Quantifying non-specific interactions via liquid chromatography.

Determinations of solute-cosolute interactions from chromatography have often resulted in problems, such as the "antibinding" (or a negative binding constant) between the solute and micelle in micellar liquid chromatography (MLC) or indeterminacy of salt-ligand binding strength in high-performance affinity chromatography (HPAC). This shows that the stoichiometric binding models adopted in many chromatographic analyses cannot capture the non-specific nature of solvation interactions. In contrast, an approach using statistical thermodynamics handles these complexities without such problems and directly links chromatographic data to, for example, solubility data via a universal framework based on Kirkwood-Buff integrals (KBI) of the radial distribution functions. The chromatographic measurements can now be interpreted within this universal theoretical framework that has been used to rationalize small solute solubility, biomolecular stability, binding, aggregation and gelation. In particular, KBI analysis identifies key solute-cosolute interactions, including excluded volume effects. We present (i) how KBI can be obtained directly from the cosolute concentration dependence of the distribution coefficient, (ii) how the classical binding model, when used solely as a fitting model, can yield the KBIs directly from the literature data, and (iii) how chromatography and solubility measurements can be compared in the unified theoretical framework provided via KBIs without any arbitrary assumptions about the stationary phase. To perform our own analyses on multiple datasets we have used an "app". To aid readers' understanding and to allow analyses of their own datasets, the app is provided with many datasets and is freely available on-line as an open-source resource.

The Physicochemical Characteristics of Prosthetic Materials and Their Influence on Their Clinical Properties.

The use of elastic materials favours degradation of their surface. The period of their clinical usefulness is then shortened, and their further utilisation in the oral cavity may have the reverse effect. The surface properties of such material as well as the influence of the humidity on their surface are very important as they determine the prosthetic materials behavior in the mouth. The surface of such material should be resistant to water. Inverse gas chromatography is an accurate, sensitive technique for studying surface properties. Thanks to using a unique equipment specially designed for IGC technique, Surface Energy Analyzer, it was possible to characterize the surface at 0 and 80% of humidity. Our results show that increased humidity does not affect surface properties of studied prosthetic materials. Their ability to dispersive and specific interactions change in very limited degree. IGC experiment was also applied for the estimation of Hansen solubility parameters that indicate ability of a material to dispersive, polar, and hydrogen-bonding interactions. Relation between the surface characteristics and practical use of soft lining materials with implications for their clinical usefulness is also discussed.

The influence of direct compression powder blend transfer method from the container to the tablet press on product critical quality attributes: a case study.

OBJECTIVE: The aim of this article is to compare the gravitational powder blend loading method to the tablet press and manual loading in terms of their influence on tablets' critical quality attributes (CQA). SIGNIFICANCE: The results of the study can be of practical relevance to the pharmaceutical industry in the area of direct compression of low-dose formulations, which could be prone to content uniformity (CU) issues. METHODS: In the preliminary study, particle size distribution (PSD) and surface energy of raw materials were determined using laser diffraction method and inverse gas chromatography, respectively. For trials purpose, a formulation containing two pharmaceutical ingredients (APIs) was used. Tablet samples were collected during the compression progress to analyze their CQAs, namely assay and CU. RESULTS: Results obtained during trials indicate that tested direct compression powder blend is sensitive to applied powder handling method. Mild increase in both APIs content was observed during manual scooping. Gravitational approach (based on discharge into the drum) resulted in a decrease in CU, which is connected to a more pronounced assay increase at the end of tableting than in the case of manual loading. CONCLUSIONS: The correct design of blend transfer over single unit processes is an important issue and should be investigated during the development phase since it may influence the final product CQAs. The manual scooping method, although simplistic, can be a temporary solution to improve the results of API's content and uniformity when compared to industrial gravitational transfer.

Activation of Magnesium Lignosulfonate and Kraft Lignin: Influence on the Properties of Phenolic Resin-Based Composites for Potential Applications in Abrasive Materials.

Magnesium lignosulfonate and kraft lignin were activated by different oxidizing agents for use in phenolic resin composites used for the production of abrasive components. The physicochemical properties of the oxidized materials were analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), dynamic mechanical-thermal analysis (DMTA) and inverse gas chromatography (IGC). The homogeneity of the model abrasive composites containing the studied products was assessed based on observations obtained using a scanning electron microscope (SEM). FTIR and XPS analysis of the oxidized products indicated that the activation process leads mainly to the formation of carbonyl groups. The IGC technique was used to assess changes in the surface energy and the acid-base properties of the studied biopolymers. The changes in the acid-base properties suggest that more groups acting as electron donors appear on the oxidized surface of the materials. DMTA studies showed that the model composites with 5% magnesium lignosulfonate oxidized by H2O2 had the best thermomechanical properties. Based on the results it was possible to propose a hypothetical mechanism of the oxidation of the natural polymers. The use of such oxidized products may improve the thermomechanical properties of abrasive articles.

Characteristics of Multifunctional, Eco-Friendly Lignin-Al2O3 Hybrid Fillers and Their Influence on the Properties of Composites for Abrasive Tools.

The main aim of the present study was the preparation and comprehensive characterization of innovative additives to abrasive materials based on functional, pro-ecological lignin-alumina hybrid fillers. The behavior of lignin, alumina and lignin-Al2O3 hybrids in a resin matrix was explained on the basis of their surface and application properties determined by inverse gas chromatography, the degree of adhesion/cohesion between components, thermomechanical and rheological properties. On the basis of the presented results, a hypothetical mechanism of interactions between lignin and Al2O3 as well as between lignin-Al2O3 hybrids and phenolic resins was proposed. It was concluded that lignin compounds can provide new, promising properties for a phenolic binder combining the good properties of this biopolymer as a plasticizer and of alumina as a filler improving mechanical and thermal properties. The use of such materials may be relatively non-complicated and efficient way to improve the performance of bonded abrasive tools.

Reactive Diazonium-Modified Silica Fillers for High-Performance Polymers.

We describe a simple way of modification of three silica-based fillers with in situ generated 4-hydroxymethylbenzenediazonium salt (+N2-C6H4-CH2OH). The rationale for using a hydroxyl-functionalized diazonium salt is that it provides surface-functionalized fillers that can react with phenolic resins. The modification of silica by diazonium salts was assessed using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). FTIR spectroscopy permitted the tracking of benzene ring breathing and C-C. The absence of the characteristic N≡N stretching vibration in the 2200-2300 cm-1 range indicates the loss of the diazonium group. XPS results indicate a higher C/Si atomic ratio after the diazonium modification of fillers and the presence of π-π* C1s satellite peaks characteristic of the surface-tethered aromatic species. Adhesion of aryl layers to the silicas is excellent because they withstand harsh thermal and organic solvent treatments. Phenolic resins (used, for example, as binders in abrasive products) were filled with diazonium-modified silicas at 10-25 wt %. The reactivity of the fillers toward phenolic resins was evaluated by the determination of the flow distance. After annealing at 180 °C, the diazonium-modified silica/phenolic resin composites were mechanically tested using the three-point flexural method. The flexural strength was found to be up to 35% higher than that of the composites prepared without any diazonium salts. Diazonium-modified silica with surface-bound -CH2-OH groups is thus ideal reactive filler for phenolic resins. Such filler ensures interfacial chemical reactions with the matrix and imparts robust mechanical properties to the final composites. This specialty diazonium-modified silica will find potential application as fillers in the composites for the abrasive industry. More generally, aryl diazonium salts are a unique new series of compounds for tailoring the surface properties of fillers and tuning the physicochemical and mechanical properties of polymer composites.

Application of Inverse Liquid Chromatography for Surface Characterization of Biomaterials.

In the present study, a novel approach for surface characterization of ceramic biomaterials is proposed. Two ceramic biomaterials-hydroxyapatite and ß-tricalcium phosphate-were examined by means of inverse liquid chromatography. The Abraham LFER model was applied for physicochemical characteristics of the surface. Different compounds, characterized by different polarity and different donor-acceptor properties of functional group, were used as test solutes. The chromatographic experiments were carried out with two compositions of the mobile phase: pure acetonitrile (MeCN) and the mixture of acetonitrile and water in 80:20 ratio (MeCN/H2O). Thus, the influence of mobile phase on sorption properties of hydroxyapatite and tricalcium phosphate surface was also discussed.

Preparation of hybrid materials for controlled drug release.

Authors obtained hybrid organic-inorganic materials applied in sustained drug delivery. The materials are ibuprofen as a model drug, hydroxyapatite and three different polymers as supports. Influence of the type of employed polymer, an inorganic carrier, on the properties and drug release profiles was estimated. Flory-Huggins interaction parameters, the dispersive component of surface free energy and acid-base characteristic of the surface were used to assess the behavior of the composites in terms of drug release. The experiments were carried out with the use of inverse gas chromatography (IGC), Fourier transform infrared (FTIR) and ultraviolet (UV) techniques. FTIR and ATR-FTIR spectra were collected. The values of [Formula: see text] parameter obtained for all investigated materials (excluding poly(L-lactide) (PLA2)) indicate low or medium activity. The strongest interactions (the lowest values of the Flory-Huggins [Formula: see text] parameter) are observed for PLA2 composition, while the weakest interactions for systems with polyethylene glycol (PEG). Finally, drug release profiles are shown. For materials prepared with Eudragit® (EUD) and PLA, the release of drug was much smaller, which corresponds to lower values of Flory-Huggins parameter. The executed experiments allowed the estimation of the properties of prepared composites. Prepared materials present properties required in sustained drug release and may be successfully applied as drug delivery systems.

Gelatin-Zinc Carrier as a New Method of Targeted and Controlled Release of Risedronate.

The essence of drug delivery is to use an appropriate carrier that delivers the active substance to the appropriate pathogenic site at a specific time. This study aims to develop a novel drug carrier characterized by the controlled and targeted release of risedronate (RSD). The search for new routes to deliver RSD is important because oral delivery has many disadvantages. The carrier proposed in this work is composed of gelatin, polyphosphates, and zinc. The zinc contained in the carrier is responsible for coordinating the drug. The resulting material releases RSD in a controlled manner. The rate of delivery of the substance to the body depends on the pH of the environment. This study investigated the delivery of RSD in a neutral environment, where the process exhibited a prolonged and consistent release rate. This process has also been studied in an acidic environment, which accelerates the release of the drug. Mixed-environment studies were also conducted. Initially, the drug was released in a neutral environment, and then the conditions rapidly changed to acidic. In this case, the carrier demonstrated high stability and controlled release, adapting the rate of drug release to the prevailing environmental conditions. The presented results indicate the great potential of the new gelatin-based carrier in the delivery of risedronate.

Zinc-doped hydroxyapatite as a pH responsive drug delivery system for anticancer drug 6-mercaptopurine.

6-Mercaptopurine (6MP) is commonly used in the treatment of acute lymphoblastic leukemia as an important agent in maintenance therapy. Despite its therapeutic benefits, 6MP has some limitations during therapy. Taking into account the disadvantages during 6MP therapy, there is a great need to create an appropriate delivery system for this drug. 6MP contains in its structure nitrogen and sulfur atoms capable of forming coordination compounds with metal ions, for example zinc. Therefore, in this work, we prepared biocompatible hydroxyapatite (HAp) doped with zinc ions, and used it as a carrier for 6MP. Doped HAp has not been used as a carrier for this drug before. The work proved that the prepared carrier-drug system has a particle size of about 130 nm, which indicates its potential for intravenous delivery. In addition, in an acidic environment (imitating cancer cells), the carrier agglomerates allow targeted release of the drug. The drug is evenly distributed, which indicates that the doses released from it will always be comparable. The release of the drug in a neutral environment is long-lasting in controlled doses, whereas in an acidic environment it is immediate. The obtained results indicate the high potential of the material in both slow-release and cancer-targeted release of 6MP.

Determination of bisphosphonate properties in terms of bioavailability, bone affinity, and cytotoxicity.

BACKGROUND: The study aimed to evaluate the therapeutic potential of fourteen newly synthesized bisphosphonates by assessing their bioavailability, bone affinity, and cytotoxicity. These bisphosphonates included a series of aminomethylenebisphosphonates and standard compounds such as risedronate and tiludronate. METHODS: Drug permeability was determined using Parallel Artificial Membrane Permeability Assays (PAMPA), while bone affinity was assessed by sorption on hydroxyapatite. Bacterial cell response to the bisphosphonates was also examined using Lactobacillus paracasei cells as a model. RESULTS: Several tested compounds, including BP3 to BP8 and BP11, which feature substituents in the pyridine ring such as methyl groups, iodine, bromine, chlorine, or hydroxyl groups, demonstrated potentially more beneficial therapeutic properties than commercially used bisphosphonates. These compounds showed stronger bone affinity and higher gastrointestinal absorption with comparable or lower cytotoxic effects. Specifically, BP11 exhibited the highest bone affinity, while BP8 and BP11 showed the greatest permeability. CONCLUSIONS: The findings suggest that BP3 BP8, and BP11 are promising candidates for further research. These results highlight the importance of comprehensively evaluating bisphosphonates' therapeutic properties to identify effective treatments for osteoporosis and other bone diseases.

Estimation of the breakthrough volume of selected steroids for C-18 solid-phase extraction sorbent using retention data from micro-thin layer chromatography.

SPE method is a very popular technique, and is commonly used for the prepurification, concentration, and isolation of different organic compounds from variable matrices. In this work, the optimization of SPE process was carried out. The breakthrough volume of solid sorbents based on octadecylsilane was determined and three methods were compared: (1) calculation one - the breakthrough volume was calculated using retention factor k determined with micro-TLC method, frontal analysis - (2) breakthrough volume was determined as volume of whole elution peak, and (3) breakthrough volume was determined as the center of peak gravity. For calculation method, the k values of key estrogens and progestogens were derived from the micro-TLC experiment reported previously. By combining these three methods, we can point the start of elution, the maximum concentration of analyte in eluate, and the whole eluent volume, which is necessary to achieve an appropriate selectivity and high extraction recovery. Proposed calculation method allows to estimate the beginning of the steroid peak, when the analyte appears in the eluate flowing from the sorbent. Such observation advances the SPE optimization protocol that was described before and was based on the correlation between raw k(SPE) and k(micro-TLC) data.

Zeolites with Divalent Ions as Carriers in the Delivery of Epigallocatechin Gallate.

Epigallocatechin gallate (EGCG) is a compound with very high therapeutic potential in the treatment of osteoporosis and cancer. The disadvantages of this compound are its low stability and low bioavailability. Therefore, carriers for EGCG are sought to increase its use. In this work, new carriers are proposed, i.e., zeolites containing divalent ions of magnesium, calcium, strontium, and zinc in their structure. EGCG is retained on the carrier surface by strong interactions with divalent ions. Due to the presence of strong interactions, EGCG is released in a controlled manner from the carrier-ion-EGCG drug delivery system. The results obtained in this work confirm the effectiveness of the preparation of new carriers. EGCG is released from the carriers depending on the pH; hence, it can be used both in osteoporosis and in the treatment of cancer. The divalent ion used affects the sorption and release of the drug. The obtained results indicate the great potential of the proposed carriers and their advantage over the carriers described in the literature.

Characterization of Magnesium and Zinc Forms of Sodalite Coatings on Ti6Al4V ELI for Potential Application in the Release of Drugs for Osteoporosis.

Osteoporosis is the most common metabolic disease of the skeletal system and is characterized by impaired bone strength. This translates into an increased risk of low-energy fractures, which means fractures caused by disproportionate force. This disease is quite insidious, its presence is usually detected only at an advanced stage, where treatment with pharmaceuticals does not produce sufficient results. It is obligatory to replace the weakened bone with an implant. For this reason, it is necessary to look at the possibilities of surface modification used in tissue engineering, which, in combination with the drugs for osteoporosis, i.e., bisphosphonates, may constitute a new and effective method for preventing the deterioration of the osteoporotic state. To achieve this purpose, titanium implants coated with magnesium or zinc zeolite were prepared. Both the sorption and release profiles differed depending on the type of ion in the zeolite structure. The successful release of risedronate from the materials at a low level was proven. It can be concluded that the proposed solution will allow the preparation of endoprostheses for patients with bone diseases such as osteoporosis.

Surface Modification of Ti6Al4V ELI Titanium Alloy by Poly(ethylene-alt-maleic anhydride) and Risedronate Sodium.

With the simultaneous increase in the number of endoprostheses being performed, advances in the field of biomaterials are becoming apparent-whereby the materials and technologies used to construct implants clearly improve the implants' quality and, ultimately, the life of the patient after surgery. The aim of this study was to modify the titanium alloy Ti6Al4V ELI used in the construction of hip joint endoprostheses. This is why the continuous development of biomaterials is so important. This paper presents the results of research for a new application of polymer poly(ethylene-alt-maleic anhydride) as a drug release layer, placed on the surface of a titanium alloy. The obtained layers were analyzed using Raman spectroscopy (spectra and maps), Fourier transform infrared spectroscopy (spectra and maps), contact angle measurements as well as scanning electron microscopy and energy dispersive spectroscopy imaging and topography analysis. The results confirmed that the polymer layer obtained on the plate surface after the alkali heat treatment process is much better-it binds much more polymer and thus the applied drug. In addition, a longer and more gradual release of the drug was observed for the alkali heat treatment modification than for H2O2 solution.

Release of drugs used in the treatment of osteoporosis from zeolites with divalent ions-Influence of the type of ion and drug on the release profile.

Bisphosphonates are drugs that are used to treat osteoporosis that causes the low mineral density of the bones. These drugs can be delivered in several ways, but each method has disadvantages. Materials with high potential as carriers of these drugs are zeolites with divalent ions. The aim of this study was to investigate the effect of divalent cations (calcium, magnesium, zinc) and drug type (risedronate, zoledronate) on sorption and release of the drug for osteoporosis. It was proved that drug sorption occurs on all zeolites presented in this work. Risedronate sorption was highest in zinc zeolite and lowest in calcium zeolite. In the case of zoledronate, sorption was most effective in magnesium zeolite and the least effective in zinc zeolite. Very large differences in drug release profiles were also observed. Risedronate was released several times longer than zoledronate. The diversity of the results indicates that the examined materials can be used in different types of drug delivery systems. They can be used, for example, intravenously or in the form of implants due to the different release profiles. Furthermore, the proposed carriers also release magnesium and calcium ions which are used in the prevention of osteoporosis, and zinc ions which have antibacterial properties.

Mesoporous Silica Modified with Polydopamine and Zinc Ions as a Potential Carrier in the Controlled Release of Mercaptopurine.

Mercaptopurine is one of the drugs used in the treatment of acute lymphoblastic leukemia. A problem with mercaptopurine therapy is its low bioavailability. This problem can be solved by preparing the carrier that releases the drug in lower doses but over a longer period of time. In this work, polydopamine-modified mesoporous silica with adsorbed zinc ions was used as a drug carrier. SEM images confirm the synthesis of spherical carrier particles. The particle size is close to 200 nm, allowing for its use in intravenous delivery. The zeta potential values for the drug carrier indicate that it is not prone to agglomeration. The effectiveness of drug sorption is indicated by a decrease in the zeta potential and new bands in the FT-IR spectra. The drug was released from the carrier for 15 h, so all of the drug can be released during circulation in the bloodstream. The release of the drug from the carrier was sustained, and no 'burst release' was observed. The material also released small amounts of zinc, which are important in the treatment of the disease because these ions can prevent some of the adverse effects of chemotherapy. The results obtained are promising and have great application potential.

Chitosan modified with lanthanum ions as implantable hydrogel for local delivery of bisphosphonates.

Osteoporosis is a disease that affects many people around the world. One group of drugs used to treat it are bisphosphonates. However, they have poor bioavailability and many side effects. Therefore, research around the world is focused on developing bisphosphonate delivery systems. In this paper, we would like to present the design of a hydrogel material with chitosan matrix modified with lanthanum, that could serve as an implantable hydrogel capable of sustained and slow release of Zoledronate. Various research techniques were used to characterize the materials, and the swelling ratio and water solubility were also tested. The conducted research proved that the prepared hydrogel is capable of the long-term release of the Zoledronate. Thanks to this, the prepared material can be successfully used as an implantable hydrogel or a coating on titanium implants for the local delivery of drugs.

Double Hydroxyl Salt as Smart Biocompatible pH-Responsive Carrier for 6-Mercaptopurine.

Hydroxy double salts are layered materials that are considered to be biocompatible. For this reason, research has been initiated on the possibility of their use in drug delivery. Despite their use for several types of drugs, their potential for controlled release of mercaptopurine (MERC) has not been studied. In this work, the synthesized hydroxy double salt (HDS) material was used as a carrier for this drug for the first time. The effectiveness of HDS synthesis has been proven by such techniques as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Based on the FT-IR and energy-dispersive X-ray spectroscopy (EDS) results, the effectiveness of drug sorption was proven. The exact amount of drug retained was determined by the UV-Vis technique. The obtained results indicate that the drug is evenly distributed on the surface of the carrier, which is important during the controlled delivery of drugs. In the most important stage of the research, the effectiveness of drug release in response to changes in the pH of the environment was proven. The drug is not released into an environment that mimics healthy human tissues. It is released only after contact with the acidic environment that usually surrounds cancer cells. The low cellular toxicity of HDS and significant cytotoxic effect of HDS-MERC were confirmed by in vitro studies on MCF-7 human breast and DU145 prostate cancer cell lines and non-cancerous keratinocytes HaCaT. Interestingly, coupling with the HDS carrier increased the cytotoxic effect of MERC towards DU145 cells. Such an "intelligent" drug carrier for mercaptopurine has not been previously described in the literature. The obtained results indicate its great potential.

Chitosan hydrogel modified with lanthanum as a drug delivery system for epigallocatechin gallate: Investigation of hydrogel - drug interaction by FT-IR and Raman spectroscopy.

In the presented work, chitosan hydrogel modified with lanthanum was obtained for the first time. The hydrogel was used as a carrier in the controlled release of epigallocatechin gallate. The work proved the effectiveness of drug sorption by hydrogel and controlled release in simulated body fluids. The drug was released slowly and in a controlled manner from the carrier. The research techniques used in this work (FT-IR spectroscopy and imaging, Raman spectroscopy, SEM/EDS) allowed to confirm the successful retention of EGCG on the hydrogel surface. On the basis of the EDS mapping, it was possible to confirm the even distribution of the lanthanum ions. Using FT-IR imaging, we verified that the drug was evenly distributed on the entire surface of the prepared material. The antifungal effectiveness of the material has been proven on several types of fungi. The research proved that the prepared material is capable of long-term release of the active substance and has antifungal properties. As a result, the prepared material can be successfully used as an implantable hydrogel or a coating in, e.g. titanium implants.