High Sensitive pH Sensor Based on AlInN/GaN Heterostructure Transistor.

The AlInN/GaN high-electron-mobility-transistor (HEMT) indicates better performances compared with the traditional AlGaN/GaN HEMTs. The present work investigated the pH sensor functionality of an analogous HEMT AlInN/GaN device with an open gate. It was shown that the Al0.83In0.17N/GaN device demonstrates excellent pH sense functionality in aqueous solutions, exhibiting higher sensitivity (−30.83 μA/pH for AlInN/GaN and −4.6 μA/pH for AlGaN/GaN) and a faster response time, lower degradation and good stability with respect to the AlGaN/GaN device, which is attributed to higher two-dimensional electron gas (2DEG) density and a thinner barrier layer in Al0.83In0.17N/GaN owning to lattice matching. On the other hand, the open gate geometry was found to affect the pH sensitivity obviously. Properly increasing the width and shortening the length of the open gate area could enhance the sensitivity. However, when the open gate width is too larger or too small, the pH sensitivity would be suppressed conversely. Designing an optimal ratio of the width to the length is important for achieving high sensitivity. This work suggests that the AlInN/GaN-based 2DEG carrier modulated devices would be good candidates for high-performance pH sensors and other related applications.

AlGaN/GaN High Electron Mobility Transistor-Based Biosensor for the Detection of C-Reactive Protein.

In this paper, we propose an AlGaN/GaN high electron mobility transistor (HEMT)-based biosensor for the detection of C-reactive protein (CRP) using a null-balancing circuit. A null-balancing circuit was used to measure the output voltage of the sensor directly. The output voltage of the proposed biosensor was varied by antigen-antibody interactions on the gate surface due to CRP charges. The AlGaN/GaN HFET-based biosensor with null-balancing circuit applied shows that CRP can be detected in a wide range of concentrations, varying from 10 ng/mL to 1000 ng/mL. X-ray photoelectron spectroscopy was carried out to verify the immobilization of self-assembled monolayer with Au on the gated region.

Performance of AlGaN/GaN Nanowire Omega-Shaped-Gate Fin-Shaped Field-Effect Transistor.

The AlGaN/GaN nanowire omega-shaped-gate FinFET have been successfully fabricated demonstrating much improved performance compared to conventional AlGaN/GaN MISHFET. The AlGaN/GaN omega-shaped-gate FinFET exhibited the remarkable on-state performances, such as maximum drain current of 1.1 A/mm, low on-resistance, and low current collapse compared to that of the conventional device structure. In addition, the excellent off-state performances were measured: low off-state leakage current as low as -10(-10) mA, the theoretical SS value of -62 mV/dec, and high I(ON)/I(OFF) ratio (-10(9)). Improved dc performances were obtained for omega-shaped-gate structure due to the fully depletion of the active fin body and perfectly separation of the depleted fin from the underlying thick GaN buffer layer. Furthermore, the additional reason for the enhanced device performance of the proposed device is the improved gate controllability compared to the conventional MISHFET. The proposed nano-structure device is very promising candidate for the steep switching device applications.

Design and analysis of vertical-channel gallium nitride (GaN) junctionless nanowire transistors (JNT).

Vertical-channel gallium nitride (GaN) junctionless nanowire transistor (JNT) has been designed and characterized by technology computer-aided design (TCAD) simulations. Various characteristics such as wide bandgap, strong polariztion field, and high electron velocity make GaN one of the attractive materials in advanced electronics in recent times. Nanowire-structured GaN can be applicable to various transistors for enhanced electrical performances by its geometrical feature. In this paper, we analyze the direct-current (DC) characteristics depending on various channel doping concentrations (N(ch)) and nanowire radii (R(NW)). Furthermore, the radio-frequency (RF) characteristics under optimized conditions are extracted by small-signal equivalent circuit modeling. For the optimally designed vertical GaN JNT demonstrated on-state current (I(on)) of 345 µA/µm and off-state current (I(off)) of 3.7 x 10(-18) A/µm with a threshold voltage (V(t)) of 0.22 V, and subthreshold swing (S) of 68 mV/dec. Besides, f(T) and f(max) under different operating conditions (gate voltage, V(GS)) have been obtained.