Selective ionization of oxidized lipid species using different solvent additives in flow injection mass spectrometry.

Lipid oxidation in food products is a crucial problem that causes undesirable changes in the food's flavor, texture, and nutritional value. It should be carefully monitored as it can lead to the formation of potentially toxic compounds and in that way reduce the shelf life of the product. Liquid chromatography coupled to mass spectrometry is a powerful tool to monitor the formation of oxidized lipids. However, the presence of lipid species in both their non-oxidized and oxidized forms at distinctly different concentrations can hinder the detection and identification of the less abundant oxidized species, due to coelution. In this study, a flow injection mass spectrometry approach was used to selectively ionize oxidized triacylglycerols versus their non-oxidized precursors. Three mobile phase additives were investigated (ammonium formate, sodium acetate, and sodium iodide) at three different concentrations, and ion source settings (i.e., sheath gas temperature, capillary voltage, and nozzle voltage) were optimized. A fractional factorial design was conducted to examine not only the direct effect of the operating parameters on the selectivity of ionization for the oxidized lipid species, but also to assess their combined effect. Overall, selective ionization of oxidized versus non-oxidized lipid species was favored by the use of sodium-containing solvent additives. The application of specific ion source settings resulted in an increased ionization selectivity, with sheath gas temperature and capillary voltage having the most significant influence. A selectivity factor as high as 120 could be reached by combining 0.1 mg/mL sodium-containing additives, with 250 °C sheath gas temperature and 5000 V capillary voltage. These findings will contribute to future studies on fast detection and relative quantification of low abundant oxidized triacylglycerols and their possible impact on human health.

Versatile ferrous oxidation-xylenol orange assay for high-throughput screening of lipoxygenase activity.

Lipoxygenases (LOXs) catalyze dioxygenation of polyunsaturated fatty acids (PUFAs) into fatty acid hydroperoxides (FAHPs), which can be further transformed into a number of value-added compounds. LOXs have garnered interest as biocatalysts for various industrial applications. Therefore, a high-throughput LOX activity assay is essential to evaluate their performance under different conditions. This study aimed to enhance the suitability of the ferrous-oxidized xylenol orange (FOX) assay for screening LOX activity across a wide pH range with different PUFAs. The narrow linear detection range of the standard FOX assay restricts its utility in screening LOX activity. To address this, the concentration of perchloric acid in the xylenol orange reagent was adjusted. The modified assay exhibited a fivefold expansion in the linear detection range for hydroperoxides and accommodated samples with pH values ranging from 3 to 10. The assay could quantify various hydroperoxide species, indicating its applicability in assessing LOX substrate preferences. Due to sensitivity to pH, buffer types, and hydroperoxide species, the assay required calibration using the respective standard compound diluted in the same buffer as the measured sample. The use of correction factors is suggested when financial constraints limit the use of FAHP standard compounds in routine LOX substrate preference analysis. FAHP quantification by the modified FOX assay aligned well with results obtained using the commonly used conjugated diene method, while offering a quicker and broader sample pH range assessment. Thus, the modified FOX assay can be used as a reliable high-throughput screening method for determining LOX activity. KEY POINTS: • Modifying perchloric acid level in FOX reagent expands its linear detection range • The modified FOX assay is applicable for screening LOX activity in a wide pH range • The modified FOX assay effectively assesses substrate specificity of LOX.

Prenylation of aromatic amino acids and plant phenolics by an aromatic prenyltransferase from Rasamsonia emersonii.

Dimethylallyl tryptophan synthases (DMATSs) are aromatic prenyltransferases that catalyze the transfer of a prenyl moiety from a donor to an aromatic acceptor during the biosynthesis of microbial secondary metabolites. Due to their broad substrate scope, DMATSs are anticipated as biotechnological tools for producing bioactive prenylated aromatic compounds. Our study explored the substrate scope and product profile of a recombinant RePT, a novel DMATS from the thermophilic fungus Rasamsonia emersonii. Among a variety of aromatic substrates, RePT showed the highest substrate conversion for L-tryptophan and L-tyrosine (> 90%), yielding two mono-prenylated products in both cases. Nine phenolics from diverse phenolic subclasses were notably converted (> 10%), of which the stilbenes oxyresveratrol, piceatannol, pinostilbene, and resveratrol were the best acceptors (37-55% conversion). The position of prenylation was determined using NMR spectroscopy or annotated using MS2 fragmentation patterns, demonstrating that RePT mainly catalyzed mono-O-prenylation on the hydroxylated aromatic substrates. On L-tryptophan, a non-hydroxylated substrate, it preferentially catalyzed C7 prenylation with reverse N1 prenylation as a secondary reaction. Moreover, RePT also possessed substrate-dependent organic solvent tolerance in the presence of 20% (v/v) methanol or DMSO, where a significant conversion (> 90%) was maintained. Our study demonstrates the potential of RePT as a biocatalyst for the production of bioactive prenylated aromatic amino acids, stilbenes, and various phenolic compounds. KEY POINTS: • RePT catalyzes prenylation of diverse aromatic substrates. • RePT enables O-prenylation of phenolics, especially stilbenes. • The novel RePT remains active in 20% methanol or DMSO.

Towards absolute quantification of protein genetic variants in Pisum sativum extracts.

In recent years, several studies have used proteomics approaches to characterize genetic variant profiles of agricultural raw materials. In such studies, the challenge is the quantification of the individual protein variants. In this study a novel UPLC-PDA-MS method with absolute and label-free UV-based peptide quantification was applied to quantify the genetic variants of legumin, vicilin and albumins in pea extracts. The aim was to investigate the applicability of this method and to identify challenges in determining protein concentration from the measured peptide concentrations. Analysis of the protein mass balance showed significant losses of proteins in extraction (37%) and of peptides in further sample preparation (69%). The challenge in calculating the extractable individual protein concentrations was how to deal with these insoluble peptides. The quantification approach using average amino acid concentrations in each position of the sequence showed most reproducible results and allowed comparison of the genetic protein composition of 8 different cultivars. The extractable protein composition (µM/µM) was remarkably similar for all cultivar extracts and consisted of legumins A1 (12.8 ± 1.2%), A2 (1.1 ± 0.4%), B (9.9 ± 1.6%), J (7.5 ± 1.0%) and K (10.3 ± 2.1%), vicilin (15.2 ± 1.7%), provicilin (15.7 ± 2.5%), convicilin (9.8 ± 0.8%), albumin A1 (7.4 ± 2.0%), albumin 2 (10.0 ± 1.5%) and protease inhibitor (0.4 ± 0.4%).

Transition metal cations catalyze 16O/18O exchange of catechol motifs with H218O.

Catechol motifs are ubiquitous in nature, as part of plant, animal and microbial metabolites, and are known to form complexes with various metal cations. Here, we report for the first time that complexation with transition metal cations, especially Fe(III), results in rapid 16O/18O exchange of the catecholic hydroxyl groups with H218O. We discuss the implications of this finding for mechanistic studies using H218O and potential relevance for production of 18O-labeled catechol derivatives.

Facile Amidation of Non-Protected Hydroxycinnamic Acids for the Synthesis of Natural Phenol Amides.

Phenol amides are bioactive compounds naturally present in many plants. This class of compounds is known for antioxidant, anti-inflammatory, and anticancer activities. To better understand the reactivity and structure-bioactivity relationships of phenol amides, a large set of structurally diverse pure compounds are needed, however purification from plants is inefficient and laborious. Existing syntheses require multiple steps, including protection of functional groups and are generally overly complicated and only suitable for specific combinations of hydroxycinnamic acid and amine. Thus, to facilitate further studies on these promising compounds, we aimed to develop a facile general synthetic route to obtain phenol amides with a wide structural diversity. The result is a protocol for straightforward one-pot synthesis of phenol amides at room temperature within 25 h using equimolar amounts of N,N'-dicyclohexylcarbodiimide (DCC), amine, hydroxycinnamic acid, and sodium bicarbonate in aqueous acetone. Eight structurally diverse phenol amides were synthesized and fully chemically characterized. The facile synthetic route described in this work is suitable for a wide variety of biologically relevant phenol amides, consisting of different hydroxycinnamic acid subunits (coumaric acid, ferulic acid, and sinapic acid) and amine subunits (agmatine, anthranilic acid, putrescine, serotonin, tyramine, and tryptamine) with yields ranging between 14% and 24%.

Toward a Systematic Nomenclature for (Neo)Lignanamides.

Phenylalkenoic acid amides, often referred to as phenol amides or hydroxycinnamic acid amides, are bioactive phytochemicals, whose bioactivity can be enhanced by coupling to form dimers or oligomers. Phenylalkenoic acid amides consist of a (hydroxy)cinnamic acid derivative (i.e., the phenylalkenoic acid subunit) linked to an amine-containing compound (i.e., the amine subunit) via an amide bond. The phenylalkenoic acid moiety can undergo oxidative coupling, either catalyzed by oxidative enzymes or due to autoxidation, which leads to the formation of (neo)lignanamides. Dimers described in the literature are often named after the species in which the compound was first discovered; however, the naming of these compounds lacks a systematic approach. We propose a new nomenclature, inspired by the existing system used for hydroxycinnamic acid dimers and lignin. In the proposed systematic nomenclature for (neo)lignanamides, compound names will be composed of three-letter codes and prefixes denoting the subunits, and numbers that indicate the carbon atoms involved in the linkage between the monomeric precursors. The proposed nomenclature is consistent, future-proof, and systematic.

QSAR of 1,4-benzoxazin-3-one antimicrobials and their drug design perspectives.

Synthetic derivatives of 1,4-benzoxazin-3-ones have been shown to possess promising antimicrobial activity, whereas their natural counterparts were found lacking in this respect. In this work, quantitative structure-activity relationships (QSAR) of natural and synthetic 1,4-benzoxazin-3-ones as antimicrobials were established. Data published in literature were curated into an extensive dataset of 111 compounds. Descriptor selection was performed by a genetic algorithm. QSAR models revealed differences in requirements for activity against fungi, gram-positive and gram-negative bacteria. Shape, VolSurf, and H-bonding property descriptors were frequently picked in all models. The models obtained for gram-positive and gram-negative bacteria showed good predictive power (Q2Ext 0.88 and 0.85, respectively). Based on the models generated, an additional set of 1,4-benzoxazin-3-ones, for which no antimicrobial activity had been determined in literature, were evaluated in silico. Additionally, newly designed lead compounds with a 1,4-benzoxazin-3-one scaffold were generated in silico by varying the positions and combinations of substituents. Two of these were predicted to be up to 5 times more active than any of the compounds in the current dataset. The 1,4-benzoxazin-3-one scaffold was concluded to possess potential for the design of new antimicrobial compounds with potent antibacterial activity, a multitarget mode of action, and possibly reduced susceptibility to gram negatives' efflux pumps.

Laminaria digitata phlorotannins decrease protein degradation and methanogenesis during in vitro ruminal fermentation.

BACKGROUND: Phlorotannins (PhTs) are marine tannins consisting of phloroglucinol subunits connected via carbon-carbon and ether linkages. These have non-covalent protein binding properties and are, therefore, expected to be beneficial in protecting protein from hydrolysis during ruminal fermentation. In this study, the effectiveness of a methanolic PhTs extract from Laminaria digitata (10, 20, 40, 50, 75 and 100 g kg-1 tannin-free grass silage, with or without addition of polyethylene glycol (PEG), was investigated in vitro on protection of dietary protein and reduction of methane (CH4 ) in ruminal fluid. RESULTS: Addition of PhTs had linear (P < 0.0001) and quadratic (P = 0.0003) effects on gas and CH4 production, respectively. Optimal dosage of PhTs was 40 g kg-1 as at this point CH4 decreased (P < 0.0001) from 24.5 to 15.2 mL g-1 organic matter (OM), without affecting gas production (P = 0.3115) and total volatile fatty acids (P = 1.000). Ammonia trended (P = 0.0903) to decrease from 0.49 to 0.39 mmol g-1 OM, indicating protection of protein. Addition of PEG inhibited the effect of tannins at all dosage levels, and none of the fermentation parameters differed from the control. CONCLUSION: PhTs effectively protected protein from fermentation and reduced ruminal methanogenesis. © 2017 Society of Chemical Industry.

A tandem CBM25 domain of α-amylase from Microbacterium aurum as potential tool for targeting proteins to starch granules during starch biosynthesis.

BACKGROUND: Starch-binding domains from carbohydrate binding module family 20 have been used as a tool for starch engineering. Previous studies showed that expression of starch binding domain fusion proteins in planta resulted in modified starch granule structures and physicochemical properties. However, although 13 carbohydrate binding module families have been reported to contain starch-binding domains, only starch-binding domains from carbohydrate binding module family 20 have been well studied and introduced into plants successfully. In this study, two fragments, the tandem CBM25 domain and the tandem CBM25 with multiple fibronectin type III (FN3) domains of the α-amylase enzyme from Microbacterium aurum, were expressed in the tubers of a wild type potato cultivar (cv. Kardal) and an amylose-free (amf) potato mutant. RESULTS: The (CBM25)2 and FN3 protein were successfully accumulated in the starch granules of both Kardal and amf transformants. The accumulation of (CBM25)2 protein did not result in starch morphological alterations in Kardal but gave rise to rough starch granules in amf, while the FN3 resulted in morphological changes of starch granules (helical starch granules in Kardal and rough surface granules in amf) but only at a very low frequency. The starches of the different transformants did not show significant differences in starch size distribution, apparent amylose content, and physico-chemical properties in comparison to that of untransformed controls. CONCLUSION: These results suggest that the starch-binding domains from carbohydrate binding module family 25 can be used as a novel tool for targeting proteins to starch granules during starch biosynthesis without side-effects on starch morphology, composition and properties.

Phlorotannin Composition of Laminaria digitata.

INTRODUCTION: Phlorotannins are complex mixtures of phloroglucinol oligomers connected via C-C (fucols) or C-O-C (phlorethols) linkages. Their uniformity in subunits and large molecular weight hamper their structural analysis. Despite its commercial relevance for alginate extraction, phlorotannins in Laminaria digitata have not been studied. OBJECTIVE: To obtain quantitative and structural information on phlorotannins in a methanolic extract from L. digitata. METHODOLOGY: The combined use of 13 C and 1 H NMR spectroscopy allowed characterisation of linkage types and extract purity. The purity determined was used to calibrate the responses obtained with the colorimetric 2,4-dimethoxybenzaldehyde (DMBA) and Folin-Ciocalteu (FC) assays. Using NP-flash chromatography, phlorotannin fractions separated on oligomer size were obtained and enabled structural and molecular weight characterisation using ESI-MS and MALDI-TOF-MS. RESULTS: The fucol-to-phlorethol linkage ratio was 1:26 and the extract was 60.1% pure, determined by NMR spectroscopy. For DMBA, the response of the extract was 12 times lower than that of phloroglucinol, whereas there was no difference for FC. By accounting for differences in response, the colorimetric assays were applicable for quantification using phloroglucinol as a standard. The phlorotannin content was around 4.5% DM. Fucol- and phlorethol-linkage types were annotated based on characteristic MSn fragmentations. Structural isomers of phlorotannins up to a degree of polymerisation of 18 (DP18) were annotated and identification of several isomers hinted at branched phloroglucinol oligomers. With MALDI-TOF-MS phlorotannins up to DP27 were annotated. CONCLUSION: By combining several analytical techniques, phlorotannins in L. digitata were quantified and characterised with respect to fucol-to-phlorethol linkage ratio, molecular weight (distribution), and occurrence of structural isomers. Copyright © 2017 John Wiley & Sons, Ltd.

A tandem mass spectrometry method based on selected ions detects low-abundance phenolics in black tea - theatridimensins as products of the oxidative cascade.

RATIONALE: Mixtures of phenolics are widespread in plant-derived food products, for instance black tea. Detailed compositional analysis of phenolics present is important for quality control. Characterization of low-abundance compounds often requires extensive purification; hence, the need for rapid screening methods to annotate compounds in complex mixtures without extensive sample preparation. Opportunities of ultra-high performance liquid chromatography/tandem mass spectrometry (UHPLC/MS) as tool in a rapid screening method are discussed for black tea analysis, with the two-step-oxidation product theatridimensin (T3D) as example. METHODS: Three MS screening methods were compared for their ability to tentatively annotate two-step-oxidation products in black teas without the need for prior fractionation: (i) full MS; (ii) tandem mass spectrometry (MS/MS) on selected ions; and (iii) selected reaction monitoring (SRM), in combination with post-analysis extracted ion chromatography. A model system of theaflavin (TF), epicatechin (EC) and tyrosinase was used to prepare the two-step-oxidation product T3D, consisting of three oligomerized catechin subunits. Commercial teas were screened for the occurrence of T3Ds. RESULTS: The MS(2) fragmentation pattern of T3D was compared with that of an isomeric catechin trimer from black tea, TFsEC. MS(2) signature fragments were found to distinguish the two isomers, i.e. m/z 617 for T3D and m/z 563 for TFsEC. The MS screening methods, MS/MS on selected ions and SRM, both enabled monitoring MS(2) data of compounds present in low abundance. The former provided the most complete MS(2) data set, which facilitated the discovery of another isomer, i.e. theaflavate A. T3Ds, TFsECs, and theaflavate A could be tentatively annotated in all tested tea samples. CONCLUSIONS: When exploring black tea for the occurrence of two-step-oxidation products, the use of MS/MS on selected ions combined with extracted ion chromatography proved to be the most suitable. The occurrence of T3Ds and T3Dgs in various black teas was shown for the first time and the 'oxidative cascade hypothesis' was extended with novel oxidation products. Copyright © 2016 John Wiley & Sons, Ltd.

Involvement of a Hydrophobic Pocket and Helix†11 in Determining the Modes of Action of Prenylated Flavonoids and Isoflavonoids in the Human Estrogen Receptor.

Six prenylated (iso)flavonoids were purified from a licorice root extract and subjected to competition experiments with six commercially available (iso)flavonoids. The agonistic and antagonistic activities of these compounds towards both hERα (human estrogen receptor alpha) and hERß were determined. Differences in the modes of action (agonist or antagonist) were observed for the various compounds tested. In general, each compound had the same mode of action towards both ERs. In silico modeling was performed in order to study the differences in estrogenicity observed between the compounds. It is suggested that prenyl chains fit into a hydrophobic pocket present in the hER, resulting in an increased agonistic activity. In addition, it was shown that an increase in length (≈1.7 Å) of pyran prenylated isoflavonoids resulted in an antagonistic mode of action. This might be caused by collision of the pyran ring with helix 11 in the ligand binding cavity of the hER.

Expression of an amylosucrase gene in potato results in larger starch granules with novel properties.

MAIN CONCLUSION: Expression of amylosucrase in potato resulted in larger starch granules with rough surfaces and novel physico-chemical properties, including improved freeze-thaw stability, higher end viscosity, and better enzymatic digestibility. Starch is a very important carbohydrate in many food and non-food applications. In planta modification of starch by genetic engineering has significant economic and environmental benefits as it makes the chemical or physical post-harvest modification obsolete. An amylosucrase from Neisseria polysaccharea fused to a starch-binding domain (SBD) was introduced in two potato genetic backgrounds to synthesize starch granules with altered composition, and thereby to broaden starch applications. Expression of SBD-amylosucrase fusion protein in the amylose-containing potato resulted in starch granules with a rough surface, a twofold increase in median granule size, and altered physico-chemical properties including improved freeze-thaw stability, higher end viscosity, and better enzymatic digestibility. These effects are possibly a result of the physical interaction between amylosucrase and starch granules. The modified larger starches not only have great benefit to the potato starch industry by reducing losses during starch isolation, but also have an advantage in many food applications such as frozen food due to its extremely high freeze-thaw stability.

Insights into the emulsification mechanism of the surfactant-like protein oleosin.

Oleosins are proteins with a unique central hydrophobic hairpin designed to stabilize lipid droplets (oleosomes) in plant seeds. For efficient droplet stabilization, the hydrophobic hairpin with a strong affinity for the apolar droplet core is flanked by hydrophilic arms on each side. This gives oleosins a unique surfactant-like shape making them a very interesting protein. In this study, we tested if isolated oleosins retain their ability to stabilize oil-in-water emulsions, and investigated the underlying stabilization mechanism. Due to their surfactant-like shape, oleosins when dispersed in aqueous buffers associated to micelle-like nanoparticles with a size of ∼33 nm. These micelles, in turn, clustered into larger aggregates of up to 20 µm. Micelle aggregation was more extensive when oleosins lacked charge. During emulsification, oleosin micelles and micelle aggregates dissociated and mostly individual oleosins adsorbed on the oil droplet interface. Oleosins prevented the coalescence of the oil droplets and if sufficiently charged, droplet flocculation as well.

Comment on "Three New Dimers and Two Monomers of Phenolic Amides from the Fruits of Lycium barbarum and Their Antioxidant Activities".

This Comment critically addresses the article by Gao et al. (Gao, K., et al. J. Agric. Food Chem. 2015, 63, 1067-1075), providing the structural elucidation of three phenolamide dimers (neolignanamides) from the fruits of Lycium barbarum. A more recent article published by Chen et al. (Chen, H., et al. J. Agric. Food Chem. 2023, 71, 11080-11093) incorporates these structures into further research on the bioactivity of these compounds. Although the analytical techniques used by Gao et al. are adequate, in our opinion, the nuclear magnetic resonance (NMR) spectroscopic data have not been interpreted correctly, resulting in incorrect structures for three neolignanamides from the fruits of L. barbarum. In this Comment, an alternative interpretation of the NMR spectroscopic data and the corresponding structures are proposed. The proposed structures feature linkage types that are much more common for neolignanamides than the linkage types in the originally reported structures of these compounds.

Exploring the formation of heterodimers of barley hydroxycinnamoylagmatines by oxidative enzymes.

Dimers of hydroxycinnamoylagmatines are phenolic compounds found in barley and beer. Although they are bioactive and sensory-active compounds, systematic reports on their structure-property relationships are missing. This is partly due to lack of protocols to obtain a diverse set of hydroxycinnamoylagmatine homo- and heterodimers. To better understand dimer formation in complex systems, combinations of the monomers coumaroylagmatine (CouAgm), feruloylagmatine (FerAgm), and sinapoylagmatine (SinAgm) were incubated with horseradish peroxidase. For all combinations, the main oxidative coupling products were homodimers. Additionally, minor amounts of heterodimers were formed, except for the combination of FerAgm and CouAgm. Oxidative coupling was also performed with laccases from Agaricus bisporus and Trametes versicolor, resulting in formation of the same coupling products and no formation of CouAgm-FerAgm heterodimers. Our protocol for oxidative coupling combinations of hydroxycinnamoylagmatines yielded a structurally diverse set of coupling products, facilitating production of dimers for future research on their structure-property relationships.

Barley-derived beer brewing by-products contain a high diversity of hydroxycinnamoylagmatines and their dimers.

To aid valorisation of beer brewing by-products, more insight into their composition is essential. We have analysed the phenolic compound composition of four brewing by-products, namely barley rootlets, spent grain, hot trub, and cold trub. The main phenolics detected were hydroxycinnamoylagmatines and dimers thereof. Barley rootlets contained the highest hydroxycinnamoylagmatine content and cold trub the highest dimer content. Additionally, variations in (dimeric) hydroxycinnamoylagmatine composition and content were observed in fourteen barley rootlet samples. The most abundant compound in all rootlets was the glycosylated 4-O-7'/3-8'-linked heterodimer of coumaroylagmatine and feruloylagmatine, i.e. CouAgm-4-O-7'/3-8'-(4'Hex)-DFerAgm. Structures of glycosylated and hydroxylated derivatives of coumaroylagmatine were elucidated by NMR spectroscopy after their purification from a rootlet extract. An MS-based decision tree was developed, which aids in identifying hydroxycinnamoylagmatine dimers in complex mixtures. In conclusion, this study shows that the diversity of phenolamides and (neo)lignanamides in barley-derived by-products is larger than previously reported.

Influence of emulsifier on lipid oxidation in spray-dried microencapsulated O/W emulsions.

Lipid oxidation limits the shelf-life of dried microencapsulated oils (DMOs), such as infant formula. However, it is poorly understood how lipid oxidation is affected by different types of emulsifiers. To improve our understanding, we prepared DMOs with different emulsifiers (whey protein isolate (WPI), pea protein isolate (PPI), and non-proteinaceous CITREM) and studied lipid oxidation in both the free and encapsulated fat. Only a small difference in oxidation rate was observed between these fat fractions for all formulations. We ascribed this to a non-discrete distribution of the fractions and the subsequent low fractionation selectivity as shown by Raman microscopy. The DMO with PPI showed hardly any oxidation during a 7-week incubation at 40 °C, whereas the DMOs with WPI and CITREM both reached significantly higher contents of oxidation products (lipid hydroperoxides, aldehydes, and epoxides). The enhanced stability of DMO-PPI could not be ascribed to the presence of phytic acid. In conclusion, we demonstrate the potential of using PPI to produce oxidatively stable DMOs.

Effects of the antimicrobial glabridin on membrane integrity and stress response activation in Listeria monocytogenes.

Glabridin is a prenylated isoflavan which can be extracted from liquorice roots and has shown antimicrobial activity against foodborne pathogens and spoilage microorganisms. However, its application may be hindered due to limited information about its mode of action. In this study, we aimed to investigate the mode of action of glabridin using a combined phenotypic and proteomic approach on Listeria monocytogenes. Fluorescence and transmission electron microscopy of cells exposed to glabridin showed membrane permeabilization upon treatment with lethal concentrations of glabridin. Comparative proteomics analysis of control cells and cells exposed to sub-lethal concentrations of glabridin showed upregulation of proteins related to the two-component systems LiaSR and VirRS, confirming cell envelope damage during glabridin treatment. Additional upregulation of SigmaB regulon members signified activation of the general stress response in L. monocytogenes during this treatment. In line with the observed upregulation of cell envelope and general stress response proteins, sub-lethal treatment of glabridin induced (cross)protection against lethal heat and low pH stress and against antimicrobials such as nisin and glabridin itself. Overall, this study sheds light on the mode of action of glabridin and activation of the main stress responses to this antimicrobial isoflavan and highlights possible implications of its use as a naturally derived antimicrobial compound.