RESUMEN
We propose and demonstrate a high-speed directly modulated laser based on a hybrid deformed-square-FP coupled cavity (DFC), aiming for a compact-size low-cost light source in next-generation optical communication systems. The deformed square microcavity is directly connected to the FP cavity and utilized as a wavelength-sensitive reflector with a comb-like and narrow-peak reflection spectrum for selecting the lasing mode, which can greatly improve the single-mode yield of the laser and the quality (Q) factor of the coupled mode. By optimizing the device design and operating condition, the modulation bandwidth of the DFC laser can be enhanced due to the intracavity-mode photon-photon resonance effect. Our experimental results show an enhancement of 3-dB modulation bandwidth from 19.3â GHz to 30â GHz and a clear eye diagram at a modulation rate of 25 Gbps.
RESUMEN
The polarization dependence of a directional coupler (DC) based on asymmetric cross-slot waveguides is investigated. Due to structural birefringence, the coupling behaviors of the quasi-TE and quasi-TM modes in the DC vary with the waveguide geometry. A polarization-independent directional coupler (PIDC) and polarization beam splitter (PBS) are proposed by tailoring the ratio of the coupling length for quasi-TE and quasi-TM modes. The simulated results show that the coupling lengths of the designed PIDC and PBS are 8 and 28.25 µm, respectively. Both the PIDC and PBS show an insertion loss (IL) <0.7 dB on a bandwidth over 100 nm. The extinction ratios are â¼20 dB for PIDC and â¼14 dB for PBS. The fabrication-error tolerance of the practical devices is also discussed. In this study, we employ a commercial software tool for finite difference eigenmode and three-dimensional finite difference time domain methods to perform the numerical simulations.