RESUMEN
The design and fabrication of novel carbon hosts with high conductivity, accelerated electrochemical catalytic activities, and superior physical/chemical confinement on sulfur and its reaction intermediates polysulfides are essential for the construction of high-performance C/S cathodes for lithium-sulfur batteries (LSBs). In this work, a novel biofermentation coupled gel composite assembly technology is developed to prepare cross-linked carbon composite hosts consisting of conductive Rhizopus hyphae carbon fiber (RHCF) skeleton and lamellar sodium alginate carbon (SAC) uniformly implanted with polarized nanoparticles (V2O3, Ag, Co, etc.) with diameters of several nanometers. Impressively, the RHCF/SAC/V2O3 composites exhibit enhanced physical/chemical adsorption of polysulfides due to the synergistic effect between hierarchical pore structures, heteroatoms (N, P) doping, and polar V2O3 generation. Additionally, the catalytic conversion kinetics of cathodes are effectively improved by regulating the 3D carbon structure and optimizing the V2O3 catalyst. Consequently, the LSBs assembled with RHCF/SAC/V2O3-S cathode show exceptional cycle stability (capacity retention rate of 94.0% after 200 cycles at 0.1 C) and excellent rate performance (specific capacity of 578 mA h g-1 at 5 C). This work opens a new door for the fabrication of hyphae carbon composites via fermentation for electrochemical energy storage.
RESUMEN
All-solid-state lithium metal batteries (LMBs) are regarded as one of the most viable energy storage devices and their comprehensive properties are mainly controlled by solid electrolytes and interface compatibility. This work proposes an advanced poly(vinylidene fluoride-hexafluoropropylene) based gel polymer electrolyte (AP-GPEs) via functional superposition strategy, which involves incorporating butyl acrylate and polyethylene glycol diacrylate as elastic optimization framework, triethyl phosphate and fluoroethylene carbonate as flameproof liquid plasticizers, and Li7La3Zr2O12 nanowires (LLZO-w) as ion-conductive fillers, endowing the designed AP-GPEs/LLZO-w membrane with high mechanical strength, excellent flexibility, low flammability, low activation energy (0.137 eV), and improved ionic conductivity (0.42 × 10-3 S cm-1 at 20 °C) due to continuous ionic transport pathways. Additionally, the AP-GPEs/LLZO-w membrane shows good safety and chemical/electrochemical compatibility with the lithium anode, owing to the synergistic effect of LLZO-w filler, flexible frameworks, and flame retardants. Consequently, the LiFePO4/Li batteries assembled with AP-GPEs/LLZO-w electrolyte exhibit enhanced cycling performance (87.3% capacity retention after 600 cycles at 1 C) and notable high-rate capacity (93.3 mAh g-1 at 5 C). This work proposes a novel functional superposition strategy for the synthesis of high-performance comprehensive GPEs for LMBs.
RESUMEN
The design and fabrication of a lithiophilic skeleton are highly important for constructing advanced Li metal anodes. In this work, a new lithiophilic skeleton is reported by planting metal sulfides (e.g., Ni3S2) on vertical graphene (VG) via a facile ultrafast Joule heating (UJH) method, which facilitates the homogeneous distribution of lithiophilic sites on carbon cloth (CC) supported VG substrate with firm bonding. Ni3S2 nanoparticles are homogeneously anchored on the optimized skeleton as CC/VG@Ni3S2, which ensures high conductivity and uniform deposition of Li metal with non-dendrites. By means of systematic electrochemical characterizations, the symmetric cells coupled with CC/VG@Ni3S2 deliver a steady long-term cycle within 14 mV overpotential for 1800 h (900 cycles) at 1 mA cm-2 and 1 mAh cm-2. Meanwhile, the designed CC/VG@Ni3S2-Li||LFP full cell shows notable electrochemical performance with a capacity retention of 92.44% at 0.5 C after 500 cycles and exceptional rate performance. This novel synthesis strategy for metal sulfides on hierarchical carbon-based materials sheds new light on the development of high-performance lithium metal batteries (LMBs).
RESUMEN
"Carbon Peak and Carbon Neutrality" is an important strategic goal for the sustainable development of human society. Typically, a key means to achieve these goals is through electrochemical energy storage technologies and materials. In this context, the rational synthesis and modification of battery materials through new technologies play critical roles. Plasma technology, based on the principles of free radical chemistry, is considered a promising alternative for the construction of advanced battery materials due to its inherent advantages such as superior versatility, high reactivity, excellent conformal properties, low consumption and environmental friendliness. In this perspective paper, we discuss the working principle of plasma and its applied research on battery materials based on plasma conversion, deposition, etching, doping, etc. Furthermore, the new application directions of multiphase plasma associated with solid, liquid and gas sources are proposed and their application examples for batteries (e. g. lithium-ion batteries, lithium-sulfur batteries, zinc-air batteries) are given. Finally, the current challenges and future development trends of plasma technology are briefly summarized to provide guidance for the next generation of energy technologies.
RESUMEN
High-performance lithium metal anodes are crucial for the development of advanced Li metal batteries. Herein, this work reports a novel plasma coupled electrolyte additive strategy to prepare high-quality composite solid electrolyte interphase (SEI) on Li metal to achieve enhanced performance and stability. With the guidance of calculations, this work selects diethyl dibromomalonate (DB) as an additive to optimize the solvation structure of electrolytes to modify the SEI. Meanwhile, this work groundbreakingly develops DB plasma technology coupled with DB electrolyte additive to construct a combinatorial SEI: inner plasma-induced SEI layer composed of LiBr and Li2CO3 plus additive-reduced SEI containing LiBr/Li2CO3/organic lithium compounds as an outer compatible layer. The optimized hybrid SEI has strong affinity toward Li+ and good mechanical properties, thereby inducing horizontal dispersion and uniform deposition of Li+ and keep structure stable. Accordingly, the symmetrical cells exhibit enhanced cycling stability for 1200 h at an overpotential of 23.8 mV with average coulombic efficiency (99.51%). Additionally, the full cells with LiNi0.8Co0.1Mn0.1O2 cathode deliver a capacity retention of 81.7% after 300 cycles at 0.5 C, and the pouch cell achieves a volumetric specific energy of ≈664 Wh Lâ1. This work provides new enlightenment on plasma technology for fabrication of advanced metal anodes for energy storage.
RESUMEN
The construction of high-quality carbon-based energy materials through biotechnology has always been an eager goal of the scientific community. Herein, juice vesicles bioreactors (JVBs) bio-technology based on hesperidium (e.g., pomelo, waxberry, oranges) is first reported for preparation of carbon-based composites with controllable components, adjustable morphologies, and sizes. JVBs serve as miniature reaction vessels that enable sophisticated confined chemical reactions to take place, ultimately resulting in the formations of complex carbon composites. The newly developed approach is highly versatile and can be compatible with a wide range of materials including metals, alloys, and metal compounds. The growth and self-assembly mechanisms of carbon composites via JVBs are explained. For illustration, NiCo alloy nanoparticles are successfully in situ implanted into pomelo vesicles crosslinked carbon (PCC) by JVBs, and their applications as sulfur/carbon cathodes for lithium-sulfur batteries are explored. The well-designed PCC/NiCo-S electrode exhibits superior high-rate properties and enhanced long-term stability. Synergistic reinforcement mechanisms on transportation of ions/electrons of interface reactions and catalytic conversion of lithium polysulfides arising from metal alloy and carbon architecture are proposed with the aid of DFT calculations. The research provides a novel biosynthetic route to rational design and fabrication of carbon composites for advanced energy storage.
RESUMEN
Heavy metals from slag waste (HMSWs) have attracted much attention because of their serious toxicity to the environment and human organs, especially hepatotoxicity. The aim of this study was to explore the effects of different HMSWs exposure on mitochondrial lipid peroxidation, microsomal drug metabolizing enzyme activities as well as their relationship in the rat liver injury. Based on toxicogenomic analysis, heavy metals including iron, copper, cobalt, nickel and manganese, might interfere with pathophysiological processes such as oxidative stress, cell death, and energy metabolism regulation in vivo, and participate in the regulation of HIF-1 signaling pathway, peroxisomes, drug metabolism-cytochrome P450, ferroptosis, and other signaling pathways. HMSWs exposure caused weight loss, and significantly increased lactate dehydrogenase (LDH), malondialdehyde (MDA), alanine transaminase (ALT), and aspartate transaminase (AST) in different groups of rat liver, suggesting the presence of mitochondrial lipid peroxidation damage. In addition, the ratios of AST/ALT and ALT/LDH were down-regulated, especially the ALT/LDH ratios were less than 1, indicating that hepatic ischemic injury occurred in the process of liver injury. The superoxide dismutase (SOD) and mitochondrial membrane potential (MMP) activities in rats also showed significant decreases, indicating the occurrence of hepatic oxidative/antioxidant dysfunction imbalance. Further decision tree analysis of live biochemical abnormalities suggested that AST > 58.78 U/gprot and MDA > 173.2 nmol/mgprot could be used for hepatotoxicity warning. Liver microsomal cytochrome P4501A2 (CYP1A2) and 3A1 (CYP3A1) enzymes were also involved in the hepatotoxic process of heavy metals. These results suggest that lipid peroxidation damage and metabolic damage in liver mitochondria and peroxisomes, may be one of the key events in heavy metal-induced liver injury.
Asunto(s)
Antioxidantes , Enfermedad Hepática Inducida por Sustancias y Drogas , Ratas , Humanos , Animales , Peroxidación de Lípido , Antioxidantes/metabolismo , Estrés Oxidativo , Hígado/metabolismo , Alanina Transaminasa/metabolismo , Aspartato Aminotransferasas/metabolismo , Aspartato Aminotransferasas/farmacología , Hierro/metabolismo , Enfermedad Hepática Inducida por Sustancias y Drogas/metabolismoRESUMEN
Developing high-efficiency and easy machining components, as well as high-performance energy storage components, is a pressing issue on the road to economic and social progress. Optimizing the interface compatibility between composites and promoting the efficient utilization of the electrochemical active sites are crucial factors in improving the electrochemical performance of composite electrode materials. To address this challenge, a carbon-based flexible lithium-ion supercapacitor positive material (Polyaniline @ Carbon Foam-Supercritical carbon dioxide (P@C-SC)) is synthesized using commercial melamine foam and aniline monomer. The synthesis process utilizes supercritical fluid technology, effectively solving the interface compatibility problem between the composite materials. Consequently, the electrochemical performance of the composite electrode materials is significantly improved. The supercapacitive properties of this material are investigated in 1 mol/L sulfuric acid (H2SO4) and lithium sulfate (Li2SO4) electrolytes using a three-electrode system. In H2SO4 electrolyte, the material exhibits a working voltage of up to 2.2 V and a specific capacitance of 898F/g (at 1 A/g), resulting in a maximum energy density of 50.8 Wh kg-1. Furthermore, this electrode demonstrates superior lithium storage performance, with a specific capacity of approximately 900 mAh/g (at 1 A/g) and a retention of about 400 mAh/g after 200 cycles, along with a coulomb efficiency of 100%. This work offers insights into the integrated design of composite materials with improved electrochemical properties and interface compatibility, thus providing potential applicability of supercritical fluids in the field of lithium-ion supercapacitors.
RESUMEN
Goose down and duck down have very similar appearance but the quality of goose down is better than that of duck down in general. There is a highest allowable limit as specified by the various national standards of feather and down for the percentage of duck feather or down mixed in goose feather or down. Traditional detection method, manual inspection with a high-scale microscope, is labor intensive and not suitable for large-volume samples analysis and on-site rapid testing. In the present paper, visible/near-infrared (NIR) spectroscopy combined with successive projection algorithm (SPA) for characteristic wavelengths selection was used to determinate the content of duck down mixed in goose down. In the range of 450-930 nm, the multiple linear regression (MLR) model established with the 8 characteristic wavelengths selected by SPA achieved good prediction, the correlation coefficient of 0.983, root mean square error of calibration (RMSEC) of 5.44%, and root mean square error of prediction (RMSEP) of 5.75%. Therefore, it is expected to be used for rapid detection of feather and down quality in future.
Asunto(s)
Patos , Plumas , Gansos , Espectroscopía Infrarroja Corta , Algoritmos , Animales , Modelos Lineales , Modelos TeóricosRESUMEN
An effective method was established for the determination and classification of flammable liquids by headspace gas chromatography-mass spectrometry (HS-GC-MS). The volatile components, equilibrium temperature and equilibrium time of gravure ink were investigated. The volatile components of flammable liquids were identified by comparison with the standard mass spectrum databases, and quantified by the external standard method. The recoveries were in the range of 92.8%-103.1% with the relative standard deviations between 0.88% and 2.88%. The flash points of the samples were calculated by a prediction model and compared with the experimentally measured values. The results showed that the maximum deviation between the predicted and measured flash points was 3.2â. This method provides a novel, efficient and convenient way for the classification of flammable liquids.
RESUMEN
The infectious bursal disease virus (IBDV), a member of the Birnaviridae family, containing a bisegmented double-stranded RNA genome, encodes four structural viral proteins, VP1, VP2, VP3, and VP4, as well as a non-structural protein, VP5. In the present paper, the segment A from two IBDV strains, field isolate ZJ2000 and attenuated strain HZ2, were inserted into one NaeI site by site-directed silent mutagenesis and subcloned into the eukaryotic expression plasmid pCI under the control of the human cytomegalovirus (hCMV) immediate early enhancer and promoter to construct the recombinant plasmids pCI-AKZJ2000 and pCI-AKHZ2, respectively. Each of the two recombinants was combined with another recombinant pCI plasmid containing the marked segment B of strain HZ2 (pCI-mB), and injected intramuscularly into non-immunized chickens. Two chimeric IBDV strains were recovered from the chickens. Two out of eight chickens in each of two groups showed the bursal histopathological change. The reassortant virus derived from pCI-AKZJ2000/pCI-mB can infect chicken embryos and shows relatively low virulence. We have developed a novel virus reverse genetic approach for the study of IBDV. The results also form the basis for investigating the role of VP1 in viral replication and pathogenecity.
Asunto(s)
Infecciones por Birnaviridae/virología , Pollos/virología , Clonación de Organismos/métodos , Ingeniería Genética/métodos , Virus de la Enfermedad Infecciosa de la Bolsa/genética , Virus de la Enfermedad Infecciosa de la Bolsa/patogenicidad , Virus Reordenados/genética , Virus Reordenados/patogenicidad , Animales , Embrión de Pollo , Inyecciones , Mutagénesis Sitio-Dirigida/genética , Mutación/genética , Especificidad de la EspecieRESUMEN
To evaluate the characteristics of chicken interleukin-18 (ChIL-18) in different forms in vitro, the ChIL-18 full-length gene (ChIL-18-F) and the ChIL-18 presumed mature protein gene (ChIL-18-M) were cloned and inserted into the eukaryotic expression vector pCI, to construct recombinant pCI-ChIL-18-F and pCI-ChIL-18-M. The recombinant plasmids were then transferred into chicken splenic lymphocytes (CSLs). Western blot showed that ChIL-18-F, with a molecular weight of 23.0 kDa, was produced in CSLs transfected by pCI-ChIL-18-F; ChIL-18-M, with a molecular weight of 19.5 kDa, was produced in CSLs transfected by pCI-ChIL-18-M. The nitric oxide (NO) level in the transfected CSLs and the culture medium at different time points was further examined under confocal microscopy using 4,5-diaminofluorescein staining. The results showed that both pCI-ChIL-18-F and pCI-ChIL-18-M groups showed significant increase in intracellular and extracellular NO production compared with pCI transfected control cells. These results suggest that both ChIL-18-F and ChIL-18-M could stimulate NO secretion in CSLs. To characterize the intracellular distribution of ChIL-18, ChIL-18-F and ChIL-18-M were each fused to the enhanced green fluorescent protein gene, and expressed in Vero cells. The results showed that the ChIL-18-F tended to the membranous region in Vero cells, while ChIL-18-M did not. This indicates that the N-terminal 27 amino acid peptide helped ChIL-18 target to Vero cell membranes.