RESUMEN
Two-dimensional materials (2DM) and their heterostructures offer tunable electrical and optical properties, primarily modifiable through electrostatic gating and twisting. Although electrostatic gating is a well-established method for manipulating 2DM, achieving real-time control over interfacial properties remains challenging in exploring 2DM physics and advanced quantum device technology1-6. Current methods, often reliant on scanning microscopes, are limited in their scope of application, lacking the accessibility and scalability of electrostatic gating at the device level. Here we introduce an on-chip platform for 2DM with in situ adjustable interfacial properties, using a microelectromechanical system (MEMS). This platform comprises compact and cost-effective devices with the ability of precise voltage-controlled manipulation of 2DM, including approaching, twisting and pressurizing actions. We demonstrate this technology by creating synthetic topological singularities, such as merons, in the nonlinear optical susceptibility of twisted hexagonal boron nitride (h-BN)7-10. A key application of this technology is the development of integrated light sources with real-time and wide-range tunable polarization. Furthermore, we predict a quantum analogue that can generate entangled photon pairs with adjustable entanglement properties. Our work extends the abilities of existing technologies in manipulating low-dimensional quantum materials and paves the way for new hybrid two- and three-dimensional devices, with promising implications in condensed-matter physics, quantum optics and related fields.
RESUMEN
Flatbands have become a cornerstone of contemporary condensed-matter physics and photonics. In electronics, flatbands entail comparable energy bandwidth and Coulomb interaction, leading to correlated phenomena such as the fractional quantum Hall effect and recently those in magic-angle systems. In photonics, they enable properties including slow light1 and lasing2. Notably, flatbands support supercollimation-diffractionless wavepacket propagation-in both systems3,4. Despite these intense parallel efforts, flatbands have never been shown to affect the core interaction between free electrons and photons. Their interaction, pivotal for free-electron lasers5, microscopy and spectroscopy6,7, and particle accelerators8,9, is, in fact, limited by a dimensionality mismatch between localized electrons and extended photons. Here we reveal theoretically that photonic flatbands can overcome this mismatch and thus remarkably boost their interaction. We design flatband resonances in a silicon-on-insulator photonic crystal slab to control and enhance the associated free-electron radiation by tuning their trajectory and velocity. We observe signatures of flatband enhancement, recording a two-order increase from the conventional diffraction-enabled Smith-Purcell radiation. The enhancement enables polarization shaping of free-electron radiation and characterization of photonic bands through electron-beam measurements. Our results support the use of flatbands as test beds for strong light-electron interaction, particularly relevant for efficient and compact free-electron light sources and accelerators.
RESUMEN
Metasurfaces and photonic crystals have revolutionized classical and quantum manipulation of light and opened the door to studying various optical singularities related to phases and polarization states. However, traditional nanophotonic devices lack reconfigurability, hindering the dynamic switching and optimization of optical singularities. This paper delves into the underexplored concept of tunable bilayer photonic crystals (BPhCs), which offer rich interlayer coupling effects. Utilizing silicon nitride-based BPhCs, we demonstrate tunable bidirectional and unidirectional polarization singularities, along with spatiotemporal phase singularities. Leveraging these tunable singularities, we achieve dynamic modulation of bound-state-in-continuum states, unidirectional guided resonances, and both longitudinal and transverse orbital angular momentum. Our work paves the way for multidimensional control over polarization and phase, inspiring new directions in ultrafast optics, optoelectronics, and quantum optics.
RESUMEN
OBJECTIVES: This study was conducted to detect the overall performance of both static and dynamic occlusion in post-orthodontic patients using quantified methods, and to ascertain the correlation between the two states of occlusion. MATERIALS AND METHODS: A total of 112 consecutive patients evaluated by ABO-OGS were included in this study. Based on the pre-treatment Angle's classification of the malocclusion, samples were divided into four groups. After removing orthodontic appliances, each patients underwent the American Board of Orthodontic objective grading system (ABO-OGS) and T-Scan evaluations. All the scores were compared within these groups. Statistical evaluation included reliability tests, multivariate ANOVA, and correlation analyses (p < 0.05 was considered significant). RESULTS: The mean ABO-OGS score was satisfactory and did not differ by Angle classifications. The indices making substantial contributions to ABO-OGS were occlusal contacts, occlusal relationships, overjet, and alignment. Disocclusion time in post-orthodontic patients was longer than normal. Occlusion time, disocclusion time, and force distribution during dynamic motions were considerably influenced by static ABO-OGS measurements, especially occlusal contacts, buccolingual inclination, and alignment. CONCLUSION: Post-orthodontic cases that passed the static evaluation of clinicians and ABO-OGS may nevertheless be left with dental casts interference in dynamic motions. Both static and dynamic occlusion should be extensively evaluated before ending orthodontic treatment. Further research is needed on dynamic occlusal guidelines and standards.
Asunto(s)
Maloclusión , Ortodoncia , Humanos , Estados Unidos , Consejos de Especialidades , Reproducibilidad de los Resultados , Maloclusión/terapia , Oclusión DentalRESUMEN
Materials with a zero refractive index support electromagnetic modes that exhibit stationary phase profiles. While such materials have been realized across the visible and near-infrared spectral range, radiative and dissipative optical losses have hindered their development. We reduce losses in zero-index, on-chip photonic crystals by introducing high-Q resonances via resonance-trapped and symmetry-protected states. Using these approaches, we experimentally obtain quality factors of 2.6 × 103 and 7.8 × 103 at near-infrared wavelengths, corresponding to an order-of-magnitude reduction in propagation loss over previous designs. Our work presents a viable approach to fabricate zero-index on-chip nanophotonic devices with low-loss.
RESUMEN
OBJECTIVE: The present study was designed to explore endurable pressure intensity of different paranasal sinus mucosa in goats. METHOD: Mucosa commonly involved in maxillary sinus augmentation, including mucosa from maxillary sinus crest, maxillary sinus floor, and frontal sinus, were harvested in a computed tomography-guided manner. The obtained mucosa was then sectioned into square and irregular ones for maximum endurable pressure intensity determination and morphological observation, respectively. RESULTS: Thickness of paranasal sinus mucosa, as determined under morphological staining by an optical microscope with a graduated eyepiece, were calculated. And the results showed that the average thickness of maxillary sinus crest mucosa, floor mucosa, and frontal sinus mucosa in goats were 410.03 ± 65.97 µm, 461.33 ± 91.37 µm and 216.90 ± 46.47 µm, respectively. Significant differences between maxillary sinus crest and frontal sinus, maxillary sinus floor, and frontal sinus were observed (P < 0.05). Maximum endurable pressure intensity was determined by utilizing a self-made clamp device and the results revealed maximum endurable pressure intensity of maxillary sinus crest mucosa, floor mucosa and frontal sinus mucosa in goats were 260.08 ± 80.12Kpa, 306.90 ± 94.37Kpa and 121.72 ± 31.72Kpa, respectively. Also, a statistically significant difference was observed when comparing the endurable pressure intensity between maxillary sinus crest and frontal sinus, maxillary sinus floor, and frontal sinus (P < 0.05). Further correlation analysis also revealed a positive correlation between the thickness of mucosa of the maxillary sinus and frontal sinus and maximum endurable pressure intensity (P < 0.05). CONCLUSION: Mucosal thickness and maximum endurable pressure intensity of maxillary sinus crest and floor were larger than that of frontal sinus mucosa and a positive correlation between the thickness of mucosa and endurable pressure intensity was observed. Our results thus might provide an experimental basis and guidance for mucosa-related problems involved maxillary sinus augmentation.
Asunto(s)
Elevación del Piso del Seno Maxilar , Animales , Cabras , Humanos , Maxilar , Seno Maxilar/anatomía & histología , Seno Maxilar/diagnóstico por imagen , Membrana Mucosa , Elevación del Piso del Seno Maxilar/métodosRESUMEN
Recently, stem cells derived from the'inflamed' periodontal ligament (PDL) tissue of periodontally diseased teeth (I-PDLSCs) have been increasingly suggested as a more readily accessible source of cells for regenerative therapies than those derived from healthy PDL tissue (H-PDLSCs). However, substantial evidence indicates that I-PDLSCs exhibit impaired functionalities compared with H-PDLSCs. In this study, patient-matched I-PDLSCs and H-PDLSCs were co-cultured at various ratios. Cellular materials derived from these cultures were investigated regarding their osteogenic potential in vitro and capacity to form new bone following in vivo transplantation. While patient-matched I-PDLSCs and H-PDLSCs could co-exist in co-culture systems, the proportion of I-PDLSCs tended to increase during in vitro incubation. Compared with H-PDLSC monoculture, the presence of I-PDLSCs in the co-cultures appeared to enhance the overall cell proliferation. Although not completely rescued, the osteogenic and regenerative potentials of the cellular materials generated by co-cultured I-PDLSCs and H-PDLSCs were significantly improved compared with those derived from I-PDLSC monocultures. Notably, cells in co-cultures containing either 50% I-PDLSCs plus 50% H-PDLSCs or 25% I-PDLSCs plus 75% H-PDLSCs expressed osteogenesis-related proteins and genes at levels similar to those expressed in H-PDLSC monocultures (P>0.05). Irrespective of the percentage of I-PDLSCs, robust cellular materials were obtained from co-cultures with 50% or more H-PDLSCs, which exhibited equivalent potential to form new bone in vivo compared with sheets generated by H-PDLSC monocultures. These data suggest that the co-culture of I-PDLSCs with patient-matched H-PDLSCs is a practical and effective method for increasing the overall osteogenic and regenerative potentials of resultant cellular materials.
Asunto(s)
Técnicas de Cocultivo/métodos , Inflamación/patología , Ligamento Periodontal/patología , Células Madre/patología , Animales , Regeneración Ósea , Proliferación Celular , Femenino , Técnica del Anticuerpo Fluorescente , Humanos , Ratones , OsteogénesisRESUMEN
AIM: The aim of this study was to compare the properties of stem cells derived from "inflamed" and healthy periodontal ligament (PDL) tissues from patient-matched groups. MATERIAL AND METHODS: Patient-matched stem cells derived from root-attached "inflamed" and healthy PDL tissues from six donors, termed I-PDLSCs and H-PDLSCs, respectively, were investigated with regard to their stem cell properties, immunomodulatory effects and capacity to form robust cell sheets for therapeutic applications. RESULTS: We found that cells derived from both sources exhibited typical mesenchymal stem cell (MSC) characteristics. However, compared with H-PDLSCs, I-PDLSCs demonstrated an increased capacity to proliferate, a greater potential to migrate and a decreased capacity to differentiate into osteoblasts in vitro. When I-PDLSCs and H-PDLSCs were co-cultured with peripheral blood mononuclear cells, the MSCs derived from "inflamed" PDL tissues exhibited impaired immunomodulation. Although I-PDLSCs led to increased collagen type I, periostin and integrin ß1 content in the matrix, the cell sheets formed by I-PDLSCs were dysfunctional due to their impaired osteogenic/chondrogenic differentiation and tissue regeneration. CONCLUSIONS: These data provide additional evidence that I-PDLSCs are functionally compromised compared with H-PDLSCs. Nonetheless, their dominant abundance in the available tissues indicates that stem cells derived from damaged teeth extracted due to periodontitis warrant further exploration.
Asunto(s)
Ligamento Periodontal , Células Madre , Adulto , Diferenciación Celular , Proliferación Celular , Femenino , Humanos , Leucocitos Mononucleares , Masculino , Persona de Mediana Edad , OsteogénesisRESUMEN
Recently, twisted bilayer photonic materials have been extensively used for creating and studying photonic tunability through interlayer couplings. While twisted bilayer photonic materials have been experimentally demonstrated in microwave regimes, a robust platform for experimentally measuring optical frequencies has been elusive. Here, we demonstrate the first on-chip optical twisted bilayer photonic crystal with twist angle-tunable dispersion and great simulation-experiment agreement. Our results reveal a highly tunable band structure of twisted bilayer photonic crystals due to moiré scattering. This work opens the door to realizing unconventional twisted bilayer properties and novel applications in optical frequency regimes.
RESUMEN
We demonstrate a photonic analog of twisted bilayer graphene that has ultra-flat photonic bands and exhibits extreme slow-light behavior. Our twisted bilayer photonic device, which has an operating wavelength in the C-band of the telecom window, uses two crystalline silicon photonic crystal slabs separated by a methyl methacrylate tunneling layer. We numerically determine the magic angle using a finite-element method and the corresponding photonic band structure, which exhibits a flat band over the entire Brillouin zone. This flat band causes the group velocity to approach zero and introduces light localization, which enhances the electromagnetic field at the expense of bandwidth. Using our original plane-wave continuum model, we find that the photonic system has a larger band asymmetry. The band structure can easily be engineered by adjusting the device geometry, giving significant freedom in the design of devices. Our work provides a fundamental understanding of the photonic properties of twisted bilayer photonic crystals and opens the door to the nanoscale-based enhancement of nonlinear effects.
RESUMEN
Light travels in a zero-index medium without accumulating a spatial phase, resulting in perfect spatial coherence. Such coherence brings several potential applications, including arbitrarily shaped waveguides, phase-mismatch-free nonlinear propagation, large-area single-mode lasers, and extended superradiance. A promising platform to achieve these applications is an integrated Dirac-cone material that features an impedance-matched zero index. Although an integrated Dirac-cone material eliminates ohmic losses via its purely dielectric structure, it still entails out-of-plane radiation loss, limiting its applications to a small scale. We design an ultra-low-loss integrated Dirac cone material by achieving destructive interference above and below the material. The material consists of a square array of low-aspect-ratio silicon pillars embedded in silicon dioxide, featuring easy fabrication using a standard planar process. This design paves the way for leveraging the perfect spatial coherence of large-area zero-index materials in linear, nonlinear, and quantum optics.
RESUMEN
Crystal engineering is a practical approach for tailoring material properties. This approach has been widely studied for modulating optical and electrical properties of semiconductors. However, the properties of organic molecular crystals are difficult to control following a similar engineering route. In this Letter, we demonstrate that engineered crystals of Alq3 and Ir(ppy)3 complexes, which are commonly used in organic light-emitting technologies, possess intriguing functional properties. Specifically, these structures not only process efficient low-energy induced triplet excitation directly from the ground state of Alq3 but also can show strong emission at the Alq3 triplet energy level at room temperatures. We associate these phenomena with local deformations of the host matrix around the guest molecules, which in turn lead to a stronger host-guest triplet-triplet coupling and spin-orbital mixing.
RESUMEN
Directing cell trafficking toward a target site of interest is critical for advancing stem cell therapy in clinical theranostic applications. In this study, we investigated the effects of inflammatory and/or hypoxic stimuli on the migration of bone marrow mesenchymal stem cells (BMMSCs) during in vitro culture and after in vivo implantation. Using tablet scratch experiments and observations from a transwell system, we found that both inflammatory and hypoxic stimuli significantly enhanced cell migration. However, the combination of inflammatory and hypoxic stimuli did not result in a synergistic effect. The presence of stromal cell-derived factor-1 (SDF-1) significantly enhanced cell migration irrespective of the incubation conditions, and these positive effects could be blocked by treatment with AMD3100. Based on a time course experiment, we found that preconditioning cells with either inflammatory or hypoxic stimuli for 24 h or with both stimuli for 12 h led to high levels of chemokine receptor type 4 (CXCR4) expression. In vivo studies further demonstrated that pretreatment of BMMSCs with inflammatory and/or hypoxic stimuli resulted in an increased number of systemically injected cells migrating toward skin injuries, and local SDF-1 administration significantly increased cell migration. These findings suggest that in vitro control of either inflammatory or hypoxic stimuli has significant potential to enhance SDF-1-directed BMMSC migration via the upregulation of CXCR4 expression. Although combining the stimuli did not necessarily lead to a synergistic effect, the potential to reduce the dose and time required for cell preconditioning indicates that combinations of various strategies warrant further exploration.
Asunto(s)
Células de la Médula Ósea/citología , Movimiento Celular/efectos de los fármacos , Quimiocina CXCL12/farmacología , Inflamación/patología , Células Madre Mesenquimatosas/citología , Hipoxia de la Célula/efectos de los fármacos , Separación Celular , Humanos , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/metabolismo , Modelos Biológicos , Receptores CXCR4/metabolismo , Piel/patología , Factores de TiempoRESUMEN
BACKGROUND: Periodontal ligament stem cells (PDLSCs) derived from clinically compromised teeth with periodontitis are considered a readily accessible cell source, but their impaired stem cell functionalities, as observed in various in vitro and in vivo models, necessitate further investigation of these inflamed cells before their translation into therapeutic applications. In this study, the effects of conditioned media (CM) produced by stem cells derived from human healthy periodontal ligament tissues (H-PDLSCs) or inflamed periodontal ligament tissues (I-PDLSCs), referred to as H-CM and I-CM, respectively, on the biologic properties of H-PDLSCs and I-PDLSCs from the same donor are compared to explore the extent to which inflamed cells can be rescued by their extrinsic environment (i.e., by H-CM). METHODS: H-CM and I-CM were prepared from in vitro cell cultures, and the cellular responses of H-PDLSCs and I-PDLSCs to patient-matched H-CM and I-CM were investigated in terms of colony-forming ability, cell proliferation, and adipogenic/osteogenic differentiation. RESULTS: In H-CM and I-CM, H-PDLSCs and I-PDLSCs exhibited similar adipogenic potential. However, when incubated in I-CM, both cell types demonstrated an increased capacity to proliferate but a decreased capacity to differentiate into osteoblasts. Significantly, the impaired osteogenic differentiation of I-PDLSCs was partially rescued by incubation in H-CM under osteo-inducing conditions. CONCLUSION: The CM of patient-matched H-PDLSCs and I-PDLSCs differed, and the impaired osteogenic differentiation of inflamed stem cells had the potential to be rescued, at least partially, for therapeutic use via changing the cell culture microenvironment in vitro.
Asunto(s)
Diferenciación Celular , Osteogénesis , Ligamento Periodontal/fisiología , Células Madre , Proliferación Celular , Medios de Cultivo Condicionados , HumanosRESUMEN
Thin film photovoltaic (PV) technologies are highly attractive for low-cost solar energy conversion and possess a wide range of potential applications from building-integrated PV generation to portable power sources. Inverted nanocones (i-cones) have been demonstrated as a promising structure for practical thin film PV devices/modules, owning to their antireflection effect, self-cleaning function, superior mechanical robustness, and so forth. In this work, we have demonstrated a low-cost and scalable approach to achieve perfectly ordered i-cone arrays. Thereafter, thin film amorphous silicon (a-Si:H) solar cells have been fabricated based on various i-cone substrates with different aspect ratios and pitches to investigate the impact of geometry of i-cone nanostructures on the performance of the as-obtained PV devices. Intriguingly, the optical property investigations and device performance characterizations demonstrated that the 0.5-aspect-ratio i-cone-based device performed the best on both light absorption capability and energy conversion efficiency, which is 34% higher than that of the flat counterpart. Moreover, the i-cone-based device enhanced the light absorption and device performance over the flat reference device omnidirectionally. These results demonstrate a viable and convenient route toward scalable fabrication of nanostructures for high-performance thin film PV devices based on a broad range of materials.