Development of an Improved Standard Reference Material for Vitamin D Metabolites in Human Serum.

The National Institute of Standards and Technology (NIST) has developed Standard Reference Material (SRM) 972a Vitamin D Metabolites in Frozen Human Serum as a replacement for SRM 972, which is no longer available. SRM 972a was developed in collaboration with the National Institutes of Health's Office of Dietary Supplements. In contrast to the previous reference material, three of the four levels of SRM 972a are composed of unmodified human serum. This SRM has certified and reference values for the following 25-hydroxyvitamin D [25(OH)D] species: 25(OH)D2, 25(OH)D3, and 3-epi-25(OH)D3. The value assignment and certification process included three isotope-dilution mass spectrometry approaches, with measurements performed at NIST and at the Centers for Disease Control and Prevention (CDC). The value assignment methods employed have been modified from those utilized for the previous SRM, and all three approaches now incorporate chromatographic resolution of the stereoisomers, 25(OH)D3 and 3-epi-25(OH)D3.

Candidate Reference Measurement Procedure for the Determination of (24R),25-Dihydroxyvitamin D3 in Human Serum Using Isotope-Dilution Liquid Chromatography-Tandem Mass Spectrometry.

The two major forms of vitamin D, vitamin D3 and vitamin D2, are metabolized in the liver through hydroxylation to 25-hydroxyvitamin D species, and then further hydroxylated in the kidney to various dihydroxyvitamin D species. (24R),25-Dihydroxyvitamin D3 ((24R),25(OH)2D3) is a major catabolite of 25-hydroxyvitamin D metabolism and is an important vitamin D metabolite used as a catabolism marker and indicator of kidney disease. The National Institute of Standards and Technology has recently developed a reference measurement procedure for the determination of (24R),25(OH)2D3 in human serum using isotope-dilution LC-MS/MS. The (24R),25(OH)2D3 and added deuterated labeled internal standard (24R),25(OH)2D3-d6 were extracted from serum matrix using liquid-liquid extraction prior to LC-MS/MS analysis. Chromatographic separation was performed using a fused-core C18 column. Atmospheric pressure chemical ionization in the positive ion mode and multiple reaction monitoring were used for LC-MS/MS. The accuracy of the measurement of (24R),25(OH)2D3 was evaluated by recovery studies of measuring (24R),25(OH)2D3 in gravimetrically prepared spiked samples of human serum with known (24R),25(OH)2D3 levels. The recoveries of the added (24R),25(OH)2D3 averaged 99.0% (0.8% SD), and the extraction efficiencies averaged 95% (2% SD). Excellent repeatability was demonstrated with CVs of ∼1%. The limit of quantitation at a signal-to-noise ratio of ∼10 was 0.2 ng/g. Potential isomeric interferences from other endogenous species and from impurity components of the reference standard were investigated. LC baseline resolution of (24R),25(OH)2D3 from these isomers was achieved within 35 min. This method was used for value assignment of (24R),25(OH)2D3 in Standard Reference Materials of Vitamin D Metabolites in Human Serum, which can serve as an accuracy base for routine methods used in clinical laboratories.

Development of a Standard Reference Material for metabolomics research.

The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health (NIH), has developed a Standard Reference Material (SRM) to support technology development in metabolomics research. SRM 1950 Metabolites in Human Plasma is intended to have metabolite concentrations that are representative of those found in adult human plasma. The plasma used in the preparation of SRM 1950 was collected from both male and female donors, and donor ethnicity targets were selected based upon the ethnic makeup of the U.S. population. Metabolomics research is diverse in terms of both instrumentation and scientific goals. This SRM was designed to apply broadly to the field, not toward specific applications. Therefore, concentrations of approximately 100 analytes, including amino acids, fatty acids, trace elements, vitamins, hormones, selenoproteins, clinical markers, and perfluorinated compounds (PFCs), were determined. Value assignment measurements were performed by NIST and the Centers for Disease Control and Prevention (CDC). SRM 1950 is the first reference material developed specifically for metabolomics research.

Isotope-dilution liquid chromatography-tandem mass spectrometry candidate reference method for total testosterone in human serum.

BACKGROUND: We developed and evaluated a candidate reference measurement procedure (RMP) to standardize testosterone measurements, provide highly accurate and precise value assignments for the CDC Hormone Standardization Program, and ensure accurate and comparable results across testing systems and laboratories. METHODS: After 2 liquid/liquid extractions of serum with a combination of ethyl acetate and hexane, we quantified testosterone by isotope-dilution liquid chromatography-tandem mass spectrometry with electrospray ionization in the positive ion mode monitoring 289→97 m/z (testosterone) and 292→112 m/z ((3)C(13) testosterone). We used calibrator bracketing and gravimetric measurements to give higher specificity and accuracy to serum value assignments. The candidate RMP was evaluated for accuracy by use of NIST-certified reference material SRM971 and validated by split-sample comparison to established RMPs. We evaluated intraassay and interassay imprecision, measurement uncertainty, potential interferences, and matrix effects. RESULTS: A weighted Deming regression comparison of the candidate RMP to established RMPs showed agreement with no statistical difference (slope 0.99, 95% CI 0.98-1.00, intercept 0.54, 95% CI -1.24 to 2.32) and a bias of ≤0.3% for NIST SRM971. The candidate RMP gave maximum intraassay, interassay, and total percent CVs of 1.5%, 1.4%, and 1.7% across the concentrations of testosterone typically found in healthy men and women. We tested structural analogs of testosterone and 125 serum samples and found no interferences with the measurement. CONCLUSIONS: This RMP for testosterone can serve as a higher-order standard for measurement traceability and can be used to provide an accuracy base to which routine methods can be compared in the CDC Hormone Standardization Program.

Determination of 24,25-dihydroxyvitamin D3 in Vitamin D External Quality Assessment Scheme samples using a reference measurement procedure.

Ninety archived human serum samples from the Vitamin D External Quality Assessment Scheme (DEQAS) were analyzed using a reference measurement procedure (RMP) based on isotope dilution liquid chromatography - tandem mass spectrometry (ID LC-MS/MS) for the determination of 24,25-dihydroxyvitamin D3 [24,25(OH)2D3]. These 24,25(OH)2D3 results, in conjunction with concentration values assigned using RMPs for 25-hydroxyvitamin D2 [25(OH)D2] and 25-hydroxyvitamin D3 [25(OH)D3], provide a valuable resource for assessing the accuracy of measurements for 24,25(OH)2D3 and for investigating the relationship between 24,25(OH)2D3 and 25(OH)D3. Results for 24,25(OH)2D3 using the RMP were compared to DEQAS consensus values demonstrating that the consensus values were not sufficient to assess the accuracy of measurements among different laboratories and methods. A multivariable regression analysis approach using historical DEQAS consensus values for various total 25(OH)D assays was used to assess the contribution of 24,25(OH)2D3 concentration on the assay response. The response of several ligand binding assays for total 25(OH)D was shown to be impacted by the presence of 24,25(OH)2D3.

Development and certification of a standard reference material for vitamin D metabolites in human serum.

The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health's Office of Dietary Supplements (NIH-ODS), has developed a Standard Reference Material (SRM) for the determination of 25-hydroxyvitamin D [25(OH)D] in serum. SRM 972 Vitamin D in Human Serum consists of four serum pools with different levels of vitamin D metabolites and has certified and reference values for 25(OH)D(2), 25(OH)D(3), and 3-epi-25(OH)D(3). Value assignment of this SRM was accomplished using a combination of three isotope-dilution mass spectrometry approaches, with measurements performed at NIST and at the Centers for Disease Control and Prevention (CDC). Chromatographic resolution of the 3-epimer of 25(OH)D(3) proved to be essential for accurate determination of the metabolites.

Preparation and value assignment of standard reference material 968e fat-soluble vitamins, carotenoids, and cholesterol in human serum.

Standard Reference Material 968e Fat-Soluble Vitamins, Carotenoids, and Cholesterol in Human Serum provides certified values for total retinol, γ- and α-tocopherol, total lutein, total zeaxanthin, total ß-cryptoxanthin, total ß-carotene, 25-hydroxyvitamin D(3), and cholesterol. Reference and information values are also reported for nine additional compounds including total α-cryptoxanthin, trans- and total lycopene, total α-carotene, trans-ß-carotene, and coenzyme Q(10). The certified values for the fat-soluble vitamins and carotenoids in SRM 968e were based on the agreement of results from the means of two liquid chromatographic methods used at the National Institute of Standards and Technology (NIST) and from the median of results of an interlaboratory comparison exercise among institutions that participate in the NIST Micronutrients Measurement Quality Assurance Program. The assigned values for cholesterol and 25-hydroxyvitamin D(3) in the SRM are the means of results obtained using the NIST reference method based upon gas chromatography-isotope dilution mass spectrometry and liquid chromatography-isotope dilution tandem mass spectrometry, respectively. SRM 968e is currently one of two available health-related NIST reference materials with concentration values assigned for selected fat-soluble vitamins, carotenoids, and cholesterol in human serum matrix. This SRM is used extensively by laboratories worldwide primarily to validate methods for determining these analytes in human serum and plasma and for assigning values to in-house control materials. The value assignment of the analytes in this SRM will help support measurement accuracy and traceability for laboratories performing health-related measurements in the clinical and nutritional communities.

Development and validation of a reference measurement procedure for certification of phenytoin, phenobarbital, lamotrigine, and topiramate in human serum using isotope-dilution liquid chromatography/tandem mass spectrometry.

Phenytoin (PHT), phenobarbital (PHB), lamotrigine (LTG), and topiramate (TPM) are some of the most widely used antiepileptic drugs (AEDs). Monitoring of their concentrations in serum is important for the treatment of epilepsy. A reference measurement procedure (RMP) for certification of PHT, PHB, LTG, and TPM in serum has been developed and critically evaluated. Isotopically labeled compounds of PHT, PHB, LTG, and TPM are used as internal standards for the four AEDs. The four drugs and their respective labeled internal standards are simultaneously extracted from serum using solid-phase extraction prior to reversed-phase liquid chromatography-tandem mass spectrometry (LC-MS/MS). Chromatographic separation was performed using a C(18) column. Electrospray ionization (ESI) in the positive ion mode for PHT and LTG, and in the negative ion mode for PHB and TPM were used. The recovery of AEDs added to serum (accuracy of the extraction method) was evaluated by recovery studies of measuring the four drugs in spiked samples with known drug levels. The recoveries of the added drugs ranged from 98.6% to 102.0%. The absolute recoveries (extraction efficiencies) of the four drugs with this method ranged from 97% to 100%. Excellent repeatability was obtained for the four drugs with between-set coefficients of variation (CVs) within 1%. The type B components estimates are conservatively large and are considerably larger than the type A component. Therefore, we use the usual metrological expansion factor of 2 to provide an approximate 95% coverage interval. The relative expanded uncertainties for the four AEDs ranged from 2.3% to 2.4%. This LC-MS/MS RMP for PHT, PHB, LTG, and TPM in serum demonstrating good accuracy and precision can be used to assess the accuracy of routine methods used in clinical laboratories.

Development of a candidate reference measurement procedure for the determination of 25-hydroxyvitamin D3 and 25-hydroxyvitamin D2 in human serum using isotope-dilution liquid chromatography-tandem mass spectrometry.

Vitamin D exists in two major forms, vitamin D(3) and vitamin D(2). Vitamin D helps the body absorb calcium and promote optimal bone health. Both forms of vitamin D are metabolized to 25-hydroxyvitamin D in the body, and the levels of 25-hydroxyvitamin D(3) [25(OH)D(3)] and 25-hydroxyvitamin D(2) [25(OH)D(2)] in serum are considered the best indicators of vitamin D status. A candidate reference measurement procedure for serum 25(OH)D(3) and 25(OH)D(2) has been developed and critically evaluated. The deuterated compounds 25(OH)D(3)-d(3) and 25(OH)D(2)-d(3) are used as internal standards for 25(OH)D(3) and 25(OH)D(2), respectively. The 25(OH)D(3) and 25(OH)D(2) and their respective labeled internal standards are simultaneously extracted from serum using liquid-liquid extraction prior to reversed-phase liquid chromatography-tandem mass spectrometry (LC-MS/MS). Chromatographic separation was performed using a cyano (CN) column for both 25(OH)D(3) and 25(OH)D(2). Atmospheric pressure chemical ionization (APCI) in the positive ion mode and multiple reaction monitoring (MRM) were used for LC-MS/MS. The accuracy of the method was evaluated by recovery studies of measuring 25-hydroxyvitamin D [25(OH)D] in spiked samples with known 25(OH)D levels. The recoveries of the added 25(OH)D(3) and 25(OH)D(2) ranged from 99.0% to 101.0%. The absolute recoveries with this method were 97% and 92% for 25(OH)D(3) and 25(OH)D(2), respectively. Excellent precision was obtained with between-set coefficients of variation (CVs) of 0.2-0.6% for 25(OH)D levels >1 ng/g and within 2% for the level of <1 ng/g. Chromatographic separation of 25(OH)D(3) and 25(OH)D(2) from their respective isomers 3-epi-25(OH)D(3) and 3-epi-25(OH)D(2) was achieved. The limit of detection at a signal-to-noise ratio of approximately 3 was 40 pg of 25(OH)D on column (or approximately 0.15 ng/g as expressed as a concentration). This candidate reference measurement procedure for serum 25(OH)D(3) and 25(OH)D(2) demonstrates good accuracy and precision and low susceptibility to interferences. It can be used to provide an accuracy base to which clinical methods for 25(OH)D(3) and 25(OH)D(2) can be compared and that will serve as a standard of higher order for measurement traceability.

Certification of drugs of abuse in a human serum standard reference material: SRM 1959.

A new standard reference material (SRM) for drugs of abuse in human serum (SRM 1959) has been developed. This SRM is intended to be used as a control material for laboratories performing analysis of drugs of abuse in blood to evaluate the accuracy of their methods. SRM 1959 is a frozen human serum material fortified with seven compounds for which analyses are performed to determine evidence of illegal drug use: benzoylecgonine (BZE), methadone (METH), methamphetamine (MAMP), morphine (MOR), nordiazepam (NOR), phencyclidine (PCP), and 11-nor-Delta(9)-tetrahydrocannabinol-9-carboxylic acid (THC-9-COOH). Two independent methods involving isotope dilution (ID)-gas chromatography/mass spectrometry (GC/MS) and ID-liquid chromatography/mass spectrometry (LC/MS) were used for the value assignment. For THC-9-COOH, an additional measurement using LC/tandem mass spectrometry (LC/MS/MS) was also included. All methods used isotopically labeled compounds as internal standards and solid-phase extractions to isolate the analytes from the serum. The GC/MS methods used different clean-up procedures from those used for the LC/MS-based methods. Repeatability with within-set coefficients of variation (CVs) ranged from 0.5% to 4.3% for the GC/MS methods and from 0.2% to 1.2% for the LC/MS-based methods. Intermediate precision with between-set CVs for all the methods ranged from 0.1% to 1.1%. Agreement between the GC/MS and LC/MS methods ranged from 0.8% to 8.8%. The results from the methods were combined to obtain the certified concentrations and their expanded uncertainties.

Interlaboratory comparison study of serum total testosterone [corrected] measurements performed by mass spectrometry methods.

BACKGROUND: Though mass spectrometry (MS) assays are increasingly used for routine clinical measurements of serum total testosterone (TT), information about the variability of results is limited. This study assessed the variability of TT measurement results from routine MS assays. METHODS: Twenty serum samples (12 females, 8 males) were analyzed on 2 days by seven high performance liquid chromatography (HPLC), and one gas chromatography (GC)-tandem mass spectrometry (HPLC-MS/MS, GC-MS/MS) assays. Two samples (male and female) were provided in five replicates to assess the within-run variability. Results were compared against those obtained at National Institute of Standards and Technology (NIST). The within- and between-laboratory variability was assessed for each sample. Comparisons to the NIST results were performed using bias plot and Deming regression analysis. RESULTS: The overall coefficient of variation of the results obtained with MS assays was <15%CV at >1.53 nmol/L and <34%CV at 0.3 nmol/L. The between-assay variability was the major contributor to the overall variability. The assay precision was the highest (<3%CV) with assays using liquid-liquid extraction for sample preparation or GC-MS/MS. The mean percent difference to the reference assay was 11%. The slopes of Deming regression analysis of the MS assays were between 0.903 and 1.138 (correlation coefficient: >0.996). TT concentrations for one assay were above the measurement range. CONCLUSIONS: The variability of TT measurement results among MS assays is substantially smaller than that reported for immunoassays. The type of sample preparation may affect assay precision. Standardizing assays can further reduce the variability of measurement results.

The association of CYP2C9 gene polymorphisms with colorectal carcinoma in Han Chinese.

BACKGROUND: Cytochrome P450 (CYP) 2C9 is an important enzyme involved in xenobiotics metabolism. This study investigated the association of CYP2C9 gene coding region polymorphisms with colorectal cancer (CRC) in Chinese Han population. METHODS: Four hundred and eighty-three healthy controls and 286 sporadic CRC patients participated in this study. Direct sequencing was used to identify the sequence polymorphisms. RESULTS: We detected the significant association of 2 coding region SNPs, rs1057910 and rs1057911, of CYP2C9 with the risk of developing sporadic CRC for Han Chinese. These 2 SNPs showed a strong linkage disequilibrium (LD) (r(2)=0.97, D'=0.985). Significantly different minor allele frequencies were found for SNPs rs1057910 and rs1057911 between the cases (7% and 7.2%, respectively) and controls (3% and 2.9%, respectively) with adjusted P=0.0004 and 0.0002, respectively. Individuals heterozygous for rs1057910A/C or rs1057911A/T showed 2.589-fold (95% CI: 1.549-4.330) or 2.770-fold (95% CI 1.653-4.643) increased risk of developing sporadic CRC. We did not detect any homozygote minor allele carrier for either rs1057910 or rs1057911 in our study population. The CRC association appeared to be more evident for individuals over age 50 y, for men, and for rectum cancer site. CONCLUSION: There is an association of CYP2C9 coding region polymorphisms with the risk of developing CRC in Han Chinese after genotyping cases and controls recruited from different locations in China.

Development of Standard Reference Material (SRM) 2973 Vitamin D Metabolites in Frozen Human Serum (High Level).

The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health Office of Dietary Supplements and the Vitamin D Standardization Program, has recently issued a new serum-matrix Standard Reference Material (SRM): 2973 Vitamin D Metabolites in Frozen Human Serum (High Level). SRM 2973 was designed to provide a serum material with a total 25-hydroxyvitamin D [25(OH)D] concentration near 100 nmol/L to complement the existing serum-based SRMs with values assigned for total 25(OH)D between 20 and 80 nmol/L. Values were assigned for 25-hydroxyvitamin D2 [25(OH)D2], 25-hydroxyvitamin D3 [25(OH)D3], 3-epi-25(OH)D3, and total 25(OH)D [the sum of 25(OH)D2 + 25(OH)D3] using the NIST isotope dilution LC with tandem MS (MS/MS) reference measurement procedure (RMP) and related methods. SRM 2973 has a certified value of 98.4 ± 2.1 nmol/L for 25(OH)D3 and reference values of 1.59 ± 0.05 nmol/L for 25(OH)D2 and 5.23 ± 0.20 nmol/L for 3-epi-25(OH)D3. In addition, a candidate RMP for 24R,25-dihydroxyvitamin D3 [24R,25(OH)2D3] based on LC-MS/MS was used to assign values to SRM 2973 and the existing SRM 972a Vitamin D Metabolites in Frozen Human Serum. Reference values for 24R,25(OH)2D3 were assigned to SRM 2973 (7.51 ± 0.26 nmol/L) and the four levels of SRM 972a: Level 1 (6.38 ± 0.23 nmol/L), Level 2 (3.39 ± 0.12 nmol/L), Level 3 (3.88 ± 0.013 nmol/L), and Level 4 (6.32 ± 0.22 nmol/L). The development of SRM 2973 [with a higher concentration of 25(OH)D3] and the addition of values for 24R,25(OH)2D3 assigned to both SRM 972a and SRM 2973 provide laboratories involved in vitamin D measurements with improved QA tools.

Value Assignment of Vitamin D Metabolites in Vitamin D Standardization Program Serum Samples.

Assay variability has been cited as an obstacle to establishing optimal vitamin D exposure. As part of the Vitamin D Standardization Program (VDSP) effort to standardize the measurement of total 25-hydroxyvitamin D [25(OH)D], the value assignment of total 25(OH)D in 50 single-donor serum samples was performed using two isotope-dilution LC with tandem MS methods. Both methods are recognized as reference measurement procedures (RMPs) by the Joint Committee for Traceability in Laboratory Medicine. These samples and their assigned values serve as the foundation for several aspects of the VDSP. To our knowledge, this is the first time that two RMPs have been used to assign 25(OH)D values to such a large number of serum samples.

Role of the National Institute of Standards and Technology (NIST) in Support of the Vitamin D Initiative of the National Institutes of Health, Office of Dietary Supplements.

Since 2005, the National Institute of Standards and Technology (NIST) has collaborated with the National Institutes of Health (NIH), Office of Dietary Supplements (ODS) to improve the quality of measurements related to human nutritional markers of vitamin D status. In support of the NIH-ODS Vitamin D Initiative, including the Vitamin D Standardization Program (VDSP), NIST efforts have focused on (1) development of validated analytical methods, including reference measurement procedures (RMPs); (2) development of Standard Reference Materials (SRMs); (3) value assignment of critical study samples using NIST RMPs; and (4) development and coordination of laboratory measurement QA programs. As a result of this collaboration, NIST has developed RMPs for 25-hydroxyvitamin D2 [25(OH)D2], 25(OH)D3, and 24R,25-dihydroxyvitamin D3 [24R,25(OH)2D3]; disseminated serum-based SRMs with values assigned for 25(OH)D2, 25(OH)D3, 3-epi-25(OH)D3, and 24R,25(OH)2D3; assigned values for critical samples for VDSP studies, including an extensive interlaboratory comparison and reference material commutability study; provided an accuracy basis for the Vitamin D External Quality Assurance Scheme; coordinated the first accuracy-based measurement QA program for the determination of 25(OH)D2, 25(OH)D3, and 3-epi-25(OH)D3 in human serum/plasma; and developed methods and SRMs for the determination of vitamin D and 25(OH)D in food and supplement matrix SRMs. The details of these activities and their benefit and impact to the NIH-ODS Vitamin D Initiative are described.

Interlaboratory Comparison for the Determination of 24,25-Dihydroxyvitamin D3 in Human Serum Using Liquid Chromatography with Tandem Mass Spectrometry.

Six laboratories associated with the Vitamin D Standardization Program (VDSP) participated in an interlaboratory comparison of LC with tandem MS (MS/MS) methods for the determination of 24,25-dihydroxyvitamin D3 [24,25(OH)2D3] in human serum. The laboratories analyzed two different serum-based Standard Reference Materials (SRMs) intended for use in the determination of 25-hydroxyvitamin D and 30 samples from the Vitamin D External Quality Assessment Scheme (DEQAS). All laboratory methods for 24,25(OH)2D3 were based on isotope dilution LC-MS/MS; three of the methods used derivatization of the vitamin D metabolites before LC-MS/MS. Laboratory results were compared to the National Institute of Standards and Technology (NIST) results, which were obtained using their newly developed candidate reference measurement procedure for 24,25(OH)2D3. Laboratory results for the SRM samples varied in comparability to the NIST results, with one laboratory in excellent agreement (-1.6% mean bias), three laboratories at 10-15% mean bias, and the remaining laboratory at 36% mean bias. For the 30 DEQAS samples, the mean bias for the five laboratories ranged from 6 to 15%; however, the SD of the bias ranged from 8 to 29%. As a result of this intercomparison study, one laboratory discovered and corrected a method calculation error and another laboratory modified and improved their LC-MS/MS method.

Baseline Assessment of 25-Hydroxyvitamin D Assay Performance: A Vitamin D Standardization Program (VDSP) Interlaboratory Comparison Study.

The Vitamin D Standardization Program (VDSP) coordinated an interlaboratory study to assess the comparability of measurements of total 25-hydroxyvitamin D [25(OH)D] in human serum, which is the primary marker of vitamin D status. A set of 50 individual donor samples were analyzed by 15 different laboratories representing national nutrition surveys, assay manufacturers, and clinical and/or research laboratories to provide results for total 25(OH)D using both immunoassays (IAs) and LC tandem MS (MS/MS). The results were evaluated relative to bias compared with the target values assigned based on a combination of measurements at Ghent University (Belgium) and the U.S. National Institute of Standards and Technology using reference measurement procedures for the determination of 25(OH)D2 and 25(OH)D3. CV and mean bias for each laboratory and assay platform were assessed and compared with previously established VDSP performance criteria, namely CV ≤ 10% and mean bias ≤ 5%. Nearly all LC-MS/MS results achieved VDSP criteria, whereas only 50% of IAs met the criterion for a ≤10% CV and only three of eight IAs achieved the ≤5% bias. These results establish a benchmark for the evaluation of 25(OH)D assay performance and standardization activities in the future.

Baseline Assessment of 25-Hydroxyvitamin D Reference Material and Proficiency Testing/External Quality Assurance Material Commutability: A Vitamin D Standardization Program Study.

The Vitamin D Standardization Program (VDSP) coordinated a study in 2012 to assess the commutability of reference materials and proficiency testing/external quality assurance materials for total 25-hydroxyvitamin D [25(OH)D] in human serum, the primary indicator of vitamin D status. A set of 50 single-donor serum samples as well as 17 reference and proficiency testing/external quality assessment materials were analyzed by participating laboratories that used either immunoassay or LC-MS methods for total 25(OH)D. The commutability test materials included National Institute of Standards and Technology Standard Reference Material 972a Vitamin D Metabolites in Human Serum as well as materials from the College of American Pathologists and the Vitamin D External Quality Assessment Scheme. Study protocols and data analysis procedures were in accordance with Clinical and Laboratory Standards Institute guidelines. The majority of the test materials were found to be commutable with the methods used in this commutability study. These results provide guidance for laboratories needing to choose appropriate reference materials and select proficiency or external quality assessment programs and will serve as a foundation for additional VDSP studies.

An assessment of 25-hydroxyvitamin D measurements in comparability studies conducted by the Vitamin D Metabolites Quality Assurance Program.

BACKGROUND: The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health Office of Dietary Supplements, established the first accuracy-based program for improving the comparability of vitamin D metabolite measurements, the Vitamin D Metabolites Quality Assurance Program. METHODS: The study samples were human serum or plasma Standard Reference Materials (SRMs) with 25-hydroxyvitamin D values that were determined at NIST. Participants evaluated the materials using immunoassay (IA), liquid chromatography (LC) with mass spectrometric detection, and LC with ultraviolet absorbance detection. NIST evaluated the results for concordance within the participant community as well as trueness relative to the NIST value. RESULTS: For the study materials that contain mostly 25-hydroxyvitamin D3 (25(OH)D3),the coefficient of variation (CV) for the participant results was consistently in the range from 7% to 19%, and the median values were biased high relative to the NIST values. However, for materials that contain significant concentrations of both 25-hydroxyvitamin D2 (25(OH)D2) and 25(OH)D3, the median IA results were biased lower than both the LC and the NIST values, and the CV was as high as 28%. The first interlaboratory comparison results for SRM 972a Vitamin D Metabolites in Human Serum are also reported. CONCLUSIONS: Relatively large within-lab and between-lab variability hinders conclusive assessments of bias and accuracy.