Multi-dimensional in vitro bioactivity profiling for grouping of glycol ethers.

High-content screening data derived from physiologically-relevant in vitro models promise to improve confidence in data-integrative groupings for read-across in human health safety assessments. The biological data-based read-across concept is especially applicable to bioactive chemicals with defined mechanisms of toxicity; however, the challenge of data-derived groupings for chemicals that are associated with little or no bioactivity has not been explored. In this study, we apply a suite of organotypic and population-based in vitro models for comprehensive bioactivity profiling of twenty E-Series and P-Series glycol ethers, solvents with a broad variation in toxicity ranging from relatively non-toxic to reproductive and hematopoetic system toxicants. Both E-Series and P-Series glycol ethers elicited cytotoxicity only at high concentrations (mM range) in induced pluripotent stem cell-derived hepatocytes and cardiomyocytes. Population-variability assessment comprised a study of cytotoxicity in 94 human lymphoblast cell lines from 9 populations and revealed differences in inter-individual variability across glycol ethers, but did not indicate population-specific effects. Data derived from various phenotypic and transcriptomic assays revealed consistent bioactivity trends between both cardiomyocytes and hepatocytes, indicating a more universal, rather than cell-type specific mode-of-action for the tested glycol ethers in vitro. In vitro bioactivity-based similarity assessment using Toxicological Priority Index (ToxPi) showed that glycol ethers group according to their alcohol chain length, longer chains were associated with increased bioactivity. While overall in vitro bioactivity profiles did not correlate with in vivo toxicity data on glycol ethers, in vitro bioactivity of E-series glycol ethers were indicative of and correlated with in vivo irritation scores.

Current legal issues of conducting a forensic medical examination of newborns' corpses.

OBJECTIVE: Introduction: Forensic medical examination is a mandatory investigative action in determining the causes of death of newborns. It is especially significant and occupies a key place in proving the corpus deliciti. The aim is to study the current legal issues of a forensic medical examination of newborns' corpses. PATIENTS AND METHODS: Materials and methods: The study of legal and literary sources was carried out. The library-semantic and the content analysis methods were applied. CONCLUSION: Conclusions: Forensic medical examination should also include questions regarding the mother of the newborn: whether she was healthy at the time of delivery; if the medical staff caused any harm to her or her child; if she had the necessary help before and during the childbirth, etc. Examination should be appointed if one of the parents has the desire, which must be expressed in writing in the form of a motion.

In vitro cardiotoxicity assessment of environmental chemicals using an organotypic human induced pluripotent stem cell-derived model.

An important target area for addressing data gaps through in vitro screening is the detection of potential cardiotoxicants. Despite the fact that current conservative estimates relate at least 23% of all cardiovascular disease cases to environmental exposures, the identities of the causative agents remain largely uncharacterized. Here, we evaluate the feasibility of a combinatorial in vitro/in silico screening approach for functional and mechanistic cardiotoxicity profiling of environmental hazards using a library of 69 representative environmental chemicals and drugs. Human induced pluripotent stem cell-derived cardiomyocytes were exposed in concentration-response for 30min or 24h and effects on cardiomyocyte beating and cellular and mitochondrial toxicity were assessed by kinetic measurements of intracellular Ca2+ flux and high-content imaging using the nuclear dye Hoechst 33342, the cell viability marker Calcein AM, and the mitochondrial depolarization probe JC-10. More than half of the tested chemicals exhibited effects on cardiomyocyte beating after 30min of exposure. In contrast, after 24h, effects on cell beating without concomitant cytotoxicity were observed in about one third of the compounds. Concentration-response data for in vitro bioactivity phenotypes visualized using the Toxicological Prioritization Index (ToxPi) showed chemical class-specific clustering of environmental chemicals, including pesticides, flame retardants, and polycyclic aromatic hydrocarbons. For environmental chemicals with human exposure predictions, the activity-to-exposure ratios between modeled blood concentrations and in vitro bioactivity were between one and five orders of magnitude. These findings not only demonstrate that some ubiquitous environmental pollutants might have the potential at high exposure levels to alter cardiomyocyte function, but also indicate similarities in the mechanism of these effects both within and among chemicals and classes.

Assessment of beating parameters in human induced pluripotent stem cells enables quantitative in vitro screening for cardiotoxicity.

Human induced pluripotent stem cell (iPSC)-derived cardiomyocytes show promise for screening during early drug development. Here, we tested a hypothesis that in vitro assessment of multiple cardiomyocyte physiological parameters enables predictive and mechanistically-interpretable evaluation of cardiotoxicity in a high-throughput format. Human iPSC-derived cardiomyocytes were exposed for 30 min or 24 h to 131 drugs, positive (107) and negative (24) for in vivo cardiotoxicity, in up to 6 concentrations (3 nM to 30 uM) in 384-well plates. Fast kinetic imaging was used to monitor changes in cardiomyocyte function using intracellular Ca(2+) flux readouts synchronous with beating, and cell viability. A number of physiological parameters of cardiomyocyte beating, such as beat rate, peak shape (amplitude, width, raise, decay, etc.) and regularity were collected using automated data analysis. Concentration-response profiles were evaluated using logistic modeling to derive a benchmark concentration (BMC) point-of-departure value, based on one standard deviation departure from the estimated baseline in vehicle (0.3% dimethyl sulfoxide)-treated cells. BMC values were used for cardiotoxicity classification and ranking of compounds. Beat rate and several peak shape parameters were found to be good predictors, while cell viability had poor classification accuracy. In addition, we applied the Toxicological Prioritization Index (ToxPi) approach to integrate and display data across many collected parameters, to derive "cardiosafety" ranking of tested compounds. Multi-parameter screening of beating profiles allows for cardiotoxicity risk assessment and identification of specific patterns defining mechanism-specific effects. These data and analysis methods may be used widely for compound screening and early safety evaluation in drug development.

Multifunctional profiling of triple-negative breast cancer patient-derived tumoroids for disease modeling.

3D cell models derived from patient tumors are highly translational tools that can recapitulate the complex genetic and molecular compositions of solid cancers and accelerate identification of drug targets and drug testing. However, the complexity of performing assays with such models remains a hurdle for their wider adoption. In the present study, we describe methods for processing and multi-functional profiling of tumoroid samples to test compound effects using a novel flowchip system in combination with high content imaging and metabolite analysis. Tumoroids were formed from primary cells isolated from a patient-derived tumor explant, TU-BcX-4IC, that represents metaplastic breast cancer with a triple-negative breast cancer subtype. Assays were performed in a microfluidics-based device (Pu⋅MA System) that allows automated exchange of media and treatments of tumoroids in a tissue culture incubator environment. Multi-functional assay profiling was performed on tumoroids treated with anti-cancer drugs. High-content imaging was used to evaluate drug effects on cell viability and expression of E-cadherin and CD44. Lactate secretion was used to measure tumoroid metabolism as a function of time and drug concentration. Observed responses included loss of cell viability, decrease in E-cadherin expression, and increase of lactate production. Importantly, the tumoroids were sensitive to romidepsin and trametinib, while showed significantly reduced sensitivity to paclitaxel and cytarabine, consistent with the primary tumor response. These methods for multi-parametric profiling of drug effects in patient-derived tumoroids provide an in depth understanding of drug sensitivity of individual tumor types, with important implications for the future development of personalized medicine.

Disease Modeling with 3D Cell-Based Assays Using a Novel Flowchip System and High-Content Imaging.

There is an increasing interest in using three-dimensional (3D) cell structures for modeling tumors, organs, and tissue to accelerate translational research. We describe here a novel automated organoid assay system (the Pu·MA System) combined with microfluidic-based flowchips that can facilitate 3D cell-based assays. The flowchip is composed of sample wells, which contain organoids, connected to additional multiple wells that can hold various assay reagents. Organoids are positioned in a protected chamber in sample wells, and fluids are exchanged from side reservoirs using pressure-driven flow. Media exchange, sample staining, wash steps, and other processes can be performed without disruption to or loss of 3D sample. The bottom of the sample chamber is thin, optically clear plastic compatible with high-content imaging (HCI). The whole system can be kept in an incubator, allowing long-term cellular assays to be performed. We present two examples of use of the system for biological research. In the first example, cytotoxicity effects of anticancer drugs were evaluated on HeLa and HepG2 spheroids using HCI and vascular endothelial growth factor expression. In the second application, the flowchip system was used for the functional evaluation of Ca2+ oscillations in neurospheroids. Neurospheres were incubated with neuroactive compounds, and neuronal activity was assessed using Ca2+-sensitive dyes and fast kinetic fluorescence imaging. This novel assay system using microfluidics enables automation of 3D cell-based cultures that mimic in vivo conditions, performs multidosing protocols and multiple media exchanges, provides gentle handling of spheroids and organoids, and allows a wide range of assay detection modalities.

Functional and Mechanistic Neurotoxicity Profiling Using Human iPSC-Derived Neural 3D Cultures.

Neurological disorders affect millions of people worldwide and appear to be on the rise. Whereas the reason for this increase remains unknown, environmental factors are a suspected contributor. Hence, there is an urgent need to develop more complex, biologically relevant, and predictive in vitro assays to screen larger sets of compounds with the potential for neurotoxicity. Here, we employed a human induced pluripotent stem cell (iPSC)-based 3D neural platform composed of mature cortical neurons and astrocytes as a model for this purpose. The iPSC-derived human 3D cortical neuron/astrocyte co-cultures (3D neural cultures) present spontaneous synchronized, readily detectable calcium oscillations. This advanced neural platform was optimized for high-throughput screening in 384-well plates and displays highly consistent, functional performance across different wells and plates. Characterization of oscillation profiles in 3D neural cultures was performed through multi-parametric analysis that included the calcium oscillation rate and peak width, amplitude, and waveform irregularities. Cellular and mitochondrial toxicity were assessed by high-content imaging. For assay characterization, we used a set of neuromodulators with known mechanisms of action. We then explored the neurotoxic profile of a library of 87 compounds that included pharmaceutical drugs, pesticides, flame retardants, and other chemicals. Our results demonstrated that 57% of the tested compounds exhibited effects in the assay. The compounds were then ranked according to their effective concentrations based on in vitro activity. Our results show that a human iPSC-derived 3D neural culture assay platform is a promising biologically relevant tool to assess the neurotoxic potential of drugs and environmental toxicants.

Determination of Hepatotoxicity in iPSC-Derived Hepatocytes by Multiplexed High Content Assays.

We present here methods for assessing hepatotoxicity by high content imaging and image analysis. The assays focus on the characterization of toxic effects using a variety of phenotypic endpoint readouts. Multi-parametric automated image analysis is used in the protocols to increase assay sensitivity and provide important information about possible in vitro toxicity mechanisms. iPSC-derived hepatocytes were used as a model for the hepatotoxicity assays, but the methods would also be suitable for other liver toxicity cell models. The methods contain detailed step-by-step descriptions of the cell treatment, staining, image acquisition, and image analysis.

Phenotypic Assays for Characterizing Compound Effects on Induced Pluripotent Stem Cell-Derived Cardiac Spheroids.

Development of more complex, biologically relevant, and predictive cell-based assays for compound screening is a major challenge in drug discovery. The focus of this study was to establish high-throughput compatible three-dimensional (3D) cardiotoxicity assays using human induced pluripotent stem cell-derived cardiomyocytes. Using both high-content imaging and fast kinetic fluorescence imaging, the impact of various compounds on the beating rates and patterns of cardiac spheroids was monitored by changes in intracellular Ca2+ levels with calcium-sensitive dyes. Advanced image analysis methods were implemented to provide multiparametric characterization of the Ca2+ oscillation patterns. In addition, we used confocal imaging and 3D analysis methods to characterize compound effects on the morphology of 3D spheroids. This phenotypic assay allows for the characterization of parameters such as beating frequency, amplitude, peak width, rise and decay times, as well as cell viability and morphological characteristics. A set of 22 compounds, including a number of known cardioactive and cardiotoxic drugs, was assayed at different time points, and the calculated EC50 values for compound effects were compared between 3D and two-dimensional (2D) model systems. A significant concordance in the phenotypes was observed for compound effects between the two models, but essential differences in the concentration responses and time dependencies of the compound-induced effects were observed. Together, these results indicate that 3D cardiac spheroids constitute a functionally distinct biological model system from traditional flat 2D cultures. In conclusion, we have demonstrated that phenotypic assays using 3D model systems are enabled for screening and suitable for cardiotoxicity assessment in vitro.

Phenotypic Characterization of Toxic Compound Effects on Liver Spheroids Derived from iPSC Using Confocal Imaging and Three-Dimensional Image Analysis.

Cell models are becoming more complex to better mimic the in vivo environment and provide greater predictivity for compound efficacy and toxicity. There is an increasing interest in exploring the use of three-dimensional (3D) spheroids for modeling developmental and tissue biology with the goal of accelerating translational research in these areas. Accordingly, the development of high-throughput quantitative assays using 3D cultures is an active area of investigation. In this study, we have developed and optimized methods for the formation of 3D liver spheroids derived from human iPS cells and used those for toxicity assessment. We used confocal imaging and 3D image analysis to characterize cellular information from a 3D matrix to enable a multi-parametric comparison of different spheroid phenotypes. The assay enables characterization of compound toxicities by spheroid size (volume) and shape, cell number and spatial distribution, nuclear characterization, number and distribution of cells expressing viability, apoptosis, mitochondrial potential, and viability marker intensities. In addition, changes in the content of live, dead, and apoptotic cells as a consequence of compound exposure were characterized. We tested 48 compounds and compared induced pluripotent stem cell (iPSC)-derived hepatocytes and HepG2 cells in both two-dimensional (2D) and 3D cultures. We observed significant differences in the pharmacological effects of compounds across the two cell types and between the different culture conditions. Our results indicate that a phenotypic assay using 3D model systems formed with human iPSC-derived hepatocytes is suitable for high-throughput screening and can be used for hepatotoxicity assessment in vitro.

Neurite outgrowth in human induced pluripotent stem cell-derived neurons as a high-throughput screen for developmental neurotoxicity or neurotoxicity.

Due to the increasing prevalence of neurological disorders and the large number of untested compounds in the environment, there is a need to develop reliable and efficient screening tools to identify environmental chemicals that could potentially affect neurological development. Herein, we report on a library of 80 compounds screened for their ability to inhibit neurite outgrowth, a process by which compounds may elicit developmental neurotoxicity, in a high-throughput, high-content assay using human neurons derived from induced pluripotent stem cells (iPSC). The library contains a diverse set of compounds including those that have been known to be associated with developmental neurotoxicity (DNT) and/or neurotoxicity (NT), environmental compounds with unknown neurotoxic potential (e.g., polycyclic aromatic hydrocarbons (PAHs) and flame retardants (FRs)), as well as compounds with no documented neurotoxic potential. Neurons were treated for 72h across a 6-point concentration range (∼0.3-100µM) in 384-well plates. Effects on neurite outgrowth were assessed by quantifying total outgrowth, branches, and processes. We also assessed the number ofviable cells per well. Concentration-response profiles were evaluated using a Hill model to derive benchmark concentration (BMC) values. Assay performance was evaluated using positive and negative controls and test replicates. Compounds were ranked by activity and selectivity (i.e., specific effects on neurite outgrowth in the absence of concomitant cytotoxicity) and repeat studies were conducted to confirm selectivity. Among the 80 compounds tested, 38 compounds were active, of which 16 selectively inhibited neurite outgrowth. Of these 16 compounds, 12 were known to cause DNT/NT and the remaining 4 compounds included 3 PAHs and 1 FR. In independent repeat studies, 14/16 selective compounds were reproducibly active in the assay, of which only 6 were selective for inhibition of neurite outgrowth. These 6 compounds were previously shown in the literature to be neurotoxic. These studies shed light on the current status of human iPSCs in DNT/NT screening and their utility in identifying, ranking, and prioritizing compounds with DNT/NT potential for further in vivo testing.

A chemical-biological similarity-based grouping of complex substances as a prototype approach for evaluating chemical alternatives.

Comparative assessment of potential human health impacts is a critical step in evaluating both chemical alternatives and existing products on the market. Most alternatives assessments are conducted on a chemical-by-chemical basis and it is seldom acknowledged that humans are exposed to complex products, not individual substances. Indeed, substances of Unknown or Variable composition, Complex reaction products, and Biological materials (UVCBs) are ubiquitous in commerce yet they present a major challenge for registration and health assessments. Here, we present a comprehensive experimental and computational approach to categorize UVCBs according to global similarities in their bioactivity using a suite of in vitro models. We used petroleum substances, an important group of UVCBs which are grouped for regulatory approval and read-across primarily on physico-chemical properties and the manufacturing process, and only partially based on toxicity data, as a case study. We exposed induced pluripotent stem cell-derived cardiomyocytes and hepatocytes to DMSO-soluble extracts of 21 petroleum substances from five product groups. Concentration-response data from high-content imaging in cardiomyocytes and hepatocytes, as well as targeted high-throughput transcriptomic analysis of the hepatocytes, revealed distinct groups of petroleum substances. Data integration showed that bioactivity profiling affords clustering of petroleum substances in a manner similar to the manufacturing process-based categories. Moreover, we observed a high degree of correlation between bioactivity profiles and physico-chemical properties, as well as improved groupings when chemical and biological data were combined. Altogether, we demonstrate how novel in vitro screening approaches can be effectively utilized in combination with physico-chemical characteristics to group complex substances and enable read-across. This approach allows for rapid and scientifically-informed evaluation of health impacts of both existing substances and their chemical alternatives.

Cell membrane array fabrication and assay technology.

BACKGROUND: Microarray technology has been used extensively over the past 10 years for assessing gene expression, and has facilitated precise genetic profiling of everything from tumors to small molecule drugs. By contrast, arraying cell membranes in a manner which preserves their ability to mediate biochemical processes has been considerably more difficult. RESULTS: In this article, we describe a novel technology for generating cell membrane microarrays for performing high throughput biology. Our robotically-arrayed supported membranes are physiologically fluid, a critical property which differentiates this technology from other previous membrane systems and makes it useful for studying cellular processes on an industrialized scale. Membrane array elements consist of a solid substrate, above which resides a fluid supported lipid bilayer containing biologically-active molecules of interest. Incorporation of transmembrane proteins into the arrayed membranes enables the study of ligand/receptor binding, as well as interactions with live intact cells. The fluidity of these molecules in the planar lipid bilayer facilitates dimerization and other higher order interactions necessary for biological signaling events. In order to demonstrate the utility of our fluid membrane array technology to ligand/receptor studies, we investigated the multivalent binding of the cholera toxin B-subunit (CTB) to the membrane ganglioside GM1. We have also displayed a number of bona fide drug targets, including bacterial endotoxin (also referred to as lipopolysaccharide (LPS)) and membrane proteins important in T cell activation. CONCLUSION: We have demonstrated the applicability of our fluid cell membrane array technology to both academic research applications and industrial drug discovery. Our technology facilitates the study of ligand/receptor interactions and cell-cell signaling, providing rich qualitative and quantitative information.

High-Content Assay Multiplexing for Toxicity Screening in Induced Pluripotent Stem Cell-Derived Cardiomyocytes and Hepatocytes.

Cell-based high-content screening (HCS) assays have become an increasingly attractive alternative to traditional in vitro and in vivo testing in pharmaceutical drug development and toxicological safety assessment. The time- and cost-effectiveness of HCS assays, combined with the organotypic nature of human induced pluripotent stem cell (iPSC)-derived cells, open new opportunities to employ physiologically relevant in vitro model systems to improve screening for potential chemical hazards. In this study, we used two human iPSC types, cardiomyocytes and hepatocytes, to test various high-content and molecular assay combinations for their applicability in a multiparametric screening format. Effects on cardiomyocyte beat frequency were characterized by calcium flux measurements for up to 90 min. Subsequent correlation with intracellular cAMP levels was used to determine if the effects on cardiac physiology were G-protein-coupled receptor dependent. In addition, we utilized high-content cell imaging to simultaneously determine cell viability, mitochondrial integrity, and reactive oxygen species (ROS) formation in both cell types. Kinetic analysis indicated that ROS formation is best detectable 30 min following initial treatment, whereas cytotoxic effects were most stable after 24 h. For hepatocytes, high-content imaging was also used to evaluate cytotoxicity and cytoskeletal integrity, as well as mitochondrial integrity and the potential for lipid accumulation. Lipid accumulation, a marker for hepatic steatosis, was most reliably detected 48 h following treatment with test compounds. Overall, our results demonstrate how a compendium of assays can be utilized for quantitative screening of chemical effects in iPSC cardiomyocytes and hepatocytes and enable rapid and cost-efficient multidimensional biological profiling of toxicity.

High-content assays for characterizing the viability and morphology of 3D cancer spheroid cultures.

There is an increasing interest in using three-dimensional (3D) spheroids for modeling cancer and tissue biology to accelerate translation research. Development of higher throughput assays to quantify phenotypic changes in spheroids is an active area of investigation. The goal of this study was to develop higher throughput high-content imaging and analysis methods to characterize phenotypic changes in human cancer spheroids in response to compound treatment. We optimized spheroid cell culture protocols using low adhesion U-bottom 96- and 384-well plates for three common cancer cell lines and improved the workflow with a one-step staining procedure that reduces assay time and minimizes variability. We streamlined imaging acquisition by using a maximum projection algorithm that combines cellular information from multiple slices through a 3D object into a single image, enabling efficient comparison of different spheroid phenotypes. A custom image analysis method was implemented to provide multiparametric characterization of single-cell and spheroid phenotypes. We report a number of readouts, including quantification of marker-specific cell numbers, measurement of cell viability and apoptosis, and characterization of spheroid size and shape. Assay performance was assessed using established anticancer cytostatic and cytotoxic drugs. We demonstrated concentration-response effects for different readouts and measured IC50 values, comparing 3D spheroid results to two-dimensional cell cultures. Finally, a library of 119 approved anticancer drugs was screened across a wide range of concentrations using HCT116 colon cancer spheroids. The proposed methods can increase performance and throughput of high-content assays for compound screening and evaluation of anticancer drugs with 3D cell models.

High-content assays for hepatotoxicity using induced pluripotent stem cell-derived cells.

Development of predictive in vitro assays for early toxicity evaluation is extremely important for improving the drug development process and reducing drug attrition rates during clinical development. High-content imaging-based in vitro toxicity assays are emerging as efficient tools for safety and efficacy testing to improve drug development efficiency. In this report we have used an induced pluripotent stem cell (iPSC)-derived hepatocyte cell model having a primary tissue-like phenotype, unlimited availability, and the potential to compare cells from different individuals. We examined a number of assays and phenotypic markers and developed automated screening methods for assessing multiparameter readouts of general and mechanism-specific hepatotoxicity. Endpoints assessed were cell viability, nuclear shape, average and integrated cell area, mitochondrial membrane potential, phospholipid accumulation, cytoskeleton integrity, and apoptosis. We assayed compounds with known mechanisms of toxicity and also evaluated a diverse hepatotoxicity library of 240 compounds. We conclude that high-content automated screening assays using iPSC-derived hepatocytes are feasible, provide information about mechanisms of toxicity, and can facilitate the safety assessment of drugs and chemicals.

High-content high-throughput assays for characterizing the viability and morphology of human iPSC-derived neuronal cultures.

Abstract Development of quantitative high-throughput in vitro assays that enable assessment of viability and morphological changes in neuronal cells is an active area of investigation in drug discovery and environmental chemical safety assessment. High-content imaging is an emerging and efficient tool for generating multidimensional quantitative cellular readouts; in addition, human induced pluripotent stem cell (iPSC)-derived neurons are a promising in vitro model system that emulates both the functionality and behavior of mature neurons, and they are available in quantities sufficient for screening workflows. The goal of this study was to develop high-content imaging and analysis methods to assess multiple phenotypes in human iPSC-derived neuronal cells. Specifically, we optimized cell culture, staining, and imaging protocols in a 384-well assay format and improved laboratory workflow by designing a one-step procedure to reduce assay time and minimize cell disturbance. Phenotypic readouts include quantitative characterization of neurite outgrowth and branching, cell number and viability, as well as measures of adverse effects on mitochondrial integrity and membrane potential. To verify the robustness of the workflow, we tested a series of compounds that are established toxicants. We report concentration-response effects of selected test compounds on human iPSC-derived neuronal cells and illustrate how the proposed methods may be used for high-content high-throughput compound toxicity screening and safety evaluation of drugs and environmental chemicals.

Multiparameter in vitro assessment of compound effects on cardiomyocyte physiology using iPSC cells.

A large percentage of drugs fail in clinical studies due to cardiac toxicity; thus, development of sensitive in vitro assays that can evaluate potential adverse effects on cardiomyocytes is extremely important for drug development. Human cardiomyocytes derived from stem cell sources offer more clinically relevant cell-based models than those presently available. Human-induced pluripotent stem cell-derived cardiomyocytes are especially attractive because they express ion channels and demonstrate spontaneous mechanical and electrical activity similar to adult cardiomyocytes. Here we demonstrate techniques for measuring the impact of pharmacologic compounds on the beating rate of cardiomyocytes with ImageXpress Micro and FLIPR Tetra systems. The assays employ calcium-sensitive dyes to monitor changes in Ca(2+) fluxes synchronous with cell beating, which allows monitoring of the beat rate, amplitude, and other parameters. We demonstrate here that the system is able to detect concentration-dependent atypical patterns caused by hERG inhibitors and other ion channel blockers. We also show that both positive and negative chronotropic effects on cardiac rate can be observed and IC(50) values determined. This methodology is well suited for safety testing and can be used to estimate efficacy and dosing of drug candidates prior to clinical studies.

Hypoxia mediates low cell-cycle activity and increases the proportion of long-term-reconstituting hematopoietic stem cells during in vitro culture.

OBJECTIVE: Recent evidence suggests that hematopoietic stem cells (HSCs) in the bone marrow (BM) are located in areas where the environment is hypoxic. Although previous studies have demonstrated positive effects by hypoxia, its role in HSC maintenance has not been fully elucidated, neither has the molecular mechanisms been delineated. Here, we have investigated the consequence of in vitro incubation of HSCs in hypoxia prior to transplantation and analyzed the role of hypoxia-inducible factor (HIF)-1alpha. MATERIALS AND METHODS: HSC and progenitor populations isolated from mouse BM were cultured in 20% or 1% O(2), and analyzed for effects on cell cycle, expression of cyclin-dependent kinase inhibitors genes, and reconstituting ability to lethally irradiated mice. The involvement of HIF-1alpha was studied using methods of protein stabilization and gene silencing. RESULTS: When long-term FLT3(-)CD34(-) Lin(-)Sca-1(+)c-Kit(+) (LSK) cells were cultured in hypoxia, cell numbers were significantly reduced in comparison to normoxia. This was due to a decrease in proliferation and more cells accumulating in G(0). Moreover, the proportion of HSCs with long-term engraftment potential was increased. Whereas expression of the cyclin-dependent kinase inhibitor genes p21(cip1), p27(Kip1), and p57(Kip2) increased in LSK cells by hypoxia, only p21(cip1) was upregulated in FLT3(-)CD34(-)LSK cells. We could demonstrate that expression of p27(Kip1) and p57(Kip2) was dependent of HIF-1alpha. Surprisingly, overexpression of constitutively active HIF-1alpha or treatment with the HIF stabilizer agent FG-4497 led to a reduction in HSC reconstituting ability. CONCLUSIONS: Our results imply that hypoxia, in part via HIF-1alpha, maintains HSCs by decreasing proliferation and favoring quiescence.

Lipid mobility and molecular binding in fluid lipid membranes.

The lateral mobility of dilute concentrations of fluorescently labeled lipids doped into supported membranes is found to change upon receptor ligand binding at the membrane surface, even when the lipid is not directly involved in the binding event. Experiments using membrane microarrays are performed that illustrate the use of lipid mobility measurements as an effectively label-free strategy of detecting binding on membrane surfaces.