Radiomics Correlation to CD68+ Tumor-Associated Macrophages in Clear Cell Renal Cell Carcinoma.

INTRODUCTION: Renal cell carcinoma (RCC) is the ninth most common cancer worldwide, with clear cell RCC (ccRCC) being the most frequent histological subtype. The tumor immune microenvironment (TIME) of ccRCC is an important factor to guide treatment, but current assessments are tissue-based, which can be time-consuming and resource-intensive. In this study, we used radiomics extracted from clinically performed computed tomography (CT) as a noninvasive surrogate for CD68 tumor-associated macrophages (TAMs), a significant component of ccRCC TIME. METHODS: TAM population was measured by CD68+/PanCK+ ratio and tumor-TAM clustering was measured by normalized K function calculated from multiplex immunofluorescence (mIF). A total of 1,076 regions on mIF slides from 78 patients were included. Radiomic features were extracted from multiphase CT of the ccRCC tumor. Statistical machine learning models, including random forest, Adaptive Boosting, and ElasticNet, were used to predict TAM population and tumor-TAM clustering. RESULTS: The best models achieved an area under the ROC curve of 0.81 (95% CI: [0.69, 0.92]) for TAM population and 0.77 (95% CI: [0.66, 0.88]) for tumor-TAM clustering, respectively. CONCLUSION: Our study demonstrates the potential of using CT radiomics-derived imaging markers as a surrogate for assessment of TAM in ccRCC for real-time treatment response monitoring and patient selection for targeted therapies and immunotherapies.

Investigating the role of imaging factors in the variability of CT-based texture analysis metrics.

OBJECTIVE: This study assesses the robustness of first-order radiomic texture features namely interquartile range (IQR), coefficient of variation (CV) and standard deviation (SD) derived from computed tomography (CT) images by varying dose, reconstruction algorithms and slice thickness using scans of a uniform water phantom, a commercial anthropomorphic liver phantom, and a human liver in-vivo. MATERIALS AND METHODS: Scans were acquired on a 16 cm detector GE Revolution Apex Edition CT scanner with variations across three different nominal slice thicknesses: 0.625, 1.25, and 2.5 mm, three different dose levels: CTDIvol of 13.86 mGy for the standard dose, 40% reduced dose and 60% reduced dose and two different reconstruction algorithms: a deep learning image reconstruction (DLIR-high) algorithm and a hybrid iterative reconstruction (IR) algorithm ASiR-V50% (AV50) were explored, varying one at a time. To assess the effect of non-linear modifications of images by AV50 and DLIR-high, images of the water phantom were also reconstructed using filtered back projection (FBP). Quantitative measures of IQR, CV and SD were extracted from twelve pre-selected, circular (1 cm diameter) regions of interest (ROIs) capturing different texture patterns across all scans. RESULTS: Across all scans, imaging, and reconstruction settings, CV, IQR and SD were observed to increase with reduction in dose and slice thickness. An exception to this observation was found when using FBP reconstruction. Lower values of CV, IQR and SD were observed in DLIR-high reconstructions compared to AV50 and FBP. The Poisson statistics were more stringently noted in FBP than DLIR-high and AV50, due to the non-linear nature of the latter two algorithms. CONCLUSION: Variation in image noise due to dose reduction algorithms, tube current, and slice thickness show a consistent trend across phantom and patient scans. Prospective evaluation across multiple centers, scanners and imaging protocols is needed for establishing quality assurance standards of radiomics.

Technical and clinical considerations of a physical liver phantom for CT radiomics analysis.

OBJECTIVE: This study identifies key characteristics to help build a physical liver computed tomography (CT) phantom for radiomics harmonization; particularly, the higher-order texture metrics. MATERIALS AND METHODS: CT scans of a radiomics phantom comprising of 18 novel 3D printed inserts with varying size, shape, and material combinations were acquired on a 64-slice CT scanner (Brilliance 64, Philips Healthcare). The images were acquired at 120 kV, 250 mAs, CTDIvol of 16.36 mGy, 2 mm slice thickness, and iterative noise-reduction reconstruction (iDose, Philips Healthcare, Andover, MA). Radiomics analysis was performed using the Cancer Imaging Phenomics Toolkit (CaPTk), following automated segmentation of 3D regions of interest (ROI) of the 18 inserts. The findings were compared to three additional ROI obtained of an anthropomorphic liver phantom, a patient liver CT scan, and a water phantom, at comparable imaging settings. Percentage difference in radiomic metrics values between phantom and tissue was used to assess the biological equivalency and <10% was used to claim equivalent. RESULTS: The HU for all 18 ROI from the phantom ranged from -30 to 120 which is within clinically observed HU range of the liver, showing that our phantom material (T3-6B) is representative of biological CT tissue densities (liver) with >50% radiomic features having <10% difference from liver tissue. Based on the assessment of the Neighborhood Gray Tone Difference Matrix (NGTDM) metrics it is evident that the water phantom ROI show extreme values compared to the ROIs from the phantom. This result may further reinforce the difference between a structureless quantity such as water HU values and tissue HU values found in liver. CONCLUSION: The 3-D printed patterns of the constructed radiomics phantom cover a wide span of liver tissue textures seen in CT images. Using our results, texture metrics can be selectively harmonized to establish clinically relevant and reliable radiomics panels.

Radiogenomic Associations Clear Cell Renal Cell Carcinoma: An Exploratory Study.

INTRODUCTION: This study investigates how quantitative texture analysis can be used to non-invasively identify novel radiogenomic correlations with clear cell renal cell carcinoma (ccRCC) biomarkers. METHODS: The Cancer Genome Atlas-Kidney Renal Clear Cell Carcinoma open-source database was used to identify 190 sets of patient genomic data that had corresponding multiphase contrast-enhanced CT images in The Cancer Imaging Archive. 2,824 radiomic features spanning fifteen texture families were extracted from CT images using a custom-built MATLAB software package. Robust radiomic features with strong inter-scanner reproducibility were selected. Random forest, AdaBoost, and elastic net machine learning (ML) algorithms evaluated the ability of the selected radiomic features to predict the presence of 12 clinically relevant molecular biomarkers identified from the literature. ML analysis was repeated with cases stratified by stage (I/II vs. III/IV) and grade (1/2 vs. 3/4). 10-fold cross validation was used to evaluate model performance. RESULTS: Before stratification by tumor grade and stage, radiomics predicted the presence of several biomarkers with weak discrimination (AUC 0.60-0.68). Once stratified, radiomics predicted KDM5C, SETD2, PBRM1, and mTOR mutation status with acceptable to excellent predictive discrimination (AUC ranges from 0.70 to 0.86). CONCLUSIONS: Radiomic texture analysis can potentially identify a variety of clinically relevant biomarkers in patients with ccRCC and may have a prognostic implication.

Sarcopenia and body fat change as risk factors for radiologic incisional hernia following robotic nephrectomy.

OBJECTIVE: To assess the effect of body muscle and fat metrics on the development of radiologic incisional hernia (IH) following robotic nephrectomy. MATERIALS AND METHODS: We retrospectively reviewed the records of patients who underwent robotic nephrectomy for kidney tumors between 2011 and 2017. All pre- and postoperative CTs were re-reviewed by experienced radiologists for detection of radiologic IH and calculation of the following metrics using Synapse 3D software: cross-sectional psoas muscle mass at the level of L3 and L4 as well as subcutaneous and visceral fat areas. Sarcopenia was defined as psoas muscle index below the lowest quartile. Cox proportional hazard model was constructed to examine the association between muscle and fat metrics and the risk of developing radiologic IH. RESULTS: A total of 236 patients with a median (IQR) age of 64 (54-70) years were included in this study. In a median (IQR) follow-up of 23 (14-38) months, 62 (26%) patients developed radiologic IH. On Cox proportional hazard model, we were unable to detect an association between sarcopenia and risk of IH development. In terms of subcutaneous fat change from pre-op, both lower and higher values were associated with IH development (HR (95% CI) 2.1 (1.2-3.4), p = 0.01 and 2.4 (1.4-4.1), p < 0.01 for < Q1 and ≥ Q3, respectively). Similar trend was found for visceral fat area changes from pre-op with a HR of 2.8 for < Q1 and 1.8 for ≥ Q3. CONCLUSION: Both excessive body fat gain and loss are associated with development of radiologic IH in patients undergoing robotic nephrectomy.

CT-based radiomics stratification of tumor grade and TNM stage of clear cell renal cell carcinoma.

OBJECTIVES: To evaluate the utility of CT-based radiomics signatures in discriminating low-grade (grades 1-2) clear cell renal cell carcinomas (ccRCC) from high-grade (grades 3-4) and low TNM stage (stages I-II) ccRCC from high TNM stage (stages III-IV). METHODS: A total of 587 subjects (mean age 60.2 years ± 12.2; range 22-88.7 years) with ccRCC were included. A total of 255 tumors were high grade and 153 were high stage. For each subject, one dominant tumor was delineated as the region of interest (ROI). Our institutional radiomics pipeline was then used to extract 2824 radiomics features across 12 texture families from the manually segmented volumes of interest. Separate iterations of the machine learning models using all extracted features (full model) as well as only a subset of previously identified robust metrics (robust model) were developed. Variable of importance (VOI) analysis was performed using the out-of-bag Gini index to identify the top 10 radiomics metrics driving each classifier. Model performance was reported using area under the receiver operating curve (AUC). RESULTS: The highest AUC to distinguish between low- and high-grade ccRCC was 0.70 (95% CI 0.62-0.78) and the highest AUC to distinguish between low- and high-stage ccRCC was 0.80 (95% CI 0.74-0.86). Comparable AUCs of 0.73 (95% CI 0.65-0.8) and 0.77 (95% CI 0.7-0.84) were reported using the robust model for grade and stage classification, respectively. VOI analysis revealed the importance of neighborhood operation-based methods, including GLCM, GLDM, and GLRLM, in driving the performance of the robust models for both grade and stage classification. CONCLUSION: Post-validation, CT-based radiomics signatures may prove to be useful tools to assess ccRCC grade and stage and could potentially add to current prognostic models. Multiphase CT-based radiomics signatures have potential to serve as a non-invasive stratification schema for distinguishing between low- and high-grade as well as low- and high-stage ccRCC. KEY POINTS: • Radiomics signatures derived from clinical multiphase CT images were able to stratify low- from high-grade ccRCC, with an AUC of 0.70 (95% CI 0.62-0.78). • Radiomics signatures derived from multiphase CT images yielded discriminative power to stratify low from high TNM stage in ccRCC, with an AUC of 0.80 (95% CI 0.74-0.86). • Models created using only robust radiomics features achieved comparable AUCs of 0.73 (95% CI 0.65-0.80) and 0.77 (95% CI 0.70-0.84) to the model with all radiomics features in classifying ccRCC grade and stage, respectively.

Non-Invasive Profiling of Advanced Prostate Cancer via Multi-Parametric Liquid Biopsy and Radiomic Analysis.

Integrating liquid biopsies of circulating tumor cells (CTCs) and cell-free DNA (cfDNA) with other minimally invasive measures may yield more comprehensive disease profiles. We evaluated the feasibility of concurrent cellular and molecular analysis of CTCs and cfDNA combined with radiomic analysis of CT scans from patients with metastatic castration-resistant PC (mCRPC). CTCs from 22 patients were enumerated, stained for PC-relevant markers, and clustered based on morphometric and immunofluorescent features using machine learning. DNA from single CTCs, matched cfDNA, and buffy coats was sequenced using a targeted amplicon cancer hotspot panel. Radiomic analysis was performed on bone metastases identified on CT scans from the same patients. CTCs were detected in 77% of patients and clustered reproducibly. cfDNA sequencing had high sensitivity (98.8%) for germline variants compared to WBC. Shared and unique somatic variants in PC-related genes were detected in cfDNA in 45% of patients (MAF > 0.1%) and in CTCs in 92% of patients (MAF > 10%). Radiomic analysis identified a signature that strongly correlated with CTC count and plasma cfDNA level. Integration of cellular, molecular, and radiomic data in a multi-parametric approach is feasible, yielding complementary profiles that may enable more comprehensive non-invasive disease modeling and prediction.

Whole-tumor 3D volumetric MRI-based radiomics approach for distinguishing between benign and malignant soft tissue tumors.

OBJECTIVES: Our purpose was to differentiate between malignant from benign soft tissue neoplasms using a combination of MRI-based radiomics metrics and machine learning. METHODS: Our retrospective study identified 128 histologically diagnosed benign (n = 36) and malignant (n = 92) soft tissue lesions. 3D ROIs were manually drawn on 1 sequence of interest and co-registered to other sequences obtained during the same study. One thousand seven hundred eight radiomics features were extracted from each ROI. Univariate analyses with supportive ROC analyses were conducted to evaluate the discriminative power of predictive models constructed using Real Adaptive Boosting (Adaboost) and Random Forest (RF) machine learning approaches. RESULTS: Univariate analyses demonstrated that 36.89% of individual radiomics varied significantly between benign and malignant lesions at the p ≤ 0.05 level. Adaboost and RF performed similarly well, with AUCs of 0.77 (95% CI 0.68-0.85) and 0.72 (95% CI 0.63-0.81), respectively, after 10-fold cross-validation. Restricting the machine learning models to only sequences extracted from T2FS and STIR sequences maintained comparable performance, with AUCs of 0.73 (95% CI 0.64-0.82) and 0.75 (95% CI 0.65-0.84), respectively. CONCLUSION: Machine learning decision classifiers constructed from MRI-based radiomics features show promising ability to preoperatively discriminate between benign and malignant soft tissue masses. Our approach maintains applicability even when the dataset is restricted to T2FS and STIR fluid-sensitive sequences, which may bolster practicality in clinical application scenarios by eliminating the need for complex co-registrations for multisequence analysis. KEY POINTS: • Predictive models constructed from MRI-based radiomics data and machine learning-augmented approaches yielded good discriminative power to correctly classify benign and malignant lesions on preoperative scans, with AUCs of 0.77 (95% CI 0.68-0.85) and 0.72 (95% CI 0.63-0.81) for Real Adaptive Boosting (Adaboost) and Random Forest (RF), respectively. • Restricting the models to only use metrics extracted from T2 fat-saturated (T2FS) and Short-Tau Inversion Recovery (STIR) sequences yielded similar performance, with AUCs of 0.73 (95% CI 0.64-0.82) and 0.75 (95% CI 0.65-0.84) for Adaboost and RF, respectively. • Radiomics-based machine learning decision classifiers constructed from multicentric data more closely mimic the real-world practice environment and warrant additional validation ahead of prospective implementation into clinical workflows.

Shape and texture-based radiomics signature on CT effectively discriminates benign from malignant renal masses.

OBJECTIVES: Using a radiomics framework to quantitatively analyze tumor shape and texture features in three dimensions, we tested its ability to objectively and robustly distinguish between benign and malignant renal masses. We assessed the relative contributions of shape and texture metrics separately and together in the prediction model. MATERIALS AND METHODS: Computed tomography (CT) images of 735 patients with 539 malignant and 196 benign masses were segmented in this retrospective study. Thirty-three shape and 760 texture metrics were calculated per tumor. Tumor classification models using shape, texture, and both metrics were built using random forest and AdaBoost with tenfold cross-validation. Sensitivity analyses on five sub-cohorts with respect to the acquisition phase were conducted. Additional sensitivity analyses after multiple imputation were also conducted. Model performance was assessed using AUC. RESULTS: Random forest classifier showed shape metrics featuring within the top 10% performing metrics regardless of phase, attaining the highest variable importance in the corticomedullary phase. Convex hull perimeter ratio is a consistently high-performing shape feature. Shape metrics alone achieved an AUC ranging 0.64-0.68 across multiple classifiers, compared with 0.67-0.75 and 0.68-0.75 achieved by texture-only and combined models, respectively. CONCLUSION: Shape metrics alone attain high prediction performance and high variable importance in the combined model, while being independent of the acquisition phase (unlike texture). Shape analysis therefore should not be overlooked in its potential to distinguish benign from malignant tumors, and future radiomics platforms powered by machine learning should harness both shape and texture metrics. KEY POINTS: • Current radiomics research is heavily weighted towards texture analysis, but quantitative shape metrics should not be ignored in their potential to distinguish benign from malignant renal tumors. • Shape metrics alone can attain high prediction performance and demonstrate high variable importance in the combined shape and texture radiomics model. • Any future radiomics platform powered by machine learning should harness both shape and texture metrics, especially since tumor shape (unlike texture) is independent of the acquisition phase and more robust from the imaging variations.

Identification of robust and reproducible CT-texture metrics using a customized 3D-printed texture phantom.

OBJECTIVE: The objective of this study was to evaluate the robustness and reproducibility of computed tomography-based texture analysis (CTTA) metrics extracted from CT images of a customized texture phantom built for assessing the association of texture metrics to three-dimensional (3D) printed progressively increasing textural heterogeneity. MATERIALS AND METHODS: A custom-built 3D-printed texture phantom comprising of six texture patterns was used to evaluate the robustness and reproducibility of a radiomics panel under a variety of routine abdominal imaging protocols. The phantom was scanned on four CT scanners (Philips, Canon, GE, and Siemens) to assess reproducibility. The robustness assessment was conducted by imaging the texture phantom across different CT imaging parameters such as slice thickness, field of view (FOV), tube voltage, and tube current for each scanner. The texture panel comprised of 387 features belonging to 15 subgroups of texture extraction methods (e.g., Gray-level Co-occurrence Matrix: GLCM). Twelve unique image settings were tested on all the four scanners (e.g., FOV125). Interclass correlation two-way mixed with absolute agreement (ICC3) was used to assess the robustness and reproducibility of radiomic features. Linear regression was used to test the association between change in radiomic features and increased texture heterogeneity. Results were summarized in heat maps. RESULTS: A total of 5612 (23.2%) of 24 090 features showed excellent robustness and reproducibility (ICC ≥ 0.9). Intensity, GLCM 3D, and gray-level run length matrix (GLRLM) 3D features showed best performance. Among imaging variables, changes in slice thickness affected all metrics more intensely compared to other imaging variables in reducing the ICC3. From the analysis of linear trend effect of the CTTA metrics, the top three metrics with high linear correlations across all scanners and scanning settings were from the GLRLM 2D/3D and discrete cosine transform (DCT) texture family. CONCLUSION: The choice of scanner and imaging protocols affect texture metrics. Furthermore, not all CTTA metrics have a linear association with linearly varying texture patterns.

Benchmarking Various Radiomic Toolkit Features While Applying the Image Biomarker Standardization Initiative toward Clinical Translation of Radiomic Analysis.

The image biomarkers standardization initiative (IBSI) was formed to address the standardization of extraction of quantifiable imaging metrics. Despite its effort, there remains a lack of consensus or established guidelines regarding radiomic feature terminology, the underlying mathematics and their implementation across various software programs. This creates a scenario where features extracted using different toolboxes cannot be used to build or validate the same model leading to a non-generalization of radiomic results. In this study, IBSI-established phantom and benchmark values were used to compare the variation of the radiomic features while using 6 publicly available software programs and 1 in-house radiomics pipeline. All IBSI-standardized features (11 classes, 173 in total) were extracted. The relative differences between the extracted feature values from the different software programs and the IBSI benchmark values were calculated to measure the inter-software agreement. To better understand the variations, features are further grouped into 3 categories according to their properties: 1) morphology, 2) statistic/histogram and 3)texture features. While a good agreement was observed for a majority of radiomics features across the various tested programs, relatively poor agreement was observed for morphology features. Significant differences were also found in programs that use different gray-level discretization approaches. Since these software programs do not include all IBSI features, the level of quantitative assessment for each category was analyzed using Venn and UpSet diagrams and quantified using two ad hoc metrics. Morphology features earned lowest scores for both metrics, indicating that morphological features are not consistently evaluated among software programs. We conclude that radiomic features calculated using different software programs may not be interchangeable. Further studies are needed to standardize the workflow of radiomic feature extraction.

Myocardial Radiomics in Cardiac MRI.

OBJECTIVE. The purpose of this article is to review the nascent field of radiomics in cardiac MRI. CONCLUSION. Cardiac MRI produces a large number of images in a fairly inefficient manner with sometimes limited clinical application. In the era of precision medicine, there is increasing need for imaging to account for a broader array of diseases in an efficient and objective manner. Radiomics, the extraction and analysis of quantitative imaging features from medical imaging, may offer potential solutions to this need.

Radiomics in Pulmonary Lesion Imaging.

OBJECTIVE: Diagnostic imaging has traditionally relied on a limited set of qualitative imaging characteristics for the diagnosis and management of lung cancer. Radiomics-the extraction and analysis of quantitative features from imaging-can identify additional imaging characteristics that cannot be seen by the eye. These features can potentially be used to diagnose cancer, identify mutations, and predict prognosis in an accurate and noninvasive fashion. This article provides insights about trends in radiomics of lung cancer and challenges to widespread adoption. CONCLUSION: Radiomic studies are currently limited to a small number of cancer types. Its application across various centers are nonstandardized, leading to difficulties in comparing and generalizing results. The tools available to apply radiomics are specialized and limited in scope, blunting widespread use and clinical integration in the general population. Increasing the number of multicenter studies and consortiums and inclusion of radiomics in resident training will bring more attention and clarity to the growing field of radiomics.

Texture Analysis of Imaging: What Radiologists Need to Know.

OBJECTIVE: Radiologic texture is the variation in image intensities within an image and is an important part of radiomics. The objective of this article is to discuss some parameters that affect the performance of texture metrics and propose recommendations that can guide both the design and evaluation of future radiomics studies. CONCLUSION: A variety of texture-extraction techniques are used to assess clinical imaging data. Currently, no consensus exists regarding workflow, including acquisition, extraction, or reporting of variable settings leading to poor reproducibility.

Reliability of CT-based texture features: Phantom study.

OBJECTIVE: To determine the intra-, inter- and test-retest variability of CT-based texture analysis (CTTA) metrics. MATERIALS AND METHODS: In this study, we conducted a series of CT imaging experiments using a texture phantom to evaluate the performance of a CTTA panel on routine abdominal imaging protocols. The phantom comprises of three different regions with various textures found in tumors. The phantom was scanned on two CT scanners viz. the Philips Brilliance 64 CT and Toshiba Aquilion Prime 160 CT scanners. The intra-scanner variability of the CTTA metrics was evaluated across imaging parameters such as slice thickness, field of view, post-reconstruction filtering, tube voltage, and tube current. For each scanner and scanning parameter combination, we evaluated the performance of eight different types of texture quantification techniques on a predetermined region of interest (ROI) within the phantom image using 235 different texture metrics. We conducted the repeatability (test-retest) and robustness (intra-scanner) test on both the scanners and the reproducibility test was conducted by comparing the inter-scanner differences in the repeatability and robustness to identify reliable CTTA metrics. Reliable metrics are those metrics that are repeatable, reproducible and robust. RESULTS: As expected, the robustness, repeatability and reproducibility of CTTA metrics are variably sensitive to various scanner and scanning parameters. Entropy of Fast Fourier Transform-based texture metrics was overall most reliable across the two scanners and scanning conditions. Post-processing techniques that reduce image noise while preserving the underlying edges associated with true anatomy or pathology bring about significant differences in radiomic reliability compared to when they were not used. CONCLUSION: Following large-scale validation, identification of reliable CTTA metrics can aid in conducting large-scale multicenter CTTA analysis using sample sets acquired using different imaging protocols, scanners etc.

Differentiation of Predominantly Solid Enhancing Lipid-Poor Renal Cell Masses by Use of Contrast-Enhanced CT: Evaluating the Role of Texture in Tumor Subtyping.

OBJECTIVE: The purpose of this study was to assess the accuracy of a panel of texture features extracted from clinical CT in differentiating benign from malignant solid enhancing lipid-poor renal masses. MATERIALS AND METHODS: In a retrospective case-control study of 174 patients with predominantly solid nonmacroscopic fat-containing enhancing renal masses, 129 cases of malignant renal cell carcinoma were found, including clear cell, papillary, and chromophobe subtypes. Benign renal masses-oncocytoma and lipid-poor angiomyolipoma-were found in 45 patients. Whole-lesion ROIs were manually segmented and coregistered from the standard-of-care multiphase contrast-enhanced CT (CECT) scans of these patients. Pathologic diagnosis of all tumors was obtained after surgical resection. CECT images of the renal masses were used as inputs to a CECT texture analysis panel comprising 31 texture metrics derived with six texture methods. Stepwise logistic regression analysis was used to select the best predictor among all candidate predictors from each of the texture methods, and their performance was quantified by AUC. RESULTS: Among the texture predictors aiding renal mass subtyping were entropy, entropy of fast-Fourier transform magnitude, mean, uniformity, information measure of correlation 2, and sum of averages. These metrics had AUC values ranging from good (0.80) to excellent (0.98) across the various subtype comparisons. The overall CECT-based tumor texture model had an AUC of 0.87 (p < 0.05) for differentiating benign from malignant renal masses. CONCLUSION: The CT texture statistical model studied was accurate for differentiating benign from malignant solid enhancing lipid-poor renal masses.

A Decision-Support Tool for Renal Mass Classification.

We investigate the viability of statistical relational machine learning algorithms for the task of identifying malignancy of renal masses using radiomics-based imaging features. Features characterizing the texture, signal intensity, and other relevant metrics of the renal mass were extracted from multiphase contrast-enhanced computed tomography images. The recently developed formalism of relational functional gradient boosting (RFGB) was used to learn human-interpretable models for classification. Experimental results demonstrate that RFGB outperforms many standard machine learning approaches as well as the current diagnostic gold standard of visual qualification by radiologists.

Conditional generative learning for medical image imputation.

Image imputation refers to the task of generating a type of medical image given images of another type. This task becomes challenging when the difference between the available images, and the image to be imputed is large. In this manuscript, one such application is considered. It is derived from the dynamic contrast enhanced computed tomography (CECT) imaging of the kidneys: given an incomplete sequence of three CECT images, we are required to impute the missing image. This task is posed as one of probabilistic inference and a generative algorithm to generate samples of the imputed image, conditioned on the available images, is developed, trained, and tested. The output of this algorithm is the "best guess" of the imputed image, and a pixel-wise image of variance in the imputation. It is demonstrated that this best guess is more accurate than those generated by other, deterministic deep-learning based algorithms, including ones which utilize additional information and more complex loss terms. It is also shown that the pixel-wise variance image, which quantifies the confidence in the reconstruction, can be used to determine whether the result of the imputation meets a specified accuracy threshold and is therefore appropriate for a downstream task.

A Narrative Review of the Use of Artificial Intelligence in Breast, Lung, and Prostate Cancer.

Artificial intelligence (AI) has been an important topic within radiology. Currently, AI is used clinically to assist with the detection of lesions through detection systems. However, a number of recent studies have demonstrated the increased value of neural networks in radiology. With an increasing number of screening requirements for cancers, this review aims to study the accuracy of the numerous AI models used in the detection and diagnosis of breast, lung, and prostate cancers. This study summarizes pertinent findings from reviewed articles and provides analysis on the relevancy to clinical radiology. This study found that whereas AI is showing continual improvement in radiology, AI alone does not surpass the effectiveness of a radiologist. Additionally, it was found that there are multiple variations on how AI should be integrated with a radiologist's workflow.

Empowering breast cancer diagnosis and radiology practice: advances in artificial intelligence for contrast-enhanced mammography.

Artificial intelligence (AI) applications in breast imaging span a wide range of tasks including decision support, risk assessment, patient management, quality assessment, treatment response assessment and image enhancement. However, their integration into the clinical workflow has been slow due to the lack of a consensus on data quality, benchmarked robust implementation, and consensus-based guidelines to ensure standardization and generalization. Contrast-enhanced mammography (CEM) has improved sensitivity and specificity compared to current standards of breast cancer diagnostic imaging i.e., mammography (MG) and/or conventional ultrasound (US), with comparable accuracy to MRI (current diagnostic imaging benchmark), but at a much lower cost and higher throughput. This makes CEM an excellent tool for widespread breast lesion characterization for all women, including underserved and minority women. Underlining the critical need for early detection and accurate diagnosis of breast cancer, this review examines the limitations of conventional approaches and reveals how AI can help overcome them. The Methodical approaches, such as image processing, feature extraction, quantitative analysis, lesion classification, lesion segmentation, integration with clinical data, early detection, and screening support have been carefully analysed in recent studies addressing breast cancer detection and diagnosis. Recent guidelines described by Checklist for Artificial Intelligence in Medical Imaging (CLAIM) to establish a robust framework for rigorous evaluation and surveying has inspired the current review criteria.