemode fiber (SMF-MCF-MMF-SMF) for the detection of creatinine in the human body. Chemical etching has been used to modify the diameter of the sensing probe to approximately 90 µm in order to generate strong evanescent waves (EWs). The sensor probe is functionalized with graphene oxide (GO), gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS2-NPs), and creatininase (CA) enzyme. The concentration of creatinine is determined using fiber optic localized surface plasmon resonance (LSPR). While EWs are used to enhance the LSPR effect of AuNPs, two-dimensional (2D) materials (GO and MoS2-NPs) are used to increase biocompatibility, and CA is used to increase probe specificity. Additionally, HR-TEM and UV-visible spectroscopy are used to characterize and measure the nanoparticle (NP) morphology and absorption spectrum, respectively. SEM is used to characterize the NPs immobilized on the surface of the fiber probe. The sensor probe's reusability, reproducibility, stability, selectivity, and pH test results are also tested to verify the sensor performance. The sensitivity of proposed sensor is 0.0025 nm/µM, has a standard deviation of 0.107, and has a limit of detection of 128.4 µM over a linear detection range of 0 - 2000 µM.

Fabrication techniques and stability analysis of SMF-/MMF-based differently tapered optical fiber structures.

In this work, fabrication techniques and optimization of single-mode fiber (SMF)- and multi-mode fiber (MMF)-based differently tapered optical fiber (TOF) structures are discussed. Further, taper characteristics such as diameter, transmitted intensity, and repeatability are analyzed. The results show that 25 µm TOF consists of lower transmitted intensity, meaning higher evanescent waves materialize at the tapered surface, which helps in suitable potential application of TOF as an optical fiber sensor.