Removing microplastics from wastewater using leading-edge treatment technologies: a solution to microplastic pollution-a review.

Microplastics (MPs) in environmental studies have revealed that public sewage treatment plants are a common pathway for microplastics to reach local surroundings. Microplastics are becoming more of a worry, posing a danger to both marine wildlife and humans. These plastic items not only contribute to the macrocosmic proliferation of plastics but also the scattering of microplastics and the concentration of other micropollutant-containing objects, increasing the number of pollutants identified. Microplastics' behavior, movement, transformation, and persistence mechanisms, as well as their mode of action in various wastewater effluent treatment procedures, are still unknown. They are making microplastics made from wastewater a big deal. We know that microplastics enter wastewater treatment facilities (WWTPs), that wastewater is released into the atmosphere, and that this wastewater has been considered to represent a threat to habitats and ground character based on our literature assessment. The basic methods of wastewater and sewage sludge, as well as the treatment procedure and early characterization, are covered throughout the dissection of the problematic scientific conceptualization.

Gene expressing analysis indicates the role of Pyrogallol as a novel antibiofilm and antivirulence agent against Acinetobacter baumannii.

Acinetobacter baumannii has emerged worldwide as a leading cause of hospital-acquired infections. Although A. baumannii was initially regarded to as a low-grade pathogen, evidence has been accumulated suggesting that A. baumannii infections are associated with increased mortality in critically ill patients. Here, we describe the efficacy of pyrogallol, a polyphenolic organic compound found in the galls and barks of various trees, which shows anti-biofilm and anti-virulence potential against A. baumannii. Pyrogallol shows concentration-based biofilm inhibition, as evidenced through light and confocal laser scanning microscopic analysis. The other virulence factors are protease, swarming motility, and extracellular polymeric substances that are also inhibited by pyrogallol. Through real-time PCR, it was found that pyrogallol downregulates expression of the biofilm and virulence-related ompA, bap, csuA/B, katE, pgaA, and pgaC genes. Furthermore, pyrogallol moderately inhibited the mature biofilms of A. baumannii in a concentration-dependent manner (5, 10, and 20 µg/ml). The present study reports that the anti-biofilm and anti-virulence potential of pyrogallol disrupts the biofilm formation, adherence of cells, and cell-to-cell signaling mechanism of A. baumannii. Thus, pyrogallol is a promising therapeutic agent for A. baumannii-related infections.

Antibacterial activity of silver nanoparticle-coated fabric and leather against odor and skin infection causing bacteria.

We present a simple, eco-friendly synthesis of silver and gold nanoparticles using a natural polymer pine gum solution as the reducing and capping agent. The pine gum solution was combined with silver nitrate (AgNO3) or a chloroauric acid (HAuCl4) solution to produce silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), respectively. The reaction process was simple; formation of the nanoparticles was achieved by autoclaving the silver and gold ions with the pine gum. UV-Vis spectra showed surface plasmon resonance (SPR) for silver and gold nanoparticles at 432 and 539 nm, respectively. The elemental forms of AgNPs and AuNPs were confirmed by energy-dispersive X-ray spectroscopy (EDX). Fourier transform infrared spectroscopy (FTIR) showed the biomolecules present in the pine gum, AgNPs, and AuNPs. Transmission electron microscopy (TEM) images showed the shape and size of AgNPs and AuNPs. The crystalline nature of synthesized AgNPs and AuNPs was confirmed by X-ray crystallography [X-ray diffraction (XRD)]. Application of synthesized AgNPs onto cotton fabrics and leather, in order to evaluate their antibacterial properties against odor- or skin infection-causing bacteria, is also discussed. Among the four tested bacteria, AgNP-coated cotton fabric and leather samples displayed excellent antibacterial activity against Brevibacterium linens.

Biosynthesis of silver nanoparticles using Bacillus subtilis EWP-46 cell-free extract and evaluation of its antibacterial activity.

This study highlights the ability of nitrate-reducing Bacillus subtilis EWP-46 cell-free extract used for preparation of silver nanoparticles (AgNPs) by reduction of silver ions into nano silver. The production of AgNPs was optimized with several parameters such as hydrogen ion concentration, temperature, silver ion (Ag(+) ion) and time. The maximum AgNPs production was achieved at pH 10.0, temperature 60 °C, 1.0 mM Ag(+) ion and 720 min. The UV-Vis spectrum showed surface plasmon resonance peak at 420 nm, energy-dispersive X-ray spectroscopy (SEM-EDX) spectra showed the presence of element silver in pure form. Atomic force microscopy (AFM) and transmission electron microscopy images illustrated the nanoparticle size, shape, and average particle size ranging from 10 to 20 nm. Fourier transform infrared spectroscopy provided the evidence for the presence of biomolecules responsible for the reduction of silver ion, and X-ray diffraction analysis confirmed that the obtained nanoparticles were in crystalline form. SDS-PAGE was performed to identify the proteins and its molecular mass in the purified nitrate reductase from the cell-free extract. In addition, the minimum inhibitory concentration and minimum bactericidal concentration of AgNPs were investigated against gram-negative (Pseudomonas fluorescens) and gram-positive (Staphylococcus aureus) bacteria.

Green synthesis of silver and gold nanoparticles using Zingiber officinale root extract and antibacterial activity of silver nanoparticles against food pathogens.

In the present study, we synthesized silver and gold nanoparticles with a particle size of 10-20 nm, using Zingiber officinale root extract as a reducing and capping agent. Chloroauric acid (HAuCl4) and silver nitrate (AgNO3) were mixed with Z. officinale root extract for the production of silver (AgNPs) and gold nanoparticles (AuNPs). The surface plasmon absorbance spectra of AgNPs and AuNPs were observed at 436-531 nm, respectively. Optimum nanoparticle production was achieved at pH 8 and 9, 1 mM metal ion, a reaction temperature 50 °C and reaction time of 150-180 min for AgNPs and AuNPs, respectively. An energy-dispersive X-ray spectroscopy (SEM-EDS) study provides proof for the purity of AgNPs and AuNPs. Transmission electron microscopy images show the diameter of well-dispersed AgNPs (10-20 nm) and AuNPs (5-20 nm). The nanocrystalline phase of Ag and Au with FCC crystal structures have been confirmed by X-ray diffraction analysis. Fourier transform infrared spectroscopy analysis shows the respective peaks for the potential biomolecules in the ginger rhizome extract, which are responsible for the reduction in metal ions and synthesized AgNPs and AuNPs. In addition, the synthesized AgNPs showed a moderate antibacterial activity against bacterial food pathogens.

Pseudomonas fluorescens JH 70-4 promotes pb stabilization and early seedling growth of sudan grass in contaminated mining site soil.

A bacterial strain (JH 70-4) exhibiting plant growth promoting characteristics (indoleacetic acid production and 1-aminocyclopropane-1-carboxylate deaminase activity), as well as heavy metal(loid) (HM) tolerance and Pb precipitation, was isolated from HM-contaminated soil at an abandoned mine site. The bacterium was identified as Pseudomonas fluorescens based on 16S rDNA sequencing. The JH 70-4 strain induced precipitation of Pb as PbS nanoparticles, confirmed by X-ray diffraction. Solution pH, incubation time, and Pb concentration influenced removal and PbS formation. Inoculating contaminated soil with JH 70-4 decreased Pb availability; exchangeable Pb decreased while organic- and sulphide-bound Pb increased. The toxicity characteristic leaching procedure showed a 65% decrease in Pb in leachate 60 d after inoculating soil with JH 70-4. Shoot and root lengths of Sudan grass grown in the inoculated soil were greater than in the uninoculated soil. Findings suggest that microbial Pb fixation is a viable strategy for remediating soil and promoting plant growth for phytostabilization of contaminated sites.

Synthesis of silver and gold nanoparticles using cashew nut shell liquid and its antibacterial activity against fish pathogens.

This study reveals a green process for the production of multi-morphological silver (Ag NPs) and gold (Au NPs) nanoparticles, synthesized using an agro-industrial residue cashew nut shell liquid. Aqueous solutions of Ag(+) ions for silver and chloroaurate ions for gold were treated with cashew nut shell extract for the formation of Ag and Au NPs. The nano metallic dispersions were characterized by measuring the surface plasmon absorbance at 440 and 546 nm for Ag and Au NPs. Transmission electron microscopy showed the formation of nanoparticles in the range of 5-20 nm for silver and gold with assorted morphologies such as round, triangular, spherical and irregular. Scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction analyses of the freeze-dried powder confirmed the formation of metallic Ag and Au NPs in crystalline form. Further analysis by Fourier transform infrared spectroscopy provided evidence for the presence of various biomolecules, which might be responsible for the reduction of silver and gold ions. The obtained Ag and Au NPs had significant antibacterial activity, minimum inhibitory concentration and minimum bactericidal concentration on bacteria associated with fish diseases.

Enhanced applications in dentistry through autoclave-assisted sonochemical synthesis of Pb/Ag/Cu trimetallic nanocomposites.

In recent years, researchers have increasingly focused on the development of multiphase trimetallic nanocomposites (TMNC) incorporating ternary metals or metal oxides, which hold significant potential as alternatives for combatting biofilms and bacterial infections. Enhanced oral health is ensured by the innovative techniques used to effectively prevent bacterial adherence and formation of biofilm on dental sutures. In this investigation, TMNC, which consists of Pb, Ag, and Cu, was synthesized using an autoclave-assisted sonochemical technique. Following synthesis, TMNC were characterized using FTIR, XRD, BET, XPS, TGA, and Raman spectroscopy to analyze their shape and microstructure. Subsequent evaluations, including MTT assay, antibacterial activity testing, and biofilm formation analysis, were conducted to assess the efficiency of the synthesized TMNC. Cytotoxicity and anti-human oral squamous cell carcinoma activities of TMNC were evaluated using the Human Oral Cancer cell line (KB) cell line through MTT assay, demonstrating a dose-dependent increase in anti-human oral squamous cell carcinoma activity against the KB cell line compared to the normal cell line, resulting in notably high cell viability. Furthermore, an ultrasonic probe was employed to incorporate TMNC onto dental suturing threads, with different concentrations of TMNC, ultrasonic power levels, and durations considered to determine optimal embedding conditions that result in the highest antibacterial activity. The inhibitory effects of TMNC, both in well diffusion assays and when incorporated into dental suturing threads, against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria on Mueller-Hinton agar (MHA) were assessed using various concentrations of TMNC. The results of the study indicated that the efficacy of TMNC in inhibiting bacterial growth on dental suturing threads remained impressive, even at low concentrations. Moreover, an evaluation of their potential to destabilize biofilms formed by S. aureus and E. coli, the two pathogens in humans, indicated that TMNC would be a promising anti-biofilm agent.

The effect of porcelain filler particulates madar fiber reinforced epoxy composite - A comprehensive study for biomedical applications.

Environmental consciousness motivates scientists to devise an alternative method for producing natural fiber composite materials in order to decrease the demand for synthetic fibers. This study explores the potential of a novel composite material derived from madar fiber-reinforced epoxy with porcelain filler particulates, designed specifically for biomedical instrumentation applications. The primary focus is to assess the material's structural, mechanical, and antibacterial properties. X-ray Diffraction analysis was employed to discern the crystalline nature of the composite, revealing enhanced crystallinity due to the inclusion of porcelain particulates. Fourier-Transform Infrared Spectroscopy confirmed the chemical interactions and bonding mechanisms between madar fiber, epoxy matrix, and porcelain filler. Mechanically, the composite exhibited superior properties when addition of porcelain fillers, maximum results obtain in tensile strength of 51.28 MPa, flexural strength of 54.21 MPa, and impact strength of 0.0155 kJ/m2, making it ideal for robust biomedical applications. Scanning Electron Microscopy provided detailed insights into the morphology and distribution of the reinforcing agents within the epoxy matrix, emphasizing the fibrillated structure of madar fiber and the uniform dispersion of porcelain particulates. Importantly, antibacterial assays demonstrated the composite's potential resistance against common pathogenic bacteria, which is crucial for biomedical instrumentation. Collectively, this research underscores the promising attributes of the madar fiber reinforced epoxy composite with porcelain particulates, suggesting its suitability for advanced biomedical applications.

Pine cone-mediated green synthesis of silver nanoparticles and their antibacterial activity against agricultural pathogens.

The medicinal and physicochemical properties of nanoscale materials are strong functions of the particle size and the materials used in their synthesis. The nanoparticle shape also contributes significantly to their medicinal properties. Several shapes ranging from oval, spherical, rods, to teardrop structures may be obtained by chemical methods. Triangular and hexagonal nanoparticles have been synthesized by using a pine cone extract (PCE). Here, we report the discovery that PCE, when reacted with silver nitrate ions, yields a high percentage of thin, flat, single-crystalline nanohexagonal and nanotriangular silver nanoparticles. The nanohexagonal and nanotriangular nanoparticles appear to grow by a process involving rapid reduction with assembly at room temperature at a high pH. The nanoparticles were characterized by UV­Vis absorption spectroscopy, SEM-EDS, TEM, FTIR, and X-ray diffraction analyses. The anisotropy of the nanoparticle shape results in large near-infrared absorption by the particles. Highly anisotropic particles are applicable in various fields, including agriculture and medicine. The obtained silver nanoparticles (Ag NPs) had significant antibacterial action on both Gram classes of bacteria associated with agriculture. Because the Ag NPs are encapsulated with functional group-rich PCE, they can be easily integrated in various applications.

An eco-friendly ultrasound approach to extracting yellow dye from Cassia alata flower petals: Characterization, dyeing, and antibacterial properties.

Using natural dyes in dyeing industries becomes an alternative to synthetic dyes, which are known to contain harmful chemicals that can pose risks to the environment and human health. This study involves the extraction of yellow dye from Cassia alata flower petals, optimization of the extraction process using an ultrasonic bath (40 KHz and an input power of 500), ultrasonic probe (390 W, 455 W, 520 W, 585 W, and 650 W), and conventional heating (heating mantle with 30 °C, 40 °C, 50 °C, 60 °C, and 70 °C), characterization of the dye, as well as dyeing (cotton, silk, and leather) without using a mordant. The extracted yellow dye was further evaluated to determine its antibacterial activity against skin bacteria. Dye extraction optimization using UV-Visible spectrophotometric analysis revealed that the maximum yellow color in methanol extract (287 and 479 nm) was obtained at 50 °C for 45 min using ultrasonic water bath extraction, followed by the ultrasonic probe and direct heating. Based on the FTIR spectra, it is evident that OH is present at approximately 3300 cm-1, while CH stretches at around 2900 cm-1. A characteristic peak at 1608 cm-1 bears a striking similarity to anthraquinonoid-based compounds. Also, using the ultrasonic water bath dyeing technique at 50 °C for 45 min, the yellow color of cotton, silk, and leather was dyed optimally. Due to effective color removal after two washings with boiling soap liquid, the dyed cotton and silk fabric displayed good washing and rubbing fastness. Regarding antibacterial activity, the dye was highly active against all pathogens after extraction in methanol. The maximum inhibition was observed against Pseudomonas sp. with a MIC value of 1.56 mg/ml.

Interleukin-10 as Covid-19 biomarker targeting KSK and its analogues: Integrated network pharmacology.

COVID-19 caused by the SARS-CoV-2 virus is widespread in all regions, and it disturbs host immune system functioning leading to extreme inflammatory reaction and hyperactivation of the immune response. Kabasura Kudineer (KSK) is preventive medicine against viral infections and a potent immune booster for inflammation-related diseases. We hypothesize that KSK and KSK similar plant compounds, might prevent or control the COVID-19 infection in the human body. 1,207 KSK and KSK similar compounds were listed and screened via the Swiss ADME tool and PAINS Remover; 303 compounds were filtered including active and similar drug compounds. The targets were retrieved from similar drugs of the active compounds of KSK. Finally, 573 genes were listed after several screening steps. Next, network analysis was performed to finalize the potential target gene: construction of protein-protein interaction of 573 genes using STRING, identifying top hub genes in Cytoscape plug-ins (MCODE and cytoHubba). These ten hub genes play a crucial role in the inflammatory response. Target-miRNA interaction was also constructed using the miRNet tool to interpret miRNAs of the target genes and their functions. Functional annotation was done via DAVID to gain a complete insight into the mechanism of the enriched pathways and other diseases related to the given target genes. In Molecular Docking analysis, IL10 attained top rank in Target-miRNA interaction and also the gene formed prominent exchanges with an excellent binding score (> = -8.0) against 19 compounds. Among them, Guggulsterone has an acute affinity score of -8.8 for IL10 and exhibits anti-inflammatory and immunomodulatory properties. Molecular Dynamics simulation study also performed for IL10 and the interacting ligand compounds using GROMACS. Finally, Guggulsterone will be recommended to enhance immunity against several inflammatory diseases, including COVID19.

Phage in cancer treatment - Biology of therapeutic phage and screening of tumor targeting peptide.

INTRODUCTION: There is a constant drive to improve disease treatments. Much effort has been directed at identifying less immunogenic anti-cancer agents that produce fewer and less severe side effects. For more than a decade, bacteriophages have been discussed as an effective treatment for cancer with an exact mode of delivery. AREAS COVERED: We review how bacteriophages are used in cancer treatment, the underlying therapeutic mechanisms, and the tumor attacking peptide screening process. The filamentous bacteriophages are an effective vehicle for delivering displayed peptides toward the tumor target. The peptide must be expressed at the appropriate coat protein, and the peptide must be effective enough to disrupt the complex cancer matrix. The present review also sheds light on the dynamic use of phage in cancer treatment, from detection and diagnostics to treatment. EXPERT OPINION: Phage has a versatile role as a diagnostic and therapeutic tool. By acting as an appropriate recombinant drug, this phage has every potential to replace existing laborious, high capital investing therapies that may at many times result in failure or drastic side effects. One of the most significant challenges would be identifying tumor homing peptides. Although a few have been discovered, the most effective ones are yet to be determined. This therapeutic method plays a significant role in tumor therapy with high accuracy and efficiency, irrespective of the target location.

Potential Bioactive Compounds from Marine Streptomyces sp. and Their In Vitro Antibiofilm and Antibacterial Activities Against Antimicrobial-Resistant Clinical Pathogens.

Antimicrobial resistance issues have risen dramatically in recent years, posing a severe concern to humans worldwide. The urgent need to find novel compounds for pharmaceutical applications prompts the research of under-explored environments such as marine ecosystems. The present study was designed to discover novel secondary metabolites, and we have isolated about 30 actinomycetes from the marine soil samples collected in Thondi (Ramanathapuram, Tamil Nadu, India), where most isolates are associated with the genus Streptomyces. Out of 30, one potentially active strain (Streptomyces sp. SRMA3) was identified using primary and secondary screening methods against the drug-resistant clinical pathogens. The active metabolites extracted from the selected active isolate were subjected to partial purification and characterization using Fourier transform infrared spectrophotometer (FTIR) and gas chromatography-mass spectroscopy (GC-MS) analysis. The minimum inhibitory concentration (MIC) value was determined for the active metabolite. Further, the partially purified active fraction was revealed for its antibacterial and antibiofilm activity against drug-resistant clinical pathogens. Light and fluorescence microscopy detected the viability and adhesion of the biofilm-forming drug-resistant pathogens. Growth curve analysis showed that the active metabolite has the potential to inhibit drug-resistant pathogens. The synergistic effect of active metabolite with commercial antibiotics also revealed that it could enhance the activity of antibiotics in antimicrobial resistance pathogens. This study shows that the isolated Streptomyces sp. SRMA3 is a potentially active strain, and the metabolite derived from this strain has a good antibacterial and antibiofilm activity against antimicrobially resistant clinical pathogens and could be used for various biotechnological applications.

Investigating Influences of Synthesizing Eco-Friendly Waste-Coir-Fiber Nanofiller-Based Ramie and Abaca Natural Fiber Composite Parameters on Mechanical Properties.

Clean technology-based natural fiber composite fabrication is the prime aim of this piece of research. Natural fibers highly replace metal usage in industries and automobile, marine, medical applications, and so on. Vast amounts of natural fibers are freely available in all areas. In this research, work nanofiller material such as nano form waste coir fiber is collected from used car seat. The 10 wt.% of nanofiller material is added to the preparation of natural nanocomposites (ramie and abaca fiber). Hybrid composites are fabricated with the influence of different process parameters, namely, fiber weight percentage (20 wt.%, 30 wt.%, 40 wt.%, and 50 wt.%), NaOH action % (4%, 6%, 8%, and 10%), compression pressure (9 MPa, 12 MPa, 15 MPa, and 18 MPa), and temperature (100°C, 120°C, 140°C, and 160°C). Furthermore, the strength of this hybrid composite has analyzed by conducting flexural, impact, and shore hardness tests. These tests have provided the influence of selected parameters and their effects on the results of experimental work. In the flexural analysis, 6% of NaOH action has offered maximum flexural strength of the specimens. Correspondingly in the impact test, 30 wt.% of fiber is produced higher impact strength. Finally, applying 15 Mpa of compression pressure records the maximum shore hardness.

Evaluation of MWCNT Particles-Reinforced Magnesium Composite for Mechanical and Catalytic Applications.

Aluminum, magnesium, and copper materials must have increased mechanical strength with enhanced wear and corrosion resistance. Substantial research focused on reinforcing hard particles into low-strength materials using stir casting or powder metallurgy. This work is intended to develop the magnesium hybrid matrix with the dispersion of boron carbide (B4C) and multiwall carbon nanotubes (MWCNTs). Hybrid magnesium composites are prepared, although the powder metallurgy route considers different process parameters. Statistical analysis such as Taguchi L16 orthogonal array is involved in this work. It is used to find the magnesium hybrid samples' minimum and maximum wear, corrosion, and microhardness levels. Powder metallurgy parameters are B4C (3%, 6%, 9%, and 12%), MWCNT (0.2%, 0.4%, 0.6%, and 0.8%), ball milling (1, 2, 3, and 4 h), and sintering (3, 4, 5, and 6 h). The ball milling parameters are extremely influenced in the wear test analysis. Minimum wear losses are obtained as 0.008 g by influencing the 4 h ball milling process. Similarly, 3 h of sintering time offered a minimum corrosion rate of 0.00078 mm/yr. In microhardness analysis, the percentage of MWCNTs is highly implicated in narrow hardness resulting in the hardness value of 181. The hardness value is recorded using 0.2% MWCNTs in the magnesium alloy AZ80.

Oxytetracycline Degrading Potential of Lysinibacillus sp. Strain 3+I Isolated from Poultry Manure.

Oxytetracycline (OTC) which is a broad-spectrum veterinary tetracycline antibiotic is extensively used in poultry farms as a prophylactic, therapeutic, and growth stimulator. Upon administration, unmetabolized OTC is excreted from the animal body through droppings and accumulated in litter in the poultry industry. This study aimed at investigating the OTC degradation potential of an-OTC tolerant bacterial strain, isolated from poultry manure. The isolated strain's morphology, biochemical properties, and 16S ribosomal RNA (rRNA) gene sequence confirmed that it belonged to the Lysinibacillus genus. To measure the residual OTC concentration, a high-performance liquid chromatography method was used. OTC degradation rates were 2.579 mg L-1d-1 with Lysinibacillus strain 3+I and 1.149 mg L-1d-1 without Lysinibacillus strain 3+I. In the presence of strain 3+I, the half-life significantly reduced to 2.68 days, compared to 6.03 days without strain 3+I. The strain demonstrated 85% removal with the OTC concentration of 10 µg/ml. The influence of pH, temperature, carbon sources, and nitrogen source, which influence degradation, were also investigated. The optimum condition favouring degradation was pH 6 at a temperature of 30°C. In addition, Lysinibacillus sp. strain 3+I's ability to degrade OTC in poultry litter offers a promising approach to treat poultry manure and effluent containing OTC, preventing its contamination in the environment.

Efficient One-Pot Synthesis of TiO2/ZrO2/SiO2 Ternary Nanocomposites Using Prunus × Yedoensis Leaf Extract for Enhanced Photocatalytic Dye Degradation.

A simple, efficient, and ecofriendly method was employed to synthesize TiO2/ZrO2/SiO2 ternary nanocomposites using Prunus × yedoensis leaf extract (PYLE) that shows improved photocatalytic and antibacterial properties. The characterization of the obtained nanocomposites was done by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopic (EDS) analysis. The synthesized ternary nanocomposites with nanoscale pore diameters were investigated for the elimination of Reactive Red 120 (RR120) dye. The obtained results showed about 96.2% removal of RR120 dye from aqueous solution under sunlight irradiation. Furthermore, it shows promising antibacterial activity against Staphylococcus aureus and Escherichia coli. The improved photocatalytic and antibacterial activity of TiO2/ZrO2/SiO2 may bring unique insights into the production of ternary nanocomposites and their applications in the environment and biomedical field.

Biomedical and Textile Applications of Alternanthera sessilis Leaf Extract Mediated Synthesis of Colloidal Silver Nanoparticle.

The aqueous extract of Alternanthera sessilis (As) acts as the precursors for the quick reduction of silver ions, which leads to the formation of silver nanoparticles. In the agar, well diffusion method of the Klebsiella pneumoniae shows the minimal inhibitory concentration of 12 mm against A. sessilis mediated silver nanoparticles (As-AgNPs) at 60 µg/mL concentration. Fabric treated with novel AS-AgNPs is tested against the K. pneumoniae and shows an inhibitory action of 12 mm with mixed cotton that determines the antimicrobial efficacy of the fabrics. Uv- visible spectrophotometer was performed, showing a surface plasmon resonance peak at 450 nm cm-1. FTIR shows the vibration and the infrared radiation at a specific wavelength of 500-4000 cm-1. The HR-TEM analysis showed the presence of black-white crystalline, spherical-shaped As-AgNPs embedded on the fabrics range of 15 nm-40 nm. In the scanning electron microscope, the presence of small ball-shaped As-AgNPs embedded on the fabrics at a voltage of 30 KV was found with a magnification of 578X. EDAX was performed in which the nanoparticles show a peak of 2.6-3.9 KeV, and it also reveals the presence of the composition, distribution, and elemental mapping of the nanoparticles. The cytotoxic activity of synthesized nanosilver was carried out against L929 cell lines, which show cell viability at a concentration of 2.5 µg mL-1. Cell proliferation assay shows no cytotoxicity against L929 cell lines for 24 h. In this study, the green synthesis of silver nanoparticles from A. sessilis appears to be a cheap, eco-friendly, and alternative approach for curing infectious ulcers on the floor of the stratum corneum. Nanotechnology conjoined with herbal therapeutics provides a promising solution for wound management.

Synthesis and Workability Behavior of Cu-X wt.% TiC (x = 0, 4, 8, and 12) Powder Metallurgy Composites.

In this work, copper (Cu) matrix composite reinforced with titanium carbide (TiC) was fabricated by powder metallurgy (PM) method with the varying TiC content from 0% to 12% by weight in the step of 4%. The required weight percentage of powders was milled in an indigenously developed ball milling setup. Green compacts were made using a computer-controlled hydraulic press (400 kN) and sintered in a muffle furnace at a temperature of 950°C. Scanning electron microscope (SEM) was used to analyze the distribution of TiC particles in Cu matrix in as-sintered conditions. X-ray diffraction (XRD) analysis resulted in the existence of respective phases in the produced composites. The structural characteristics such as stress, strain, dislocation density, and grain size of the milled composites were evaluated. Cold upsetting was conducted for the sintered composites at room temperature to evaluate the axial (σ z ), hoop (σ Ó© ), hydrostatic (σ m ), and effective (σ eff ) true stresses. These stresses were analyzed against true axial strain (ε z ). Results showed that the increase in the inclusion of weight percentage of TiC into the Cu matrix increases density, hardness, (σ z ), (σ Ó© ), (σ m ), (σ eff ), and stress ratio parameters such as (σ z /σ eff ), (σ θ /σ eff ), (σ m /σ eff ), and (σ z /σ θ ) of the composites.