RESUMEN
Background Current clinical imaging modalities such as CT and MRI provide resolution adequate to diagnose cardiovascular diseases but cannot depict detailed structural features in the heart across length scales. Hierarchical phase-contrast tomography (HiP-CT) uses fourth-generation synchrotron sources with improved x-ray brilliance and high energies to provide micron-resolution imaging of intact adult organs with unprecedented detail. Purpose To evaluate the capability of HiP-CT to depict the macro- to microanatomy of structurally normal and abnormal adult human hearts ex vivo. Materials and Methods Between February 2021 and September 2023, two adult human donor hearts were obtained, fixed in formalin, and prepared using a mixture of crushed agar in a 70% ethanol solution. One heart was from a 63-year-old White male without known cardiac disease, and the other was from an 87-year-old White female with a history of multiple known cardiovascular pathologies including ischemic heart disease, hypertension, and atrial fibrillation. Nondestructive ex vivo imaging of these hearts without exogenous contrast agent was performed using HiP-CT at the European Synchrotron Radiation Facility. Results HiP-CT demonstrated the capacity for high-spatial-resolution, multiscale cardiac imaging ex vivo, revealing histologic-level detail of the myocardium, valves, coronary arteries, and cardiac conduction system across length scales. Virtual sectioning of the cardiac conduction system provided information on fatty infiltration, vascular supply, and pathways between the cardiac nodes and adjacent structures. HiP-CT achieved resolutions ranging from gross (isotropic voxels of approximately 20 µm) to microscopic (approximately 6.4-µm voxel size) to cellular (approximately 2.3-µm voxel size) in scale. The potential for quantitative assessment of features in health and disease was demonstrated. Conclusion HiP-CT provided high-spatial-resolution, three-dimensional images of structurally normal and diseased ex vivo adult human hearts. Whole-heart image volumes were obtained with isotropic voxels of approximately 20 µm, and local regions of interest were obtained with resolution down to 2.3-6.4 µm without the need for sectioning, destructive techniques, or exogenous contrast agents. Published under a CC BY 4.0 license Supplemental material is available for this article. See also the editorial by Bluemke and Pourmorteza in this issue.
Asunto(s)
Corazón , Tomografía Computarizada por Rayos X , Humanos , Persona de Mediana Edad , Masculino , Femenino , Tomografía Computarizada por Rayos X/métodos , Corazón/diagnóstico por imagen , Anciano de 80 o más Años , Cardiopatías/diagnóstico por imagen , SincrotronesRESUMEN
OBJECTIVES: This study aimed to investigate the impact of calcific (Ca) on the efficacy of coronary computed coronary angiography (CTA) in evaluating plaque burden (PB) and composition with near-infrared spectroscopy-intravascular ultrasound (NIRS-IVUS) serving as the reference standard. MATERIALS AND METHODS: Sixty-four patients (186 vessels) were recruited and underwent CTA and 3-vessel NIRS-IVUS imaging (NCT03556644). Expert analysts matched and annotated NIRS-IVUS and CTA frames, identifying lumen and vessel wall borders. Tissue distribution was estimated using NIRS chemograms and the arc of Ca on IVUS, while in CTA Hounsfield unit cut-offs were utilized to establish plaque composition. Plaque distribution plots were compared at segment-, lesion-, and cross-sectional-levels. RESULTS: Segment- and lesion-level analysis showed no effect of Ca on the correlation of NIRS-IVUS and CTA estimations. However, at the cross-sectional level, Ca influenced the agreement between NIRS-IVUS and CTA for the lipid and Ca components (p-heterogeneity < 0.001). Proportional odds model analysis revealed that Ca had an impact on the per cent atheroma volume quantification on CTA compared to NIRS-IVUS at the segment level (p-interaction < 0.001). At lesion level, Ca affected differences between the modalities for maximum PB, remodelling index, and Ca burden (p-interaction < 0.001, 0.029, and 0.002, respectively). Cross-sectional-level modelling demonstrated Ca's effect on differences between modalities for all studied variables (p-interaction ≤ 0.002). CONCLUSION: Ca burden influences agreement between NIRS-IVUS and CTA at the cross-sectional level and causes discrepancies between the predictions for per cent atheroma volume at the segment level and maximum PB, remodelling index, and Ca burden at lesion-level analysis. CLINICAL RELEVANCE STATEMENT: Coronary calcification affects the quantification of lumen and plaque dimensions and the characterization of plaque composition coronary CTA. This should be considered in the analysis and interpretation of CTAs performed in patients with extensive Ca burden. KEY POINTS: Coronary CT Angiography is limited in assessing coronary plaques by resolution and blooming artefacts. Agreement between dual-source CT angiography and NIRS-IVUS is affected by a Ca burden for the per cent atheroma volume. Advanced CT imaging systems that eliminate blooming artefacts enable more accurate quantification of coronary artery disease and characterisation of plaque morphology.
RESUMEN
We describe the development of Lewis acid (LA) catalyst-impregnated 3D-printed stirrer devices and demonstrate their ability to facilitate the rapid screening of reaction conditions to synthesize heterocycles. The stereolithography 3D-printed stirrer devices were designed to fit round-bottomed flasks and Radleys carousel tubes using our recently reported solvent-resistant resin, and using CFD modeling studies and experimental data, we demonstrated that the device design leads to rapid mixing and rapid throughput over the device surface. Using a range of LA 3D-printed stirrers, the reaction between a diamine and an aldehyde was optimized for the catalyst and solvent, and we demonstrated that use of the 3D-printed catalyst-embedded devices led to higher yields and reduced reaction times. A library of benzimidazole and benzothiazole compounds were synthesized, and the use of devices led to efficient formation of the product as well as low levels of the catalyst in the resultant crude mixture. The use of these devices makes the process of setting up multiple reactions simpler by avoiding weighing out of catalysts, and the devices, once used, can be simply removed from the reaction, making the process of compound library synthesis more facile.
RESUMEN
SARS-CoV-2 has severely affected capacity in the National Health Service (NHS), and waiting lists are markedly increasing due to downtime of up to 50 min between patient consultations/procedures, to reduce the risk of infection. Ventilation accelerates this air cleaning, but retroactively installing built-in mechanical ventilation is often cost-prohibitive. We investigated the effect of using portable air cleaners (PAC), a low-energy and low-cost alternative, to reduce the concentration of aerosols in typical patient consultation/procedure environments. The experimental setup consisted of an aerosol generator, which mimicked the subject affected by SARS-CoV-19, and an aerosol detector, representing a subject who could potentially contract SARS-CoV-19. Experiments of aerosol dispersion and clearing were undertaken in situ in a variety of rooms with two different types of PAC in various combinations and positions. Correct use of PAC can reduce the clearance half-life of aerosols by 82% compared to the same indoor-environment without any ventilation, and at a broadly equivalent rate to built-in mechanical ventilation. In addition, the highest level of aerosol concentration measured when using PAC remains at least 46% lower than that when no mitigation is used, even if the PAC's operation is impeded due to placement under a table. The use of PAC leads to significant reductions in the level of aerosol concentration, associated with transmission of droplet-based airborne diseases. This could enable NHS departments to reduce the downtime between consultations/procedures.
Asunto(s)
Filtros de Aire , COVID-19 , Humanos , SARS-CoV-2 , Medicina Estatal , Aerosoles y Gotitas Respiratorias , HospitalesRESUMEN
BACKGROUND: Volumetric intravascular ultrasound (IVUS) analysis is currently performed at a fixed frame interval, neglecting the cyclic changes in vessel dimensions occurring during the cardiac cycle that can affect the reproducibility of the results. Analysis of end-diastolic (ED) IVUS frames has been proposed to overcome this limitation. However, at present, there is lack of data to support its superiority over conventional IVUS. OBJECTIVES: The present study aims to compare the reproducibility of IVUS volumetric analysis performed at a fixed frame interval and at the ED frames, identified retrospectively using a novel deep-learning methodology. METHODS: IVUS data acquired from 97 vessels were included in the present study; each vessel was segmented at 1 mm interval (conventional approach) and at ED frame twice by an expert analyst. Reproducibility was tested for the following metrics; normalized lumen, vessel and total atheroma volume (TAV), and percent atheroma volume (PAV). RESULTS: The mean length of the analyzed segments was 50.0 ± 24.1 mm. ED analysis was more reproducible than the conventional analysis for the normalized lumen (mean difference: 0.76 ± 4.03 mm3 vs. 1.72 ± 11.37 mm3 ; p for the variance of differences ratio < 0.001), vessel (0.30 ± 1.79 mm3 vs. -0.47 ± 10.26 mm3 ; p < 0.001), TAV (-0.46 ± 4.03 mm3 vs. -2.19 ± 14.39 mm3 ; p < 0.001) and PAV (-0.12 ± 0.59% vs. -0.34 ± 1.34%; p < 0.001). Results were similar when the analysis focused on the 10 mm most diseased segment. The superiority of the ED approach was due to a more reproducible detection of the segment of interest and to the fact that it was not susceptible to the longitudinal motion of the IVUS probe and the cyclic changes in vessel dimensions during the cardiac cycle. CONCLUSIONS: ED IVUS segmentation enables more reproducible volumetric analysis and quantification of TAV and PAV that are established end points in longitudinal studies assessing the efficacy of novel pharmacotherapies. Therefore, it should be preferred over conventional IVUS analysis as its higher reproducibility is expected to have an impact on the sample size calculation for the primary end point.
Asunto(s)
Enfermedad de la Arteria Coronaria , Placa Aterosclerótica , Enfermedad de la Arteria Coronaria/diagnóstico por imagen , Enfermedad de la Arteria Coronaria/tratamiento farmacológico , Vasos Coronarios/diagnóstico por imagen , Humanos , Reproducibilidad de los Resultados , Estudios Retrospectivos , Resultado del Tratamiento , Ultrasonografía Intervencional/métodosRESUMEN
BACKGROUND: Quantitative myocardial perfusion mapping using cardiovascular magnetic resonance (CMR) is validated for myocardial blood flow (MBF) estimation in native vessel coronary artery disease (CAD). Following coronary artery bypass graft (CABG) surgery, perfusion defects are often detected in territories supplied by the left internal mammary artery (LIMA) graft, but their interpretation and subsequent clinical management is variable. METHODS: We assessed myocardial perfusion using quantitative CMR perfusion mapping in 38 patients with prior CABG surgery, all with angiographically-proven patent LIMA grafts to the left anterior descending coronary artery (LAD) and no prior infarction in the LAD territory. Factors potentially determining MBF in the LIMA-LAD myocardial territory, including the impact of delayed contrast arrival through the LIMA graft were evaluated. RESULTS: Perfusion defects were reported on blinded visual analysis in the LIMA-LAD territory in 27 (71%) cases, despite LIMA graft patency and no LAD infarction. Native LAD chronic total occlusion (CTO) was a strong independent predictor of stress MBF (B = - 0.41, p = 0.014) and myocardial perfusion reserve (MPR) (B = - 0.56, p = 0.005), and was associated with reduced stress MBF in the basal (1.47 vs 2.07 ml/g/min; p = 0.002) but not the apical myocardial segments (1.52 vs 1.87 ml/g/min; p = 0.057). Extending the maximum arterial time delay incorporated in the quantitative perfusion algorithm, resulted only in a small increase (3.4%) of estimated stress MBF. CONCLUSIONS: Perfusion defects are frequently detected in LIMA-LAD subtended territories post CABG despite LIMA patency. Although delayed contrast arrival through LIMA grafts causes a small underestimation of MBF, perfusion defects are likely to reflect true reductions in myocardial blood flow, largely due to proximal native LAD disease.
Asunto(s)
Puente de Arteria Coronaria , Arterias Mamarias , Puente de Arteria Coronaria/efectos adversos , Humanos , Isquemia , Espectroscopía de Resonancia Magnética , Arterias Mamarias/diagnóstico por imagen , Arterias Mamarias/cirugía , Perfusión , Valor Predictivo de las PruebasRESUMEN
Despite advanced understanding of the biology of atherosclerosis, coronary heart disease remains the leading cause of death worldwide. Progress has been challenging as half of the individuals who suffer sudden cardiac death do not experience premonitory symptoms. Furthermore, it is well-recognized that also a plaque that does not cause a haemodynamically significant stenosis can trigger a sudden cardiac event, yet the majority of ruptured or eroded plaques remain clinically silent. In the past 30 years since the term 'vulnerable plaque' was introduced, there have been major advances in the understanding of plaque pathogenesis and pathophysiology, shifting from pursuing features of 'vulnerability' of a specific lesion to the more comprehensive goal of identifying patient 'cardiovascular vulnerability'. It has been also recognized that aside a thin-capped, lipid-rich plaque associated with plaque rupture, acute coronary syndromes (ACS) are also caused by plaque erosion underlying between 25% and 60% of ACS nowadays, by calcified nodule or by functional coronary alterations. While there have been advances in preventive strategies and in pharmacotherapy, with improved agents to reduce cholesterol, thrombosis, and inflammation, events continue to occur in patients receiving optimal medical treatment. Although at present the positive predictive value of imaging precursors of the culprit plaques remains too low for clinical relevance, improving coronary plaque imaging may be instrumental in guiding pharmacotherapy intensity and could facilitate optimal allocation of novel, more aggressive, and costly treatment strategies. Recent technical and diagnostic advances justify continuation of interdisciplinary research efforts to improve cardiovascular prognosis by both systemic and 'local' diagnostics and therapies. The present state-of-the-art document aims to present and critically appraise the latest evidence, developments, and future perspectives in detection, prevention, and treatment of 'high-risk' plaques occurring in 'vulnerable' patients.
Asunto(s)
Síndrome Coronario Agudo , Aterosclerosis , Enfermedad de la Arteria Coronaria , Enfermedad Coronaria , Placa Aterosclerótica , Muerte Súbita Cardíaca/etiología , Muerte Súbita Cardíaca/prevención & control , Humanos , Placa Aterosclerótica/diagnóstico por imagenRESUMEN
Fractional flow reserve is the gold standard for assessing the haemodynamic significance of intermediate coronary artery stenoses. Cumulative evidence has shown that FFR-guided revascularisation reduces stent implantations and improves patient outcomes. However, despite the wealth of evidence and guideline recommendations, its use in clinical practice remains minimal. Patient and technical limitations of FFR as well as the need for intracoronary instrumentation, use of adenosine, and increased costs have limited FFR's applicability in clinical practice. Over the last decade, several angiography-derived FFR software packages have been developed which do not require intracoronary pressure assessment with a guidewire or need for administration of hyperaemic agents. At present, there are 3 commercially available software packages and several other non-commercial technologies that have been described in the literature. These technologies have been validated against invasive FFR showing good accuracy and correlation. However, the methodology behind these solutions is different-some algorithms are based on solving the governing equations of fluid dynamics such as the Navier-Stokes equation while others have opted for a more simplified mathematical formula approach. The aim of this review is to critically appraise the methodology behind all the known angiography-derived FFR technologies highlighting the key differences and limitations.
Asunto(s)
Angiografía Coronaria , Estenosis Coronaria/diagnóstico por imagen , Reserva del Flujo Fraccional Miocárdico , Procesamiento de Imagen Asistido por Computador , Adenosina , Hemodinámica , Humanos , Valor Predictivo de las PruebasRESUMEN
Computed tomographic coronary angiography (CTCA) is a non-invasive imaging modality, which allows plaque burden and composition assessment and detection of plaque characteristics associated with increased vulnerability. In addition, CTCA-based coronary artery reconstruction enables local haemodynamic forces assessment, which regulate plaque formation and vascular inflammation and prediction of lesions that are prone to progress and cause events. However, the use of CTCA for vulnerable plaque detection in the clinical arena remains limited. To unlock the full potential of CTCA and enable its broad use, further work is needed to develop user-friendly processing tools that will allow fast and accurate analysis of CTCA, computational fluid dynamic modelling, and evaluation of the local haemodynamic forces. The present study aims to develop a seamless platform that will overcome the limitations of CTCA and enable fast and accurate evaluation of plaque morphology and physiology. We will analyse imaging data from 70 patients with coronary artery disease who will undergo state-of-the-art CTCA and near-infrared spectroscopy-intravascular ultrasound imaging and develop and train algorithms that will take advantage of the intravascular imaging data to optimise vessel segmentation and plaque characterisation. Furthermore, we will design an advanced module that will enable reconstruction of coronary artery anatomy from CTCA, blood flow simulation, shear stress estimation, and comprehensive visualisation of vessel pathophysiology. These advances are expected to facilitate the broad use of CTCA, not only for risk stratification but also for the evaluation of the effect of emerging therapies on plaque evolution.
Asunto(s)
Enfermedad de la Arteria Coronaria , Análisis de Datos , Angiografía por Tomografía Computarizada , Angiografía Coronaria , Humanos , Ultrasonografía IntervencionalRESUMEN
The direct electron transfer between human cytoglobin (Cygb) and the electrode surface, which would allow manipulating the oxidation states of the heme iron in Cygb, was first observed by immobilizing Cygb on a nanoporous gold (NPG) electrode via a carboxy-terminated alkanethiol. The voltammetric performances of the wild type and mutated Cygb-immobilized NPG electrodes were evaluated in the absence or presence of potential substrates. The obtained results demonstrated that the usefulness of the proposed method in understanding the function of Cygb in molecular basis.
Asunto(s)
Citoglobina/química , Técnicas Electroquímicas/métodos , Citoglobina/genética , Citoglobina/metabolismo , Electrodos , Transporte de Electrón , Oro/química , Humanos , Peróxido de Hidrógeno/química , Cinética , Mutagénesis Sitio-Dirigida , Nanoporos , Oxidación-Reducción , Proteínas Recombinantes/biosíntesis , Proteínas Recombinantes/química , Proteínas Recombinantes/aislamiento & purificaciónRESUMEN
Fast, miniature temperature sensors are required for various biomedical applications. Fibre-optics are particularly suited to minimally invasive procedures, and many types of fibre-optic temperature sensors have been demonstrated. In applications where rapidly varying temperatures are present, a fast and well-known response time is important; however, in many cases, the dynamic behaviour of the sensor is not well-known. In this article, we investigate the dynamic response of a polymer-based interferometric temperature sensor, using both an experimental technique employing optical heating with a pulsed laser, and a computational heat transfer model based on the finite element method. Our results show that the sensor has a time constant on the order of milliseconds and a -6 dB bandwidth of up to 178 Hz, indicating its suitability for applications such as flow measurement by thermal techniques, photothermal spectroscopy, and monitoring of thermal treatments.
Asunto(s)
Tecnología de Fibra Óptica , Interferometría , Monitoreo Fisiológico , Rayos Láser , TemperaturaRESUMEN
Intravascular imaging has enabled in vivo assessment of coronary artery pathology and detection of plaque characteristics that are associated with increased vulnerability. Prospective invasive imaging studies of coronary atherosclerosis have demonstrated that invasive imaging modalities can detect lesions that are likely to progress and cause cardiovascular events and provided unique insights about atherosclerotic evolution. However, despite the undoubted value of the existing imaging techniques in clinical and research arenas, all the available modalities have significant limitations in assessing plaque characteristics when compared with histology. Hybrid/multimodality intravascular imaging appears able to overcome some of the limitations of standalone imaging; however, there are only few histology studies that examined their performance in evaluating plaque pathobiology. In this article, we review the evidence about the efficacy of standalone and multi-modality/hybrid intravascular imaging in assessing plaque morphology against histology, highlight the advantages and limitations of the existing imaging techniques and discuss the future potential of emerging imaging modalities in the study of atherosclerosis.
Asunto(s)
Enfermedad de la Arteria Coronaria/diagnóstico por imagen , Procedimientos Endovasculares/métodos , Imagen Multimodal/métodos , Placa Aterosclerótica/diagnóstico por imagen , Enfermedad de la Arteria Coronaria/patología , Endosonografía , Predicción , Humanos , Técnicas Fotoacústicas/métodos , Placa Aterosclerótica/patología , Ondas de Radio , Espectrometría de Fluorescencia , Espectroscopía Infrarroja Corta , Tomografía de Coherencia ÓpticaRESUMEN
BACKGROUND: Attenuation-compensated (AC) technique was recently introduced to improve the plaque characterization of optical coherence tomography (OCT). Histological validation demonstrated promising results but the efficacy and reproducibility of this technique for assessing in-vivo tissue composition remains unclear.MethodsâandâResults:OCT images portraying native (n=200) and stented (n=200) segments and 31 histological cross-sections were analyzed. AC-OCT appeared superior to conventional (C)-OCT in detecting the external elastic lamina (EEM) borders (76% vs. 65.5%); AC-OCT enabled larger EEM arc detection compared with C-OCT (174.2±58.7° vs. 137.5±57.9°; P<0.001). There was poor agreement between the 2 techniques for detection of lipid in native and lipid and calcific tissue in stented segments (κ range: 0.164-0.466) but the agreement of C-OCT and AC-OCT was high for calcific tissue in native segments (κ=0.825). Intra and interobserver agreement of the 2 analysts was moderate to excellent with C-OCT (κ range: 0.681-0.979) and AC-OCT (κ range: 0.733-0.892) for all tissue types in both native and stented segments. Ex-vivoanalysis demonstrated that C-OCT was superior to AC-OCT (κ=0.545 vs. κ=0.296) for the detection of the lipid component in native segments. CONCLUSIONS: The AC technique allows better delineation of the EEM but it remains inferior for lipid pool detection and neointima characterization. Combined AC- and C-OCT imaging may provide additional value for complete assessment of plaque and neointima characteristics.
Asunto(s)
Enfermedad de la Arteria Coronaria , Vasos Coronarios , Placa Aterosclerótica , Tomografía de Coherencia Óptica , Anciano , Enfermedad de la Arteria Coronaria/diagnóstico por imagen , Enfermedad de la Arteria Coronaria/metabolismo , Vasos Coronarios/diagnóstico por imagen , Vasos Coronarios/metabolismo , Femenino , Humanos , Masculino , Persona de Mediana Edad , Placa Aterosclerótica/diagnóstico por imagen , Placa Aterosclerótica/metabolismoRESUMEN
Aims: As a sine qua non for arterial wall physiology, local hemodynamic forces such as endothelial shear stress (ESS) may influence long-term vessel changes as bioabsorbable scaffolds dissolve. The aim of this study was to perform serial computational fluid dynamic (CFD) simulations to examine immediate and long-term haemodynamic and vascular changes following bioresorbable scaffold placement. Methods and results: Coronary arterial models with long-term serial assessment (baseline and 5 years) were reconstructed through fusion of intravascular optical coherence tomography and angiography. Pulsatile non-Newtonian CFD simulations were performed to calculate the ESS and relative blood viscosity. Time-averaged, systolic, and diastolic results were compared between follow-ups. Seven patients (seven lesions) were included in this analysis. A marked heterogeneity in ESS and localised regions of high blood viscosity were observed post-implantation. Percent vessel area exposed to low averaged ESS (<1 Pa) significantly decreased over 5 years (15.92% vs. 4.99%, P < 0.0001) whereas moderate (1-7 Pa) and high ESS (>7 Pa) did not significantly change (moderate ESS: 76.93% vs. 80.7%, P = 0.546; high ESS: 7.15% vs. 14.31%, P = 0.281), leading to higher ESS at follow-up. A positive correlation was observed between baseline ESS and change in lumen area at 5 years (P < 0.0001). Maximum blood viscosity significantly decreased over 5 years (4.30 ± 1.54 vs. 3.21± 0.57, P = 0.028). Conclusion: Immediately after scaffold implantation, coronary arteries demonstrate an alternans of extremely low and high ESS values and localized areas of high blood viscosity. These initial local haemodynamic disturbances may trigger fibrin deposition and thrombosis. Also, low ESS can promote neointimal hyperplasia, but may also contribute to appropriate scaffold healing with normalisation of ESS and reduction in peak blood viscosity by 5 years.
Asunto(s)
Implantes Absorbibles , Vasos Coronarios/patología , Vasos Coronarios/fisiopatología , Endotelio Vascular/patología , Endotelio Vascular/fisiopatología , Modelos Cardiovasculares , Andamios del Tejido , Fenómenos Biomecánicos , Vasos Coronarios/cirugía , Endotelio Vascular/cirugía , Hidrodinámica , Imagenología Tridimensional , Estrés Mecánico , Factores de Tiempo , Tomografía de Coherencia ÓpticaRESUMEN
BACKGROUND: The shear stress distribution assessment can provide useful insights for the hemodynamic performance of the implanted stent/scaffold. Our aim was to investigate the effect of a novel bioresorbable scaffold, Mirage on local hemodynamics in animal models. METHOD: The main epicardial coronary arteries of 7 healthy mini-pigs were implanted with 11 Mirage Microfiber sirolimus-eluting Bioresorbable Scaffolds (MMSES). Optical coherence tomography (OCT) was performed post scaffold implantation and the obtained images were fused with angiographic data to reconstruct the coronary artery anatomy. Blood flow simulation was performed and Endothelial Shear Stress(ESS) distribution was estimated for each of the 11 scaffolds. ESS data were extracted in each circumferential 5-degree subunit of each cross-section in the scaffolded segment. The generalized linear mixed-effect analysis was implemented for the comparison of ESS in two scaffold groups; 150-µm strut thickness MMSES and 125-µm strut thickness MMSES. RESULTS: ESS was significantly higher in MMSES (150 µm) [0.85(0.49-1.40) Pa], compared to MMSES (125 µm) [0.68(0.35-1.18) Pa]. Both MMSES (150 µm) and MMSES (125 µm) revealed low recirculation zone percentages per luminal surface area [3.17% ± 1.97% in MMSES (150 µm), 2.71% ± 1.32% in MMSES (125 µm)]. CONCLUSION: Thinner strut Mirage scaffolds induced lower shear stress due to the small size vessels treated as compared to the thick strut version of the Mirage which was implanted in relatively bigger size vessels. Vessel size should be taken into account in planning BRS implantation. Small vessels may not get benefit from BRS implantation even with a streamlined strut profile. This pilot study warrants comparative assessment with commercially available bioresorbable scaffolds.
Asunto(s)
Implantes Absorbibles , Fármacos Cardiovasculares/administración & dosificación , Materiales Biocompatibles Revestidos , Vasos Coronarios/cirugía , Hemodinámica , Intervención Coronaria Percutánea/instrumentación , Sirolimus/administración & dosificación , Animales , Velocidad del Flujo Sanguíneo , Simulación por Computador , Circulación Coronaria , Vasos Coronarios/diagnóstico por imagen , Vasos Coronarios/fisiopatología , Modelos Animales , Modelos Cardiovasculares , Diseño de Prótesis , Estrés Mecánico , Porcinos , Porcinos Enanos , Factores de Tiempo , Tomografía de Coherencia ÓpticaRESUMEN
Local hemodynamic forces are well-known to modulate atherosclerotic evolution, which remains one of the largest cause of death worldwide. Percutaneous coronary interventions with stent implantation restores blood flow to the downstream myocardium and is only limited by stent failure caused by restenosis, stent thrombosis, or neoatherosclerosis. Cumulative evidence has shown that local hemodynamic forces affect restenosis and the platelet activation process, modulating the pathophysiological mechanisms that lead to stent failure. This article first covers the pathophysiological mechanisms through which wall shear stress regulates arterial disease formation/neointima proliferation and the role of shear rate on stent thrombosis. Subsequently, the article reviews the current evidence on (1) the implications of stent design on the local hemodynamic forces, and (2) how stent/scaffold expansion can influence local flow, thereby affecting the risk of adverse events.
Asunto(s)
Enfermedad de la Arteria Coronaria/terapia , Circulación Coronaria , Reestenosis Coronaria/etiología , Trombosis Coronaria/etiología , Vasos Coronarios/fisiopatología , Intervención Coronaria Percutánea/efectos adversos , Intervención Coronaria Percutánea/instrumentación , Stents , Animales , Proliferación Celular , Enfermedad de la Arteria Coronaria/sangre , Enfermedad de la Arteria Coronaria/diagnóstico por imagen , Enfermedad de la Arteria Coronaria/fisiopatología , Reestenosis Coronaria/diagnóstico por imagen , Reestenosis Coronaria/patología , Reestenosis Coronaria/fisiopatología , Trombosis Coronaria/diagnóstico por imagen , Trombosis Coronaria/fisiopatología , Vasos Coronarios/diagnóstico por imagen , Vasos Coronarios/patología , Endotelio Vascular/fisiopatología , Hemodinámica , Humanos , Neointima , Diseño de Prótesis , Falla de Prótesis , Factores de Riesgo , Estrés Mecánico , Resultado del TratamientoRESUMEN
Macrocyclic peptide-mimetic molecules are attracting renewed attention and have found widespread application in research fields ranging from biochemical science to materials science. Herein, we describe the synthesis and structural elucidation of cyclo[n]-p-arylopeptoids (classified into cyclic aromatic ε-amino acids) bearing various side chains, namely, C[n]pAP(Rn) (where n inside brackets denotes the number of main chain units and R inside parentheses represents side chains). We investigate the influence of n and R on the macrocyclization efficiency of linear p-arylopeptoid oligomers (n = 3, 4, 5) under high-dilution conditions with or without slow addition. The structures of the cyclo[4]-p-arylopeptoids (C[4]pAP(Rn)) and their conformational dynamics are disclosed on the basis of single-crystal X-ray analyses, viable-temperature (VT) 1H NMR studies, and density functional theory (DFT) calculations. We found two representative conformations (open and closed) of cyclo[4]-p-arylopeptoids (C[4]pAP(Rn)) in the solid state and whose preference in the solution state was most likely dependent on solvent polarity. We believe that this simple but dynamic macrocyclic peptide-mimetic molecular scaffold would be attractive for developing new functional molecular tools based on rational molecular design as well as molecular library screening strategies.
Asunto(s)
Compuestos Macrocíclicos/química , Compuestos Macrocíclicos/síntesis química , Peptidomiméticos/química , Peptidomiméticos/síntesis química , Peptoides/química , Polimerizacion , Técnicas de Química Sintética , Modelos Moleculares , Conformación MolecularRESUMEN
OBJECTIVE: A retrospective analysis on carboplatin(CBDCA)/nanoparticle albumin-boundpaclitaxel(nab-PTX)combination chemotherapy was conducted in patients with non-small-cell lung cancer(NSCLC)to evaluate both the efficacy and toxicity based on age, treatment line, histology, and underlying diseases. SUBJECTS: A total of 27 patients with advanced or recurrent NSCLC following surgery who receivedCBDCA /nab-PTX as first- andsecond -line combination chemotherapy, respectively, were investigatedfrom March 2013 to December 2015. RESULTS: The overall response rate, median progressionfree survival, andmed ian overall survival of all patients were 37.0%, 5.5 months, and 11.4 months, respectively. With regard to toxicity, 3.7%and 14.8%of all patients had peripheral disorder and interstitial lung disease(ILD), respectively. Treatmentrelatedd eaths were not observed. No difference in the efficacy basedon age, treatment line, histology, andund erlying diseases was observed. CONCLUSION: CBDCA/nab-PTX combination chemotherapy was safe for elderly patients and those with ILD. However, the occurrence of new interstitial lung lesions should be carefully considered.
Asunto(s)
Protocolos de Quimioterapia Combinada Antineoplásica/uso terapéutico , Carcinoma de Pulmón de Células no Pequeñas/tratamiento farmacológico , Neoplasias Pulmonares/tratamiento farmacológico , Anciano , Albúminas/administración & dosificación , Albúminas/efectos adversos , Protocolos de Quimioterapia Combinada Antineoplásica/efectos adversos , Carboplatino/administración & dosificación , Carboplatino/efectos adversos , Carcinoma de Pulmón de Células no Pequeñas/cirugía , Femenino , Humanos , Neoplasias Pulmonares/cirugía , Masculino , Persona de Mediana Edad , Paclitaxel/administración & dosificación , Paclitaxel/efectos adversos , Recurrencia , Estudios RetrospectivosRESUMEN
A realistic mock circulatory system (MCS) could be a valuable in vitro testbed to study human circulatory hemodynamics. The objective of this study was to design a MCS replicating the pulmonary arterial circulation, incorporating an anatomically representative arterial model suitable for testing clinically relevant scenarios. A second objective of the study was to ensure the system's compatibility with magnetic resonance imaging (MRI) for additional measurements. A latex pulmonary arterial model with two generations of bifurcations was manufactured starting from a 3D-printed mold reconstructed from patient data. The model was incorporated into a MCS for in vitro hydrodynamic measurements. The setup was tested under physiological pulsatile flow conditions and results were evaluated using wave intensity analysis (WIA) to investigate waves traveling in the arterial system. Increased pulmonary vascular resistance (IPVR) was simulated as an example of one pathological scenario. Flow split between right and left pulmonary artery was found to be realistic (54 and 46%, respectively). No substantial difference in pressure waveform was observed throughout the various generations of bifurcations. Based on WIA, three main waves were identified in the main pulmonary artery (MPA), that is, forward compression wave, backward compression wave, and forward expansion wave. For IPVR, a rise in mean pressure was recorded in the MPA, within the clinical range of pulmonary arterial hypertension. The feasibility of using the MCS in the MRI scanner was demonstrated with the MCS running 2 h consecutively while acquiring preliminary MRI data. This study shows the development and verification of a pulmonary MCS, including an anatomically correct, compliant latex phantom. The setup can be useful to explore a wide range of hemodynamic questions, including the development of patient- and pathology-specific models, considering the ease and low cost of producing rapid prototyping molds, and the versatility of the setup for invasive and noninvasive (i.e., MRI) measurements.