High-performance fibre battery with polymer gel electrolyte.

Replacement of liquid electrolytes with polymer gel electrolytes is recognized as a general and effective way of solving safety problems and achieving high flexibility in wearable batteries1-6. However, the poor interface between polymer gel electrolyte and electrode, caused by insufficient wetting, produces much poorer electrochemical properties, especially during the deformation of the battery7-9. Here we report a strategy for designing channel structures in electrodes to incorporate polymer gel electrolytes and to form intimate and stable interfaces for high-performance wearable batteries. As a demonstration, multiple electrode fibres were rotated together to form aligned channels, while the surface of each electrode fibre was designed with networked channels. The monomer solution was effectively infiltrated first along the aligned channels and then into the networked channels. The monomers were then polymerized to produce a gel electrolyte and form intimate and stable interfaces with the electrodes. The resulting fibre lithium-ion battery (FLB) showed high electrochemical performances (for example, an energy density of about 128 Wh kg-1). This strategy also enabled the production of FLBs with a high rate of 3,600 m h-1 per winding unit. The continuous FLBs were woven into a 50 cm × 30 cm textile to provide an output capacity of 2,975 mAh. The FLB textiles worked safely under extreme conditions, such as temperatures of -40 °C and 80 °C and a vacuum of -0.08 MPa. The FLBs show promise for applications in firefighting and space exploration.

A rechargeable calcium-oxygen battery that operates at room temperature.

Calcium-oxygen (Ca-O2) batteries can theoretically afford high capacity by the reduction of O2 to calcium oxide compounds (CaOx) at low cost1-5. Yet, a rechargeable Ca-O2 battery that operates at room temperature has not been achieved because the CaOx/O2 chemistry typically involves inert discharge products and few electrolytes can accommodate both a highly reductive Ca metal anode and O2. Here we report a Ca-O2 battery that is rechargeable for 700 cycles at room temperature. Our battery relies on a highly reversible two-electron redox to form chemically reactive calcium peroxide (CaO2) as the discharge product. Using a durable ionic liquid-based electrolyte, this two-electron reaction is enabled by the facilitated Ca plating-stripping in the Ca metal anode at room temperature and improved CaO2/O2 redox in the air cathode. We show the proposed Ca-O2 battery is stable in air and can be made into flexible fibres that are weaved into textile batteries for next-generation wearable systems.

All-Metal Flexible Fiber by Continuously Assembling Nanowires for High Electrical Conductivity.

Fiber electronics booms as a new important field but is currently limited by the challenge of finding both highly flexible and conductive fiber electrodes. Here, all-metal fibers based on nanowires are discovered. Silver nanowires are continuously assembled into robust fibers by salt-induced aggregation and then firmly stabilized by plasmonic welding. The nanowire network structures provide them both high flexibility with moduli at the level of MPa and conductivities up to 106 S m-1. They also show excellent electrochemical properties such as low impedance and high electrochemically active surface area. Their stable chronic single-neuron recording is further demonstrated with good biocompatibility in vivo. These new fiber materials may provide more opportunities for the future development of fiber electronics.

Effect of jujube pulp on acid- and rennet-induced coagulation properties of milk.

Milk coagulation is an important step in the production of fermented dairy products such as yogurt and cheese. Jujube is gaining popularity and acceptance as a food ingredient. In China, jujube yogurt is popular among consumers. However, there is limited information on the effect of jujube on acid- and rennet-induced coagulation properties of milk. The objective of this study was to evaluate the effects of jujube pulp at different concentrations on acid- and rennet-induced coagulation kinetics of milk and the microstructure of acid- and rennet-induced gels. During acid-induced coagulation, with increasing jujube pulp concentration, the initial pH value decreased; however, the final pH value increased. The initial elasticity index (EI) value increased, and the time point at which the mean square displacement curves lost the linear trend advanced. The sample with 10% jujube pulp had the densest structure and highest EI value. During rennet-induced coagulation, with increasing jujube pulp concentration, the production rate and amount of caseinomacropeptide decreased, and the final EI value increased. Protein aggregates in rennet-induced gels became rough, and the sample with 20% jujube pulp had the highest EI value. This study provides a new perspective and understanding of the application of jujube in fermented dairy products.

Interaction of physical activity and low-level air pollution on cardiovascular disease: a prospective cohort study in UK Biobank.

To investigate the associations of physical activity (PA), low-level air pollution, and interaction on cardiovascular diseases (CVD) incidence based on the UK Biobank. PA was measured by the International Physical Activity Questionnaire and five air pollutants were estimated using Land Use Regression. All association estimates were based on Cox regression. Dose-response relationship was explored by restricted cubic spline, while multiplicative and additive interaction were examined by Pinteraction and relative excess risk due to interaction (RERI). As deviating proportional hazards assumption, we analyzed data as follow-up < 4 years and ≥ 4 years, separately. PA with 1000-4000 Metabolic Equivalent Task (MET) min/week showed the strongest protective impact on CVD incidence, while only low-level nitrogen dioxides (NO2) showed negative impact among five air pollutants and was considered for further analysis. Multiplicative interaction between PA and NO2 was observed during ≥ 4 years follow-up (Pinteraction = 0.049) while not during < 4 years (Pinteraction = 0.290). Positive additive interactions were found for high PA and low NO2 (< 20 µg/m3) group (RERI: 0.07, 95% confidence intervals: 0.02-0.11) during < 4 years, and for moderate PA with NO2 at 40- µg/m3 (0.07, 0.02-0.13) and < 20 µg/m3 (0.07, 0.02-0.12), while high PA showed similar results with NO2 at 40-, 20- and < 20 µg/m3 during ≥ 4 years. PA about 1000-4000 METs min/week showed the lowest CVD risk. Possibility of interaction with PA and NO2 is more likely to present with the increase in follow-up duration. We call for the optimal thresholds of PA, and exploring interaction thoroughly by considering types of PA.

[Genetic analysis of a family with epilepsy accompanied by developmental delay and brain deformity due to a de novo variant of TUBB2A gene].

OBJECTIVE: To explore the clinical manifestations and pathogenic variant in a family with epilepsy, developmental delay and brain deformity. METHODS: Clinical data of the child and his family members who had visited the Department of Pediatrics, Linyi People's Hospital on July 2, 2022 were collected. The child, his sister and parents were subjected to high-throughput sequencing, and the result was verified by Sanger sequencing. RESULTS: The child was a 6-year-old boy with developmentally delay and had epileptic seizures with fever sensitivity for four years. Cranial imaging showed brain dysplasia, while the video electroencephalogram showed abnormal discharge. High-throughput sequencing showed the child has harbored a heterozygous c.5G>T (p.Arg2Leu) variant of TUBB2A gene, which was unreported previously. His sister also carried the variant and had similar clinical manifestations, whilst his parents were of the wild-type and had normal clinical phenotypes. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), the variant was classified as pathogenic (PS2+PM2_Supporting+PM5+PP1+PP2+PP3). CONCLUSION: The heterozygous c.5G>T (p.Arg2Leu) variant of the TUBB2A gene, in the form of gonadal mosaicism, probably underlay the disorders in this family.

Construction of chitosan-gelatin polysaccharide-protein composite hydrogel via mechanical stretching and its biocompatibility in vivo.

Natural polysaccharides and protein macromolecules are the important components of extracellular matrix (ECM), but individual component generally exhibits weak mechanical property, limited biological function or strong immunogenicity in tissue engineering. Herein, gelatin (Gel) was deposited to the stretched (65 %) chitosan (CS) hydrogel substrates to fabricate the polysaccharide-protein CS-Gel-65 % composite hydrogels to mimic the natural component of ECM and improve the above deficiencies. CS hydrogel substrates under different stretching deformations exhibited tunable morphology, chemical property and wettability, having a vital influence on the secondary structures of deposited fibrous Gel protein, namely appearing with the decreased ß-sheet content in stretched CS hydrogel. Gel also produced a more homogenous distribution on the stretched CS hydrogel substrate due to the unfolding of Gel and increased interactions between Gel and CS than on the unstretched substrate. Moreover, the polysaccharide-protein composite hydrogel possessed enhanced mechanical property and oriented structure via stretching-drying method. Besides, in vivo subcutaneous implantation indicated that the CS-Gel-65 % composite hydrogel showed lower immunogenicity, thinner fibrous capsule, better angiogenesis effect and increased M2/M1 of macrophage phenotype. Polysaccharide-protein CS-Gel-65 % composite hydrogel offers a novel material as a tissue engineering scaffold, which could promote angiogenesis and build a good immune microenvironment for the damaged tissue repair.

PVP/aprepitant microcapsules produced by supercritical antisolvent process.

The supercritical antisolvent (SAS) process was a green alternative to improve the low bioavailability of insoluble drugs. However, it is difficult for SAS process to industrialize with limited production capacity. A coaxial annular nozzle was used to prepare the microcapsules of aprepitant (APR) and polyvinylpyrrolidone (PVP) by SAS with N, N-Dimethylformamide (DMF) as solvent. Meanwhile, the effects of polymer/drug ratio, operating pressure, operating temperature and overall concentration on particles morphology, mean particle diameter and size distribution were analyzed. Microcapsules with mean diameters ranging from 2.04 µm and 9.84 µm were successfully produced. The morphology, particle size, thermal behavior, crystallinity, drug content, drug dissolution and residual amount of DMF of samples were analyzed. The results revealed that the APR drug dissolution of the microcapsules by SAS process was faster than the unprocessed APR. Furthermore, the drug powder collected every hour is in the kilogram level, verifying the possibility to scale up the production of pharmaceuticals employing the SAS process from an industrial point of view.

The influence of low-temperature resistant lactic acid bacteria on the enhancement of quality and the microbial community in winter Jerusalem Artichoke (Helianthus tuberosus L.) silage on the Qinghai-Tibet Plateau.

Jerusalem Artichoke (Helianthus tuberosus L.), an emerging "food and fodder" economic crop on the Qinghai-Tibet Plateau. To tackle problems such as incomplete fermentation and nutrient loss occurring during the low-temperature ensilage of Jerusalem Artichokes in the plateau's winter, this study inoculated two strains of low-temperature resistant lactic acid bacteria, Lactobacillus plantarum (GN02) and Lactobacillus brevis (XN25), along with their mixed components, into Jerusalem Artichoke silage material. We investigated how low-temperature resistant lactic acid bacteria enhance the quality of low-temperature silage fermentation for Jerusalem Artichokes and clarify its mutual feedback effect with microorganisms. Results indicated that inoculating low-temperature resistant lactic acid bacteria significantly reduces the potential of hydrogen and water-soluble carbohydrates content of silage, while increasing lactic acid and acetic acid levels, reducing propionic acid, and preserving additional dry matter. Inoculating the L. plantarum group during fermentation lowers pH and propionic acid levels, increases lactic acid content, and maintains a dry matter content similar to the original material. Bacterial community diversity exhibited more pronounced changes than fungal diversity, with inoculation having a minor effect on fungal community diversity. Within the bacteria, Lactobacillus remains consistently abundant (>85%) in the inoculated L. plantarum group. At the fungal phylum and genus levels, no significant changes were observed following fermentation, and dominant fungal genera in all groups did not differ significantly from those in the raw material. L. plantarum exhibited a positive correlation with lactic acid and negative correlations with pH and propionic acid. In summary, the inoculation of L. plantarum GN02 facilitated the fermentation process, preserved an acidic silage environment, and ensured high fermentation quality; it is a suitable inoculant for low-temperature silage in the Qinghai-Tibet Plateau.

Increasing the Amounts of Bioactive Components in American Ginseng (Panax quinquefolium L.) Leaves Using Far-Infrared Irradiation.

Both the roots and leaves of American ginseng contain ginsenosides and polyphenols. The impact of thermal processing on enhancing the biological activities of the root by altering its component composition has been widely reported. However, the effects of far-infrared irradiation (FIR), an efficient heat treatment method, on the bioactive components of the leaves remain to be elucidated. In the present study, we investigated the effects of FIR heat treatment between 160 and 200 °C on the deglycosylation and dehydration rates of the bioactive components in American ginseng leaves. As the temperature was increased, the amounts of common ginsenosides decreased while those of rare ginsenosides increased. After FIR heat treatment of American ginseng leaves at an optimal 190 °C, the highest total polyphenolic content and kaempferol content were detected, the antioxidant activity was significantly enhanced, and the amounts of the rare ginsenosides F4, Rg6, Rh4, Rk3, Rk1, Rg3, and Rg5 were 41, 5, 37, 64, 222, 17, and 266 times higher than those in untreated leaves, respectively. Moreover, the radical scavenging rates for 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) and the reducing power of the treated leaf extracts were 2.17, 1.86, and 1.77 times higher, respectively. Hence, FIR heat treatment at 190 °C is an efficient method for producing beneficial bioactive components from American ginseng leaves.

Epidemiological study of pediatric rheumatic heart disease: An analysis from the Global Burden of Disease Study 2019.

BACKGROUND: Rheumatic heart disease (RHD) is the most common acquired heart disease among children in developing countries. However, there is a lack of systematic studies on the epidemiology of pediatric RHD. This study aimed to report the burden of pediatric RHD at global, regional, and national levels between 1990 and 2019, which may provide some reference for policymakers. METHODS: The numbers and age-standardized rates (ASRs) of incidence, prevalence, mortality, and disability-adjusted life years (DALYs) for childhood RHD from 1990 to 2019 were analyzed based on data obtained from the Global Burden of Disease Study 2019 (GBD 2019). In addition, Joinpoint regression analysis was used to assess temporal trends in the burden of childhood RHD. RESULTS: Globally, the number of incidence and prevalence cases of RHD in children increased by 41.89% and 40.88%, respectively, from 1990 to 2019. Age-standardized incidence rate (ASIR) and age-standardized prevalence rate (ASPR) increased with an average annual percentage change (AAPC) of 0.75% and 0.66%, respectively. In contrast, the age-standardized DALY rate and age-standardized mortality rate (ASMR) decreased significantly since 1990 by an AAPC of -3.47% and - 2.65%, respectively. Girls had a significantly higher burden of RHD than boys during the study period. At the age level, the RHD burden was significantly highest in the age group of 10-14 years. Moreover, the ASRs of incidence, prevalence, mortality, and DALYs were negatively associated with sociodemographic index (SDI). Nationally, Fiji had the most significant increase in incidence and prevalence, and Philippines had the most remarkable rise in DALYs and mortality rates. CONCLUSION: From 1990 to 2019, although the incidence and prevalence of childhood RHD increased globally, DALYs and mortality rates markedly reduced. Countries with lower levels of sociodemographic development shoulder a higher burden of childhood RHD. Children aged 10-14 years are critical populations for whom targeted measures are needed to reduce the RHD burden, while attention to girls cannot be neglected.

Combined toxicity of polyvinyl chloride microplastics and copper to marine jacopever (Sebastes schlegelii).

Marine organisms commonly encounter co-stress resulting from the coexistence of microplastics (MPs) and heavy metals pollution in marine environments. Nevertheless, the combined effects and toxicity mechanisms of MPs and heavy metals on marine organisms remain unclear. This study integrated growth, physiological, morphological, and biochemical markers to assess the individual and combined toxicity of polyvinyl chloride MPs (PVC MPs, 1 × 104 particles/L) and copper (Cu, 200 µg/L) on marine jacopever (Sebastes schlegelii). The results revealed that co-exposure to MPs and Cu had a more detrimental impact on jacopever compared to the single-exposure groups, as evidenced by the enhanced growth inhibition, respiratory stress, and hepatotoxicity. This phenomenon may be attributed to PVC MPs accelerating the accumulation of Cu in jacopever liver. Therefore, peroxidation damage occurred in the co-exposed liver and may result in liver dysfunction. These findings contribute valuable insights into the risks associated with the coexistence of MPs and heavy metal pollution in marine ecosystems.

Bioaccumulation of polycyclic aromatic hydrocarbons and their human health risks depend on the characteristics of microplastics in marine organisms of Sanggou Bay, China.

Microplastics pose a threat to marine environments through their physical presence and as vectors of chemical pollutants. However, the impact of microplastics on the accumulation and human health risk of chemical pollutants in marine organisms remains largely unknown. In this study, we investigated the microplastics and polycyclic aromatic hydrocarbons (PAHs) pollution in marine organisms from Sanggou Bay and analyzed their correlations. Results showed that microplastic and PAHs concentration ranged from 1.23 ± 0.23 to 5.77 ± 1.10 items/g, from 6.98 ± 0.45 to 15.07 ± 1.25 µg/kg, respectively. The microplastic abundance, particularly of fibers, transparent and color plastic debris, correlates strongly with PAH contents, indicating that microplastics increase the bioaccumulation of PAHs and microplastics with these characteristics have a significant vector effect on PAHs. Although consuming seafood from Sanggou Bay induce no carcinogenic risk from PAHs, the presence of microplastics in organisms can significantly increases incremental lifetime cancer risk of PAHs. Thus, microplastics can serve as transport vectors for PAHs with implications for the potential health risks to human through consumption. This study provides new insight into the risks of microplastics in marine environments.

Comprehensive analysis of diagnosis and treatment in 99 cases of abdominal Schwannoma.

PURPOSE: Schwannoma is a rare mesenchymal tumor. In this study, we analyzed clinicopathologically 99 schwannomas.This retrospective study delves into the clinical, pathological, and immunohistochemical dimensions of abdominal schwannomas. RESULTS: A cohort of 99 cases, comprising 4 malignant and 95 benign schwannomas, was meticulously examined. Clinical analysis revealed a notable gender distribution (1:1.7, male to female) and an average age of 58.5 years. The majority of cases were asymptomatic. A cohort of 99 cases, comprising 4 malignant and 95 benign schwannomas, was meticulously examined. Clinical analysis revealed a notable gender distribution (1:1.7, male to female) and an average age of 58.5 years. The majority of cases were asymptomatic. Tumor sizes ranged from 0.5 to 30 cm, with distinct locations in the stomach for most benign cases and the abdomen/small intestine for malignancies. Initial misdiagnoses were frequent. Pathological evaluations revealed distinct features, including Antoni A and B patterns, spindle cells, and lymphatic sheath structures in benign schwannomas. Malignant cases exhibited atypical cells, ulcers, and invasive growth. Immunohistochemical markers, such as S100, SOX10, and vimentin, consistently demonstrated positivity by contributing to accurate diagnoses. Treatment outcomes indicated a poor prognosis in malignant cases, with overall survival ranging from 10 to 41 months. Conversely, benign cases displayed no recurrence or metastasis during follow-up, despite atypical behaviors. CONCLUSION: This study underscores the rarity of abdominal schwannomas and underscores the need for a comprehensive diagnostic morphology and immunohistochemistry. SOX10 emerges as a crucial and specific marker for accurate diagnosis. Further research is imperative to refine diagnostic protocols and enhance our understanding of the clinical behavior of abdominal schwannomas.

Expression and pathogenesis of insulin-like growth factor-1 and insulin-like growth factor binding protein 3 in a mouse model of ulcerative colitis.

Background and aim: Insulin-like growth factor-1 may be involved in the epithelial-to-mesenchymal transition process. It can mitigate adverse effects when interacting with insulin-like growth factor binding protein 3. This study aimed to explore alterations in the expression of these two factors in the colonic tissue of mice with ulcerative colitis. Method: This study utilized animal models. Mice were randomly allocated into three distinct groups. Disease activity index assessment was performed first, followed by histological grading of colitis. Protein and mRNA expression levels were determined using Western blotting and RT-qPCR. Immunohistochemical detection was used to determine histochemistry scores. Pearson correlation and SPSS 25.0 software were used for data analysis. Results: The findings indicated a reduction in the expression of the two investigated factors as well as in epithelial-to-mesenchymal transition epithelial markers during inflammation, while the expression of noninflammatory factors increased. These effects were notably amplified following treatment. Interestingly, the changes in epithelial-to-mesenchymal transition-inducing factors and mesenchymal markers contradicted this trend. Pearson correlation analysis revealed a correlation between molecular indicators of change and epithelial-to-mesenchymal transition. Conclusion: Insulin-like growth factor-1 and insulin-like growth factor binding protein 3 may play a protective role in the development and progression of ulcerative colitis, potentially through their inhibition of the epithelial-to-mesenchymal transition. These factors hold promise as targets for the clinical diagnosis and treatment of ulcerative colitis.

In-situ forming ultra-mechanically sensitive materials for high-sensitivity stretchable fiber strain sensors.

Fiber electronics with flexible and weavable features can be easily integrated into textiles for wearable applications. However, due to small sizes and curved surfaces of fiber materials, it remains challenging to load robust active layers, thus hindering production of high-sensitivity fiber strain sensors. Herein, functional sensing materials are firmly anchored on the fiber surface in-situ through a hydrolytic condensation process. The anchoring sensing layer with robust interfacial adhesion is ultra-mechanically sensitive, which significantly improves the sensitivity of strain sensors due to the easy generation of microcracks during stretching. The resulting stretchable fiber sensors simultaneously possess an ultra-low strain detection limit of 0.05%, a high stretchability of 100%, and a high gauge factor of 433.6, giving 254-folds enhancement in sensitivity. Additionally, these fiber sensors are soft and lightweight, enabling them to be attached onto skin or woven into clothes for recording physiological signals, e.g. pulse wave velocity has been effectively obtained by them. As a demonstration, a fiber sensor-based wearable smart healthcare system is designed to monitor and transmit health status for timely intervention. This work presents an effective strategy for developing high-performance fiber strain sensors as well as other stretchable electronic devices.

High-performing fiber electrodes based on a gold-shelled silver nanowire framework for bioelectronics.

Flexible fiber electrodes offer new opportunities for bioelectronics and are reliable in vivo applications, high flexibility, high electrical conductivity, and satisfactory biocompatibility are typically required. Herein, we present an all-metal flexible and biocompatible fiber electrode based on a metal nanowire hybrid strategy, i.e., silver nanowires were assembled on a freestanding framework, and further to render them inert, they were plated with a gold nanoshell. Our fiber electrodes exhibited a low modulus of ∼75 MPa and electrical conductivity up to ∼4.8 × 106 S m-1. They can resist chemical erosion with negligible leakage of biotoxic silver ions in the physiological environment, thus ensuring satisfactory biocompatibility. Finally, we demonstrated the hybrid fiber as a neural electrode that stimulated the sciatic nerve of a mouse, proving its potential for applications in bioelectronics.

A Fiber Sensor for Long-Term Monitoring of Extracellular Potassium Ion Fluctuations in Chronic Neuropsychiatric Diseases.

The extracellular potassium ion concentration in the brain exerts a significant influence on cellular excitability and intercellular communication. Perturbations in the extracellular potassium ion level are closely correlated with various chronic neuropsychiatric disorders including depression. However, a critical gap persists in performing real-time and long-term monitoring of extracellular potassium ions, which is necessary for comprehensive profiling of chronic neuropsychiatric diseases. Here, a fiber potassium ion sensor (FKS) that consists of a soft conductive fiber with a rough surface and a hydrophobic-treated transduction layer interfaced with a potassium ion-selective membrane is found to solve this problem. The FKS demonstrates stable interfaces between its distinct functional layers in an aqueous environment, conferring an exceptional stability of 6 months in vivo, in stark contrast to previous reports with working durations from hours to days. Upon implantation into the mouse brain, the FKS enables effective monitoring of extracellular potassium ion dynamics under diverse physiological states including anesthesia, forced swimming, and tail suspension. Using this FKS, tracking of extracellular potassium ion fluctuations that align with behaviors associated with the progression of depression over months is achieved, demonstrating its usability in studying chronic neuropsychiatric disorders from a new biochemical perspective.

A Biodegradable Fiber Calcium Ion Sensor by Covalently Bonding Ionophores on Bioinert Nanoparticles.

Implantable sensors, especially ion sensors, facilitate the progress of scientific research and personalized healthcare. However, the permanent retention of implants induces health risks after sensors fulfill their mission of chronic sensing. Biodegradation is highly anticipated; while; biodegradable chemical sensors are rare due to concerns about the leakage of harmful active molecules after degradation, such as ionophores. Here, a novel biodegradable fiber calcium ion sensor is introduced, wherein ionophores are covalently bonded with bioinert nanoparticles to replace the classical ion-selective membrane. The fiber sensor demonstrates comparable sensing performance to classical ion sensors and good flexibility. It can monitor the fluctuations of Ca2+ in a 4-day lifespan in vivo and biodegrade in 4 weeks. Benefiting from the stable bonding between ionophores and nanoparticles, the biodegradable sensor exhibits a good biocompatibility after degradation. Moreover, this approach of bonding active molecules on bioinert nanoparticles can serve as an effective methodology for minimizing health concerns about biodegradable chemical sensors.

Development and Validation of Knowledge Assessment Scales for Dementia and Urinary Incontinence in Community Older People.

To develop and validate scales for reliably assessing dementia and urinary incontinence knowledge of older adults in the community. Items were generated through a literature review, refined through a Delphi study (n = 19), and then revised through a pilot study (n = 29). Item analysis and exploratory factor analysis were applied to finalize the scales (n = 244). Construct validity, reliability, and acceptability were evaluated (n = 243). The two knowledge assessment scales for dementia and urinary incontinence, respectively, comprised 12 items and 8 items. Model fit indicators of both met the criteria of confirmatory factor analysis. Cronbach's α were .82 and .70, respectively. Completion ratio and completion time of the two scales was 83.51% and 4.22 ± 1.90 minutes. The knowledge assessment scales for dementia and urinary incontinence with satisfactory validity, reliability, and acceptability, could be served as valid tools for disease prevention and management among older adults in the community.