Manipulation of Oxygen Species on an Antimony-Modified Copper Surface to Tune the Product Selectivity in CO2 Electroreduction.

Rational regulation of the electrochemical CO2 reduction reaction (CO2RR) pathway to produce desired products is particularly interesting, yet designing economical and robust catalysts is crucial. Here, we report an antimony-modified copper (CuSb) catalyst capable of selectively producing both CO and multicarbon (C2+) products in the CO2RR. At a current density of 0.3 A/cm2, the faradaic efficiency (FE) of CO was as high as 98.2% with a potential of -0.6 V vs reversible hydrogen electrode (RHE). When the current density increased to 1.1 A/cm2 at -1.1 V vs RHE, the primary products shifted to C2+ compounds with a FE of 75.6%. Experimental and theoretical studies indicate that tuning the potential could manipulate the oxygen species on the CuSb surface, which determined the product selectivity in the CO2RR. At a more positive potential, the existence of oxygen species facilitates the potential-limiting step involving *COOH formation and reduces the adsorption of *CO intermediates, thereby promoting CO production. At a more negative potential, the localized high CO concentration coupled with the enhanced adsorption of *CO intermediates due to Sb incorporation facilitates C-C coupling and deep hydrogenation processes, resulting in an increased C2+ selectivity.

Synthesis of Hydroxylamine via Ketone-Mediated Nitrate Electroreduction.

Hydroxylamine (HA, NH2OH) is a critical feedstock in the production of various chemicals and materials, and its efficient and sustainable synthesis is of great importance. Electroreduction of nitrate on Cu-based catalysts has emerged as a promising approach for green ammonia (NH3) production, but the electrosynthesis of HA remains challenging due to overreduction of HA to NH3. Herein, we report the first work on ketone-mediated HA synthesis using nitrate in water. A metal-organic-framework-derived Cu catalyst was developed to catalyze the reaction. Cyclopentanone (CP) was used to capture HA in situ to form CP oxime (CP-O) with C═N bonds, which is prone to hydrolysis. HA could be released easily after electrolysis, and CP was regenerated. It was demonstrated that CP-O could be formed with an excellent Faradaic efficiency of 47.8%, a corresponding formation rate of 34.9 mg h-1 cm-2, and a remarkable carbon selectivity of >99.9%. The hydrolysis of CP-O to release HA and CP regeneration was also optimized, resulting in 96.1 mmol L-1 of HA stabilized in the solution, which was significantly higher than direct nitrate reduction. Detailed in situ characterizations, control experiments, and theoretical calculations revealed the catalyst surface reconstruction and reaction mechanism, which showed that the coexistence of Cu0 and Cu+ facilitated the protonation and reduction of *NO2 and *NH2OH desorption, leading to the enhancement for HA production.

Urea Synthesis via Coelectrolysis of CO2 and Nitrate over Heterostructured Cu-Bi Catalysts.

Electrocatalytic coupling of CO2 and NO3- to urea is a promising way to mitigate greenhouse gas emissions, reduce waste from industrial processes, and store renewable energy. However, the poor selectivity and activity limit its application due to the multistep process involving diverse reactants and reactions. Herein, we report the first work to design heterostructured Cu-Bi bimetallic catalysts for urea electrosynthesis. A high urea Faradaic efficiency (FE) of 23.5% with a production rate of 2180.3 µg h-1 mgcat-1 was achieved in H-cells, which surpassed most reported electrocatalysts in the literature. Moreover, the catalyst had a remarkable recycling stability. Experiments and density functional theory calculations demonstrated that introduction of moderate Bi induced the formation of the Bi-Cu/O-Bi/Cu2O heterostructure with abundant phase boundaries, which are beneficial for NO3-, CO2, and H2O activation and enhance C-N coupling and promote *HONCON intermediate formation. Moreover, favorable *HNCONH2 protonation and urea desorption processes were also validated, further explaining the reason for high activity and selectivity toward urea.

Highly Efficient Electrosynthesis of Glycine over an Atomically Dispersed Iron Catalyst.

Glycine is a nonessential amino acid that plays a vital role in various biological activities. However, the conventional synthesis of glycine requires sophisticated procedures or toxic feedstocks. Herein, we report an electrochemical pathway for glycine synthesis via the reductive coupling of oxalic acid and nitrate or nitrogen oxides over atomically dispersed Fe-N-C catalysts. A glycine selectivity of 70.7% is achieved over Fe-N-C-700 at -1.0 V versus RHE. Synergy between the FeN3C structure and pyrrolic nitrogen in Fe-N-C-700 facilitates the reduction of oxalic acid to glyoxylic acid, which is crucial for producing glyoxylic acid oxime and glycine, and the FeN3C structure could reduce the energy barrier of *HOOCCH2NH2 intermediate formation thus accelerating the glyoxylic acid oxime conversion to glycine. This new synthesis approach for value-added chemicals using simple carbon and nitrogen sources could provide sustainable routes for organonitrogen compound production.

Nitrogenous Intermediates in NOx-involved Electrocatalytic Reactions.

Chemical manufacturing utilizing renewable sources and energy emerges as a promising path towards sustainability and carbon neutrality. The electrocatalytic reactions involving nitrogen oxides (NOx) offered a potential strategy for synthesizing various nitrogenous chemicals. However, it is currently hindered by low selectivity/efficiency and limited reaction pathways, mainly due to the difficulties in controllable generation and utilization of nitrogenous intermediates. In this minireview, focusing on nitrogenous intermediates in NOx-involved electrocatalytic reactions, we discuss newly developed methodologies for studying and controlling the generation, conversion, and utilizing of nitrogenous intermediates, which enable recent developments in NOx-involved electrocatalytic reactions that yield various products, including ammonia (NH3), organonitrogen molecules, and nitrogenous compounds exhibiting unconventional oxidation states. Furthermore, we also make an outlook to highlight future directions in the emerging field of NOx-involved electrocatalytic reactions.

In situ Generation of Cyclohexanone Drives Electrocatalytic Upgrading of Phenol to Nylon-6 Precursor.

Coupling in situ generated intermediates with other substrates/intermediates is a viable approach for diversifying product outcomes of catalytic reactions involving two or multiple reactants. Cyclohexanone oxime is a key precursor for caprolactam synthesis (the monomer of Nylon-6), yet its current production uses unsustainable carbon sources, noble metal catalysts, and harsh conditions. Herein, we report the first work to synthesize cyclohexanone oxime through electroreduction of phenol and hydroxylamine. The Faradaic efficiency reached 69.1 % over Cu catalyst, accompanied by a corresponding cyclohexanone oxime formation rate of 82.0 g h-1 gcat -1. In addition, the conversion of phenol was up to 97.5 %. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of water, phenol, and hydroxylamine substrates on the optimal metallic Cu catalyst for achieving high-performance cyclohexanone oxime synthesis. Besides, a tandem catalytic route for the upgrading of lignin to caprolactam has been successfully developed through the integration of thermal catalysis, electrocatalysis, and Beckmann rearrangement, which achieved the synthesis of 0.40 g of caprolactam from 4.0 g of lignin raw material.

Dual-Metal Sites Drive Tandem Electrocatalytic CO2 to C2+ Products.

The electrochemical conversion of CO2 into valuable chemicals is a promising route for renowable energy storage and the mitigation of greenhouse gas emission, and production of multicarbon (C2+) products is highly desired. Here, we report a 1.4 %Pd-Cu@CuPz2 comprising of dispersive CuOx and PdO dual nanoclusters embedded in the MOF CuPz2 (Pz=Pyrazole), which achieves a high C2+ Faradaic efficiency (FEC2+) of 81.9 % and C2+ alcohol FE of 47.5 % with remarkable stability when using 0.1 M KCl aqueous solution as electrolyte in a typical H-cell. Particularly, the FE of alcohol is obviously improved on 1.4 %Pd-Cu@CuPz2 compared to Cu@CuPz2. Theoretical calculations have revealed that the enhanced interfacial electron transfer facilitates the adsorption of *CO intermediate and *CO-*CO dimerization on the Cu-Pd dual sites bridged by Cu nodes of CuPz2. Additionally, the oxophilicity of Pd can stabilize the key intermediate *CH2CHO and promote subsequent proton-coupled electron transfer more efficiently, confirming that the formation pathway is skew towards *C2H5OH. Consequently, the Cu-Pd dual sites play a synergistic tandem role in cooperatively improving the selectivity of alcohol and accelerating reductive conversion of CO2 to C2+.

Highly Selective CO2 Electroreduction to Multi-Carbon Alcohols via Amine Modified Copper Nanoparticles at Acidic Conditions.

Electroreduction of CO2 into multi-carbon (C2+) products (e.g. C2+ alcohols) offers a promising way for CO2 utilization. Use of strong alkaline electrolytes is favorable to producing C2+ products. However, CO2 can react with hydroxide to form carbonate/bicarbonate, which results in low carbon utilization efficiency and poor stability. Using acidic electrolyte is an efficient way to solve the problems, but it is a challenge to achieve high selectivity of C2+ products. Here we report that the amine modified copper nanoparticles exhibit high selectivity of C2+ products and carbon utilization at acidic condition. The Faradaic efficiency (FE) of C2+ products reach up to 81.8 % at acidic media (pH=2) with a total current density of 410 mA cm-2 over n-butylamine modified Cu. Especially the FE of C2+ alcohols is 52.6 %, which is higher than those reported for CO2 electroreduction at acidic condition. In addition, the single-pass carbon efficiency towards C2+ production reach up to 60 %. Detailed studies demonstrate that the amine molecule on the surface of Cu cannot only enhance the formation, adsorption and coverage of *CO, but also provide a hydrophobic environment, which result in the high selectivity of C2+ alcohols at acidic condition.

Switching Reaction Pathways of CO2 Electroreduction by Modulating Cations in the Electrochemical Double Layer.

Tuning the selectivity of CO2 electroreduction reaction (CO2RR) solely by changing electrolyte is a very attractive topic. In this study, we conducted CO2RR in different aqueous electrolytes over bulk metal electrodes. It was discovered that controlled CO2RR could be achieved by modulating cations in the electrochemical double layer. Specifically, ionic liquid cations in the electrolyte significantly inhibits the hydrogen evolution reaction (HER), while yielding high Faraday efficiencies toward CO (FECO) or formate (FEformate) depending on the alkali metal cations. For example, the product could be switched from CO (FECO=97.3 %) to formate (FEformate=93.5 %) by changing the electrolyte from 0.1 M KBr-0.5 M 1-octyl-3-methylimidazolium bromide (OmimBr) to 0.1 M CsBr-0.5 M OmimBr aqueous solutions over pristine Cu foil electrode. In situ spectroscopy and theoretical calculations reveal that the ordered structure generated by the assembly of Omim+ under an applied negative potential alters the hydrogen bonding structure of the interfacial water, thereby inhibiting the HER. The difference in selectivity in the presence of different cations is attributed to the hydrogen bonding effect caused by Omim+, which alters the solvated structure of the alkali metal cations and thus affects the stabilization of intermediates of different pathways.

Switching between C2+ Products and CH4 in CO2 Electrolysis by Tuning the Composition and Structure of Rare-Earth/Copper Catalysts.

Rational regulation of the reaction pathway to produce the desired products is one of the most significant challenges in the electrochemical CO2 reduction reaction (CO2RR). Herein, we designed a series of rare-earth Cu catalysts with mixed phases. It was found that the products could be switched from C2+ to CH4 by tuning the composition and structure of the catalysts. Particularly at the Cu/Sm atomic ratio of 9/1 (Cu9Sm1-Ox), the Faradaic efficiency (FE) for C2+ products (FEC2+) could reach 81% at 700 mA cm-2 with negligible CH4. However, the FE of CH4 (FECH4) was 65% at 500 mA cm-2 over Cu1Sm9-Ox (Cu/Sm = 1/9), and the FEC2+ was extremely low. Experiments and theoretical studies indicated that the stable CuSm2O4 phase existed in all the catalysts within the Cu/Sm range of 9/1 to 1/9. At a high Cu content, the catalyst was composed of CuSm2O4 and Cu phases. The small amount of Sm could enhance the binding strength of *CO and facilitate C-C coupling. Conversely, at a high Sm content, the catalyst was composed of CuSm2O4 and Sm2O3 phases. Sm could effectively stabilize bivalent Cu and enrich proton donors, lowering the reaction energy of *CO for deep hydrogenation to generate CH4. In both pathways, the stable CuSm2O4 phase could cooperate with the Cu or Sm2O3 phases, which induced the formation of different microenvironments to generate different products. This strategy also had commonality with other Cu-rare-earth (La, Pr, and Eu) catalysts to boost the CO2RR for C2+ or CH4 production.

p-d Orbital Hybridization Induced by p-Block Metal-Doped Cu Promotes the Formation of C2+ Products in Ampere-Level CO2 Electroreduction.

Large-current electrolysis of CO2 to multi-carbon (C2+) products is critical to realize the industrial application of CO2 conversion. However, the poor binding strength of *CO intermediates on the catalyst surface induces multiple competing pathways, which hinder the C2+ production. Herein, we report that p-d orbital hybridization induced by Ga-doped Cu (CuGa) could promote efficient CO2 electrocatalysis to C2+ products at ampere-level current density. It was found that CuGa exhibited the highest C2+ productivity with a remarkable Faradaic efficiency (FE) of 81.5% at a current density of 0.9 A/cm2, and the potential at such a high current density was -1.07 V versus reversible hydrogen electrode. At 1.1 A/cm2, the catalyst still maintained a high C2+ productivity with an FE of 76.9%. Experimental and theoretical studies indicated that the excellent performance of CuGa results from the p-d hybridization of Cu and Ga, which not only enriches reactive sites but also enhances the binding strength of the *CO intermediate and facilitates C-C coupling. The p-d hybridization strategy can be extended to other p-block metal-doped Cu catalysts, such as CuAl and CuGe, to boost CO2 electroreduction for C2+ production. As far as we know, this is the first work to promote electrochemical CO2 reduction reaction to generate the C2+ product by p-d orbital hybridization interaction using a p-block metal-doped Cu catalyst.

Improving CO2-to-C2+ Product Electroreduction Efficiency via Atomic Lanthanide Dopant-Induced Tensile-Strained CuOx Catalysts.

Cu is a promising electrocatalyst in CO2 reduction reaction (CO2RR) to high-value C2+ products. However, as important C-C coupling active sites, the Cu+ species is usually unstable under reduction conditions. How atomic dopants affect the performance of Cu-based catalysts is interesting to be studied. Herein, we first calculated the difference between the thermodynamic limiting potentials of CO2RR and the hydrogen evolution reaction, as well as the *CO binding energy over Cu2O doped with different metals, and the results indicated that doping atomic Gd into Cu2O could improve the performance of the catalyst effectively. On the basis of the theoretical study, we designed Gd1/CuOx catalysts. The distinctive electronic structure and large ion radii of Gd not only keep the Cu+ species stable during the reaction but also induce tensile strain in Gd1/CuOx, resulting in excellent performance of the catalysts for electroreduction of CO2 to C2+ products. The Faradic efficiency of C2+ products could reach 81.4% with a C2+ product partial current density of 444.3 mA cm-2 at -0.8 V vs a reversible hydrogen electrode. Detailed experimental and theoretical studies revealed that Gd doping enhanced CO2 activation on the catalyst, stabilized the key intermediate O*CCO, and reduced the energy barrier of the C-C coupling reaction.

Oxophilicity-Controlled CO2 Electroreduction to C2+ Alcohols over Lewis Acid Metal-Doped Cuδ+ Catalysts.

Cu-based electrocatalysts have great potential for facilitating CO2 reduction to produce energy-intensive fuels and chemicals. However, it remains challenging to obtain high product selectivity due to the inevitable strong competition among various pathways. Here, we propose a strategy to regulate the adsorption of oxygen-associated active species on Cu by introducing an oxophilic metal, which can effectively improve the selectivity of C2+ alcohols. Theoretical calculations manifested that doping of Lewis acid metal Al into Cu can affect the C-O bond and Cu-C bond breaking toward the selectively determining intermediate (shared by ethanol and ethylene), thus prioritizing the ethanol pathway. Experimentally, the Al-doped Cu catalyst exhibited an outstanding C2+ Faradaic efficiency (FE) of 84.5% with remarkable stability. In particular, the C2+ alcohol FE could reach 55.2% with a partial current density of 354.2 mA cm-2 and a formation rate of 1066.8 µmol cm-2 h-1. A detailed experimental study revealed that Al doping improved the adsorption strength of active oxygen species on the Cu surface and stabilized the key intermediate *OC2H5, leading to high selectivity toward ethanol. Further investigation showed that this strategy could also be extended to other Lewis acid metals.

High-Rate CO2 Electrolysis to Formic Acid over a Wide Potential Window: An Electrocatalyst Comprised of Indium Nanoparticles on Chitosan-Derived Graphene.

Realizing industrial-scale production of HCOOH from the CO2 reduction reaction (CO2 RR) is very important, but the current density as well as the electrochemical potential window are still limited to date. Herein, we achieved this by integration of chemical adsorption and electrocatalytic capabilities for the CO2 RR via anchoring In nanoparticles (NPs) on biomass-derived substrates to create In/X-C (X=N, P, B) bifunctional active centers. The In NPs/chitosan-derived N-doped defective graphene (In/N-dG) catalyst had outstanding performance for the CO2 RR with a nearly 100 % Faradaic efficiency (FE) of HCOOH across a wide potential window. Particularly, at 1.2 A ⋅ cm-2 high current density, the FE of HCOOH was as high as 96.0 %, and the reduction potential was as low as -1.17 V vs RHE. When using a membrane electrode assembly (MEA), a pure HCOOH solution could be obtained at the cathode without further separation and purification. The FE of HCOOH was still up to 93.3 % at 0.52 A ⋅ cm-2 , and the HCOOH production rate could reach 9.051 mmol ⋅ h-1 ⋅ cm-2 . Our results suggested that the defects and multilayer structure in In/N-dG could not only enhance CO2 chemical adsorption capability, but also trigger the formation of an electron-rich catalytic environment around In sites to promote the generation of HCOOH.

Boosting Electrocatalytic Nitrate-to-Ammonia via Tuning of N-Intermediate Adsorption on a Zn-Cu Catalyst.

The renewable-energy-powered electroreduction of nitrate (NO3 - ) to ammonia (NH3 ) has garnered significant interest as an eco-friendly and promising substitute for the Haber-Bosch process. However, the sluggish kinetics hinders its application at a large scale. Herein, we first calculated the N-containing species (*NO3 and *NO2 ) binding energy and the free energy of the hydrogen evolution reaction over Cu with different metal dopants, and it was shown that Zn was a promising candidate. Based on the theoretical study, we designed and synthesized Zn-doped Cu nanosheets, and the as-prepared catalysts demonstrated excellent performance in NO3 - -to-NH3 . The maximum Faradaic efficiency (FE) of NH3 could reach 98.4 % with an outstanding yield rate of 5.8 mol g-1 h-1 , which is among the best results up to date. The catalyst also had excellent cycling stability. Meanwhile, it also presented a FE exceeding 90 % across a wide potential range and NO3 - concentration range. Detailed experimental and theoretical studies revealed that the Zn doping could modulate intermediates adsorption strength, enhance NO2 - conversion, change the *NO adsorption configuration to a bridge adsorption, and decrease the energy barrier, leading to the excellent catalytic performance for NO3 - -to-NH3 .

Synergy of Cu/C3 N4 Interface and Cu Nanoparticles Dual Catalytic Regions in Electrolysis of CO to Acetic Acid.

Electrochemical reduction reaction of carbon monoxide (CORR) offers a promising way to manufacture acetic acid directly from gaseous CO and water at mild condition. Herein, we discovered that the graphitic carbon nitride (g-C3 N4 ) supported Cu nanoparticles (Cu-CN) with the appropriate size showed a high acetate faradaic efficiency of 62.8 % with a partial current density of 188 mA cm-2 in CORR. In situ experimental and density functional theory calculation studies revealed that the Cu/C3 N4 interface and metallic Cu surface synergistically promoted CORR into acetic acid. The generation of pivotal intermediate -*CHO is advantage around the Cu/C3 N4 interface and migrated *CHO facilitates acetic acid generation on metallic Cu surface with promoted *CHO coverage. Moreover, continuous production of acetic acid aqueous solution was achieved in a porous solid electrolyte reactor, indicating the great potential of Cu-CN catalyst in the industrial application.

Morphological, transcriptomic and metabolomic analyses of Sophora davidii mutants for plant height.

Sophora davidii is an important plant resource in the karst region of Southwest China, but S. davidii plant-height mutants are rarely reported. Therefore, we performed phenotypic, anatomic structural, transcriptomic and metabolomic analyses to study the mechanisms responsible for S. davidii plant-height mutants. Phenotypic and anatomical observations showed that compared to the wild type, the dwarf mutant displayed a significant decrease in plant height, while the tall mutant displayed a significant increase in plant height. The dwarf mutant cells were smaller and more densely arranged, while those of the wild type and the tall mutant were larger and loosely arranged. Transcriptomic analysis revealed that differentially expressed genes (DEGs) involved in cell wall biosynthesis, expansion, phytohormone biosynthesis, signal transduction pathways, flavonoid biosynthesis and phenylpropanoid biosynthesis were significantly enriched in the S. davidii plant-height mutants. Metabolomic analysis revealed 57 significantly differential metabolites screened from both the dwarf and tall mutants. A total of 8 significantly different flavonoid compounds were annotated to LIPID MAPS, and three metabolites (chlorogenic acid, kaempferol and scopoletin) were involved in phenylpropanoid biosynthesis and flavonoid biosynthesis. These results shed light on the molecular mechanisms of plant height in S. davidii mutants and provide insight for further molecular breeding programs.

Boosting the Productivity of Electrochemical CO2 Reduction to Multi-Carbon Products by Enhancing CO2 Diffusion through a Porous Organic Cage.

Electroreduction of CO2 into valuable fuels and feedstocks offers a promising way for CO2 utilization. However, the commercialization is limited by the low productivity. Here, we report a strategy to enhance the productivity of CO2 electroreduction by improving diffusion of CO2 to the surface of catalysts using porous organic cages (POCs) as an additive. It was noted that the Faradaic efficiency (FE) of C2+ products could reach 76.1 % with a current density of 1.7 A cm-2 when Cu-nanorod(nr)/CC3 (one of the POCs) was used, which were much higher than that using Cu-nr. Detailed studies demonstrated that the hydrophobic pores of CC3 can adsorb a large amount of CO2 for the reaction, and the diffusion of CO2 in the CC3 to the nanocatalyst surface is easier than that in the liquid electrolyte. Thus, more CO2 molecules make contact with the nanocatalysts in the presence of CC3, enhancing CO2 reduction and inhibiting generation of H2 .

In Situ Periodic Regeneration of Catalyst during CO2 Electroreduction to C2+ Products.

Developing electrocatalytic reactions with high-efficiency can make important contributions to carbon neutrality. However, poor long-term stability of catalysts is a bottleneck for its practical application. Herein, an "in situ periodic regeneration of catalyst (PR-C)" strategy is proposed to give long-term high efficiency of CO2 electroreduction to generate C2+ products over Cu catalyst by applying a positive potential pulse for a short time periodically in the halide-containing electrolyte. The high Faradaic efficiency (81.2 %) and current density (22.6 mA cm-2 ) could be maintained completely at least 36 h, while the activity and selectivity decreased continuously without using the PR-C method. Control experiments and operando characterization demonstrated that the surface structure and oxidation state of Cu could be recovered periodically by the PR-C method, which was beneficial for CO2 activation and C-C coupling.

Atomic Indium Catalysts for Switching CO2 Electroreduction Products from Formate to CO.

Electrochemical reduction of CO2 to chemicals and fuels is an interesting and attractive way to mitigate greenhouse gas emissions and energy shortages. In this work, we report the use of atomic In catalysts for CO2 electroreduction to CO. The atomic In catalysts were anchored on N-doped carbon (InA/NC) through pyrolysis of In-based metal-organic frameworks (MOFs) and dicyandiamide. It was discovered that InA/NC had outstanding performance for selective CO production in the mixed electrolyte of ionic liquid/MeCN. It is different from those common In-based materials, in which formate/formic acid is formed as the main product. The faradaic efficiency (FE) of CO and total current density were 97.2% and 39.4 mA cm-2, respectively, with a turnover frequency (TOF) of ∼40 000 h-1. It is one of the highest TOF for CO production to date for all of the catalysts reported. In addition, the catalyst had remarkable stability. Detailed study indicated that InA/NC had higher double-layer capacitance, larger CO2 adsorption capacity, and lower interfacial charge transfer resistance, leading to high activity for CO2 reduction. Control experiments and theoretical calculations showed that the In-N site of InA/NC is not only beneficial for dissociation of COOH* to form CO but also hinders formate formation, leading to high selectivity toward CO instead of formate.