One-Step Photochemical Green Synthesis of Water-Dispersible Ag, Au, and Au@Ag Core-Shell Nanoparticles.

A simple and green synthetic protocol for the rapid and effective preparation of Ag, Au and Au@Ag core-shell nanoparticles (NPs) is reported based on the light irradiation of a biocompatible, water-soluble dextran functionalized with benzophenone (BP) in the presence of AgNO3 , HAuCl4 , or both. Photoactivation of the BP moiety produces the highly reducing ketyl radicals through fast (<50 ns) intramolecular H-abstraction from the dextran scaffold, which, in turn, ensures excellent dispersibility of the obtained metal NPs in water. The antibacterial activity of the AgNPs and the photothermal action of the Au@Ag core-shell are also shown.

A non-covalent "click chemistry" strategy to efficiently coat highly porous MOF nanoparticles with a stable polymeric shell.

BACKGROUND: Metal-organic framework nanoparticles (nanoMOFs) are biodegradable highly porous materials with a remarkable ability to load therapeutic agents with a wide range of physico-chemical properties. Engineering the nanoMOFs surface may provide nanoparticles with higher stability, controlled release, and targeting abilities. Designing postsynthetic, non-covalent self-assembling shells for nanoMOFs is especially appealing due to their simplicity, versatility, absence of toxic byproducts and minimum impact on the original host-guest ability. METHODS: In this study, several ß-cyclodextrin-based monomers and polymers appended with mannose or rhodamine were randomly phosphorylated, and tested as self-assembling coating building blocks for iron trimesate MIL-100(Fe) nanoMOFs. The shell formation and stability were studied by isothermal titration calorimetry (ITC), spectrofluorometry and confocal imaging. The effect of the coating on tritium-labeled AZT-PT drug release was estimated by scintillation counting. RESULTS: Shell formation was conveniently achieved by soaking the nanoparticles in self-assembling agent aqueous solutions. The grafted phosphate moieties enabled a firm anchorage of the coating to the nanoMOFs. Coating stability was directly related to the density of grafted phosphate groups, and did not alter nanoMOFs morphology or drug release kinetics. CONCLUSION: An easy, fast and reproducible non-covalent functionalization of MIL-100(Fe) nanoMOFs surface based on the interaction between phosphate groups appended to ß-cyclodextrin derivatives and iron(III) atoms is presented. GENERAL SIGNIFICANCE: This study proved that discrete and polymeric phosphate ß-cyclodextrin derivatives can conform non-covalent shells on iron(III)-based nanoMOFs. The flexibility of the ß-cyclodextrin to be decorated with different motifs open the way towards nanoMOFs modifications for drug delivery, catalysis, separation, imaging and sensing. This article is part of a Special Issue entitled "Recent Advances in Bionanomaterials" Guest Editors: Dr. Marie-Louise Saboungi and Dr. Samuel D. Bader.

ß-Cyclodextrin-bearing gold glyconanoparticles for the development of site specific drug delivery systems.

Three novel gold nanoparticles containing multiple long, flexible linkers decorated with lactose, ß-cyclodextrin, and both simultaneously have been prepared. The interaction of such nanoparticles with ß-d-galactose-recognizing lectins peanut agglutinin (PNA) and human galectin-3 (Gal-3) was demonstrated by UV-vis studies. Gal-3 is well-known to be overexpressed in several human tumors and can act as a biorecognizable target. This technique also allowed us to estimate their loading capability toward the anticancer drug methotrexate (MTX). Both results make these glyconanoparticles potential site-specific delivery systems for anticancer drugs.

Poly(amido amine)-based mannose-glycodendrimers as multielectron redox probes for improving lectin sensing.

An easy-to-prepare series of electroactive poly(amido amine) (PAMAM)-based dendrimers of generations G0 to G2 having mannopyranosylferrocenyl moieties in the periphery to detect carbohydrate-protein interactions is reported. The synthesis involved the functionalization of the PAMAM surface with azidomethylferrocenyl groups and subsequent coupling of mannoside units by the Cu(I)-catalyzed Huisgen reaction. The binding affinity of the series of electroactive glycodendrimers was studied by isothermal titration calorimetry (ITC) and differential pulse voltammetry (DPV). Upon complexation of the glycodendrimers conjugates with prototypical concanavalin A (Con A), voltammograms showed a decrease of the peak current. Such dendrimers showed a notable improvement of redox sensing abilities toward Con A when compared with mono- and divalent analogues, based on both the glycoside multivalent and ferrocene dendritic effects.

Femto- to micro-second photobehavior of photosensitizer drug trapped within a cyclodextrin dimer.

The interactions of 5,10,15,20-tetrakis(4-sulfonatophenyl)-porphyrin (TSPP, a singlet oxygen photosensitiser molecule) with a hexa-2,4-diynediyl bridged ß-cyclodextrin dimer (CD-CD) in aqueous solutions of pH 7 were studied using steady-state UV-visible absorption/emission and femto- to millisecond time-resolved spectroscopy. TSPP forms 1 : 1 complexes with CD-CD (K(e) = 1.9 × 10(8) M(-1) at 293 K). The value of K(e) indicates a high affinity of TSPP to form complexes with CD-CD. The chemical nano-cavity has a notable effect on the fluorescence lifetimes of the Q(x) state (9.3 ns in water and 10.8 ns in CD-CD). The rotational times (410 ps for TSPP in water and 0.03 ns (12%) and 1.1 ns (88%) for the TSPP:CD-CD complexes) indicate the robustness of the formed entities, and fast depolarization of emission, most probably involving the porphyrin skeleton and phenyl ring motions. The ultrafast femtosecond component (60-100 fs) of TSPP is moderately affected by the confining environment, which instead strongly influences the ps component (1-2 ps in water and 5 ps within CD-CD) assigned to the vibrational relaxation of the Q(x) state. Moreover, a 50 ps component emerges in the emission transients in the 640-720 nm range, and which is assigned to a thermalization of the hot Q(x) state. The effect of O2 on the triplet state of the encapsulated TSPP was also studied and discussed in light of the shielding effect of the CD-CD cavity. We observed comparable quantum yield (0.62 and 0.69) of the generated singlet molecular oxygen of TSPP without and with CD-CD. We believe that our results on the molecular interaction between TSPP and CD-CD from femtosecond to millisecond regime at both ground and electronically first excited states give relevant information for improving our understanding of this kind of caged drugs, and thus for a better design of drug:nanocarrier complexes. A particular implication for the use of CD-CD as a drug carrier is the high affinity of this host for complex formation with TSPP, while the yield of singlet oxygen generation is still high.

Citric acid-γ-cyclodextrin crosslinked oligomers as carriers for doxorubicin delivery.

Two citric acid crosslinked γ-cyclodextrin oligomers (pγ-CyD) with a MW of 21-33 kDa and 10-15 γ-CyD units per molecule were prepared by following green chemistry methods and were fully characterized. The non-covalent association of doxorubicin (DOX) with these macromolecules was investigated in neutral aqueous medium by means of circular dichroism (CD), UV-vis absorption and fluorescence. Global analysis of multiwavelength spectroscopic CD and fluorescence titration data, taking into account the DOX monomer-dimer equilibrium, evidenced the formation of 1 : 1 and 1 : 2 pγ-CyD unit-DOX complexes. The binding constants are 1-2 orders of magnitude higher than those obtained for γ-CyD and depend on the characteristics of the oligomer batch used. The concentration profiles of the species in solution evidence the progressive monomerization of DOX with increasing oligomer concentration. Confocal fluorescence imaging and spectral imaging showed a similar drug distribution within the MCF-7 cell line incubated with either DOX complexed to pγ-CyD or free DOX. In both cases DOX is taken up into the cell nucleus without any degradation.

Nanoscale metal-organic frameworks for the delivery of nucleic acids to cancer cells.

Therapeutic nucleic acids (TNAs) are gaining increasing interest in the treatment of severe diseases including viral infections, inherited disorders, and cancers. However, the efficacy of intracellularly functioning TNAs is also reliant upon their delivery into the cellular environment, as unmodified nucleic acids are unable to cross the cell membrane mainly due to charge repulsion. Here we show that TNAs can be effectively delivered into the cellular environment using engineered nanoscale metal-organic frameworks (nanoMOFs), with the additional ability to tailor which cells receive the therapeutic cargo determined by the functional moieties grafted onto the nanoMOF's surface. This study paves the way to integrate the highly ordered programmable nucleic acids into larger-scale functionalized nanoassemblies.

Identifying and characterizing binding sites on the irreversible inhibition of human glutathione S-transferase P1-1 by S-thiocarbamoylation.

Human glutathione S-transferase P1-1 (hGST P1-1) is involved in cell detoxification processes through the conjugation of its natural substrate, reduced glutathione (GSH), with xenobiotics. GSTs are known to be overexpressed in tumors, and naturally occurring isothiocyanates, such as benzyl isothiocyanate (BITC), are effective cancer chemopreventive compounds. To identify and characterize the potential inhibitory mechanisms of GST P1-1 induced by isothiocyanate conjugates, we studied the binding of GST P1-1 and some cysteine mutants to the BITC-SG conjugate as well as to the synthetic S-(N-benzylcarbamoylmethyl)glutathione conjugate (BC-SG). We report here the inactivation of GST P1-1 through the covalent modification of two Cys47 residues per dimer and one Cys101. The evidence has been compiled by isothermal titration calorimetry (ITC) and electrospray ionization mass spectrometry (ESI-MS). ITC experiments suggest that the BITC-SG conjugate generates adducts with Cys47 and Cys101 at physiological temperatures through a corresponding kinetic process, in which the BITC moiety is covalently bound to these enzyme cysteines through an S-thiocarbamoylation reaction. ESI-MS analysis of the BITC-SG incubated enzymes indicates that although the Cys47 in each subunit is covalently attached to the BITC ligand moiety, only one of the Cys101 residues in the dimer is so attached. A plausible mechanism is given for the emergence of inactivation through the kinetic processes with both cysteines. Likewise, our molecular docking simulations suggest that steric hindrance is the reason why only one Cys101 per dimer is covalently modified by BITC-SG. No covalent inactivation of GST P1-1 with the BC-SG inhibitor has been observed. The affinities and inhibitory potencies for both conjugates are high and very similar, but slightly lower for BC-SG. Thus, we conclude that the presence of the sulfur atom from the isothiocyanate moiety in BITC-SG is crucial for its irreversible inhibition of GST P1-1.

Ferrocene labelings as inhibitors and dual electrochemical sensors of human glutathione S-transferase P1-1.

The inhibitory and sensor properties of two ferrocene conjugates, in which the ferrocene and glutathione are linked through a spacer arm of different length and chemical structure, on human Pi glutathione S-transferase, were examined by activity assays, ITC, fluorescence spectroscopy and voltammetry. Such ferrocene conjugates are strong competitive inhibitors of this enzyme with an enhanced binding affinity, the one bearing the longest spacer arm being the most potent inhibitor. Voltammetric measurements showed a strong decrease of the peak current intensity and an increase of the oxidation potential upon binding of ferrocene-glutathione conjugates to GST P1-1 showing that both conjugates can be used as dual electrochemical sensors for GST P1-1.

Porous Metal-Organic Framework Nanoparticles.

Metal-organic frameworks (MOFs) are hybrid crystalline particles composed of metal cations and organic linkers [...].

Diuretic drug binding to human glutathione transferase P1-1: potential role of Cys-101 revealed in the double mutant C47S/Y108V.

The diuretic drug ethacrynic acid (EA), both an inhibitor and substrate of pi class glutathione S-transferase (GST P1-1), has been tested in clinical trials as an adjuvant in chemotherapy. We recently studied the role of the active site residue Tyr-108 in binding EA to the enzyme and found that the analysis was complicated by covalent binding of this drug to the highly reactive Cys-47. Previous attempts to eliminate this binding by chemical modification yielded ambiguous results and therefore we decided here to produce a double mutant C47S/Y108V by site directed mutagenesis and further expression in Escherichia coli and the interaction of EA and its GSH conjugate (EASG) examined by calorimetric studies and X-ray diffraction. Surprisingly, in the absence of Cys-47, Cys-101 (located at the dimer interface) becomes a target for modification by EA, albeit at a lower conjugation rate than Cys-47. The Cys-47 → Ser mutation in the double mutant enzyme induces a positive cooperativity between the two subunits when ligands with affinity to G-site bind to enzyme. However, this mutation does not seem to affect the thermodynamic properties of ligand binding to the electrophilic binding site (H-site) and the thermal or chemical stability of this double mutant does not significantly affect the unfolding mechanism in either the absence or presence of ligand. Crystal structures of apo and an EASG complex are essentially identical with a few exceptions in the H-site and in the water network at the dimer interface.

ß-Cyclodextrin dimers linked through their secondary faces with rigid spacer arms as hosts for bile salts.

A convenient synthesis of ß-cyclodextrin dimers in which the two cyclodextrin units are linked by rigid tethers of relatively short length through their secondary sides is reported. Compounds hexa-2,4-diynediyl- and 1,4-phenylenediethyne-briged ß-cyclodextrin dimers are obtained in good yields from mono-2-O-propargyl-ß-cyclodextrin through Pd-mediated oxidative homo- and heterocoupling reactions. Isothermal titration calorimetry and NMR spectroscopy (PGSE and 2D-ROESY) are used to determine the thermodynamic parameters (K, ΔH, and TΔS°) for the complexation of such ß-cyclodextrin dimers with sodium cholate, deoxycholate, and chenodeoxycholate as well as to estimate the size of the supramolecular structures. The binding of bile salts is enhanced relative to that of native ß-cyclodextrin. Although chenodeoxycholate salt binds in a 1:1 fashion, cholate and deoxycholate salts bind in a 1:2 sequential mode.

Facile synthesis of per(6-O-tert-butyldimethylsilyl)-α-, ß-, and γ-cyclodextrin as protected intermediates for the functionalization of the secondary face of the macrocycles.

Per(6-O-tert-butyldimethylsilyl)-α-, ß- and γ-cyclodextrin derivatives are well-known as synthetic intermediates that enable the selective mono-, partial, or perfunctionalization of the secondary face of the macrocycles. Although silylation of the primary rim is readily achieved by treatment with tert-butyldimethylsilyl chloride in the presence of pyridine (either alone or mixed with a co-solvent), the reaction typically results in a mixture containing both under- and oversilylated byproducts that are difficult to remove. To address this challenge in preparing a pure product in high yield, we describe an approach that centers on the addition of a controlled excess of silylating agent to avoid the presence of undersilylated species, followed by the removal of oversilylated species by column chromatography elution with carefully designed solvent mixtures. This methodology works well for 6-, 7-, and 8-member rings (α-, ß-, and γ-cyclodextrins, respectively) and has enabled us to repeatedly prepare up to ⁓35 g of ≥98% pure product (as determined by HPLC) in 3 d. We also provide procedures for lower-scale reactions, as well as an example of how the ß-cyclodextrin derivative can be used for functionalization of the secondary face of the molecule.

Porous nanoparticles with engineered shells release their drug cargo in cancer cells.

Highly porous nanoscale metal-organic frameworks (nanoMOFs) attract growing interest as drug nanocarriers. However, engineering "stealth" nanoMOFs with poly(ethylene glycol) (PEG) coatings remains a main challenge. Here we address the goal of coating nanoMOFs with biodegradable shells using novel cyclodextrin (CD)-based oligomers with a bulky structure to avoid their penetration inside the open nanoMOF porosity. The PEG chains were grafted by click chemistry onto the CDs which were further crosslinked by citric acid. Advantageously, the oligomers' free citrate units allowed their spontaneous anchoring onto the nanoMOFs by complexation with the iron sites in the top layers. Up to 31 wt% oligomers could be firmly attached by simple incubation with the nanoMOFs in an aqueous medium. Moreover, the anticancer drug doxorubicin (DOX) was successfully entrapped in the core-shell nanoMOFs with loadings up to 41 wt%. High resolution STEM (HR-STEM) showed that the organized crystalline structures were preserved. Remarkably, at the highest loadings, DOX was poorly released out of the nanoMOFs at pH 7.4 (<2% in 2 days). In contrast, around 80% of DOX was released out at pH 4.5 of artificial lysosomal fluid in 24 h. Confocal microscopy investigations showed that the DOX-loaded nanoMOFs penetrated inside Hela cancer cell together with their PEG shells. There, they released the DOX cargo which further diffused inside the nucleus to eradicate the cancer cells.

Multivalent Lactose-Ferrocene Conjugates Based on Poly (Amido Amine) Dendrimers and Gold Nanoparticles as Electrochemical Probes for Sensing Galectin-3.

Galectin-3 is considered a cancer biomarker and bioindicator of fibrosis and cardiac remodeling and, therefore, it is desirable to develop convenient methods for its detection. Herein, an approach based on the development of multivalent electrochemical probes with high galectin-3 sensing abilities is reported. The probes consist of multivalent presentations of lactose-ferrocene conjugates scaffolded on poly (amido amine) (PAMAM) dendrimers and gold nanoparticles. Such multivalent lactose-ferrocene conjugates are synthesized by coupling of azidomethyl ferrocene-lactose building blocks on alkyne-functionalized PAMAM, for the case of the glycodendrimers, and to disulfide-functionalized linkers that are then used for the surface modification of citrate-stabilized gold nanoparticles. The binding and sensing abilities toward galectin-3 of both ferrocene-containing lactose dendrimers and gold nanoparticles have been evaluated by means of isothermal titration calorimetry, UV-vis spectroscopy, and differential pulse voltammetry. The highest sensitivity by electrochemical methods to galectin-3 was shown by lactosylferrocenylated gold nanoparticles, which are able to detect the lectin in nanomolar concentrations.

Self-assembled multifunctional core-shell highly porous metal-organic framework nanoparticles.

Core-shell nanoparticles (NPs) are attracting increasing interest in nanomedicine as they exhibit unique properties arising from the combined assets of core and shell materials. Porous nanoscale metal-organic frameworks (nanoMOFs) are able to incorporate with high payloads a large variety of drugs. Like other types of NPs, nanoMOFs need to be functionalized with engineered coatings to ensure colloidal stability, control in vivo fate and drug release. To do so, a novel biodegradable cyclodextrin (CD)-based shell was designed in this study. Water soluble γ-CD-citrate oligomers grafted or not with fluorophores were successfully synthesized using citric acid as crosslinker and efficiently anchored onto the surface of porous nanoMOFs. As compared to monomeric CDs, the oligomeric CD coatings could offer higher interaction possibilities with the cores and better possibilities to graft functional moieties such as fluorescent molecules. The amounts of γ-CD-citrate oligomers onto the nanoMOFs were as high as 53 ± 8 wt%. The yield reached up to 86% in the optimized system. These core-shell nanocomposites were stable upon storage, in contrast to the naked nanoMOFs. In addition, the presence of the coating prevented the doxorubicin (DOX)-loaded nanoMOFs from aggregation. Moreover, due to the presence of fluorophores conjugated to the shell, fluorescence-lifetime microscopy enabled deciphering the coating mechanism. DOX loadings reached 48 ± 10 wt% after 24 h incubation with the drug solution. After coating for additional 24 h, DOX loadings reached 65 ± 8 wt%.

Kinetic and thermodynamic characterization of dUTP hydrolysis by Plasmodium falciparum dUTPase.

Deoxyuridine 5'-triphosphate nucleotidohydrolase (dUTPase) catalyzes the hydrolysis of dUTP to dUMP and pyrophosphate and plays an important role in nucleotide metabolism and DNA replication controlling relative cellular levels of dTTP/dUTP, both of which can be incorporated into DNA. Isothermal titration calorimetry has been applied to the determination of the kinetic and thermodynamic parameters of the trimeric Plasmodium falciparum dUTPase, a potential drug target against malaria. The role of divalent ions in binding, and inhibition by different uridine derivatives has been assessed. When dUTP hydrolysis in the presence of EDTA was evaluated, a 105-fold decrease and a 12-fold increase of the k(cat) and Km values, respectively, were observed when compared with the dUTP.Mg2+ complex. Calculation of the activation energy, E(a), and the thermodynamic activation parameters showed that the energetic barrier was approximately 4-fold higher when Mg2+ was depleted. Other divalent ions such as Co2+ or Mn2+ can substitute the physiological cofactor, however the k(cat) was significantly reduced compared to dUTP.Mg2+. Binding and inhibition by dU, dUMP, dUDP, and alpha,beta-imido-dUTP were analysed by ITC and compared with data obtained by spectrophotometric methods and binding equilibrium studies. Product inhibition (Kip dUMP: 99.34 microM) was insignificant yet Ki values for dUDP and alpha,beta-imido-dUTP were in the low micromolar range. The effect of ionic strength on protein stability was also monitored. DSC analysis evidenced a slight increase in the unfolding temperature, Tm, with increasing salt concentrations. Moreover, the thermal unfolding pathway in the presence of salt fits adequately to an irreversible two-state model (N3-->3D).

Ferrocene-beta-cyclodextrin conjugates: synthesis, supramolecular behavior, and use as electrochemical sensors.

Ferrocene with a beta-cyclodextrin unit bound to one or both cyclopentadienyl rings through the secondary face were conveniently synthesized by regiospecific copper(I)-catalyzed cycloaddition of 2-O-propargyl-beta-cyclodextrin to azidomethyl or bis(azidomethyl)ferrocene. The supramolecular behavior of the synthesized conjugates in both the absence and presence of bile salts (sodium cholate, deoxycholate, and chenodeoxycholate) was studied by using electrochemical methods (cyclic and differential pulse voltammetry), isothermal titration calorimetry, and NMR spectroscopy (PGSE, CPMG, and 2D-ROESY). These techniques allowed the determination of stability constants, mode of inclusion, and diffusion coefficients for complexes formed with the neutral and, in some cases, the oxidized states of the ferrocenyl conjugates. It was found that the ferrocenyl conjugate with one beta-cyclodextrin unit forms a redox-controllable head-to-head homodimer in aqueous solution. The ferrocene-bis(beta-cyclodextrin) conjugate is present in two distinguishable forms in aqueous solution, each one having a different half-wave oxidation potential for the oxidation of the ferrocene. By contrast, only one distinguishable form for the oxidized state of the ferrocene-beta-cyclodextrin conjugate is detectable. The redox-sensing abilities of the synthesized conjugates towards the bile salts were evaluated based on the observed guest-induced changes in both the half-wave potential and the current peak intensity of the electroactive moiety.

Ferrocene-carbohydrate conjugates as electrochemical probes for molecular recognition studies.

We report two methods that have allowed the attachment of glucose, mannose and lactose to one or both of the cyclopentadienyl rings of ferrocene. The resulting ferrocene-carbohydrate conjugates were synthesised by the reaction of thioglycosides with ferrocenemethanol and 1,1'-ferrocenedimethanol in acidic media. A second method based on the regiospecific copper(I)-catalysed cycloaddition of propargyl glycoside, azidomethyl and bis(azidomethyl)ferrocene as well as azidoethyl glycoside and ethynylferrocene was also used and led to the synthesis of 1,2,3-triazole-containing glycoconjugates. The electrochemical behaviour of the synthesised glycoconjugates was investigated. In addition, their binding interactions with beta-cyclodextrin were studied by means of NMR spectroscopy, isothermal titration calorimetry, and cyclic and differential pulse voltammetric experiments. These techniques allowed the determination of the thermodynamic parameters of the complexes, the stability constants for the complexes formed with both the neutral and the oxidised states of the ferrocenyl glycoconjugates, the mode of inclusion and the diffusion coefficients for both the glycoconjugates and the complexes.

Design of Engineered Cyclodextrin Derivatives for Spontaneous Coating of Highly Porous Metal-Organic Framework Nanoparticles in Aqueous Media.

Nanosized metal-organic frameworks (nanoMOFs) MIL-100(Fe) are highly porous and biodegradable materials that have emerged as promising drug nanocarriers. A challenging issue concerns their surface functionalization in order to evade the immune system and to provide molecular recognition ability, so that they can be used for specific targeting. A convenient method for their coating with tetraethylene glycol, polyethylene glycol, and mannose residues is reported herein. The method consists of the organic solvent-free self-assembly on the nanoMOFs of building blocks based on ß-cyclodextrin facially derivatized with the referred functional moieties, and multiple phosphate groups to anchor to the nanoparticles' surface. The coating of nanoMOFs with cyclodextrin phosphate without further functional groups led to a significant decrease of macrophage uptake, slightly improved by polyethylene glycol or mannose-containing cyclodextrin phosphate coating. More notably, nanoMOFs modified with tetraethylene glycol-containing cyclodextrin phosphate displayed the most efficient "stealth" effect. Mannose-coated nanoMOFs displayed a remarkably enhanced binding affinity towards a specific mannose receptor, such as Concanavalin A, due to the multivalent display of the monosaccharide, as well as reduced macrophage internalization. Coating with tetraethylente glycol of nanoMOFs after loading with doxorubicin is also described. Therefore, phosphorylated cyclodextrins offer a versatile platform to coat nanoMOFs in an organic solvent-free, one step manner, providing them with new biorecognition and/or "stealth" properties.